Commit graph

1973 commits

Author SHA1 Message Date
Jouni Malinen
4ed34f5acd HS 2.0: Do not indicate HS 2.0 status without WPA2-Enterprise
Hotspot 2.0 allows only WPA2-Enterprise to be used, so other types of
networks must not be indicated as Hotspot 2.0 networks even if they
(incorrectly) advertise HS 2.0 support.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-19 12:54:48 +03:00
Jouni Malinen
2b95f57ba5 Interworking: Do not reconnect without "auto" parameter
When there was no credential match, but an enabled network block matched
with a scan result, wpa_supplicant reconnected at the end of
interworking_select command even if "auto" parameter was not used. Fix
this by running the reconnect only if requested to automatically select
a network.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-19 12:26:21 +03:00
Jouni Malinen
9af7361b3f Document TLS options in phase1/phase2
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-17 22:27:29 +03:00
Yoni Divinsky
6409b7a715 Supply the connection scan results to bgscan after init
If bgscan is enabled, then bgscan is initiated after the connection,
with no bss scan result information. Since a scan was performed prior to
the connection, the information exists and can be used to initialize the
bgscan's cache.

Signed-hostap: Yoni Divinsky <yoni.divinsky@ti.com>
2012-08-17 20:53:44 +03:00
Jouni Malinen
26a379224c OpenSSL: Implement SHA256 HMAC functions using HMAC API
Use the OpenSSL HMAC implementation instead of the internal sha256.c
implementation of HMAC with SHA256.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-16 22:34:35 +03:00
Jouni Malinen
ab637dcb37 Move SHA256-based PRF function into a separate C file
This makes it easier to conditionally build in SHA256 functions based
on which TLS/crypto library is used.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-16 22:24:11 +03:00
Jouni Malinen
0b5e98557e FIPS: Use OpenSSL CMAC implementation instead of aes-omac1.c
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-16 22:19:53 +03:00
Jouni Malinen
982bafedaf FIPS: Mix in OpenSSL RAND_bytes() into random_get_bytes()
Make sure that the OpenSSL DRBG gets used when generating
random numbers in FIPS mode.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-16 21:49:41 +03:00
Jouni Malinen
030d062fac OpenSSL: Implement SHA1 HMAC functions using HMAC API
Use the OpenSSL HMAC implementation instead of the internal sha1.c
implementation of HMAC with SHA1.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-16 20:38:25 +03:00
Jouni Malinen
d6150094e0 Move SHA1-based PRF function into a separate C file
This makes it easier to conditionally build in SHA1 functions based
on which TLS/crypto library is used.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-16 20:26:16 +03:00
Jouni Malinen
e40c86ad27 OpenSSL: Use library function for PBKDF2 passphrase-to-PSK
Use the OpenSSL PKCS5_PBKDF2_HMAC_SHA1() function instead of the
internal implementation in sha1-pbkdf2.c.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-16 20:26:16 +03:00
Jouni Malinen
6e6909a97e FIPS: Remove MD5 from the CONFIG_FIPS=y build
When CONFIG_FIPS=y is used, do not include MD5 in the build and disable
EAPOL-Key frames that use MD5 (WPA/TKIP and dynamic WEP with IEEE
802.1X).

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-16 20:03:17 +03:00
Jouni Malinen
271dbf1594 FIPS: Do not build md5-non-fips.o unless really needed
This is not needed anymore when using OpenSSL keying exporter
functionality for PRF.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-16 19:58:15 +03:00
Jouni Malinen
c9e08af24f Do not export TLS keys in FIPS mode
Only allow the TLS library keying material exporter functionality to be
used for MSK derivation with TLS-based EAP methods to avoid exporting
internal TLS keys from the library.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-16 19:38:15 +03:00
Jouni Malinen
411f567050 Allow libdl to be linked in after OpenSSL
OpenSSL-based builds may need libdl in the linker line after the OpenSSL
library. CONFIG_TLS_ADD_DL=y can now be used to force that if needed.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-16 19:34:38 +03:00
Jouni Malinen
e001191837 Add "make fips" for wpa_supplicant builds with OpenSSL
This can be used for convenience to build wpa_supplicant with OpenSSL
FIPS object module. CONFIG_FIPS=y is expected to be used in
wpa_supplicant/.config when using this option.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-16 17:53:05 +03:00
Jouni Malinen
4f219667d7 P2P: Use larger GO config timeout if HT40 is used
Increase GO config timeout if HT40 is used since it takes some time
to scan channels for coex purposes before the BSS can be started.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-15 23:19:11 +03:00
Rajkumar Manoharan
e2308e4b45 P2P: Add optional "ht40" argument for p2p_connect
This can be used to start negotiated GO in 40 MHz channel width
in 5GHz band.

Signed-hostap: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
2012-08-15 23:07:44 +03:00
Rajkumar Manoharan
7aeac98509 P2P: Enable 40 MHz support for autonomous P2P group addition
Add optional "ht40" argument for p2p_group_add command to enable 40 MHz
in 5GHz band. This configures the secondary channel, when HT support is
enabled and if the HW supports 40 MHz channel width.

Signed-hostap: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
2012-08-15 22:53:01 +03:00
Rajkumar Manoharan
931228aa10 P2P: Move channel validation into a separate function
Signed-hostap: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
2012-08-15 22:44:34 +03:00
Jouni Malinen
87c7ba8423 wpa_cli: Use helper functions to implement commands
This simplifies wpa_cli implementation greatly and also reduces
the binary size by one third or so.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-15 22:40:07 +03:00
Jouni Malinen
0076869c62 wpa_cli: Add helper functions for building and executing commands
These helper functions can be used to implement most of the common
wpa_cli commands to simplify the implementation.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-15 22:08:21 +03:00
Jouni Malinen
a3f7e5186b Allow non-WPA IEEE 802.1X to be select even if WPA is also enabled
If key_mgmt was set to allow both WPA and non-WPA IEEE 802.1X (i.e., to
IEEE8021X WPA-EAP), non-WPA IEEE 802.1X was rejected while preparing
association parameters. Allow this special case to be handled by
selecting non-WPA case if the scan results for the AP do not include
either WPA or RSN elements.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-15 19:34:04 +03:00
Eyal Shapira
a13e07ec4d Fix adding extra IEs in sched scan
Refactoring done in commit 46ee0427b1
(IEEE 802.11u: Allow Interworking and HESSID to be configured)
broke adding extra IEs in sched scan. The IEs stopped being added
to the scan params within wpa_supplicant_extra_ies() but no code
was added to add them in wpa_supplicant_req_sched_scan().
Fix this and remove unused params arg in wpa_supplicant_extra_ies().

Signed-hostap: Eyal Shapira <eyal@wizery.com>
intended-for: hostap-1
2012-08-13 21:48:55 +03:00
Jouni Malinen
1f52c2f7b5 GAS: Fix reporting of GAS query timeouts
GAS_QUERY_TIMEOUT value was used for two different things - enum for
status callback and #define for internal eloop timeout). The latter
overwrites the former and as such, the timeout reported ended up going
out with value 5 which matches with GAS_QUERY_CANCELLED instead of
GAS_QUERY_TIMEOUT. This value was not used in existing code, so this
should not modify the current behavior. Anyway, the correct reason for
the failure should be reported. Rename the internal #define for the
timeout period to avoid the name conflict. [Bug 463]

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-13 21:33:00 +03:00
Jouni Malinen
067ffa2696 Convert os_realloc() for an array to use os_realloc_array()
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-13 21:21:23 +03:00
Jouni Malinen
f9884c096a Convert os_zalloc() for an array to use os_calloc()
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-13 20:44:21 +03:00
Jouni Malinen
78372bda68 Fix memcmp use in a test program
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-13 19:57:57 +03:00
Jouni Malinen
623ecdd5a2 Remove default ACM=1 from AC_VO and AC_VI
There is no need to mandate admission control (ACM=1) by default, so
clear that flag in the case the configuration file does not specify
wmm_ac_{vo,vi}_acm value. This gets closer to the values mentioned
in the sample hostapd.conf file and reduces the need to specify WMM
parameters in the configuration file for most common use cases.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-12 11:36:45 +03:00
Yoni Divinsky
c26effe15f wpa_supplicant AP/P2P: Enable WMM param configuration
In case of P2P GO and AP mode, wpa_supplicant uses the default hostapd
parameters for WMM. In the default parameters the ACM bit for video and
voice are set to 1, meaning, P2P devices and stations which are
connected to the GO cannot pass voice or video data packets. Allow this
to be changed through wpa_supplicant configuration file with wmm_ac_*
parameters.

Signed-hostap: Yoni Divinsky <yoni.divinsky@ti.com>
2012-08-12 11:34:07 +03:00
Jouni Malinen
e485286c67 Remove unnecessary bssid_changed check
The os_memcmp of bssid and wpa_s->bssid cannot return 0 in this
code path since identical os_memcmp was already done above.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-11 17:54:43 +03:00
Masashi Honma
0a0c38f63d Do not proceed with association if get_bssid() returns failure
This is the normal flow for association:

wpa_supplicant <--(EVENT_ASSOC event )--  device driver
wpa_supplicant  --( get_bssid()      )--> device driver
wpa_supplicant <--( return BSSID     )--  device driver

However, a device driver could return EINVAL for get_bssid() because it
recognizes it has already been disconnected. When the wpa_supplicant
received EINVAL, the bssid field could be used uninitialized in the
following flow:

wpa_supplicant <--(EVENT_ASSOC event )--  device driver
                                          device driver (receive deauth)
wpa_supplicant  --( get_bssid()      )--> device driver
wpa_supplicant <--( return EINVAL    )--  device driver

Prevent this by requiring the get_bssid() call to succeed when
processing association events.
2012-08-11 17:46:58 +03:00
Arik Nemtsov
b6871ebb17 SME: Correctly check mode HT caps for enabling OBSS scan
Don't assume the 11g mode is always first in the list of mode (sometimes
it isn't). Traverse the array of modes and check the HT40 capability is
turned on for 11g.

Signed-hostap: Arik Nemtsov <arik@wizery.com>
2012-08-11 17:08:54 +03:00
Jouni Malinen
8dba4aef11 P2P: Move group removal reason to a function parameter
wpa_s->removal_reason was set only when calling wpas_p2p_group_delete()
and while couple of call places did not set this, it should really be
set in each case. As such, it works better as a function parameter than
a variable in struct wpa_supplicant.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-11 12:41:31 +03:00
Michael Naumov
30ee769235 P2P: p2p_group_remove should fail on non-P2P interface
p2p_group_remove should only attempt to remove P2P group
interfaces and fail on non-P2P group interfaces.

Signed-hostap: Michael Naumov <michael.naumov@intel.com>
Signed-hostap: Nirav Shah <nirav.j2.shah@intel.com>
2012-08-11 12:06:23 +03:00
Eyal Shapira
462a7439e1 Add p2p_go_max_inactivity config option
This enables setting a different max inactivity timeout for P2P GO.
This timeout is used to detect inactive clients. In some scenarios
it may be useful to have control over this and set a shorter timeout
than the default 300s. For example when running STA and P2P GO interfaces
concurrently, the STA interface may perform scans which may cause the
GO to miss a disassoc / deauth frames from a client and keep assuming
that the client is connected until the inactivity detection kicks in.
300 secs is a bit too long for such scenarios and creates a bad user
experience.

Signed-hostap: Eyal Shapira <eyal@wizery.com>
2012-08-10 16:28:38 +03:00
Paul Stewart
6ed3117561 wpa_supplicant: Add DBus "Reassociate" command
Create a DBus command to reassociate, similar to the
ctrl-interface "reassociate" command.

Signed-hostap: Paul Stewart <pstew@chromium.org>
2012-08-09 13:54:36 +03:00
Jouni Malinen
e100828b76 Return wpabuf from radius_msg_get_eap()
This simplifies the implementation by using the buffer type to which the
returned data will be converted anyway. This avoids one memory
allocation for each processed RADIUS message.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-07 18:14:42 +03:00
Jouni Malinen
e122bb70b8 hostapd: Add alternative format for configuring SSID
The new ssid2 parameter can be used as an alternative mechanism for
configuring SSID for hostapd. It uses the same formats that
wpa_supplicant uses in the configuration file for strings.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-07 16:27:40 +03:00
Jouni Malinen
b87d70c88a Make wpa_config_parse_string() a shared function
This will be used in future hostapd configuration parser changes.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-07 16:13:51 +03:00
Jouni Malinen
986de33d5c Convert remaining SSID routines from char* to u8*
This makes it more explicit that the SSID is not a null terminated
C string.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-07 16:07:25 +03:00
Jouni Malinen
5c4b93d72e Add support for using printf-escaped strings in configuration
P"<escaped string>" can now be used as an alternative method for
specifying non-ASCII strings (including control characters). For
example, ssid=P"abc\x00test".

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-07 13:50:39 +03:00
Jouni Malinen
059d3a9075 wpa_cli: Handle wpa_supplicant termination more cleanly
Process CTRL-EVENT-TERMINATING in wpa_cli interactive mode and close
ctrl_iface connection without trying to detach the monitor interface
when this happens. This avoids a timeout on the DETACH command. In
addition, print out connection lost/re-established messages without
overriding the edit line.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-05 22:27:52 +03:00
Jouni Malinen
8e897ae37b wpa_cli: Go through ifname determination on connection retries
This is needed to allow the default behavior (pick first interface) to
be used in cases where wpa_supplicant is not available when wpa_cli is
started in interactive mode.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-05 22:04:22 +03:00
Jouni Malinen
db3a03222e wpa_cli: Fix an issue in the cleanup of udp-remote commits
wpa_ctrl_get_remote_ifname() is defined only for UDP ctrl_iface socket,
so this call needs to be made conditional on build parameters.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-05 21:54:56 +03:00
Jouni Malinen
4be9f27595 wpa_cli: Use eloop during connection attempts in interactive mode
This changes the call flow to allow full eloop operations to be used
while waiting for wpa_cli to establish a connection to wpa_supplicant in
the beginning of an interactive session. This allows the cleanup steps
to be more consistent and avoid debugging issues due to unfreed memory
or other resources if wpa_cli is killed with Ctrl-c.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-05 21:47:18 +03:00
Jouni Malinen
d62aaa7de1 wpa_cli: Fix resource leak on attach failures in interactive mode
When starting interactive mode, wpa_cli is trying to attach the
monitor connection. If that fails, the operation is retried, but
this was done without freeing all the resources that could have
been allocated (mainly, the command connection).

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-05 20:58:44 +03:00
Janusz Dziedzic
4307bb8c85 wpa_cli: Print nice prompt when using remote UDP
When CONFIG_CTRL_IFACE=udp-remote is used, print user frendly PS in
wpa_cli. E.g.,
localhost/wlan0>
192.168.1.1/p2p-wlan-0-0>

Signed-hostap: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2012-08-05 20:50:17 +03:00
Janusz Dziedzic
2d2398a11f edit: Add support for setting prompt string
Signed-hostap: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2012-08-05 20:46:34 +03:00
Janusz Dziedzic
0eed2a8d11 wpa_cli: Add IFNAME command
This command will return wpa_s->ifname that can be used for a nice
prompt in wpa_cli.

Signed-hostap: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2012-08-05 20:12:16 +03:00
Janusz Dziedzic
afadf423db wpa_supplicant: Add optional remote access for ctrl_iface
Add new option for ctrl iface: CONFIG_CTRL_IFACE=udp-remote. This
enables remote access to control interface via UDP port(s). This should
be used for testing purpose only since there is no authentication or
access control on the commands.

Signed-hostap: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2012-08-05 20:01:07 +03:00
Fernando Herrera
c10fe8c1df D-Bus: Fix wpas_dbus_getter_bss_expire_count
bss_expire_count getter was getting a wrong value. Fix it to return
bss_expiration_scan_count.

intended-for: hostap-1
2012-08-05 00:43:19 +03:00
Michael Naumov
a5195e56e8 D-Bus: Remove network_object dictionary entry from signal GroupStarted
The network_object path should be returned by the NetworkAdded signal
and not by the GroupStarted Signal. Starting a Group does not
necessarily validate the network object.

Signed-hostap: Michael Naumov <michael.naumov@intel.com>
Signed-hostap: Nirav Shah <nirav.j2.shah@intel.com>
intended-for: hostap-1
2012-08-05 00:26:36 +03:00
Michael Naumov
2ce7033678 P2P: Add D-Bus python script to perform Disconnect
D-Bus script using python glib is added to perform Disconnect on an
interface.

Signed-hostap: Michael Naumov <michael.naumov@intel.com>
Signed-hostap: Nirav Shah <nirav.j2.shah@intel.com>
2012-08-05 00:24:40 +03:00
Michael Naumov
008d824f20 P2P: Add D-Bus python script to perform p2p_invite
D-Bus script using python glib is added to perform p2p_invite on a group
interface to invite a peer.

Signed-hostap: Michael Naumov <michael.naumov@intel.com>
Signed-hostap: Nirav Shah <nirav.j2.shah@intel.com>
2012-08-05 00:20:48 +03:00
Dmitry Shmidt
35aa088a32 Add 'get_capability channels' command for ctrl_iface
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2012-08-04 21:17:04 +03:00
Ben Greear
481cac211e Add some debug info for config file error cases
It didn't always spit out useful stuff when reading config failed.

Signed-off-by: Ben Greear <greearb@candelatech.com>
2012-08-04 20:38:50 +03:00
Ben Greear
4fdc8def88 Make UNIX socket non-blocking for ctrl_iface
This keeps wpa_cli from hanging forever if the other end of the socket
dies.

Signed-hostap: Ben Greear <greearb@candelatech.com>
2012-08-04 20:34:27 +03:00
jim1_lin
c8b245b6a4 WPS: Update dev.config_methods in wps_update_config
dev.config_methods was not updated when wps_update_config was called.
This could lead to mismatching config methods between Probe Request and
M1 packets. Add missing part for it.
2012-08-04 20:14:59 +03:00
Paul Stewart
21270bb4b3 Fix a couple memory leaks
Found using valgrind.

Signed-hostap: Paul Stewart <pstew@chromium.org>
2012-08-04 20:10:08 +03:00
Jouni Malinen
02af9c90fb EXT PW: Allow Interwork cred block to use external storage for password
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-03 22:15:42 +03:00
Jouni Malinen
0ebb23e340 EXT PW: Add support for password parameter from external storage
This allows the password parameter for EAP methods to be fetched
from an external storage.

Following example can be used for developer testing:

ext_password_backend=test:pw1=password|pw2=testing

network={
    key_mgmt=WPA-EAP
    eap=TTLS
    identity="user"
    password=ext:pw1
    ca_cert="ca.pem"
    phase2="auth=PAP"
}

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-03 22:15:42 +03:00
Jouni Malinen
9173b16fd1 EXT PW: Add support for psk parameter from external storage
This allows wpa_supplicant configuration file to be created without
the PSK/passphrase value included in the file when a backend for
external password storage is available.

Following example can be used for developer testing:

ext_password_backend=test:psk1=12345678
network={
    ssid="test-psk"
    key_mgmt=WPA-PSK
    psk=ext:psk1
}

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-03 22:15:42 +03:00
Jouni Malinen
306ae22556 EXT PW: Add framework for supporting external password storage
This new mechanism can be used to make wpa_supplicant using external
storage (e.g., key store in the operating system) for passwords,
passphrases, and PSKs. This commit is only adding the framework part
needed to support this, i.e., no actual configuration parameter can
yet use this new mechanism. In addition, only a simple test backend
is added to allow developer testing of the functionality.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-03 22:15:42 +03:00
Jouni Malinen
2518aad3e8 Move PSK/passphrase configuration check into use time from parsing
Instead of rejecting network blocks without PSK/passphrase at the time
the configuration file is read, allow such configuration to be loaded
and only behave as if the network block with missing PSK/passphrase is
disabled.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-03 22:15:42 +03:00
Jouni Malinen
1ecd2ada33 Interworking: Set key_mgmt parameter for the temporary network block
Previously, this was left to the default (WPA-EAP WPA-PSK) value which
could potentially result in unexpected behavior if an AP were to enable
both WPA2-Enterprise and WPA2-Personal in the same BSS. While this is
not really that likely for APs supporting Interworking, it is good to
get the PSK option removed to avoid any issues with missing
passphrase/PSK configuration parameter.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-03 22:15:42 +03:00
Jouni Malinen
955567bc09 Interworking: Add support for using Roaming Consortium OI for matching
Each cred block can now be matched based on Roaming Consortium OI as an
alternative mechanism to using NAI Realm information. This may be
optimized for efficiency in the future since Roaming Consortium
information is available in scan results without having to go through
ANQP queries. In addition, this is easier to support in case there is a
large number of realms that can be used for authentication.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-02 18:48:31 +03:00
Jouni Malinen
8ca93c59e0 Interworking: Allow pre-configuration of EAP parameters
The new cred block parameters eap, phase1, and phase2 can be used to
select which EAP method is used with network selection instead of using
the value specified in ANQP information (e.g., NAI Realm).

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-02 18:40:45 +03:00
Jouni Malinen
d5b5d801e8 Interworking: Move EAP parameter setting into a separate function
This makes it easier to share the common code with other credential
matching cases in the future.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-02 18:35:18 +03:00
Xi Chen
75cad1a0d4 WNM: Add WNM-Sleep Mode for station mode
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-01 13:21:27 +03:00
Xi Chen
a884be9da1 WNM: Add placeholders for WNM driver commands and events
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-01 13:21:20 +03:00
Jay Katabathuni
19a8ad9944 HS 2.0: Add Hotspot 2.0 Indication for AP
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-07-30 18:23:38 +03:00
Thomas Pedersen
bf8d6d2430 nl80211: Support setting sched scan RSSI threshold
Allow the user to configure an RSSI threshold in dBm below which the
nl80211 driver won't report scan results. Currently only supported
during scheduled (PNO) scans.

Signed-off-by: Thomas Pedersen <c_tpeder@qca.qualcomm.com>
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-07-25 16:56:43 +03:00
Jouni Malinen
cae2119c86 P2P: Leave forced BSSID parameter for P2P group
P2P group is only going to use a single GO, so we can leave the fixed
BSSID parameter set for the actual data connection in addition to the
initial WPS provisionign step. This can speed up operations with drivers
that select BSS internally by allowing them to skip an extra scan when
the BSSID and frequency of the GO is already known.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-07-25 16:18:12 +03:00
Michael Naumov
b682d6a73d P2P: Add D-Bus python scripts to perform additional commands
Four D-Bus scripts using python glib are added to perform the following
operations: p2p_flush, p2p_group_add, p2p_listen and p2p_stop_find.

Signed-hostap: Michael Naumov <michael.naumov@intel.com>
Signed-hostap: Nirav Shah <nirav.j2.shah@intel.com>
2012-07-04 21:07:53 +03:00
Cyril Brulebois
46d69fa5c6 wpa_gui: Fix compilation with gcc/g++ 4.7
Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
intended-for: hostap-1
2012-07-04 21:01:04 +03:00
Jouni Malinen
b9b12d02f0 autoscan: Fix potential freeing of uninitialized pointer
Commit 7c865c6853 introduced a code
path that can skip extra_ie initialization in wpa_supplicant_scan().
This could result in semi-random crashes when using the autoscan
mechanism. Fix this by initializing extra_ie to NULL.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-07-03 20:54:40 +03:00
Jouni Malinen
be1514a3e9 Update license notification in signalbar implementation
This updates the license notification to use only the BSD license. The
changes were acknowledged by email (Kel Modderman <kel@otaku42.de>,
Mon, 2 Jul 2012 20:02:37 +1000).

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-07-02 20:48:24 +03:00
Jouni Malinen
17096391c5 wpa_gui: Update licence notification text in wpa_gui
The Help|About message box was still referring to the old license
alternatives.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-07-02 12:11:01 +03:00
Jouni Malinen
c5a3cebfc8 Update license notification in D-Bus interface files
This updates these files to use the license notification that uses only
the BSD license. The changes were acknowledged by email (Dan Williams
<dcbw@redhat.com>, Sun, 01 Jul 2012 15:53:36 -0500).

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-07-02 12:04:38 +03:00
Jouni Malinen
dcc3305701 Move p2p_connect PIN format validation into a separate function
This functionality could be shared for other commands, too, so move
it to a common function. In addition, implement the validation in a
bit more strict way to avoid accepting values like '-123' as a valid
PIN.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-06-30 21:27:32 +03:00
Masashi Honma
36ebf7a1b2 P2P: Add error message for invalid PIN
Reject invalid PIN value in p2p_connect command. Before this, typos
like "pbd" as the third parameter could have resulted in OK return
value since this parameter was interpreted as the PIN.

Signed-hostap: Masashi Honma <masashi.honma@gmail.com>
2012-06-30 21:19:12 +03:00
Jouni Malinen
10ac7ddf33 Do not share special scan results with virtual interfaces
When a special scan_res_handler is used the scan parameters may not have
been suitable for other purposes (e.g., during a p2p_find operation). As
such, do not indicate such scan results to other virtual interfaces
using the same radio.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-06-30 20:30:40 +03:00
Jouni Malinen
3df2f4fe99 P2P: Remove unused P2P_SCAN_SPECIFIC
This is not used anymore after the commit
e6ecfc4fd3.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-06-30 20:20:29 +03:00
Gary Morain
0bb1e425b5 Export disconnect reason code to dbus
In the properties changed signal, added a new property
"DisconnectReason", which carries the IEEE 802.11 reason code of the
most recent disassociation or deauthentication event. The reason code is
negative if it is locally generated. The property is sent to the DBUS
immediately so as to prevent it from being coalesced with other
disconnect events.

Signed-off-by: Gary Morain <gmorain@chromium.org>
2012-06-30 16:43:50 +03:00
Michael Naumov
acc5f4ec60 P2P: Add dbus python scripts to perform p2p_find and p2p_connect
Two DBUS scripts using python glib are added to perform p2p_find and
p2p_connect operations respectively. p2p_connect script just performs
the traditional connect to create a new p2p group. Additional updates
will be required to perform join, auth etc. al.

Signed-hostap: Michael Naumov <michael.naumov@intel.com>
Signed-hostap: Nirav Shah <nirav.j2.shah@intel.com>
2012-06-30 13:11:26 +03:00
Jouni Malinen
51ca03f470 WPS: Document NFC use cases with password/config token
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-06-28 21:28:49 +03:00
Jouni Malinen
bfc62fe133 WPS: Share a single function for generating NFS password tokens
There is no need for both hostapd and wpa_supplicant to have their
own functions for this.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-06-28 21:01:37 +03:00
Jouni Malinen
40a5e3bfde WPS: Add a standalone tool for building NFC password tokens
nfc_pw_token can be used to build random NFC password token for WPS.
This tool prints out the wpa_supplicant.conf (or hostapd.conf)
parameters and the hexdump of the WPS password token (with and without
NDEF encapsulation) so that it can be written to a NFC tag with an
external program.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-06-28 21:01:37 +03:00
Jouni Malinen
72df0cd28c WPS: Use random_get_bytes() for NFC password id
os_random() may not be seeded properly, so use stronger mechanism for
generating the password id for NFC password tokens.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-06-28 20:40:16 +03:00
Jouni Malinen
e484e927a6 WPS: Allow NFC password token from AP to be used with wps_reg
The AP PIN on wps_reg command can now be replaced with special value
"nfc-pw" to use device password from a NFC password token from the AP.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-06-28 19:41:26 +03:00
Jouni Malinen
e6ea2a451c WPS ER: Add support for using NFC password token from an Enrollee
WPS_NFC_TAG_READ ctrl_iface command can now be used to add NFC password
tokens to ER.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-06-28 17:34:46 +03:00
Jouni Malinen
1cea09a9e2 WPS ER: Add support for building NFC configuration token
WPS_ER_NFC_CONFIG_TOKEN command can now be used to build a NFC
configuration token based on AP Settings learnt with WPS_ER_LEARN
or set with WPS_ER_CONFIG.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-06-28 16:35:51 +03:00
Jouni Malinen
71892384da WPS: Fix ifdef use for the new NFC mechanism in wpa_supplicant
Use CONFIG_WPS_NFC instead of CONFIG_WPS_OOB for the NFC specific
new ctrl_iface commands.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-06-28 14:07:22 +03:00
Jouni Malinen
d7645d239d WPS: Add support for NFC configuration token from external program
The new wpa_supplicant ctrl_iface command WPS_NFC_TAG_READ can now be
used to process NFC tags read by external programs to initiate
wpa_supplicant to use NFC Configuration Token to create a new network.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-06-28 13:59:29 +03:00
Jouni Malinen
5bb7ae1f0c WPS: Fix error case in NFC password token generation
Need to verify that wps_build_nfc_pw_token() returned a valid buffer
before trying to encapsulate it for NDEF.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-06-28 13:23:58 +03:00
Jouni Malinen
3f2c8ba6d3 WPS: Add new mechanism for NFC config method using password token
Instead of requiring low-level access to an NFC device and synchronous
operations, the new WPS_NFC_TOKEN and WPS_NFC ctrl_iface commands can be
used to build a NFC password token and initiate WPS protocol run using
that token (or pre-configured values) as separate commands. The
WPS_NFC_TOKEN output can be written to a NFC tag using an external
program, i.e., wpa_supplicant does not need to have low-level code for
NFC operations for this.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-06-27 21:22:12 +03:00
Jouni Malinen
99f0032409 Allow autoscan parameters to be changed in SCANNING state
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-06-26 20:11:25 +03:00
Jouni Malinen
c3d1223848 Reinitialize autoscan on explicit reassocciate/reconnect command
This clears the exponential scan interval back to the base value
when a reconnection is requested explicitly.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-06-26 20:05:51 +03:00
Jouni Malinen
d7ded75832 Cancel pending scan request on DISCONNECT command
Previously, a pending scan request could be left running when processing
DISCONNECT command from control interface. This can result in unexpected
scan, so cancel the request to avoid this.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-06-26 19:57:03 +03:00
Jouni Malinen
992189991c Start autoscan for first connection attempt
Use wpa_supplicant_set_state() to initialize state to DISCONNECT so that
autoscan gets initialized properly. This needs a change in
autoscan_init() to avoid extra scan request that would postpone the
first scan request when an interface is added.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-06-26 19:52:46 +03:00
Jouni Malinen
460b36d0c0 Fix autoscan exponential to limit interval in all cases
The first time the limit is exceeded could result in using larger
value - avoid that by limiting the interval also in that case.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-06-26 19:51:06 +03:00
Jouni Malinen
ccea4eb3e8 Fix autoscan exponential to start with the base value
Initial implementation used base^2 as the starting value.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-06-26 19:47:25 +03:00
Jouni Malinen
1aea2ca325 Write autoscan parameter to config file on updates
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-06-26 19:43:05 +03:00
Tomasz Bursztyka
e3659c89d2 Add a simple periodic autoscan module
This module will sets a fixed scanning interval. Thus, the parameter to
this module is following this format: <fixed interval>

Signed-hostap: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2012-06-26 19:28:21 +03:00
Tomasz Bursztyka
c0fba2b38d Add autoscan module named exponential
This module will compute the interval on a base exponential. Thus,
params to this module are following this format: <base>:<limit>

Signed-hostap: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2012-06-26 19:22:56 +03:00
Tomasz Bursztyka
2bdd834257 Add autoscan command into wpa_cli
Signed-hostap: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2012-06-26 19:11:17 +03:00
Tomasz Bursztyka
bc5d330ae0 Add ctrl iface command for autoscan
Signed-hostap: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2012-06-26 19:09:47 +03:00
Tomasz Bursztyka
67892d5c0d D-Bus: Add AutoScan interface method to set/unset autoscan parameters
Signed-hostap: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2012-06-26 19:05:09 +03:00
Tomasz Bursztyka
7c865c6853 Add automatic scanning support
Like bgscan, autoscan is an optional module based feature to automate
scanning but while disconnected or inactive.

Instead of requesting directly a scan, it only sets the scan_interval
and the sched_scan_interval. So, if the driver supports sched_scan,
autoscan will be able to tweak its interval. Otherwise, the tweaked
scan_interval will be used. If scan parameters needs to be tweaked, an
autoscan_params pointer in wpa_s will provide those. So req_scan /
req_sched_scan will not set the scan parameters as they usually do, but
instead will use this pointer.

Modules will not have to request a scan directly, like bgscan does.
Instead, it will need to return the interval it wants after each
notification.

Signed-hostap: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2012-06-26 18:55:41 +03:00
Tomasz Bursztyka
b0786fba71 Add autoscan parameters support in config file
Signed-hostap: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2012-06-26 18:09:57 +03:00
Thomas Pedersen
1b487b8b1e nl80211: Handle CH_SWITCH event
Some drivers may independently decide to switch channels. Handle this by
updating the hostapd and wpa_supplicant AP and GO configuration.

Signed-hostap: Thomas Pedersen <c_tpeder@qca.qualcomm.com>
2012-06-25 14:45:14 +03:00
Jouni Malinen
c1c023429b Set state to DISCONNECTED on auth/assoc failures
Some of the authentication/association failure paths left wpa_state to
its previous value. This can result in unexpected behavior when
wpa_supplicant tries to find an AP to connect to since the uncleared
state can result the in the selected BSS being ignored if it is same as
the previously used BSS. This could happen, e.g., when wpa_supplicant
SME was used and the AP rejected authentication. Fix this by explicitly
setting state to DISCONNECTED on auth/assoc failures that did not yet do
this.

Signed-hostap: Jouni Malinen <j@w1.fi>
intended-for: hostap-1
2012-06-25 14:23:25 +03:00
Sunil Dutt Undekari
5bda43cdee P2P: Reject p2p_find when in provisioning
A p2p_find during provisioning shall not allow the enrollee to
pick the network, hence disable p2p_find during provisioning.

Signed-hostap: Sunil Dutt Undekari <duttus@codeaurora.org>
2012-06-25 14:05:49 +03:00
Jouni Malinen
ef3e60bf22 Describe CONFIG_AP=y and CONFIG_P2P=y in defconfig
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-06-24 01:07:15 +03:00
Jouni Malinen
781d8e0f2b Fix a typo
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-06-24 00:59:06 +03:00
Aarthi Thiruvengadam
c66cf68d5c P2P: Fix fallback to GO Negotiation to avoid PD-before-join timeout
The wpas_p2p_pd_before_join_timeout could be left behind if the PD
Request in p2p_connect-auto case does not succeed. This timeout can
result in unexpected operations since it could trigger join operation
while going through GO Negotiation. Fix this by canceling the timeout
when falling back to GO Negotiation.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-06-20 21:38:31 +03:00
Jithu Jance
ef35f5a0fd P2P: Add driver op for requesting GO/AP channel switch
Signed-hostap: Jithu Jance <jithu@broadcom.com>
2012-06-10 20:54:31 +03:00
Jithu Jance
b9cfc09a81 P2P: Add preference setting for concurrent use cases
Add an additional parameter to prioritize either sta or p2p connection
to resolve conflicts arising during single channel concurrency.

Signed-hostap: Jithu Jance <jithu@broadcom.com>
2012-06-10 20:53:09 +03:00
Jouni Malinen
a0227929dc P2P: Do not use reassociation after getting disassociated
This avoids issues with some APs rejecting a reassociation if the
station is not currently associated as reported by Yossi Wortzel.
The change is based on a patch from Arik Nemtsov.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-06-10 19:51:36 +03:00
Jouni Malinen
73ccd08378 P2P: Fix group formation timeout on GO during WPS step
Commit 361cdf3400 changed the way the
group formation timeout is used on P2P client. However, it resulted in
clearing the timeout on the GO when the GO started beaconing. This is
not correct since the timeout is supposed to be maintained until at
least the completion of the WPS provisioning step. Fix this regression
by clearing the timeout here only in the case we are not GO in group
formation phase.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-06-08 18:22:03 +03:00
Jouni Malinen
476dea24ff WPS: Cancel WPS operation also in DISCONNECTED state
It is possible for wpa_state to be WPA_DISCONNECTED when a new scan is
scheduled to be started in the future. If wpas_wps_cancel() gets called
(e.g., through control interface wps_cancel or a P2P group removal)
while in that state, the WPS operation (scan request and special network
block) were not removed. Fix this by clearing the WPS operations both in
WPA_SCANNING and WPA_DISCONNECTED states.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
intended-for: hostap-1
2012-06-06 22:07:11 +03:00
Jouni Malinen
5b37633364 P2P: Fix scan_res_handler setting for p2p_scan
The previous version set scan_res_handler unconditionally and then
cleared it if scan request failed. This can result in incorrect clearing
of the handler to NULL for a previously started scan that has not yet
completed. This can make p2p_find command fail to use the
start-after-scan-completion mechanism in some cases. Fix this by setting
scan_res_handler properly after having verified that the driver command
for starting the scan was successful.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
intended-for: hostap-1
2012-06-06 17:07:46 +03:00
Sunil Dutt Undekari
84286a227b P2P: Improve p2p_prov_disc-auto robustness
Perform addition additional scan runs on the operating channel of the GO
(if known from previous scan results) and fall back to initiate the PD
for GO Negotiation if these additional scans do not detect the peer as
GO.

Signed-hostap: Sunil Dutt Undekari <duttus@codeaurora.org>
2012-06-06 15:46:05 +03:00
Nirav Shah
ad85320234 P2P: Fix P2P Group Formation timeout registration (use parent iface)
Commit 361cdf3400 extended the use of
group formation timeout for the way handshake, but the registration was
done on the group_interface while the cancellation was done on the
parent interface. Fix the registration to set the eloop timeout on
parent to address potential issues when using a separate group
interface.

Signed-hostap: Nirav Shah <nirav.j2.shah@intel.com>
2012-06-04 21:58:34 +03:00
Paul Stewart
a6b71f726a bss: Don't remove a BSS that is in use
When looking for a BSS to eject due to too many entries, never
pick one that is in use.  Otherwise, we run the risk of having
pointers to freed data.

Signed-hostap: Paul Stewart <pstew@chromium.org>
2012-06-04 21:52:08 +03:00
Paul Stewart
dd7fec1f29 wpa_supplicant: Report EAP connection progress to DBus
Send an "EAP" signal via the new DBus interface under various
conditions during EAP authentication:

  - During method selection (ACK and NAK)
  - During certificate verification
  - While sending and receiving TLS alert messages
  - EAP success and failure messages

This provides DBus callers a number of new tools:

  - The ability to probe an AP for available EAP methods
    (given an identity).
  - The ability to identify why the remote certificate was
    not verified.
  - The ability to identify why the remote peer refused
    a TLS connection.

Signed-hostap: Paul Stewart <pstew@chromium.org>
2012-06-04 21:10:01 +03:00
Etay Luz
fdfb1c8bcf wpa_supplicant: Support dtim_period configuration for AP mode
Signed-off-by: Etay Luz <eluz@qca.qualcomm.com>
2012-06-04 17:52:37 +03:00
Jouni Malinen
f5d4dd5ad4 WNM: Send empty IPv4 packet as keep-alive for now
Use an empty IPv4 packet as the keep-alive packet for WNM BSS max idle
period mechanism. This is not really the best possible frame to use for
this, but for now, it can do until a more suitable frame is figured out
for this (e.g., special LLC header to indicate link test purposes).

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-05-28 14:36:23 -07:00
Jouni Malinen
597c7a8dd8 WNM: Fix build without CONFIG_SME=y
Commit b6668734ab missed #ifdef CONFIG_SME
protection around wpa_s->sme access.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-05-27 18:17:41 -07:00
Jouni Malinen
b6668734ab WNM: Add advertisement of BSS max idle period
If WNM is enabled for the build (CONFIG_WNM=y), add BSS max idle period
information to the (Re)Association Response frame from the AP and parse
this information on the station. For SME-in-wpa_supplicant case, add a
timer to handle periodic transmission of the keep-alive frame. The
actual request for the driver to transmit a frame is not yet
implemented.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-05-27 17:35:00 -07:00
Jouni Malinen
b80eb89d8e P2P: Improve handling of p2p_connect-auto fallback
Commit aa9bb7644b improved robustness
of p2p_connect-auto mechanism by using older scan results to help in
determination whether the peer was operating a GO. Improve this by
accepting new GO information from scan-for-WPS-provisioning results
even if the GO is not yet ready for WPS.

In addition, fix an issue where Provision Discovery exchange timeout
could have left offchannel TX operation in progress when the fallback
was used.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-05-14 22:55:43 -04:00
Dmitry Shmidt
dfb42efb34 wpa_supplicant: Make Android makefiles available under the BSD license
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2012-05-14 20:34:24 -04:00
Jouni Malinen
3bc462cb88 P2P: Add option for Provision Discovery before GO Negotiation
This is a workaround for interoperability issues with some deployed P2P
implementations that require a Provision Discovery exchange to be used
before GO Negotiation. The new provdisc parameter for the p2p_connect
command can be used to request this behavior without having to run a
separate p2p_prov_disc command.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-05-11 16:25:47 +03:00
Jouni Malinen
1cbe86e2d6 Add debug prints of scan result IEs
Excessive debug level can now be used to dump the IEs received in scan
results from both Beacon and Probe Response frames. This makes it easier
to debug issues where the driver (or well, more likely cfg80211) does
not update the IEs based on Beacon frames if even a single Probe
Response frame has been received.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-05-11 15:30:05 +03:00
Jouni Malinen
f15854d1e1 Fix BSSID enforcement with driver-based BSS selection
Previously, wpa_supplicant did not specify BSSID to any connection
request if the driver indicated that it will take care of BSS selection.
This is fine for most use cases, but can result to issues if the network
block has an explicit bssid parameter to select which BSS is to be used.
Fix this by setting BSSID and channel when the network block includes the
bssid parameter even if the driver indicates support for BSS selection.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
intended-for: hostap-1
2012-05-11 15:27:46 +03:00
Jouni Malinen
2c1e557507 WPS: Fix BSSID filter handling
If WPS commands are used with a specific BSSID instead of wildcard,
the BSSID that was supposed to be used only for the provisioning step
may end up getting copied to the network block that gets provisioned
based on the WPS credentials. Fix this by clearing ssid->bssid_set
when creating the network block by replacing the block used for WPS
provisioning.

This issue could show up with the provisioned network not getting
selected properly with APs that have multiple radios. Depending on
the driver, this could result in only a single one of the available
BSSes being available or the connection failing completely.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
intended-for: hostap-1
2012-05-11 13:29:43 +03:00
Jouni Malinen
ec4a5d32b1 Add ChangeLog entries from v1.0 release
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-05-10 22:12:07 +03:00
Jouni Malinen
349493bd0c Validate WEP key lengths based on driver capabilities
The nl80211 driver interface does not allow 128-bit WEP to be used
without a vendor specific cipher suite and no such suite is defined for
this purpose. Do not accept WEP key length 16 for nl80211 driver
interface forn ow. wext-interface can still try to use these for
backwards compatibility.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-05-10 14:34:46 +03:00
Ben Greear
157cdad59f wpa_supplicant: Fix overlapping memcpy on WPS interface addition
I think this should fix the following valgrind complaint:

==1972== Source and destination overlap in memcpy(0x5181708, 0x5181708, 16)
==1972==    at 0x4A073BA: memcpy (mc_replace_strmem.c:602)
==1972==    by 0x45872B: wpas_wps_set_uuid (wps_supplicant.c:1116)
==1972==    by 0x4599EC: wpas_wps_update_config (wps_supplicant.c:1747)
==1972==    by 0x4C8DB0: wpa_supplicant_update_config (wpa_supplicant.c:3090)
==1972==    by 0x4C3E5E: wpa_supplicant_reload_configuration (wpa_supplicant.c:746)
==1972==    by 0x4B8B37: wpa_supplicant_ctrl_iface_process (ctrl_iface.c:4082)
==1972==    by 0x4BA39C: wpa_supplicant_ctrl_iface_receive (ctrl_iface_unix.c:168)
==1972==    by 0x4114D4: eloop_sock_table_dispatch_table (eloop.c:335)
==1972==    by 0x411541: eloop_sock_table_dispatch (eloop.c:352)
==1972==    by 0x41200D: eloop_run (eloop.c:766)
==1972==    by 0x4C8B43: wpa_supplicant_run (wpa_supplicant.c:3010)
==1972==    by 0x4D44AD: main (main.c:286)

Signed-hostap: Ben Greear <greearb@candelatech.com>
intended-for: hostap-1
2012-05-10 10:57:59 +03:00
Jouni Malinen
ab28911dbf P2P: Deinitialize global P2P context on P2P mgmt interface removal
The P2P implementation assumes that the first wpa_s interface instance
is used to manage P2P operations and the P2P module maintains a pointer
to this interface in msg_ctx. This can result in issues (e.g., use of
freed memory) when the management interface is removed. Fix this by
deinitializing global P2P data if the interface that created it is
removed. This will disable P2P until the next interface is added.

Signed-hostap: Jouni Malinen <j@w1.fi>
intended-for: hostap-1
2012-05-10 10:49:22 +03:00
Jouni Malinen
2249d7149e HS 2.0: Add Hotspot 2.0 ANQP elements to Interworking queries
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-05-08 23:30:55 +03:00
Jouni Malinen
64855b9682 HS 2.0: Indicate Hotspot 2.0 in BSS table and status
If the AP indicates support for Hotspot 2.0, show this in the
ctrl_iface commands for BSS table and status.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-05-08 23:30:23 +03:00
Jouni Malinen
cb4183249f HS 2.0: Add HS 2.0 Indication element into (Re)Association Request
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-05-08 23:30:04 +03:00
Jay Katabathuni
c923b8a537 HS 2.0: Add Hotspot 2.0 indication into Probe Request
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-05-08 23:29:58 +03:00
Jay Katabathuni
a8918e86b6 HS 2.0: Add Hotspot 2.0 station ctrl_iface
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-05-08 23:29:52 +03:00
Jay Katabathuni
66aadbd7bf HS 2.0: Add runtime configuration of Hotspot 2.0 station
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-05-08 23:29:45 +03:00
Jay Katabathuni
25471fe3b9 HS 2.0: Add Hotspot 2.0 ANQP routines
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-05-08 23:29:40 +03:00
Jouni Malinen
8d2f05462c Remove scripts and notes related to the Windows binary package
There are no plans to continue making the Windows binary package for
wpa_supplicant for 1.x or newer releases, so remove the scripts and
notes that are related to this.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-05-08 20:49:33 +03:00
Jouni Malinen
6f251b6bb5 P2P: Store SSID of the group in p2p_group data
This can be used with P2P management operations that need to verify
whether the local device is operating a specific group based on
P2P Group ID attribute from a peer.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-05-08 17:38:57 +03:00
Jouni Malinen
aa9bb7644b P2P: Allow older scan results to improve p2p_connect-auto robustness
Previusly the peer was assumed to not be operating a GO if the BSS entry
for it was not updated in the single scan run started by
p2p_connect-auto. This is not very robust since a scan may miss the peer
if either a Probe Request or Probe Response frame is lost. Improve
robustness by assuming the peer is still operating the GO and starting
the join operation. If the GO is not found during PD-for-join or the
single-channel scans during the join, fall back to GO Negotiation.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-05-08 17:38:57 +03:00
Jouni Malinen
fea7c3a055 Ignore network blocks that have invalid WEP key length
Do not try to associate with a network that has an invalid or incomplete
configuration because the association or at least data connection would
fail anyway. This commits adds a common function for checking whether a
network block is disabled to make it easier to check network blocks
without having to reject them during configuration file parsing (which
would prevent wpa_supplicant from starting). The only additional check
added in this commit is to verify the WEP key length. Similar checks for
other parameters can be added in future commits.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-05-07 13:39:33 +03:00
Jouni Malinen
d90134e748 Update copyright and license notification in D-Bus interace P2P files
This adds the copyright notice for Intel and moves to the license
notification that uses only the BSD license. The changes were
acknowledged by email ("Berg, Johannes" <johannes.berg@intel.com>,
Mon, 7 May 2012 07:33:53 +0000).

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-05-07 13:07:22 +03:00
Jouni Malinen
4732ee3a87 Add more documentation for IEEE 802.11w/PMF configuration
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-05-05 16:48:23 +03:00
Jouni Malinen
3d332fe75e Fix SIM/USIM determination to support EAP-AKA'
Both EAP-AKA and EAP-AKA' use USIM. Without this change, use of real
USIM card for EAP-AKA' was not allowed to proceed, i.e., only the
software simulated USIM operations were supported.

Signed-hostap: Jouni Malinen <j@w1.fi>
intended-for: hostap-1
2012-05-05 14:19:13 +03:00
Wei-Jen Lin
1298c14594 Allow pbc_in_m1 workaround to be enabled in wpa_supplicant AP mode
This workaround for Windows 7 WPS probing mechanism was previously
allowed only with hostapd, but the same interoperability issue can
happen with wpa_supplicant AP/GO mode. Allow the workaround to be
enabled in wpa_supplicant configuration for these uses.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-05-03 16:51:04 +03:00
Wei-Jen Lin
f571b593ba P2P: Clone max_sta_num parameter for group interfaces
This is needed to allow the max_sta_num parameter set in the main
configuration file to apply to dynamically created P2P group
interfaces.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
intended-for: hostap-1
2012-05-03 16:41:15 +03:00
Jouni Malinen
6434ad09d6 Scan only 2.4 GHz band for OBSS scans
Since we are reporting 20/40 BSS coex information only for 2.4 GHz band,
there is no need to run the full scan on dualband cards.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-05-03 15:55:42 +03:00
Rajkumar Manoharan
c3701c66a5 Add handling of OBSS scan requests and 20/40 BSS coex reports
Add support for HT STA to report 40 MHz intolerance to the associated AP.
A HT station generates a report (20/40 BSS coexistence) of channel list
if it finds a non-HT capable AP or a HT AP which prohibits 40 MHz
transmission (i.e., 40 MHz intolerant bit is set in HT capabilities IE)
from the scan results.

Parse the OBSS scan parameter from Beacon or Probe Response frames and
schedule periodic scan to generate 20/40 coexistence channel report if
requested to do so. This patch decodes Scan Interval alone from the OBSS
Scan Parameters element and triggers scan on timeout.

Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-05-03 15:55:38 +03:00
Jouni Malinen
1f0cc27eb9 Remove unused variable if CONFIG_P2P=y is not used
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-04-28 18:31:01 +03:00
Jouni Malinen
d211881474 Fix D-Bus build without ctrl_iface
Commit 7de5688d68 started using
wpa_supplicant_ctrl_iface_ctrl_rsp_handle() from the D-Bus code, but
left this function in ctrl_iface.c that is included conditionally. Fix
this by moving the common function into wpa_supplicant.c so that it can
be included for builds that include only either ctrl_iface or D-Bus.

Signed-hostap: Jouni Malinen <j@w1.fi>
intended-for: hostap-1
2012-04-27 21:21:31 +03:00
Jouni Malinen
23c84252a4 P2P: Add option to force SSID/passphrase for GO Negotiation
An existing persistent group information can now be used to force GO
Negotiation to use the previously used SSID/passphrase from a persistent
group if we become a GO. This can be used as an alternative to inviting
a new P2P peer to join the group (i.e., use GO Negotiation with GO
intent 15 instead of starting an autonomous GO and using invitation),
e.g., in case a GO Negotiation Request is received from a peer while we
are not running as a GO. The persistent group to use for parameters is
indicated with persistent=<network id> parameter to p2p_connect.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-04-27 18:25:30 +03:00
Jouni Malinen
0918c4bf3b P2P: Add p2p_prov_disc auto mechanism
wpa_supplicant can now be requested to automatically figure out whether
the indicated peer is operating as a GO and if so, use join-a-group
style PD instead of pre-GO Negotiation PD.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-04-26 17:13:03 +03:00
Jouni Malinen
25a94f525c P2P: Fix PD Failure event to show peer device address
The p2p_dev_addr parameter in the P2P-PROV-DISC-FAILURE event (added in
commit f65a239ba4) was supposed to the P2P
Device Address of the peer, not the local device.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-04-26 17:09:02 +03:00
Jouni Malinen
fcbf0b0ca9 Sync wpa_supplicant man page with README changes
The man page source was not up-to-date with removed driver wrappers,
so bring in the wpa_supplicant/README changes to make this somewhat
closer to the current state.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-04-21 19:17:14 +03:00
Jouni Malinen
eab6f5e04a Remove unnecessary EVENT_RX_MGMT data validation
Make wpa_supplicant_event() more consistent by not checking
data in either location handling EVENT_RX_MGMT events. This event
is required to specify the data so this pointer cannot be NULL.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-04-21 18:57:13 +03:00
Adrien Bustany
c9b72c257a P2P: Don't rely on dictionary ordering in wpas_dbus_handler_p2p_add_service
In most languages, DBus dictionaries are mapped to either sorted maps
or hash tables, so you can't control the actual ordering of the
generated a{sv}. Relying on ordering in this method is unnecessary and
makes it use from DBus much harder.

Signed-hostap: Adrien Bustany <adrien.bustany@nokia.com>
2012-04-21 18:28:10 +03:00
Masashi Honma
78039295e6 P2P: Remove unused variable
The "type" variable is not used in wpas_p2p_deinit_global().
So this patch removes it.

Signed-hostap: Masashi Honma <masashi.honma@gmail.com>
2012-04-21 18:21:30 +03:00
Deepthi Gowri
f65a239ba4 P2P: Add provision discovery failure event
Add provisional discovery failure ctrl_iface event
(P2P-PROV-DISC-FAILURE) to indicate to the application layer in case of
PD failure.

Signed-off-by: Deepthi Gowri <deepthi@codeaurora.org>
2012-04-17 19:44:13 +03:00
Jouni Malinen
b55aca4672 Fix sched_scan for max-num-of-scan_ssid=1 networks
When the network configuration includes exactly the number of
scan_ssid=1 networks as the driver supports for scan_sched and no
networks need wildcard SSID scan, there is no need to use sched_scan
timeout. Check this condition and optimize this case to avoid the extra
sched_scan start/stop operations.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-04-17 16:51:09 +03:00
Jouni Malinen
7d21a223f1 Fix sched_scan debug print regarding timeout
The debug messages were showing the opposite of what the actual
implementation was doing for sched_scan timeout.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-04-17 16:32:40 +03:00
Jouni Malinen
54ddd74369 Add disable_scan_offload parameter to disable automatic scan offloading
This new configuration parameter can be used to disable automatic
offloading of scan requests to the driver which was previously used
by default if the driver supported sched_scan.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-04-17 16:30:15 +03:00
Adrien Bustany
e56fc9e81b P2P: Allow wildcard service discovery from DBus API
Using the socket command interface, it is possible to pass a NULL dst to
wpas_p2p_sd_request, however you could not do so using the D-Bus API,
since it required a valid Peer object path. This patch changes the
behavior, so that if the "peer_object" is missing from the parameters,
a NULL dst is passed to wpas_p2p_sd_request.

Signed-hostap: Adrien Bustany <adrien.bustany@nokia.com>
intended-for: hostap-1
2012-04-14 21:06:16 +03:00
Nirav Shah
cca0060f1e P2P: Cleanup P2PDevice D-Bus interface for hostap-1 release
This patch cleans up the P2PDevice D-Bus interface for the hostap-1
release. A spelling error is corrected and P2PDeviceProperties is
renamed to clarify that this data is configuration data and not the
total collection of Properties for the P2PDevice interface.

Signed-hostap: Nirav Shah <nirav.j2.shah@intel.com>
Signed-hostap: Angie Chinchilla <angie.v.chinchilla@intel.com>
intended-for: hostap-1
2012-04-14 20:52:59 +03:00
Nirav Shah
445335fd86 P2P: Fix D-Bus property getters to default to "/" for Group, PeerGO
The D-Bus property getters should not return an error when the
properties are not valid/relevant. Returning an error breaks the
GetAll method in the dbus interface. Change Group and PeerGO
property getters to make GetAll work on P2PDevice.

Signed-hostap: Nirav Shah <nirav.j2.shah@intel.com>
Signed-hostap: Angie Chinchilla <angie.v.chinchilla@intel.com>
intended-for: hostap-1
2012-04-14 20:48:26 +03:00
Dmitry Shmidt
51a0c3d417 wpa_supplicant: Use bss_id list for 'bss FIRST' command
Command 'bss FISRT' should use bss_id list, because 'bss NEXT-N' is using
bss_id list as well.

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2012-04-14 20:39:10 +03:00
Jouni Malinen
5f482d55fd P2P: Allow immediate group idle timeout configuration
A special value p2p_group_idle=-1 can now be used to configure the P2P
group idle mechanism to terminate a P2P client group immediately on any
disconnection after the completion of the initial 4-way handshake.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-04-13 17:03:27 +03:00
Jouni Malinen
361cdf3400 P2P: Extend use of group formation timeout until end of 4-way handshake
Instead of relying on the P2P group idle timeout before the group
connection has been fully established, re-start the group formation
timeout in the end of the WPS provisioning step and clear it at the
successful completion of the initial 4-way handshake. This allows the
P2P group idle timeout to be set to a small value without triggering it
during the initial scan and connection attempt.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-04-13 17:01:15 +03:00
Jouni Malinen
205e6474a1 P2P: Fix p2p_connect join scan handler in error cases
wpa_drv_scan() may fail for the initial p2p_connect join scan request,
e.g., if the driver happened to be scanning at the time the new
operation was initialized. Previously, a special scan result handler was
registered regardless of whether the new scan was started. This could
result in partial scan results (e.g., from p2p_find social scan) from
being used as full results for join (or now more importantly for
p2p_connect auto) purposes. Fix this by registering the new scan result
handler only if wpa_drv_scan() returns success.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-04-13 16:13:14 +03:00
Jouni Malinen
b31be3a0fd P2P: Add automatic GO Negotiation vs. join-a-group selection
p2p_connect command can now be used with an optional "auto" parameter
to request wpa_supplicant to determine automatically whether to use
join-a-group operation (if the peer is operating as a GO) or group
formation. This makes it easier for external programs to handle
connection type selection by offloading this to wpa_supplicant. The
previously used p2p_connect join commands can be replaced with
p2p_connect auto to use this new mechanism.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-04-13 16:04:36 +03:00
Vasanthakumar Thiagarajan
5cbf5fd9bd Allow disable_ht to override 11n configuration in AP mode
This is being done only for station mode, extend it to AP mode as well.

Signed-hostap: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
2012-04-11 16:24:03 +03:00
Jouni Malinen
86ae2e8a42 P2P: Fix shared freq check and support AP mode validation
The previous commit did not use the correct pointer in all operations
and was specific to station mode interfaces. Fix and extend it to work
with AP/GO interfaces, too.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-04-08 20:42:45 +03:00
Jouni Malinen
4b15620609 P2P: Abort join-group operation if concurrent group cannot be supported
If the driver does not indicate support for multi-channel concurrency,
abort join-group operation if the end result would result in use of
multiple operating frequencies with the same radio.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-04-08 20:12:05 +03:00
Jouni Malinen
d755e01b34 Remove forgotten GPL language from man pages and README files
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-04-07 13:17:20 +03:00
Jouni Malinen
705a013b60 Android: Sync build configuration with defconfig changes
This brings up the changes from defconfig into the Android configuration
file, but does not change any of the actual build parameters.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-04-07 13:09:20 +03:00
Jouni Malinen
763a66f471 Remove experimental Symbian build
This was never really completed and is of not much use at this point,
so clean up the repository by removing the Symbian-specific changes.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-04-07 13:00:30 +03:00
Dmitry Shmidt
eff1a95b97 Add RANGE=ALL|N1-N2 selection for ctrl_iface BSS command
Add ability to get information about several BSS's in one call.

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2012-04-07 12:50:25 +03:00
Dmitry Shmidt
5f97dd1c57 Add MASK=0xH option for the ctrl_iface BSS command
This optional parameter to the BSS command can be used to select which
fields are included in the output to avoid having to parse through
unneeded information and to reduce the buffer size.

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2012-04-07 12:50:25 +03:00
Dmitry Shmidt
61ce90857e Move ctrl_iface BSS command response generation into a separate function
This is in preparation for allowing multiple BSS entries to be fetched
with a single command.

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2012-04-07 12:06:35 +03:00
Nirav Shah
103b8f4dea P2P: Disconnect P2P group on supplicant deinit
When a supplicant is deinited and shutting, disconnect from P2P groups.
This fixes a memory leak on variable dbus_groupobj_path on exiting
supplicant.

Signed-hostap: Nirav Shah <nirav.j2.shah@intel.com>
Signed-hostap: Angie Chinchilla <angie.v.chinchilla@intel.com>
2012-04-06 18:41:06 +03:00
Angie Chinchilla
eb6f8c2bd4 P2P: Fix crash for failure case when WSC PIN is entered incorrectly
When forming a P2P group using WSC PIN method, if the PIN is entered
incorrectly the P2P client supplicant instance will crash as a result
of cleanup happening on data that is still in use in a case where a
separate P2P group interface is used.

For example, here is the path for the first crash:
eap_wsc_process():
- creates struct wpabuf tmpbuf; on the stack
- sets data->in_buf = &tmpbuf;
- calls wps_process_msg()
- which calls wps_process_wsc_msg()
- which, in case WPS_M4: calls wps_fail_event()
- which calls wps->event_cb()
- wps->event_cb = wpa_supplicant_wps_event()
- wpa_supplicant_wps_event()
- wpa_supplicant_wps_event_fail()
- which calls wpas_clear_wps()
- which calls wpas_notify_network_removed()
- which calls wpas_p2p_network_removed()
- which calls wpas_p2p_group_formation_timeout()
- which calls wpas_group_formation_completed()
- which calls wpas_p2p_group_delete()
- which calls wpa_supplicant_remove_iface()
- which calls wpa_supplicant_deinit_iface()
- which calls wpa_supplicant_cleanup()
- which calls eapol_sm_deinit()
- ... which eventually uses the ptr data->in_buf to free tmpbuf, our
stack variable and then the supplicant crashes

If you fix this crash, you'll hit another. Fix it and then a segfault.
The way we're cleaning up and deleting data from under ourselves here
just isn't safe, so make the teardown portion of this async.

Signed-hostap: Angie Chinchilla <angie.v.chinchilla@intel.com>
Signed-hostap: Nirav Shah <nirav.j2.shah@intel.com>
intended-for: hostap-1
2012-04-06 18:22:03 +03:00
Jouni Malinen
4f920dc63e Do not write bg_scan_period value if default (-1) has not been changed
There is no need to force this configuration parameter to be written
into the configuration file for each network block that has not modified
the default value.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-04-06 18:11:47 +03:00
Angie Chinchilla
540609c55f Clarify comment in wpa_supplicant/defconfig
I think this comment, as originally stated, says the opposite of
what is meant. Reword to help the next guy.

Signed-hostap: Angie Chinchilla <angie.v.chinchilla@intel.com>
2012-04-06 18:07:44 +03:00
Ed Wildgoose
af548f5320 Save bgscan parameter into configuration file
Signed-off-by: Ed Wildgoose <lists@wildgooses.com>
intended-for: hostap-1
2012-04-06 17:59:34 +03:00
Neeraj Kumar Garg
c772ef43f6 P2P: Update BSS entries in P2P group interface only if P2P IE is present
For concurrency scenarios we should not update the scan results without
P2P IE to P2P group interfaces. This patch is to take care if a scan has
been requested on STA interface and scan results are getting updated
from sibling to P2P group interface. A P2P GO Probe Response for a
legacy STA scan would be without P2P IE. So it will wrongly update the
BSS list of P2P group interface too when results are updated from
sibling.

Since P2P group interfaces are used only for connecting to a P2P group,
it is fine to filter out all non-P2P entries from their BSS table.

Signed-off-by: Neeraj Garg <neerajkg@broadcom.com>
2012-04-06 14:58:22 +03:00
Ben Greear
5a49459ee8 Better wpa_cli error messages when connect fails
Signed-hostap: Ben Greear <greearb@candelatech.com>
2012-04-06 12:15:30 +03:00
Ben Greear
9d05374796 Make bind failure messages unique
This helps someone know which part of the code is complaining.

Signed-hostap: Ben Greear <greearb@candelatech.com>
2012-04-06 12:10:36 +03:00
Ben Greear
bae489d292 wpa_supplicant: Print initialization information on startup
This lets someone know if they have a log file that properly
starts at the beginning.

Signed-hostap: Ben Greear <greearb@candelatech.com>
2012-04-06 11:52:17 +03:00
Johannes Berg
f05b6b18bb Add script to convert wpa_supplicant debug output to pcap
For debugging I needed to look at the frames in a wpa_supplicant debug
log. Looking at the hexdump is a bit tedious, so I wrote a quick script
to convert the nl80211 debugging output to a PCAP file that can be
opened in wireshark.

I've polished the initial raw script a bit to add error messages and to
also record the timestamps to the pcap file.

Hopefully it's useful to somebody else as well.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-04-05 19:49:17 +03:00
Anirban Sirkhell
71dd3b78f9 WPS: Allow vendor specific attribute to be added into M1
wps_vendor_ext_m1 configuration parameter can now be used to add a
vendor specific attribute into the WPS M1 message, e.g., for
Windows Vertical Pairing.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-04-04 00:08:57 +03:00
Jouni Malinen
3fc14102f8 P2P: Remove client group on Deauthentication reason code 3
The GO can indicate that the P2P Group session is ending by sending a
Deauthentication frame with reason code 3 (Deauthenticated because
sending STA is leaving) based on P2P specification section 3.2.9. Use
this reason code to remove the P2P client group without waiting for the
group idle timeout.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-04-03 16:45:28 +03:00
Eliad Peller
dbe7aa2225 P2P: Notify about disconnection only when needed
wpas_notify_state_changed() notified about disconnection when
new_state < WPA_ASSOCIATED, without checking the old state. This
results in extra processing which can be avoided by checking that
old_state was connected.

Signed-hostap: Eliad Peller <eliad@wizery.com>
intended-for: hostap-1
2012-04-01 21:49:03 +03:00
Eliad Peller
3c29244eb7 P2P: Add deinit_p2p_cli op to clear P2P client driver state
On P2P group removal, the GO is deinitialized correctly (and the vif
mode is set back to sta in case of nl80211), but the P2P client mode
wasn't deinitialized, and the nl80211 vif stays in P2P client mode.

Add a new deinit_p2p_cli op (similar to deinit_ap), which currently only
sets the interface back to station mode.

Signed-hostap: Eliad Peller <eliad@wizery.com>
intended-for: hostap-1
2012-04-01 21:41:23 +03:00
Jouni Malinen
e19fded66e Fix Probe Request processing in wpa_supplicant AP mode
Commit 2d43d37ff2 broke EVENT_RX_MGMT
processing in wpa_supplicant AP mode. ap_mgmt_rx() needs to be called
for Probe Request frames even if they get notified through the new
D-Bus signal mechanism.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-04-01 21:27:12 +03:00
Johannes Berg
2d43d37ff2 DBus: Add ability to report probe requests
Some applications require knowing about probe requests to identify
devices. This can be the case in AP mode to see the devices before they
connect, or even in P2P mode when operating as a P2P device to identify
non-P2P peers (P2P peers are identified via PeerFound signals).

As there are typically a lot of probe requests, require that an
interested application subscribes to this signal so the bus isn't always
flooded with these notifications. The notifications in DBus are then
unicast only to that application.

A small test script is also included.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2012-04-01 21:14:48 +03:00
Johannes Berg
baf513d695 Pass signal strength through, fix units
The signal strength is currently never used as the only driver reporting
it is nl80211 which uses IEEE80211_RADIOTAP_DB_ANTSIGNAL which is never
populated by the kernel. The kernel will (soon) populate
IEEE80211_RADIOTAP_DBM_ANTSIGNAL instead though, so use that.

Also, since it was never really populated, we can redefine the signal
field to be in dBm units only.

My next patch will also require knowing the signal strength of probe
requests throughout the code (where available), so add it to the
necessary APIs.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2012-04-01 18:48:12 +03:00
Mukesh Agrawal
c6e86b63d2 Create DBus getter/setter for ScanInterval
Enable control of wpa_s->scan_interval via D-Bus. This parameter
controls the delay between successive scans for a suitable AP.

Also, update dbus.doxygen with ScanInterval, and some other
parameters that were undocumented.

Signed-hostap: Mukesh Agrawal <quiche@chromium.org>
2012-04-01 18:05:22 +03:00
Jouni Malinen
ca8e039fec Fix memory leaks on radius_client_send error paths
In case this function returns an error, the RADIUS message needs to
freed in the caller.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-04-01 17:55:20 +03:00
Nirav Shah
024d018b55 Clean up: Replace standard lib methods with os.h ones
Some of the standard lib functions being used directly are redefined in
src/utils/os.h thus providing an abstraction. Change code to use os_*
functions instead of directly using the lib functions.

Signed-hostap: Nirav Shah <nirav.j2.shah@intel.com>
Signed-hostap: Angie Chinchilla <angie.v.chinchilla@intel.com>
2012-03-31 21:13:53 +03:00
Johannes Berg
4f68895e92 debug: Add option to log to Linux tracing
Add the option (-T) to wpa_supplicant to log all debug messages into the
kernel tracing, allowing to aggregate kernel debugging with
wpa_supplicant debugging and recording all with trace-cmd.

Since tracing has relatively low overhead and can be filtered
afterwards, record all messages regardless of log level. However, it
will honor the -K option and not record key material by default.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2012-03-31 13:55:33 +03:00
Bala Shanmugam
1f6c0ab872 Allow background scan period to be configured
A network block specific background scan period can now be configured
for drivers that implement internal background scan mechanism for
roaming and BSS selection.

Signed-hostap: Bala Shanmugam <bkamatch@qca.qualcomm.com>
2012-03-30 15:20:35 +03:00
Jouni Malinen
17218a7bab Interworking: Add realm to the anonymous identity from realm
If the username part in the credential does not include a realm,
generate one automatically based on the configured realm information.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-03-30 11:13:25 +03:00
Jouni Malinen
08410f08b9 Interworking: Disconnect before trying interworking reconnection
Make the connection change on Interworking network selection cases
clearer by forcing the previous association to be dropped before trying
to start a new one.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-03-30 11:13:17 +03:00
Jouni Malinen
83df814946 Clear previous BSSID on explicit disconnection request
There is no need to use reassociation instead of association in a case
the previous connection was explicitly disconnected.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-03-30 11:13:00 +03:00
Anirban Sirkhell
4c374cde2f Add wps_cancel for hostapd_cli
Implement wps_cancel for hostapd similarly to how it was already
supported in wpa_supplicant AP mode.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-03-30 11:11:35 +03:00
Jouni Malinen
21d996f775 P2P: Add support for preferred channel list
p2p_pref_chan configuration parameter can now be used to set the
list of preferred channel for P2P GO Negotiation. This will be used
in the priority order if the peer does not support the channel we
are trying to use as the GO (configured operating channel or the
best 2.4 GHz/5 GHz channel) for the case where a forced channel is
not used.

p2p_pref_chan=<op class:channel>,...

For example:
p2p_pref_chan=81:1,81:2,81:3,81:4,81:5,81:6

This would configure 2.4 GHz channels 1-6 as the preferred ones with
channel 1 the most preferred option.

These configuration parameters can be set in wpa_supplicant.conf and
dynamically updated with "wpa_cli set <param> <value>".

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-03-29 21:28:34 +03:00
Jouni Malinen
564865e1d4 Stop sched_scan if requested to run full scan
This allows the ctrl_iface SCAN command to be used to run through a scan
to collect full scan results when sched_scan is in progress. sched_scan
will be re-started automatically after the full scan.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-03-29 21:05:56 +03:00
Vasanthakumar Thiagarajan
07f53b8cc7 wpa_supplicant: Add provision to configure inactivity period in AP mode
This patch adds a configuration in network block, ap_max_inactivity, for
station's inactivity period when in AP mode. The time period is
configured in seconds, by default 300 seconds.

Signed-hostap: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
2012-03-27 20:49:44 +03:00
Jouni Malinen
8c472816fd P2P: Do not use group idle timeout during provisioning
Use the normal group formation timeout during the provisioning phase to
avoid terminating this process too early due to group idle timeout.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-03-27 18:04:06 +03:00
Jouni Malinen
f4329aa2d0 P2P: Validate p2p_oper_channel in p2p_group_add
If the p2p_group_add command does not specify the operating channel,
make sure the operating channel set in the configuration file meets
the P2P requirements in the same way as is done with the frequency
specified as the command parameter.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-03-26 22:06:48 +03:00
Todd Previte
7d39d9c9cc dbus: Make P2P group properties accessible individually
Group properties are now accessible individually. The function to retrieve
the dictionary containing the group properties is removed in favor of the
individual functions. The group member properties are removed as well as
they erroneously retrieved the group properties via the old function.

Signed-hostap: Todd Previte <toddx.a.previte@intel.com>
Signed-hostap: Angie Chinchilla <angie.v.chinchilla@intel.com>
intended-for: hostap-1
2012-03-05 17:25:08 +02:00
Eliad Peller
eb37e085a4 BSS: Fix use-after-realloc
After reallocation of the bss struct, current_bss wasn't updated and
could hold an invalid pointer (which might get dereferenced later).

Update current_bss if the pointer was changed.

Signed-hostap: Eliad Peller <eliad@wizery.com>
intended-for: hostap-1
2012-03-05 17:09:55 +02:00
Grzegorz Bajorski
28ef705d2d P2P: Filter input parameters in p2p_serv_disc_external
p2p_ctrl_serv_disc_external() can take only one parameters "0" or "1".

Signed-hostap: Grzegorz Bajorski <grzegorz.bajorski@tieto.com>
2012-03-05 16:26:19 +02:00
Jouni Malinen
25f839c6d9 Filter station mode EAPOL RX on bridge interface based on destination
If multiple station mode radios are bridged together on the same device,
it is possible for wpa_supplicant to receive EAPOL frames from the
bridge interface and then process them separately for each interface.
This can results in problems since multiple instances of supplicant side
could end up trying to process a single 4-way handshake. Avoid this
problem by filtering bridge interface EAPOL RX based on the desctination
MAC address. It should be noted that this works only when unicast
addresses are used (e.g., with WLAN) and not with the IEEE 802.1X EAPOL
group address (e.g., most wired networks).

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-03-05 15:22:42 +02:00
Jouni Malinen
bb8b1bb0fc Fix memory leak on parsing multiple network block eap entries
Signed-hostap: Jouni Malinen <j@w1.fi>
intended-for: hostap-1
2012-03-04 16:13:00 +02:00
Jouni Malinen
7f41c92bd6 Interworking: Use EAP-AKA if USIM is used
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-03-04 16:11:02 +02:00
Jouni Malinen
d7b01abd5e Interworking: Support real SIM/USIM card for network selection
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-03-04 16:02:56 +02:00
Jouni Malinen
c21246f529 Interworking: Make plmn_id_match() for generic
Use separate mnc_len parameter instead of expecting the imsi parameter
to be in special MCC|MNC|-|<MSIN> format to make this function more
generic.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-03-04 11:27:38 +02:00
Jouni Malinen
817bb3e1c1 Interworking: Fix credential block example
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-03-04 11:24:24 +02:00
Jouni Malinen
400020cbe8 Interworking: Update configuration file documentation for credentials
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-03-03 10:49:02 +02:00
Jouni Malinen
11e4f46a10 Interworking: Add support for certificate credentials (EAP-TLS)
This allows Interworking network selection to be used with EAP-TLS
(client certificate/private key based credential).

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-03-03 10:38:10 +02:00
Jouni Malinen
10531d2166 P2P: Fix provisioning info clearing after successful WPS step
Previously, this provisioning info was cleared using the P2P Interface
Address of the GO as the key. That did not always work in the case the
where we joined an already running group. This could result in the next
connection to that same GO skipping provision discovery. Fix this by
finding the peer entry based on its P2P Device Address instead of the
P2P Interface Address which may not always be set.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
intended-for: hostap-1
2012-03-01 22:06:03 +02:00
Jouni Malinen
6979582ca6 Fix processing of channel list update events
Commit 6bf731e8ce broke handling of
EVENT_CHANNEL_LIST_CHANGED by introducing a cached copy of the driver
channel list that does not get updated even if driver changes its list.
Fix this by synchronizing the cacched wpa_s->hw.modes information
whenever EVENT_CHANNEL_LIST_CHANGED is processed. This fixes P2P channel
list updates based on regulatory domain hints that may trigger driver to
change its supported channel list.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
intended-for: hostap-1
2012-03-01 17:59:39 +02:00
Jouni Malinen
ef48ff940b Fix CTRL-EVENT-DISCONNECTED event for locally generated disconnection
When wpa_supplicant disconnects, e.g., due to authentication timeout,
we need to go through the EVENT_DISASSOC/DEAUTH processing similarly
to the driver triggered cases to get correct events delivered to the
ctrl_iface. Fix this by calling wpa_supplicant_event() in these cases
and by filtering out the confusing CTRL-EVENT-DISCONNECTED event with
all zeros BSSID.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-03-01 15:42:35 +02:00
Jouni Malinen
75c208b9db P2P: Fix p2p_cancel to return success if GO Negotiation is stopped
If a GO Negotiation peer is found, wpas_p2p_stop_find() stops the
negotiation and p2p_cancel can return success.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-03-01 01:16:06 +02:00
Jouni Malinen
85ea132a13 P2P: Use scan optimization for post-provisioning connection
Since P2P GO cannot change the SSID after WPS provisioning step, we
can use the specific SSID for the scan for data connection. In addition,
mark this as p2p_probe to avoid unnecessary use of 802.11b rates.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-02-29 00:34:53 +02:00
Jouni Malinen
8e64f258c6 P2P: Optimize provisioning step scan for join-a-group sequence
Copy the SSID and frequency of the selected group into go_params in
join-a-running-group case so that the scan optimization can be used for
the provisioning step similarly to the case of group formation. This
uses a specific SSID and a single channel scan to avoid unnecessary
frames during the step.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-02-29 00:22:58 +02:00
Jouni Malinen
a21c05db23 P2P: Use specific SSID in scan for provisioning step
Since the P2P client learns the SSID of the group during GO Negotiation,
use the specific SSID in the Probe Request frames during the
provisioning step. This helps in avoiding unnecessary Probe Response
frames from other P2P GOs or APs.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-02-29 00:02:34 +02:00
Jouni Malinen
360182ed7c P2P: Advertise immediate availability of WPS credential
Use Device Password ID in WSC IE of Probe Request and Probe Response
frames to advertise immediate availability of WPS credentials per P2P
specification sections 3.1.2.1.1 (Listen State), 3.1.2.1.2 (Scan Phase),
and 3.1.2.1.3 (Find Phase).

For now, the Device Password ID is set only for the case where we are
active GO Negotiation with a specific peer. In practice, this means that
the Probe Response frames during pending GO Negotiation (whenever in
Listen state) indicate availability of the credential.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-02-27 23:14:35 +02:00
Vivek Natarajan
e62f4ed0df Add support for hidden SSID in wpa_supplicant AP mode
This also disables WPS support if hidden SSID is enabled in AP mode.

Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com>
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-02-27 16:28:45 +02:00
Jouni Malinen
1d4839ee85 Fix CONFIG_AP + CONFIG_INTERWORKING build
Need to include gas_serv.o in the build to get all the needed symbols.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-02-27 16:21:50 +02:00
Jouni Malinen
f64adcd71e Allow PC/SC reader to be selected and initialized at start
New global configuration parameters pcsc_reader and pcsc_pin can now be
used to initialize PC/SC reader context at start of wpa_supplicant.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-02-26 13:09:30 +02:00
Dmitry Shmidt
6e2a570ec4 Android: Build wpa_supplicant.conf from a template
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2012-02-25 18:22:53 +02:00
Dmitry Shmidt
1e1411b04f Android: Add PLATFORM_VERSION to VERSION_STR_POSTFIX definition
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2012-02-25 18:22:38 +02:00
Dmitry Shmidt
5db498920f Android: Add build configuration files
These are from Android wpa_supplicant_8.git initial 0.8.X commit
8d520ff1dc2da35cdca849e982051b86468016d8 with some additional edits and
renaming of .config files to android.config.

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2012-02-25 18:22:34 +02:00
Dmitry Shmidt
e9af53ad39 Add CONFIG_NO_ROAMING option
This can be used to disable wpa_supplicant controlled roaming. It should
be noted that the WPA_DRIVER_FLAGS_BSS_SELECTION capability is the
preferred way for this and CONFIG_NO_ROAMING should be obsoleted once
drivers support the new NL80211_ATTR_ROAM_SUPPORT capability
advertisement.

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2012-02-25 18:22:31 +02:00
Jithu Jance
e60b295186 Add wpa_supplicant AP mode STA deauthenticate/disassociate commands
Move disassociate and deauthenticate commands to ctrl_iface_ap.c, so
that they ares accessible for wpa_supplicant AP mode and wpa_cli (with
CONFIG_AP option enabled).

Signed-hostap: Jithu Jance <jithu@broadcom.com>
2012-02-25 17:22:48 +02:00
Reinette Chatre
93d1749fe0 dbus: return NULL data for peer IEs
The org.freedesktop.DBus.Properties interface is now supported for peer
properties. Ensure that GetAll will work by having the IEs property
function return NULL data instead of a failure until it is implemented.

Signed-hostap: Reinette Chatre <reinette.chatre@intel.com>
intended-for: hostap-1
2012-02-25 10:54:11 +02:00
Reinette Chatre
ca29842700 dbus: revert changes to some peer properties
Commit 3f6e50ac28 made it possible to access
P2P peer properties using the org.freedesktop.DBus.Properties interface.

While maintaining the original intent of that patch we make two changes
to it here:

First, 3f6e50ac28 changed the type used to
represent the WPS vendor extension data from bytes to a string. In
addition to the type change the way in which the vendor extension data
was provided to the function creating the string was incorrect and would
not present the correct vendor extension data even in string format.

Revert the type change made in 3f6e50ac28
and present the WPS vendor extension data as an array of an array of
bytes as it was before.

Second, 3f6e50ac28 changes the secondary
device types representation from an array of an array of bytes to an
array of bytes. Revert that change to make secondary device types
accessible via an array of an array of bytes again.

Signed-hostap: Reinette Chatre <reinette.chatre@intel.com>
intended-for: hostap-1
2012-02-25 10:50:13 +02:00
Jayant Sane
96c4f3a707 dbus: utility to create dbus message from wpabuf array
If a wpabuf array is used to store basic typed data that we would like
to send over D-Bus then this utility will be of help when it places the
data in a variant with format aa? (array of an array of type ?, with ?
indicating any basic type).

Signed-hostap: Jayant Sane <jayant.sane@intel.com>
Signed-hostap: Angie Chinchilla <angie.v.chinchilla@intel.com>
intended-for: hostap-1
2012-02-25 10:45:17 +02:00