Commit graph

5027 commits

Author SHA1 Message Date
Michael Braun
459eee923c bridge: Use safe default bridge interface
Currently by default, all BSS share the bridge brvlan%d.
While this is sane when no tagged-interface is given, this
is insane when different tagged interfaces are given, as
it would result in bridging those tagged interfaces.

This patch therefore uses br%s%d with %s=tagged_interface
and %d=VLAN ID as bridge name when a tagged-interface is given.

Signed-hostap: Michael Braun <michael-dev@fami-braun.de>
2013-06-25 11:10:00 +03:00
Michael Braun
2aaeedfa07 bridge: Give bridge name in per-bss configuration
Currently, when different BSS using different tagged vlan
interfaces, they are forced to share the bridge brvlan#,
which is not desirable.

This patch fixes this by making the bridge name configurable.

Signed-hostap: Michael Braun <michael-dev@fami-braun.de>
2013-06-25 11:09:01 +03:00
Johannes Berg
de36e348f9 wlantest: Always write radiotap pcap-ng
When writing pcap-ng files, always include a radiotap
header even if there wasn't one in the input. For now
just drop prism headers, I don't have any to test.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-06-22 13:17:14 +03:00
Chengyi Zhao
8a901d750b D-Bus: Emit signal when a station is authorized or deauthorized
Add "StaAuthorized" and "StaDeauthorized" D-Bus interface in AP mode.
After enabling the AP mode of wpa_supplicant, the other process need to
get the MAC address and authorization status of every station, so
wpa_supplicant emits signal when the station is authorized or
deauthorized.

Signed-hostap: Chengyi Zhao <chengyix.zhao@gmail.com>
2013-06-22 12:09:09 +03:00
Andrei Otcheretianski
9578329874 Add AVG_RSSI report in signal_poll
Add AVG_RSSI report to the signal_poll command if it is reported by
the kernel.

Signed-hostap: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Signed-hostap: Ilan Peer <ilan.peer@intel.com>
2013-06-22 12:01:05 +03:00
Andrei Otcheretianski
2cc8d8f4e8 Add bandwidth and center freq info to signal_poll
Signed-hostap: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Signed-hostap: Ilan Peer <ilan.peer@intel.com>
2013-06-22 12:00:46 +03:00
Alexander Bondar
1e0e943e19 Remove 802.11b rates only in case of P2P group operation
11b rates removal have had impact on SoftAP functionality in
wpa_supplicant. This patch verifies that only in case of P2P group
operation 11b rates will be eliminated. Refer also to commit
4c2c302893.

Signed-hostap: Alexander Bondar <alexander.bondar@intel.com>
Signed-hostap: Ilan Peer <ilan.peer@intel.com>
2013-06-22 11:28:33 +03:00
David Spinadel
2090a0b42e nl80211: Add prints for kernel events
Add prints for kernel event, including the event ID and event string.

Signed-hostap: David Spinadel <david.spinadel@intel.com>
Signed-hostap: Ilan Peer <ilan.peer@intel.com>
2013-06-22 11:12:48 +03:00
Sunil Dutt
87436760a2 TDLS: Validate ext_supp_rates in copy_supp_rates
The ext_supp_rates passed to merge_byte_arrays would be invalid if not
advertized by the TDLS peer. Thus, validate the argument to avoid
crashes in such cases.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-06-20 15:10:15 +03:00
Jouni Malinen
85b4eac364 P2P: Do not reply to 802.11b-only Probe Request frames as GO
If AP mode SME/MLME within wpa_supplicant is used for processing Probe
Request frames in GO mode, drop Probe Request frames that include only
802.11b rates per P2P spec section 2.4.1.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-06-19 19:16:23 +03:00
Jouni Malinen
ec7b97ab00 Interworking: Add support for using eap_proxy offload
Fetch IMSI through eap_proxy for Interworking network selection if
needed.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-06-19 18:42:17 +03:00
Kyeyoon Park
4331263b73 Fix session timeout after ANQP dummy STA entry with SME-in-driver
Upon association, disable the timer that removes the dummy STA. This
timer caused the STA that associates within 5 seconds of doing an ANQP
query to disassociate, thinking it's a dummy STA. Similar call was
already there for the SME/MLME-in-hostapd case in handle_auth(), but the
SME-in-driver case was not previously addressed.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-06-18 17:40:51 +03:00
Jouni Malinen
56cb4e1788 wpadebug: Add option to ignore SSL errors
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-06-07 20:21:00 +03:00
Jouni Malinen
aa20e1a1fb Remove CONFIG_NO_WPA2 build parameter
There is not much use for enabling WPA without WPA2 nowadays since most
networks have been upgraded to WPA2. Furthermore, the code size savings
from disabling just WPA2 are pretty small, so there is not much
justification for maintaining this build option. Remove it to get rid of
undesired complexity.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-06-07 20:13:25 +03:00
Jouni Malinen
5d5c4ee5e0 Remove compiler warnings with CONFIG_NO_SCAN_PROCESSING
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-06-07 20:04:56 +03:00
Jouni Malinen
9aaa6955a8 Remove compiler warnings if TDLS is enabled without WPA2
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-06-07 20:04:12 +03:00
Jouni Malinen
84ae1d44ca Fix WNM build without WPA2
Commit ae8535b6e1 added a new function
wpa_sm_pmf_enabled() which is called from WNM code without ifdefs.
Define a dummy wrapper for this function to fix build if WPA2 is
disabled.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-06-07 20:02:50 +03:00
Jouni Malinen
c33d5eb063 Fix build without WPA2 or EAP
Commit 4033935dd9 updated
pmksa_cache_flush() function arguments, but forgot to update the wrapper
function for cases where WPA2 or EAP has been disabled in the build.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-06-07 20:01:10 +03:00
Bharat Bhushan
1aef400bf0 IBSS RSN: Implement disconnect() callback using sta_deauth()
This allows driver wrappers to implement disconnection of IBSS peers in
cases operations, e.g., GTK update, fail.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-06-07 13:07:17 +03:00
Wei-Jen Lin
4abc0424ef P2P: Automatic channel selection at re-invocation of persistent GO
If the driver wrapper supports best operation channel indication, the
p2p_group_add command can now use special values (freq=2 and freq=5) to
indicate that the re-invoked persistent GO is to be started on the
specified band.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-06-05 02:06:29 +03:00
Vivek Natarajan
8f395284bd P2P: Modify wait time in INVITE state based on Tx status of INV-REQ
In a noisy enviromment, some peers can be slow to respond to the
invitation request frames which may lead to unnecessary state timeout.
Increase this timeout to 350 ms to improve the probabilty of
successfully receiving the invitation response frames.

Signed-hostap: Vivek Natarajan <nataraja@qca.qualcomm.com>
2013-06-03 21:30:34 +03:00
Jouni Malinen
e112764e6d nl80211: Use NL80211_ATTR_PEER_AID to set TDLS peer AID
This is needed for TDLS with VHT to allow partial AID to be set
correctly for the direct link frames. cfg80211 validation rules
prevented NL80211_ATTR_STA_AID from being used for this in set_station
case, so the new attribute is used instead.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-30 10:25:23 +03:00
Jouni Malinen
f8a5fd4243 Synchronize with wireless-testing.git include/uapi/linux/nl80211.h
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-30 10:22:47 +03:00
Jouni Malinen
962b8b36e6 Android: Add PMF support to hostapd build
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-29 18:06:29 +03:00
Jouni Malinen
9b1693a162 WPS: Allow Device Password Id changes between PIN methods
Commit b4a17a6ea7 added support for the
WPS Registrar to change the Device Password based on WSC specification
design. However, this added validation for Registrar behavior which
resulted in preventing a common P2P use case from working. Relax the
validation rules for builds with P2P enabled to allow the Enrollee (P2P
client) accepting M1/M2 changes in Device Password Id between Default
and Registrar-specified PIN.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-28 00:35:47 +03:00
Jouni Malinen
1ba51ec02b nl80211: Add debug print for set_supp_port operation
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-27 20:32:54 +03:00
Jouni Malinen
add9b7a46a nl80211: Ignore deauth/disassoc event from old AP
It looks like cfg80211 can deliver a deauth/disassoc event during some
roaming cases while we are already in progress with a new
authentication/association. This happens at least with FT protocol.
Avoid issues with such disconnection event resulting in core
wpa_supplicant stopping the new connection attempt by tracking
auth/assoc BSSID more carefully within driver_nl80211.c and filtering
out events that do not apply for the current AP.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-27 20:10:57 +03:00
Jouni Malinen
3b5a1a7769 wlantest: Recognize hwsim_test packets
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-26 22:19:52 +03:00
Jouni Malinen
ace4e460e5 wlantest: Select correct TDLS context if multiple exists
Some corner cases may result in both directions of TDLS tracking context
existing. If that is the case, the incorrect one may end up getting
picked when figuring out which TK to use for decryption or fix
statistics counter to increment. Fix this by preferring the context that
has TDLS link up.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-26 22:14:00 +03:00
Jouni Malinen
4ac800db82 wlantest: Track TDLS setup nonces
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-26 22:14:00 +03:00
Jouni Malinen
e4d99217f7 wlantest: Use add_note() to annotate frames
This adds debug information from wlantest into pcapng frame comments to
make the information more convenient to use, e.g., in Wireshark.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-26 22:14:00 +03:00
Jouni Malinen
ba2beacc97 wlantest: Add support for writing pcapng files
The new -n<file> command line argument can be used to request wlantest
to write all read or captured frames into a pcapng file. This is similar
to the -w argument, but with pcapng allowing per-frame comments to be
embedded in the file.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-26 20:58:42 +03:00
Jouni Malinen
eb4737f6df Fix ESS_DISASSOC ctrl_iface command parser
strchr can return NULL and that needs to be checked instead of what the
pointer could be pointing to.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-25 19:55:32 +03:00
Jouni Malinen
cd7f1b9a1d tests: Add test cases for Fast BSS Transition
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-24 16:05:40 +03:00
Jouni Malinen
b54c9ff9ce FT: Fix TKIP group key configuration in FT protocol
The Michael MIC TX and RX keys needs to be swapped in the FT case just
like in all other TKIP key configuration cases. This fixes issues where
TKIP as group cipher resulted in Michael MIC failures being detected for
each received group-addressed frame after FT protocol use.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-24 16:03:54 +03:00
Jouni Malinen
e78aaca0da Stop TKIP countermeasures on FLUSH command
This is needed to get wpa_supplicant into clean state during testing if
a test case triggers countermeasures.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-24 16:02:58 +03:00
Jouni Malinen
3cb953e4b6 Do not set driver MAC ACL unless driver supports this
This cleans up debug log by not including comments about failed
operations in case the operation is known to fail due to not being
supported by the driver.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-24 13:37:22 +03:00
Vivek Natarajan
3c4ca36330 hostapd: Support MAC address based access control list
Enable MAC address based ACL for the drivers which advertise
this capabilty with NL80211_ATTR_MAC_ACL_MAX. Either of blacklist
or whitelist is supported, though, not simultaneously.

Signed-hostap: Vivek Natarajan <nataraja@qca.qualcomm.com>
2013-05-24 13:26:35 +03:00
Jouni Malinen
376204934d wpa_cli: Support tab completion with ifname= prefix
Enable tab completion for the cases where ifname= prefix is used in
interactive mode by skipping over that prefix before running through the
per-command completion routines. The ifname= prefix itself is also
covered by adding the possible interface names to the command list.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-23 20:35:02 +03:00
Jouni Malinen
13b11ba702 wpa_cli: Allow IFNAME= prefix to be used
Strip out the IFNAME=<ifname> prefix from commands before parsing them
through the normal processing and then add the prefix back to the
beginning of the actual control interface command to make per-interface
commands work through the global control interface without having to use
the 'raw' command.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-23 20:04:17 +03:00
Jouni Malinen
ae8535b6e1 WNM: Make ESS Disassoc Imminent event more convenient to use
Define a proper event prefix and include additional information to allow
ESS Dissassociation Imminent event to be used in a wpa_cli action
script.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-23 16:51:03 +03:00
Jouni Malinen
6df634faf9 WNM: Do not reject ESS Disassoc Imminent
This indication is not expected to include candidates, so do not reject
it based on that.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-23 16:50:55 +03:00
Jouni Malinen
7b53acd395 WNM: Use defines for BSS Trans Mgmt field values
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-23 16:50:39 +03:00
Jouni Malinen
8e1bc70231 WNM: Fix ess_disassoc timeout to be specified in TBTTs
This was previously claimed to be in ms, but the field in BSS Transition
Management Request frame is in number of TBTTs (beacon interval). Use
that unit in the ESS_DISASSOC control interface command to be able to
specify any value and just modify the timeout value to be calculated
based on beacon interval.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-23 16:50:32 +03:00
Jouni Malinen
901d1fe1e5 WNM: Remove PMKSA cache entry on ESS disassoc imminent notification
This is needed to avoid allowing the STA to reconnect using a cached
PMKSA. ESS disassoc imminent notification is normally used to indicate
that the STA session will be terminated and as such, requiring full
authentication through the authentication server after this is needed.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-23 16:50:06 +03:00
Jouni Malinen
dad153d16b Try to use fast-associate on ENABLE_NETWORK
This makes ENABLE_NETWORK behave similarily to SELECT_NETWORK by
allowing a scan to be skipped if recent scan results are available.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-22 16:10:59 +03:00
Jouni Malinen
b06800170a Fix already-associated detection with driver-based BSS selection
wpa_s->pending_bssid is all zeros during connection attempt when
driver-based BSS selection is used. Take this into account when
determining whether new scan results should trigger a connection based
on wpa_s->current_ssid, i.e., a connection attempt with the selected
network instead of selected BSS.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-22 16:10:59 +03:00
Sean Lin
72728c6fa8 P2P: Relax channel forcing for invitation processing with MCC support
When STA interface is connected and P2P interface gets invited in a
different channel from previous P2P group, the invitiation would fail
because of no common channel found. Fix this by using different logic
when device support multi channel concurrency.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-22 13:29:46 +03:00
Jouni Malinen
4033935dd9 Fix OKC-based PMKSA cache entry clearing
Commit c3fea27274 added a call to clear
all other PMKSA cache entries for the same network if the PMKSA cache
entry of the current AP changed. This was needed to fix OKC cases since
the other APs would likely use the new PMK in the future. However, this
ended up clearing entries in cases where that is not desired and this
resulted in needing additional full EAP authentication with networks
that did not support OKC if wpa_supplicant was configured to try to use
it.

Make PMKSA cache entry flushing more limited so that the other entries
are removed only if they used the old PMK that was replaced for the
current AP and only if that PMK had previously been used successfully
(i.e., opportunistic flag was already cleared back to 0 in
wpa_supplicant_key_neg_complete()). This is still enough to fix the
issue described in that older commit while not causing problems for
standard PMKSA caching operations even if OKC is enabled in
wpa_supplicant configuration.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-22 13:24:30 +03:00
Jouni Malinen
1045ec36a3 nl80211: Add couple of additional iftypes to debug prints
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-21 16:51:06 +03:00