Commit graph

56 commits

Author SHA1 Message Date
Jouni Malinen
21f01a8e3d Fix build with CONFIG_NO_CONFIG_BLOBS
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-16 12:20:21 +02:00
Sunil Dutt
f8361e3d68 TDLS: Pass peer's VHT Capability information during sta_add
The information of the peer's VHT capability is required for the
driver to establish a TDLS link in VHT mode with a compatible peer.
Pass this information to the driver when the peer station is
getting added.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-25 10:31:50 +02:00
Sunil Dutt
d16531c40c TDLS: Pass peer's Capability and Ext Capability info during sta_add
The contents of the peer's capability and extended capability
information is required for the driver to perform TDLS P-UAPSD and Off
Channel operations. Pass this information to the driver when the peer
station is getting added.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-14 21:02:34 +02:00
Sunil Dutt
ff4178d57c TDLS: Pass peer's HT Capability and QOS information during sta_add
The information of the peer's HT capability and the QOS information is
required for the driver to perform TDLS operations. Pass this
information to the driver when the peer station is getting added.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-14 21:01:50 +02:00
Jouni Malinen
b8df43dec6 TDLS: Fix add/set STA operation
Commit a9a1d0f08a added vht_capabilities
to struct hostapd_sta_add_params but forgot to update
wpa_supplicant_tdls_peer_addset() to initialize the variable to NULL.
This could result in uninitialized pointer being used in
driver_nl80211.c when adding a TDLS peer entry. Fix this by clearing the
hostapd_sta_add_params with memset.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-14 21:01:07 +02:00
Paul Stewart
93c7e332c2 wpa_supplicant: Add more DBus EAP status
Signal the start of EAP authentication as well as when additional
credentials are required to complete.

Signed-hostap: Paul Stewart <pstew@chromium.org>
2013-01-12 19:51:18 +02:00
Jouni Malinen
77d7b090e0 Remove compiler warning on CONFIG_NO_WPA build
wpa_supplicant_set_rekey_offload() is used only if CONFIG_NO_WPA is not
defined.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-12-18 15:14:54 +02:00
Jouni Malinen
6e2020210a Allow OKC to be enabled by default
Previously, OKC (opportunistic key caching, a.k.a. proactive key
caching) could be enabled only with a per-network parameter
(proactive_key_caching). The new global parameter (okc) can now be used
to change the default behavior to be OKC enabled (okc=1) for network
blocks that do not override this with the proactive_key_caching
parameter.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-11-12 20:07:53 +02:00
Jouni Malinen
1e8a6e7553 Remove unused wpa_supplicant_disassociate()
This function is now unused after the last couple of commits that
removed the last uses, so remove this to keep code simpler since all
places that disassociate, can use deauthentication instead.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-11-05 17:05:37 +02:00
Jouni Malinen
e026159a8e EAP-SIM/AKA: Store pseudonym identity in configuration
Use the anonymous_identity field to store EAP-SIM/AKA pseudonym identity
so that this can be maintained between EAP sessions (e.g., after
wpa_supplicant restart) even if fast re-authentication data was cleared.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-09-02 13:04:18 +03:00
Paul Stewart
dd7fec1f29 wpa_supplicant: Report EAP connection progress to DBus
Send an "EAP" signal via the new DBus interface under various
conditions during EAP authentication:

  - During method selection (ACK and NAK)
  - During certificate verification
  - While sending and receiving TLS alert messages
  - EAP success and failure messages

This provides DBus callers a number of new tools:

  - The ability to probe an AP for available EAP methods
    (given an identity).
  - The ability to identify why the remote certificate was
    not verified.
  - The ability to identify why the remote peer refused
    a TLS connection.

Signed-hostap: Paul Stewart <pstew@chromium.org>
2012-06-04 21:10:01 +03:00
Jouni Malinen
0f3d578efc Remove the GPL notification from files contributed by Jouni Malinen
Remove the GPL notification text from the files that were
initially contributed by myself.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-02-11 19:39:36 +02:00
Dan Williams
81c57e221d Add wpa_supplicant_ctrl_req_from_string()
Converts from a string to a control request enum when input
from a control interface is received. Will be used by a
subsequent patch.

Signed-off-by: Dan Williams <dcbw@redhat.com>
2011-10-30 12:04:24 +02:00
Dan Williams
a9022616ae dbus: Implement EAP SM control request signals
Add a D-Bus signal for EAP SM requests. This signal is emitted on the
Interface object so that clients only have to listen to one object for
requests rather than to all network objects. This signal is analogous
to the socket control interface's CTRL-REQ- request.

Signed-off-by: Dan Williams <dcbw@redhat.com>
2011-10-30 12:04:24 +02:00
Dan Williams
9ef1aaae24 Use an enum for EAP SM requests
Control requests will be extended for non-EAP uses later, so it makes
sense to have them be generic. Furthermore, having them defined as an
enum is easier for processing internally, and more generic for control
interfaces that may not use field names. The public ctrl_req_type /
field_name conversion function will be used later by the D-Bus control
interface too.

Signed-off-by: Dan Williams <dcbw@redhat.com>
2011-10-30 12:04:24 +02:00
Arik Nemtsov
45b722f150 TDLS: Add peer as a STA during link setup
Before commencing setup, add a new STA entry to the driver representing
the peer. Later during setup, update the STA entry using information
received from the peer.

Extend sta_add() callback for adding/modifying a TDLS peer entry and
connect it to the TDLS state machine. Implement this callback for the
nl80211 driver and send peer information to kernel.

Mark TDLS peer entries with a new flag and translate it to a
corresponding nl80211 flag in the nl80211 driver.

In addition, correct TDLS related documentation in the wpa_driver_ops
structure.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Cc: Kalyan C Gaddam <chakkal@iit.edu>
2011-10-23 22:19:35 +03:00
Arik Nemtsov
c58ab8f249 TDLS: Get TDLS related capabilities from driver
Put glue code in place to propagate TDLS related driver capabilities to
the TDLS state machine.

If the driver doesn't support capabilities, assume TDLS is supported
internally.

When TDLS is explicitly not supported, disable all user facing TDLS
operations.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Cc: Kalyan C Gaddam <chakkal@iit.edu>
2011-10-23 22:15:15 +03:00
Jouni Malinen
17fbb751e1 Remove user space client MLME
This code was used only with driver_test.c to allow MLME operations
in hostapd to be tested without having to use a real radio. There
are no plans on extending this to any other use than testing and
mac80211_hwsim has now obsoled the need for this type of testing.
As such, we can drop this code from wpa_supplicant to clean up the
implementation of unnecessary complexity.
2011-10-22 22:45:38 +03:00
Jouni Malinen
7c444f3c12 Fix proactive_key_caching configuration to WPA code
The proactive_key_caching parameter was missed in mapping the
config_ssid data into the WPA state machine configuration. This
prevented addition of PMKSA cache entries based on PMKSA caching
candidate events.
2011-09-16 18:44:06 +03:00
Johannes Berg
b14a210ce2 nl80211: Support GTK rekey offload
Add support to wpa_supplicant for device-based GTK rekeying. In order to
support that, pass the KEK, KCK, and replay counter to the driver, and
handle rekey events that update the latter.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-07-12 21:22:51 +03:00
Michael Chang
ade74830b4 Add dbus signal for information about server certification
In general, this patch attemps to extend commit
00468b4650 with dbus support.

This can be used by dbus client to implement subject match text
entry with preset value probed from server. This preset value, if
user accepts it, is remembered and passed to subject_match config
for any future authentication.

Signed-off-by: Michael Chang <mchang@novell.com>
2011-07-05 12:22:32 +03:00
Ganesh Prasadh
281ff0aa76 TDLS: Add initial support for TDLS (IEEE Std 802.11z-2010) 2011-03-06 14:53:49 +02:00
Jouni Malinen
09c395b4bb FT: Configure FT XXKey as PMK for driver-based 4-way handshake
When using FT-EAP, the second half of MSK is used as the starting
point for PMK key hierarchy. Configure that instead of the first
half of MSK when using FT with driver-based 4-way handshake and
FT protocol.
2011-02-01 00:06:13 +02:00
Jouni Malinen
0382097ef3 Use set_key addr to distinguish default and multicast keys
Previously, both NULL and ff:ff:ff:ff:ff:ff addr were used in various
places to indicate default/broadcast keys. Make this more consistent
and useful by defining NULL to mean default key (i.e., used both for
unicast and broadcast) and ff:ff:ff:ff:ff:ff to indicate broadcast
key (i.e., used only with broadcast).
2011-01-09 19:44:28 +02:00
Jouni Malinen
da64c266e7 Use more consistent set_key seq value when nothing is being set
Use NULL instead of (u8 *) "" as the seq value and make sure the
driver wrapper implementations can handle NULL value. This was
previously already done in number of places, but not everywhere.
2011-01-09 12:09:04 +02:00
Jouni Malinen
69a6b47aa0 Fix wpa_supplicant AP mode to ignore EAPOL Supplicant port callback
This is needed to avoid setting EAPOL PAE port status incorrectly
when using wpa_supplicant to control AP mode operations.
2010-07-17 20:25:41 -07:00
Jouni Malinen
2a7e7f4e4a FT: Add driver op for marking a STA authenticated
This can be used with FT-over-DS where FT Action frame exchange
triggers transition to State 2 (authenticated) without Authentication
frame exchange.
2010-03-13 18:28:15 +02:00
Jouni Malinen
9ba9fa07cc Move wpa_supplicant specific scan code away from src/drivers
This fits better in wpa_supplicant/scan.c. Couple of remaining
scan_helpers.c functions are currently used in driver wrappers,
but they can likely be removed in the future.
2010-01-03 18:48:11 +02:00
Jouni Malinen
a1fd2ce54e Do not store raw scan results
Use scan results to update the BSS table and to select the BSS for
connection, but do not store the results for longer time.
2010-01-02 16:41:38 +02:00
Jouni Malinen
e48f0fb6a7 Use BSS table for WPA get-Beacon-IEs operation 2010-01-02 15:26:50 +02:00
Jouni Malinen
8d923a4acf Only expire scanned BSSes based on new scan results
Get more information about scans when updating BSS table information.
This allows the missing-from-scans expiration rule to work properly
when only partial set of channels or SSIDs are being scanned.
2010-01-02 13:57:44 +02:00
Jouni Malinen
719347511a Get rid of unnecessary typedefs for enums. 2009-12-26 10:35:08 +02:00
Jouni Malinen
2d106f21aa Remove unnecessary defines
The following defines are not really needed in most places, so
remove them to clean up source code and build scripts:
EAP_TLS_FUNCS
EAP_TLS_OPENSSL
EAP_TLS_GNUTLS
CONFIG_TLS_INTERNAL
2009-12-05 22:51:08 +02:00
Jouni Malinen
3acb50056c Remove src/rsn_supp from default header path 2009-11-29 18:28:08 +02:00
Jouni Malinen
90973fb2fd Remove src/common from default header file path
This makes it clearer which files are including header from src/common.
Some of these cases should probably be cleaned up in the future not to
do that.

In addition, src/common/nl80211_copy.h and wireless_copy.h were moved
into src/drivers since they are only used by driver wrappers and do not
need to live in src/common.
2009-11-29 17:51:55 +02:00
Jouni Malinen
b14912025f Comment out unused functions if IEEE8021X_EAPOL is not defined 2009-05-29 22:35:31 +03:00
Jouni Malinen
4bc181ecc7 Add new wpa_supplicant driver op for setting 802.1X port status
This can be used with drivers that implement PAE to control whether
normal data frames (non-EAPOL) are allowed.
2009-04-22 16:01:37 +03:00
Jouni Malinen
83935317a7 Disconnect if 4-way handshake processing fails
There is no point in trying to continue if a 4-way handshake frame is
discarded or if PTK/GTK/IGTK configuration fails. Force the client to
disconnect in such a case to avoid confusing user by claiming the
connection was successfully completed.
2009-04-20 11:35:21 +03:00
Jouni Malinen
2d5b792d2b Add preliminary hostapd data structure initialization for AP mode
wpa_supplicant can now initialize hostapd data structures when mode=2 is
used to set up an AP. The hostapd configuration is not yet set based on
wpa_supplicant network configuration block. In addition, the glue code
for hostapd driver_ops needs number of functions that will be needed for
AP functionality.
2009-03-26 20:37:05 +02:00
Jouni Malinen
c2a0407851 Add SME support (separate authentication and association)
This can be used, e.g., with mac80211-based Linux drivers with
nl80211. This allows over-the-air FT protocol to be used (IEEE
802.11r).

Since the nl80211 interface needed for this is very recent (added
today  into wireless-testing.git), driver_nl80211.c has backwards
compatibility code that uses WEXT for association if the kernel does
not support the new commands. This compatibility code can be
disabled by defining NO_WEXT_COMPAT. That code will also be removed
at  some point to clean up driver_nl80211.c.
2009-03-20 22:26:41 +02:00
Jouni Malinen
0f057fb2c7 Added a separate ctx pointer for wpa_msg() calls in WPA supp
This is needed to allow IBSS RSN to use per-peer context while
maintaining support for wpa_msg() calls to get *wpa_s as the pointer.
2009-01-17 17:54:40 +02:00
Jouni Malinen
398cfbf6be WPS: Moved mac_addr and uuid configuration into wps_context
There is no need to complicate EAPOL and EAP interfaces with WPS
specific parameters now that wps_context is passed through.
2008-11-28 20:44:47 +02:00
Jouni Malinen
116654ce24 WPS: Moved wps_context initialization into wps_supplicant.c
The wps_context data is now managed at wpa_supplicant, not EAP-WSC. This
makes wpa_supplicant design for WPS match with hostapd one and also
makes it easier configure whatever parameters and callbacks are needed
for WPS.
2008-11-28 20:32:13 +02:00
Jouni Malinen
fa201b694f WPS: Move WPS glue code from wpas_glue.c to wps_supplicant.c
This cleans up the internal interface between different modules and is
the first step in getting wpa_supplicant design closer to hostapd as far
as WPS is concerned.
2008-11-28 19:46:22 +02:00
Jouni Malinen
f855f923a7 WPS: Moved UUID configuration from phase1 into global config area 2008-11-26 20:47:24 +02:00
Jouni Malinen
ad08c3633c Added preliminary Wi-Fi Protected Setup (WPS) implementation
This adds WPS support for both hostapd and wpa_supplicant. Both programs
can be configured to act as WPS Enrollee and Registrar. Both PBC and PIN
methods are supported.

Currently, hostapd has more complete configuration option for WPS
parameters and wpa_supplicant configuration style will likely change in
the future. External Registrars are not yet supported in hostapd or
wpa_supplicant. While wpa_supplicant has initial support for acting as
an Registrar to configure an AP, this is still using number of hardcoded
parameters which will need to be made configurable for proper operation.
2008-11-23 19:34:26 +02:00
Jouni Malinen
46690a3b9b Added an optional mitigation mechanism for certain attacks against TKIP by
delaying Michael MIC error reports by a random amount of time between 0 and
60 seconds if multiple Michael MIC failures are detected with the same PTK
(i.e., the Authenticator does not rekey PTK on first failure report). This
is disabled by default and can be enabled with a build option
CONFIG_DELAYED_MIC_ERROR_REPORT=y in .config.

This may help in making a chopchop attack take much longer time by forcing
the attacker to wait 60 seconds before knowing whether a modified frame
resulted in a MIC failure.
2008-11-08 04:43:12 +02:00
Jouni Malinen
581a8cde77 Added support for enforcing frequent PTK rekeying
Added a new configuration option, wpa_ptk_rekey, that can be used to
enforce frequent PTK rekeying, e.g., to mitigate some attacks against TKIP
deficiencies. This can be set either by the Authenticator (to initiate
periodic 4-way handshake to rekey PTK) or by the Supplicant (to request
Authenticator to rekey PTK).

With both wpa_ptk_rekey and wpa_group_rekey (in hostapd) set to 600, TKIP
keys will not be used for more than 10 minutes which may make some attacks
against TKIP more difficult to implement.
2008-11-06 19:57:21 +02:00
Jouni Malinen
0930209dc2 Register a quick auth timeout if EAPOL fails to avoid long waits
This may be needed if the AP does not disconnect in case of EAP-FAST
unauthenticated provisioning (EAP-Failure). Adding the local short timeout
will speed up the process in such a case by reducing the wait (which can
often be up to 60 seconds).
2008-10-02 17:27:24 +03:00
Jouni Malinen
c08b9180cd Save config after blob updates from EAP (if update_config=1)
This allows EAP-FAST PAC updates to be stored when using config blobs
instead of external files.
2008-10-02 14:10:53 +03:00