Commit graph

58 commits

Author SHA1 Message Date
Naveen Singh
c7fb678f31 D-Bus: Add association response status code property for failure cases
(Re)Association Response frame with status code other than 0 is now
notified over DBUS as a part of PropertiesChanged signal. This can be
used by application in case AP is denying association with status code
17 (band steering) so that it does not interfere in the BSSID selection
logic of wpa_supplicant.

Signed-off-by: Naveen Singh <nasingh@google.com>
2016-03-06 20:44:51 +02:00
Avichal Agarwal
af041f997d dbus: Add support for vendor specific elements
The new methods are
1. VendorElemAdd "i" "ay" i=integer ay=array of bytes
2. VendorElemGet "i" i=integer (output array of bytes)
3. VendorElemRem "i" "ay" i=integer ay=array of bytes

These provide functionality similar to the control interface commands
VENDOR_ELEM_ADD, VENDOR_ELEM_GET, and VENDOR_ELEM_REMOVE.

Signed-off-by: Avichal Agarwal <avichal.a@samsung.com>
Signed-off-by: Purushottam Kushwaha <p.kushwaha@samsung.com>
Signed-off-by: Kyeong-Chae Lim <kcya.lim@samsung.com>
Signed-off-by: Mayank Haarit <mayank.h@samsung.com>
Signed-off-by: Dilshad Ahmad <dilshad.a@samsung.com>
[VendorElemGet to return array of bytes instead of string; cleanup]
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-06 12:50:13 +02:00
Purushottam Kushwaha
2d0fe6bc4e dbus: Add SaveConfig to update configuration file
This is similar to SAVE_CONFIG on control interface, which allow users
to update the configuration file.

Signed-off-by: Purushottam Kushwaha <p.kushwaha@samsung.com>
Signed-off-by: Mayank Haarit <mayank.h@samsung.com>
2015-11-15 19:04:15 +02:00
Dan Williams
e50c50d5a0 dbus: Expose interface globals via D-Bus properties
All interface globals are now exposed as D-Bus properties of type
string, and parsed via the normal interface global parsing functions.

Signed-off-by: Dan Williams <dcbw@redhat.com>
2015-10-28 23:41:32 +02:00
Ningyuan Wang
c143c3b72a D-Bus: Add a dbus handler for expected disconnection
Add a global D-Bus handler ExpectDisconnect for setting
wpa_s->own_disconnect_req flag. This flag will prevent wpa_supplicant
from adding blacklists and requesting incomplete scan upon the incoming
disconnection. This is mainly meant for a case where suspend/resume is
used and some external component knows about that and can provide the
information to wpa_supplicant before the disconnection happens.

Signed-off-by: Ningyuan Wang <nywang@google.com>
2015-10-12 18:03:11 +03:00
Maneesh Jain
be5ab8d4ab D-Bus: Add InvitationReceived Signal
This is equivalent to the P2P_EVENT_INVITATION_RECEIVED signal on the
control interface. It can be used to sent the Invitation Received signal
to applications written using D-Bus.

Signed-off-by: Maneesh Jain <maneesh.jain@samsung.com>
2015-09-27 15:55:11 +03:00
Saurav Babu
893e2cf961 D-Bus: Add signal to notify WPS timeout event
Signed-off-by: Saurav Babu <saurav.babu@samsung.com>
2015-09-27 12:47:47 +03:00
Nishant Chaprana
fd7d3c495e D-BUS: dev_passwd_id should be "q" because it uses DBUS_TYPE_UINT16
This corrects the type of dev_passwd_id in GONegotiationRequest event.
This field is packed as DBUS_TYPE_UINT16 but in
wpas_dbus_interface_signals it was "i" which is DBUS_TYPE_INT32.

Signed-off-by: Nishant Chaprana <n.chaprana@samsung.com>
2015-09-25 20:54:11 +03:00
Nishant Chaprana
2a95fac944 P2P: Add D-Bus signal GroupFormationFailure
This is similar to the control interface event
P2P-GROUP-FORMATION-FAILURE.

Signed-off-by: Nishant Chaprana <n.chaprana@samsung.com>
2015-09-05 23:01:20 +03:00
Purushottam Kushwaha
4e7175827e dbus: Add RemoveClient method to remove a client from local GO
This is equivalent to the P2P_REMOVE_CLIENT command on control
interface. This can be used to remove the specified client [as object
path or string format interface address] from all groups (operating and
persistent) from the local GO.

Argument(s): peer[object path] OR iface[string format MAC address]

Signed-off-by: Purushottam Kushwaha <p.kushwaha@samsung.com>
Signed-off-by: Jijo Jacob <jijo.jacob@samsung.com>
2015-06-19 12:55:54 +03:00
MAYANK HAARIT
b649c0afd4 dbus: Add Reconnect command to D-Bus Interface
This has same behavior as the ctrl_iface RECONNECT command.

Signed-off-by: Mayank Haarit <mayank.h@samsung.com>
Signed-off-by: Purushottam Kushwaha <p.kushwaha@samsung.com>
2015-06-14 11:33:54 +03:00
MAYANK HAARIT
f4a234a169 doc: Update D-Bus GONegotiationRequest Signal: add device_go_intent
This new parameter was added by commit
aa2b12562b ('P2P: Add GO Intent of
connecting device in GO Negotiation Request event').

Signed-off-by: Rahul Jain <rahul.jain@samsung.com>
Signed-off-by: Mayank Haarit <mayank.h@samsung.com>
2015-06-14 11:25:26 +03:00
Avichal Agarwal
1a2f7ca1b8 D-Bus: Add WPS pbc-overlap Event
This sends an Event D-Bus signal with name "pbc-overlap" for
WPS-EVENT-OVERLAP.

Signed-off-by: Avichal Agarwal <avichal.a@samsung.com>
2015-06-10 20:51:30 +03:00
Amit Khatri
4f369652da P2P: Add ModelNumber and SerialNumber info into D-Bus peer interface
Signed-off-by: Amit Khatri <amit.khatri@samsung.com>
Signed-off-by: Rahul Jain <rahul.jain@samsung.com>
2015-06-10 19:11:12 +03:00
Amit Khatri
2899cba622 P2P: Add ModelName info into D-Bus peer interface
Signed-off-by: Amit Khatri <amit.khatri@samsung.com>
Signed-off-by: Rahul Jain <rahul.jain@samsung.com>
2015-06-10 19:06:54 +03:00
Amit Khatri
8bb5cfe41a doc: Add missing ListenChannel to P2P information
Signed-off-by: Amit Khatri <amit.khatri@samsung.com>
Signed-off-by: Rahul Jain <rahul.jain@samsung.com>
2015-06-10 19:02:48 +03:00
Amit Khatri
cf60962627 doc: Fix a typo in D-Bus API document
Signed-off-by: Amit Khatri <amit.khatri@samsung.com>
Signed-off-by: Rahul Jain <rahul.jain@samsung.com>
2015-06-06 17:26:15 +03:00
Amit Khatri
dc1a341dec P2P: Add manufacturer info into D-Bus peer interface
Allow the Manufacturer information for a found P2P peer device to be
fetched through the D-Bus interface similarly to p2p_peer <mac address>
on ctrl interface.

Signed-off-by: Amit Khatri <amit.khatri@samsung.com>
Signed-off-by: Rahul Jain <rahul.jain@samsung.com>
Signed-off-by: Ashutosh Kaushik <k.ashutosh@samsung.com>
2015-05-29 21:28:26 +03:00
Nishant Chaprana
333039596e P2P: Add P2P Cancel method over D-Bus interface
This patch adds P2P Cancel method over
fi.w1.wpa_supplicant1.Interface.P2PDevice dbus interface.

Signed-off-by: Nishant Chaprana <n.chaprana@samsung.com>
2015-05-29 21:05:17 +03:00
Nishant Chaprana
87d3c62835 WPS: Add WPS Cancel method over D-Bus interface
Signed-off-by: Nishant Chaprana <n.chaprana@samsung.com>
2015-05-29 20:55:08 +03:00
Nishant Chaprana
7b642dc80b P2P: Add D-Bus FindStopped to notify P2P-FIND-STOPPED event
Add D-Bus notification mechanism of P2P-FIND-STOPPED event on
fi.w1.wpa_supplicant1.Interface.P2PDevice interface.

Signed-off-by: Nishant Chaprana <n.chaprana@samsung.com>
2015-05-25 18:31:09 +03:00
Jouni Malinen
d07d3fbda2 Add peer certificate alt subject name information to EAP events
A new "CTRL-EVENT-EAP-PEER-ALT depth=<i> <alt name>" event is now used
to provide information about server certificate chain alternative
subject names for upper layers, e.g., to make it easier to configure
constraints on the server certificate. For example:
CTRL-EVENT-EAP-PEER-ALT depth=0 DNS:server.example.com

Currently, this includes DNS, EMAIL, and URI components from the
certificates. Similar information is priovided to D-Bus Certification
signal in the new altsubject argument which is a string array of these
items.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-14 15:45:18 +02:00
Jouni Malinen
5eb513c3ba doc: Disable Doxygen autolink support
The way autolink support is implementing in Doxygen is a bit
inconvenient with wpa_supplicant being recognized as something that
would always be linked to struct wpa_supplicant. In addition, number of
links were not really noticed automatically. To get this working more
robustly and without having to use the %wpa_supplicant workaround (which
had its own issues, e.g., with titles), disable autolinking and use
explicit \ref commands instead.

This is also updating some of the obsolete notes to point to correct
file names, etc. changes in the source code tree.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-03 15:44:35 +02:00
Jouni Malinen
fa0d99c4b2 doc: Document the D-Bus P2P extensions
P2P support was added to the wpa_supplicant D-Bus interface long time
ago, but there has been no attempt of documenting that interface so far.
This commit adds at least a list of new interfaces, methods, properties,
and signals. Some of the incorrect and/or strange parts of the interface
are also identified with bug/todo comments.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-02 22:50:27 +02:00
Jouni Malinen
2750d27ebc doc: Document D-Bus WPS property ConfigMethods
This was added a long time ago, but documentation update was forgotten.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-02 22:50:27 +02:00
Jouni Malinen
fd5768b620 doc: Document missing D-Bus Interface properties
CurrentAuthMode and DisconnectReason have been added a long time ago,
but documentation update was forgotten.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-02 22:50:27 +02:00
Jouni Malinen
6c45094c0c doc: Document D-Bus BSS properties WPS and Age
These have been added a long time ago, but documentation update was
forgotten.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-02 22:50:27 +02:00
Jouni Malinen
9f972b45ca doc: Add D-Bus documentation for Probe Request reporting
Commit 2d43d37ff2 ('DBus: Add ability to
report probe requests') added this capability, but forgot to document
it.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-02 22:50:27 +02:00
Jouni Malinen
24a97d6ff2 doc: Fix D-Bus documentation for .Network Properties
This propertry is not read-only, i.e., it can also be used to change
configuration parameters for an existing network.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-02 22:50:27 +02:00
Jouni Malinen
c35d7923b6 doc: Add D-Bus signals Certification(), EAP(), NetworkRequest()
This documents number of EAP related D-Bus signals and the related
NetworkResponse() method.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-29 15:49:06 +02:00
Jouni Malinen
ea53bebf47 doc: Add D-Bus FlushBSS() method
Commit 2b65b30da8 ('dbus: Add D-Bus
methods to flush the BSS cache') added this, but forgot to update
documentation.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-29 15:49:06 +02:00
Jouni Malinen
624b1478be doc: Add D-Bus RemoveAllNetworks() method
Commit 7c49fdd0bd ('dbus: Add
RemoveAllNetworks to the new D-Bus API') added this, but forgot to
document it.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-29 15:49:06 +02:00
Jouni Malinen
f60cc31334 doc: Add D-Bus Reattach() method
Commit 0f44ec8eba ('Add a reattach command
for fast reassociate-back-to-same-BSS') added Reattach(), but forgot to
document it.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-29 15:49:06 +02:00
Jouni Malinen
a46652fe22 doc: Add D-Bus SignalPoll() method
Commit 7a4a93b959 ('dbus: Add SignalPoll()
method to report current signal properties') added this method, but
forgot to document it.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-29 15:49:06 +02:00
Jouni Malinen
acf0cfde0e doc: Add D-Bus global Capabilities property
This property was added to the fi.w1.wpa_supplicant1 interface in commit
1634ac0654 ('dbus: Add global capabilities
property'), but documentation was not updated.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-29 15:49:06 +02:00
Jouni Malinen
545d282df0 doc: Fix D-Bus documentation for CreateInterface()
The "Bridge_ifname" parameter had been renamed to "BridgeIfname" and
"ConfigFile" is also available as a parameter.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-29 15:49:05 +02:00
Jouni Malinen
9a15420a63 doc: Fix D-Bus page format with newer Doxygen versions
It looks like the space indentation before the HTML command ended up
being converted to HTML tags getting shown as code text rather than
being used to control formatting. Fix this by removing indentation from
the first line of each HTML segment.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-29 15:49:05 +02:00
Fionn Cleary
efd11c02ca Add reassociate command to dbus doxygen
Signed-off-by: Fionn Cleary <fionn.cleary@streamunlimited.com>
2014-04-11 19:22:00 +03:00
Michael Schaller
bdec7ee5c9 D-Bus: Add support to set pkcs11_{engine,module}_path
Add SetPKCS11EngineAndModulePath D-Bus method. Add PKCS11EnginePath
and PKCS11ModulePath D-Bus property getters.

Signed-hostap: Michael Schaller <misch@google.com>
2013-11-23 10:48:27 +02:00
Paul Stewart
ca9c14fb0a dbus_new: Add documentation for D-Bus TDLS methods
Signed-hostap: Paul Stewart <pstew@chromium.org>
2013-11-20 16:39:34 +02:00
Dan Williams
c23eea8867 doc: Update D-Bus docs for Scan()'s new AllowRoam option
Signed-hostap: Dan Williams <dcbw@redhat.com>
2013-10-23 00:44:23 +03:00
Chengyi Zhao
8a901d750b D-Bus: Emit signal when a station is authorized or deauthorized
Add "StaAuthorized" and "StaDeauthorized" D-Bus interface in AP mode.
After enabling the AP mode of wpa_supplicant, the other process need to
get the MAC address and authorization status of every station, so
wpa_supplicant emits signal when the station is authorized or
deauthorized.

Signed-hostap: Chengyi Zhao <chengyix.zhao@gmail.com>
2013-06-22 12:09:09 +03:00
Paul Stewart
754632c965 dbus_new: Add EAP logon/logoff
Add "EAPLogoff" and "EAPLogon" interface DBus commands which
parallel the "logoff" and "logon" wpa_ctrl commands which terminate
and restart EAP authentication.  Slightly enhance the "logon" case
by expiring any running "startWhile" timer.

Signed-hostap: Paul Stewart <pstew@chromium.org>
2013-04-23 17:57:55 +03:00
Tomasz Bursztyka
67892d5c0d D-Bus: Add AutoScan interface method to set/unset autoscan parameters
Signed-hostap: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2012-06-26 19:05:09 +03:00
Mukesh Agrawal
c6e86b63d2 Create DBus getter/setter for ScanInterval
Enable control of wpa_s->scan_interval via D-Bus. This parameter
controls the delay between successive scans for a suitable AP.

Also, update dbus.doxygen with ScanInterval, and some other
parameters that were undocumented.

Signed-hostap: Mukesh Agrawal <quiche@chromium.org>
2012-04-01 18:05:22 +03:00
Witold Sowa
c56ce48a6f dbus: Add new KeyMgmt interface capabilities
Add "wpa-ft-psk", "wpa-psk-sha256", "wpa-ft-eap" and "wpa-eap-sha256"
possible KeyMgmt values of interface capabilities to fit values in
BSS RSN options dictionary.
2010-04-11 21:37:28 +03:00
Witold Sowa
7899e2f42d dbus: Change WPA/RSNIE byte array props to dicts
Expose RSN and WPA properties for BSS objects containing information
about key management and cipher suites. Get rid of WPA/RSN/WPSIE
byte array properties and add IEs byte array property with all IE data
instead.
2010-01-16 16:37:37 +02:00
Witold Sowa
8e5568f874 dbus: Change BSS, Network and some errors interface names
Remove ".Interface" part from BSS and Network objects and some
error names.
2010-01-09 11:41:09 +02:00
Jouni Malinen
1269489564 dbus: Document BSS PropertiesChanged signal 2010-01-06 20:06:11 +02:00
Witold Sowa
75d328af50 dbus: Change BSS property MaxRate to Rates
Instead of exposing maximum BSS bit rate, expose sorted array
of all supported rates.
2010-01-04 16:52:30 +02:00