Commit graph

24 commits

Author SHA1 Message Date
Jouni Malinen
2c6f8cf6c8 Replace perror() with wpa_printf(strerror) in ctrl_iface calls
This replaces number of perror() calls with wpa_printf() to get the
error messages embedded within rest of the debug messages in the same
stream instead of pushing these to stderr which may get directed to
another location.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-08-26 11:46:21 +03:00
Ilan Peer
e0591c3cfe wpa_supplicant: Reduce wait time for control interfaces
Reduce the wait time for the monitor control interfaces to get
messages on wpa_supplicant de-init etc., as this significantly delays
the shutdown of the wpa_supplicant.

Signed-hostap: Ilan Peer <ilan.peer@intel.com>
2013-08-25 09:48:27 +03:00
Jouni Malinen
a235aca316 Fix DETACH command debug prints to avoid use of freed memory
In case a control interface socket is detached because of sendmsg()
failing for the socket, function call to detach the socket uses a
pointer to the socket information in the structure to be freed. Reorder
code to print socket info before freeing the data to avoid use of freed
memory in case debug prints are enabled.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-08-24 23:31:06 +03:00
Jouni Malinen
8d6e035072 Make global UNIX socket non-blocking for ctrl_iface
This keeps wpa_supplicant from hanging forever if the other end of the
socket dies. This is similar to the earlier commit
4fdc8def88 to make the global control
interface befave in the same way.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-08-24 20:31:04 +03:00
Jouni Malinen
b62b29ea87 Do not block on ctrl_iface monitor events
It looks like some of the global control interface cases ended up
blocking in sendmsg() when trying to send an event. Since this can block
all wpa_supplicant processing for multiple seconds, this is very
undesirable. Avoid this by requesting sendmsg() to return an error
rather than waiting for the message to be sent.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-07-11 17:04:29 +03:00
Jouni Malinen
c4bf83a723 P2P: No duplicate AP-STA-CONNECTED/DISCONNECTED as global event
These events are sent as a special case to both the group interface and
"parent interface" (i.e., the interface that was used for managing P2P
negotiation). The latter is not really correct event, so get rid of it
with the new global control interface design where there is no need to
support legacy upper layer implementations.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-18 19:18:31 +03:00
Jouni Malinen
47bfe49c31 Add wpa_msg_global() for global events
This function can be used instead of wpa_msg() and wpa_msg_ctrl() to
indicate that an event is not specific to a network interface.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-18 14:19:24 +03:00
Jouni Malinen
214e428b42 Allow global ctrl_iface monitors
The ATTACH/DETACH mechanism to request event messages from
wpa_supplicant can now be used through the global control interface,
too. This results in events from all interfaces being delivered through
a single monitor socket. "IFNAME=<ifname> " prefix is used on events
that are specific to an interface.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-18 14:07:28 +03:00
Jouni Malinen
d2a9e2c76d Abstract and Android sockets for global ctrl_iface
The wpa_supplicant global control interface parameter can now be used to
explicitly specify an abstract UNIX domain socket (Linux specific
extension) with "@abstract:" prefix and an Android control socket with
"@android:" prefix.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-18 11:42:09 +03:00
Jouni Malinen
2925756575 wpa_supplicant: Add -G argument to specify global ctrl group
The optional -G<group> command line argument can be used to specify the
group that can access the global control interface.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-18 11:00:05 +03:00
Jouni Malinen
d49ea68284 Android: Force group access to ctrl_iface directory
wpa_supplicant is started from /init.*.rc on Android and that seems
to be using umask 0077 which would leave the control interface
directory without group access. This breaks things since Wi-Fi
framework assumes that this directory can be accessed by other
applications in the wifi group. Fix this by adding group access even
if umask value would prevent this.

In most cases, this issue was not hit since the control interface
directory is normally created by that same init.*.rc file with suitable
mode and wpa_supplicant is killed in the way that does not allow it to
remove the file. However, if wpa_supplicant is allowed stop cleanly, it
will remove the directory and the next start could result with the Wi-Fi
framework not being able to use Wi-Fi (and GUI not showing Wi-Fi getting
enabled).

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-11-23 17:06:36 +02:00
Ben Greear
4fdc8def88 Make UNIX socket non-blocking for ctrl_iface
This keeps wpa_cli from hanging forever if the other end of the socket
dies.

Signed-hostap: Ben Greear <greearb@candelatech.com>
2012-08-04 20:34:27 +03:00
Ben Greear
9d05374796 Make bind failure messages unique
This helps someone know which part of the code is complaining.

Signed-hostap: Ben Greear <greearb@candelatech.com>
2012-04-06 12:10:36 +03:00
Jouni Malinen
0f3d578efc Remove the GPL notification from files contributed by Jouni Malinen
Remove the GPL notification text from the files that were
initially contributed by myself.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-02-11 19:39:36 +02:00
Dmitry Shmidt
b3f3865e0e Use Android reserved namespace for control interface
On Android, use a special reserved namespace for the UNIX domain
socket.
2011-02-27 18:19:17 +02:00
Jouni Malinen
b563b3882e P2P: Add control interface commands for P2P 2010-09-09 07:17:18 -07:00
Jouni Malinen
6700a277a9 Avoid dropping ctrl_iface on ENOBUFS error burst
These bursts can result in control interface monitors being detached
even if the external program is still working properly. Use much larger
error threshold for ENOBUFS to avoid this.
2010-04-11 19:29:24 +03:00
Kel Modderman
09bd6e8cca wpa_supplicant: fix FTBFS on Debian GNU/kFreeBSD
This patch allows wpa_supplicant to compile on Debian's kfreebsd
architectures.

Patch by Stefan Lippers-Hollmann based on work done by Petr Salinger
and Emmanuel Bouthenot for 0.6.X (http://bugs.debian.org/480572).
2010-03-06 10:16:47 +02:00
Jouni Malinen
09e47a0768 Convert to use struct dl_list 2009-12-23 23:56:35 +02:00
Anders Aspegren Søndergaard
3fd2a226f9 wpa_supplicant: Fix ctrl_interface group permissions to allow read/execute
When using umask 0077, the control interface directory was left without
group read/execute permissions even if the configuration file explicitly
asked for the group to be allowed to access the control interface. Fix
this by adding read/execute permissions for group if a specific group is
defined in the configuration. [Bug 199]
2009-11-16 16:43:25 +02:00
Sam Leffler
19b9436c0e Fix UNIX domain socket address handling to be more portable
Removing just sun_family is not portable since some systems (e.g.,
FreeBSD) include an additional sun_len field. Using offsetof should be
portable. In addition, set sun_ken for FreeBSD.
2009-03-21 22:00:27 +02:00
Jouni Malinen
c5aaa01562 Detach ctrl_iface monitor if the client socket is removed
No need to wait for 10 errors when using UNIX domain socket; we can
detach the client immediately on ENOENT.
2009-03-17 16:56:30 +02:00
Jouni Malinen
8e888179e1 Make the "invalid group" error show up with default verbosity level 2008-03-06 22:49:46 +02:00
Jouni Malinen
6fc6879bd5 Re-initialize hostapd/wpa_supplicant git repository based on 0.6.3 release 2008-02-27 17:34:43 -08:00