jeltz/hostap
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
2139 commits 3 branches 0 tags 53 MiB
Commit graph

886 commits

Author SHA1 Message Date
Jouni Malinen 43a3863516 Trigger scan on reload-config only if there are enabled networks 2010-09-09 07:17:20 -07:00
Jouni Malinen d9d6a58c8f P2P: Fix invitation to active group to use correct operating channel 
Invitation Request must use the current operating frequency of the
group, not the default operating channel.
 2010-09-09 07:17:20 -07:00
Jouni Malinen dcf788d1a4 WPS: Fix configuration strings on config reload 
Previously, freed memory could be used as device name (and other similar
parameters) when building WPS IE after SIGHUP.
 2010-09-09 07:17:20 -07:00
Jouni Malinen af8ab1ae97 P2P: Use 'Enrollee info' WPS request type in P2P scans 
This avoids setting explicit Request-to-Enrollee request when
WPS 2.0 is used.
 2010-09-09 07:17:20 -07:00
Jouni Malinen 131cb37c2d P2P: Allow pre-authorization of invitation to apply to src addr 
For client-invites-device case, the pre-authorization of an invitation
to running group will need to allow Invitation Request from specified
address, too. This is for testing uses only.
 2010-09-09 07:17:19 -07:00
Jouni Malinen 6d4747a9a2 Add P2P Interface Address into ctrl_iface status output 2010-09-09 07:17:19 -07:00
Jouni Malinen 80c9582a5f P2P: Add test command for filtering which peers are discovered 
"wpa_cli p2p_set peer_filter <MAC address>" can now be used to
only allow a single P2P Device (based on P2P Device Address) to be
discovered for testing. Setting the address to 00:00:00:00:00:00
disables the filter.
 2010-09-09 07:17:19 -07:00
Jouni Malinen 6e6963ea86 P2P: Add test mode for SD to force fragmented response 2010-09-09 07:17:19 -07:00
Jouni Malinen 18708aadfc P2P: Initial support for SD fragmentation (GAS Comeback Request/Response) 2010-09-09 07:17:19 -07:00
Jouni Malinen 2a43101e48 P2P: Fix memory leak in SD service entries 
Need to flush stored service entries when wpa_supplicant is being
terminated.
 2010-09-09 07:17:19 -07:00
Jouni Malinen bf608cad56 P2P: Rename SD info not available define to match with spec change 2010-09-09 07:17:19 -07:00
Jouni Malinen 706887fc28 P2P: Stop early when processing not-persistent invitation result 2010-09-09 07:17:19 -07:00
Jouni Malinen 2e062d5d74 P2P: Fix Group ID in Invitation Request from active GO 
Need to get P2P Device Address, not the Interface Address.
 2010-09-09 07:17:19 -07:00
Jouni Malinen 108def931e P2P: Add command for pre-authorizing an invitation to an active group 
This is mainly designed for testing and allows p2p_connect join auth
to be used to accept a specific invitation to an active group that
may be received in the future.
 2010-09-09 07:17:19 -07:00
Jouni Malinen 3c5126a41f P2P: Set Device Password ID in WPS M1/M2 per new rules 
If the P2P client (WPS Enrollee) uses a PIN from the GO (Registrar),
Device Password ID in M1 & M2 is set to Registrar-specified.
 2010-09-09 07:17:19 -07:00
Jouni Malinen ef922c4a34 P2P: Run a scan before provision discovery in p2p_connect join 
This is needed to make sure we have fresh BSS information for the GO.
 2010-09-09 07:17:19 -07:00
Jouni Malinen c381508d88 P2P: Implement power save configuration 
wpa_cli p2p_set ps <0/1/2>
wpa_cli p2p_set oppps <0/1>
wpa_cli p2p_set ctwindow <0..> msec
 2010-09-09 07:17:19 -07:00
Jouni Malinen 07a30a66c3 P2P: Do not schedule new remain-on-channel if waiting for drv event 
The driver event for remain-on-channel may be delayed in a way that
allows management-frame-received event to be received before
wpa_supplicant knows that the driver is actually already on the
previously requested channel. We should not request a new
remain-on-channel to send a response to just a frame if we are waiting
for the driver to get to the same channel. Instead, just continue
waiting for the driver event.
 2010-09-09 07:17:18 -07:00
Jouni Malinen d6ae995057 P2P: Fix infinite loop on interface selection for Action frame TX 
When the first wpa_supplicant interface is not the correct one for
transmitting an Action frame (e.g., P2P Presence Request frame
uses a group interface), the code got stuck in an infinite busy
loop. Fix the iteration to go through the interfaces properly.
 2010-09-09 07:17:18 -07:00
Jouni Malinen df91238b54 P2P: wpa_qui-qt4: Add P2P functionality into the GUI 2010-09-09 07:17:18 -07:00
Jouni Malinen 42f0101b4d P2P: wpa_cli action calls for P2P group started/removed events 2010-09-09 07:17:18 -07:00
Jouni Malinen 57faa1cee8 wpa_cli: Add P2P commands 2010-09-09 07:17:18 -07:00
Jouni Malinen 9fdd0fada7 P2P: Add disassociation/deauthentication IE notifications 2010-09-09 07:17:18 -07:00
Jouni Malinen 9bae1be0a1 P2P: Map driver events to P2P event notifications 2010-09-09 07:17:18 -07:00
Jouni Malinen 0c6b310e83 P2P: Show P2P info in ctrl_iface scan results 2010-09-09 07:17:18 -07:00
Jouni Malinen d23bd8940f P2P: Show P2P Device Address in wpa_cli status 2010-09-09 07:17:18 -07:00
Jouni Malinen b563b3882e P2P: Add control interface commands for P2P 2010-09-09 07:17:18 -07:00
Jouni Malinen 0817de904e P2P: Optimize scan timeouts for group formation 2010-09-09 07:17:17 -07:00
Jouni Malinen 5f3a6aa0a4 P2P: Add P2P IE into (Re)Association Request frames 2010-09-09 07:17:17 -07:00
Jouni Malinen 0e65037c27 P2P: Add P2P IE into Probe Request frames 2010-09-09 07:17:17 -07:00
Jouni Malinen 6e3f4b89ea P2P: Let the driver wrapper know if association is for P2P group 2010-09-09 07:17:17 -07:00
Jouni Malinen e44f8bf20a P2P: Add P2P configuration and callbacks in hostapd code 2010-09-09 07:17:17 -07:00
Jouni Malinen b22128efdc P2P: Add initial version of P2P Module 2010-09-09 07:17:17 -07:00
Jouni Malinen fdadd5fe03 P2P: Do not register l2_packet on dedicated P2P device interface 2010-09-09 07:17:17 -07:00
Jouni Malinen 73e492693d P2P: Add TODO note for Group Formation bit use in AP selection 2010-09-09 07:17:17 -07:00
Jouni Malinen 4c2c302893 P2P: Remove 802.11b rates from wpa_supplicant AP mode operations 
TODO: do this only for P2P group interface
 2010-09-09 07:17:17 -07:00
Jouni Malinen 4dac02455a P2P: Use config block with disabled==2 to store persistent groups 2010-09-09 07:17:17 -07:00
Jouni Malinen 75bde05d53 P2P: Add driver operations for P2P use 2010-09-09 07:17:16 -07:00
Jouni Malinen 2ff99b3c38 P2P: Do not save temporary networks 2010-09-09 07:17:16 -07:00
Jouni Malinen b2c5a4a3df P2P: Do not filter BSSes based on SSID during P2P Provisioning 
TODO: Use group id from GO Neg instead(?)
 2010-09-09 07:17:16 -07:00
Jouni Malinen 9fa243b295 P2P: Let WPS code know if it is used in a P2P group 2010-09-09 07:17:16 -07:00
Jouni Malinen e3768e7c94 P2P: Add global configuration parameters for P2P 2010-09-09 07:17:16 -07:00
Jouni Malinen 2c5d725c65 P2P: Add dynamic network config block parameters for P2P 2010-09-09 07:17:16 -07:00
Jouni Malinen 611aea7d41 Allow ctrl_iface SET command to change global config parameters 2010-09-09 07:17:16 -07:00
Jouni Malinen 1d47214aa9 Add flag indicating which global configuration parameters have changed 2010-09-09 07:17:16 -07:00
Jouni Malinen 121adf9c2e Move global configuration parser into config.c 
This makes it easier to provide support for dynamic updates of the
global configuration parameters while wpa_supplicant is running.
 2010-09-09 07:17:16 -07:00
Jouni Malinen 42f50264c0 WPS: Make fragment size configurable for EAP-WSC peer 
"wpa_cli set wps_fragment_size <val>" can now be used to configure the
fragment size limit for EAP-WSC.
 2010-09-09 06:07:49 -07:00
Jouni Malinen cae67937ca WPS: Fix CONFIG_WPS_STRICT build option 
This was not supposed to be depending on CONFIG_WPS_NFC.
 2010-09-09 06:07:49 -07:00
Jouni Malinen ad4741183f WPS 2.0: Make sure PHY/VIRT flag gets set for PBC 2010-09-09 06:07:48 -07:00
Jouni Malinen 53587ec183 WPS 2.0: Make WSC 2.0 support to be build option (CONFIG_WPS2) 
For now, the default build will only include WSC 1.0 support.
CONFIG_WPS2=y can be used to add support for WSC 2.0.
 2010-09-09 06:07:48 -07:00