Commit graph

1816 commits

Author SHA1 Message Date
Jouni Malinen
47eac38a63 tests: Add AP Location Public Identifier into gas_anqp_extra_elements
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-21 11:56:56 +02:00
Jouni Malinen
f2dfb1dafa tests: GAS fragmentation and comeback delay
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-20 21:07:33 +02:00
Jouni Malinen
70f2a3f4ab tests: GAS fragmentation with mac80211_hwsim MCC enabled
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-20 21:07:33 +02:00
Jouni Malinen
35c146bc1b tests: Update gas_anqp_oom_hapd to match new implementation
Since wpa_supplicant is now retrying GAS comeback failures once, the
gas_anqp_oom_hapd test case started failing. Fix this by updating the
test case to expect success (on the retry).

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-20 21:07:33 +02:00
Jouni Malinen
f9a9304479 tests: Modify gas_malformed_comeback_resp to allow GAS retries
This is in preparation of a wpa_supplicant change to allow GAS retries
which can result in the previous test case design showing failures due
to "unexpected" management frames (GAS Initial Request from the retry).

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-20 21:07:33 +02:00
Jouni Malinen
d5f5d260b8 tests: EAP-PEAP phase1 TLS flags
This adds some more test coverage for phase1 parameters that had not
previously been included in any of the test cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-20 17:36:51 +02:00
Jouni Malinen
5382712518 tests: EAP-TTLS with unsupported Phase 2 EAP method in configuration
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-20 17:33:03 +02:00
Jouni Malinen
7cb27f89f2 tests: EAP-TLS and TLS Message Length in unfragmented packets
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-20 17:25:41 +02:00
Jouni Malinen
cef42a44e2 tests: EAP-TLS and config blob missing
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-20 17:25:41 +02:00
Jouni Malinen
02b4fb4057 tests: Speed up TNC test cases with the use of a single channel scan
There is no need for these test cases to run a full scan.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-20 17:25:41 +02:00
Jouni Malinen
7789070b95 tests: TNC PEAP-SoH local error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-20 17:25:41 +02:00
Jouni Malinen
212d6a1732 tests: TNC TTLS local error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-20 17:25:41 +02:00
Jouni Malinen
7c7234a583 tests: Fix scan result clearing in ssid_hidden*
These test cases were supposed to clear the cfg80211 and wpa_supplicant
scan caches in the end to avoid causing issues to the following test
cases. This did not work properly after introduction of the support for
aborting a pending scan. Fix this by using the flush_scan_cache()
function and waiting within the test case until the final scan operation
completes.

This issue was triggered by ssid_hidden/ssid_hidden2 followed by
ext_password_interworking (though, not every time).

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-20 17:25:41 +02:00
Jouni Malinen
bfdb90d40f tests: EAP-TTLS/MSCHAP with password hash
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-20 17:25:41 +02:00
Jouni Malinen
c44e499463 tests: EAP-TTLS local error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-20 17:25:41 +02:00
Jouni Malinen
a551da6aae tests: EAP-PEAP local error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-19 21:31:17 +02:00
Jouni Malinen
09a4404a33 tests: EAP-PEAP version forcing
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-19 20:59:14 +02:00
Jouni Malinen
81e1ab85bc tests: EAP-PEAP session resumption with crypto binding
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-19 20:23:51 +02:00
Jouni Malinen
09ad98c58a tests: EAP-PEAP with peap_outer_success=0
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-19 20:05:50 +02:00
Jouni Malinen
446dd7486c tests: REQ_HS20_ICON and DEL_HS20_ICON
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-19 18:34:01 +02:00
Ilan Peer
2e99239bd9 tests: Add rfkill tests for P2P Device operations
Add a couple of tests for rfkill with P2P Device operations
(with and without P2P Device interface).

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-12-18 22:26:18 +02:00
Jouni Malinen
9f052d805d tests: Prepare ap_open_out_of_memory for modified rfkill init path
The rfkill initialization will be moved out from
wpa_driver_nl80211_drv_init() which would break one step in this OOM
test case due to the memory allocation not existing anymore. Fix this by
skipping that OOM step to avoid causing false failures with the
following commits.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-18 22:26:18 +02:00
Jouni Malinen
27f6b03115 tests: wpa_supplicant SIGNAL_MONITOR command
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-18 21:02:37 +02:00
Jouni Malinen
6e9554e307 tests: Detect invitation GO issues more quickly
This speeds up and clarifies error reporting for cases where the GO
fails to start in invitation.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-18 16:14:55 +02:00
Johannes Berg
05736da8c6 tests: vm: Honor EPATH in uevent.sh
This is useful for testing CRDA since it means you can use EPATH to
redirect the test scripts to a different crda binary.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-12-18 00:24:51 +02:00
Jouni Malinen
c4e06b9b7b tests: EAP-TTLS with invalid phase2 parameter values
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-18 00:24:51 +02:00
Jouni Malinen
d386a9ace8 tests: TDLS with VHT 80, 80+80, and 160
This adds more coverage for TDLS testing for a case where the direct
link should use various VHT channel bandwidths.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-17 21:20:02 +02:00
Jouni Malinen
7e40a8812b tests: Verify SIGNAL_POLL values in ap_vht80
This confirms that the station recognized and negotiated 80 MHz
channel use with VHT.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-17 21:20:02 +02:00
Jouni Malinen
138903f91f tests: Run OCSP test cases with internal TLS library
There is no sufficient OCSP support to go through these test cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-17 21:19:59 +02:00
Jouni Malinen
58a406202a tests: OCSP certificate signed OCSP response using key ID
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-17 00:49:26 +02:00
Jouni Malinen
8e416cecdb tests: Make key-lifetime-in-memory more robust for GTK check
The decrypted copy of a GTK from EAPOL-Key is cleared from memory only
after having sent out CTRL-EVENT-CONNECTED. As such, there was a race
condition on the test case reading the wpa_supplicant process memory
after the connection. This was unlikely to occur due to the one second
sleep, but even with that, it would be at least theorically possible to
hit this race under heavy load (e.g., when using large number of VMs to
run parallel testing). Avoid this by running a PING command to make sure
wpa_supplicant has returned to eloop before reading the process memory.
This should make it less likely to report false positives on GTK being
found in memory.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-14 17:23:47 +02:00
Jouni Malinen
f089cdf98e tests: Add more memory details on key-lifetime-in-memory
This makes it easier to see where in memory the key was found and what
there is in memory around that location.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-14 15:49:01 +02:00
Jouni Malinen
16c43d2a8f tests: Run PKCS#12 tests with internal TLS crypto
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-14 15:49:01 +02:00
Jouni Malinen
ca27ee0998 tests: External server certificate chain validation
This tests tls_ext_cert_check=1 behavior with EAP-TLS, EAP-TTLS,
EAP-PEAP, and EAP-FAST.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-13 21:12:20 +02:00
Jouni Malinen
be90370bd5 tests: Fix wpas_ctrl_country and dbus_country with valid db.txt
init=CORE was previously used due to invalid db.txt data for 00. For
now, allow both it and the new init=USER after fixed db.txt.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-12 12:45:30 +02:00
Jouni Malinen
5b7784a89c tests: EAP-FAST local error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-12 12:42:44 +02:00
Jouni Malinen
1025603b3f tests: FT PTK rekeying triggered by AP/station after roam
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-10 00:14:36 +02:00
Jouni Malinen
cc02fd3eff tests: Make pmksa_cache_opportunistic_connect more robust
This test case could fail if the cfg80211 scan cache brought in a BSS
entry from an earlier test case and a new scan did not get executed
prior to the ROAM command. Fix this by forcing the scan to go through
prior to roaming to AP2

This issue showed up with the following test case sequence:
connect_cmd_roam pmksa_cache_opportunistic_connect

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-06 20:31:18 +02:00
Jouni Malinen
0ceff76e7b tests: WPA2 AP processing of RSN IE differences
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-06 20:00:10 +02:00
Jouni Malinen
8eb45bde38 tests: Write GTK locations into debug log in key_lifetime_in_memory
It looks like it is possible for the GTK to be found from memory every
now and then. This makes these test cases fail. Write the memory
addresses in which the GTK was found to the log to make it somewhat
easier to try to figure out where the key can be left in memory.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-06 17:48:43 +02:00
Jouni Malinen
1d32bc2c1c tests: Make dbus_wps_oom more robust
It was possible for the BSSs object property change signal to be
generated during the OOM test case for Get(). If that happened, the
signal was not sent out, but the following Get(BSSs) operation succeeded
unexpectedly which resulted in a test failure. Make this less likely to
happen by waiting 50 ms between the scan and Get(BSSs) operation. This
should be sufficient to cover most cases since wpa_supplicant uses 5 ms
timeout for D-Bus property changed updates.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-06 17:10:06 +02:00
Jouni Malinen
bc321e1597 tests: Make ap_max_num_sta_no_probe_resp more robust
It was possible for the AP's Beacon frame to be seen by dev[0] when
running a scan. This is not an error case. Make this test case more
robust by verifying with a sniffer whether a Probe Response frame was
sent to unexpected STA.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-06 13:38:18 +02:00
Jouni Malinen
ce96e65cb7 tests: D-Bus vendor element operations
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-06 12:50:41 +02:00
Jouni Malinen
b4e1e99577 tests: EAP-PSK local error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-06 11:13:12 +02:00
Jouni Malinen
4073ef22ae tests: EAP-IKEv2 local error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-06 00:39:27 +02:00
Jouni Malinen
d1341917ce tests: WPS and fragment ack OOM
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-05 21:35:45 +02:00
Jouni Malinen
96bf8fe104 tests: PKCS #8 private key with PKCS #5 v1.5 and v2.0 format
This verifies client private key use in encrypted PKCS #8 format with
PKCS #5 v1.5 format using pbeWithMD5AndDES-CBC and PKCS #5 v2.0 format
using PBES2 with des-ede3-cbc.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-05 20:27:27 +02:00
Jouni Malinen
b134397b11 tests: P2P persistent group formation, re-invocation, and cancel
Verify that P2P_CANCEL gets rejected on fully re-invoked persistent
group. This did not work properly before the last couple of commits and
before this week, the P2P_CANCEL on a separate group interface in P2p
Client role could result in use of freed memory and process termination.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-04 23:15:11 +02:00
Jouni Malinen
f98b0e5806 tests: Make tests using multi_check() more robust
It was possible for a cached scan entry in cfg80211 from an earlier test
case to show up while verifying that the disabled AP does not show up in
scan results. This could result in invalid test failures, e.g., when
running test cases "ap_require_ht ap_multi_bss_config" multiple times
(depends a bit on timing). Make this less likely to occur by explicitly
clearing the scan cache and by stopping wlan1 from trying to associate
before stopping ap_required_ht* test cases.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-04 21:03:43 +02:00
Jouni Malinen
d887ed3f95 tests: Fix ap_wps_er_multi_add_enrollee cleanup steps
Only one of the ERs was stopped at the end of the test case and this
could result in the following test case failing, e.g., when executing
this test case sequence: ap_wps_er_multi_add_enrollee ap_wps_upnp.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-02 18:19:39 +02:00