Commit graph

290 commits

Author SHA1 Message Date
Jouni Malinen
5abf8ad9b2 tests: DPP enterprise provisioning
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-16 18:26:09 +03:00
Jouni Malinen
5ee94a997e tests: Replace sae_pk_only with sae_pk to match implementation
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-07 11:55:16 +03:00
Jouni Malinen
4ea4df529d tests: SAE-PK only
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-06 15:18:13 +03:00
Jouni Malinen
b96a4fa996 tests: Report unknown WpaSupplicant::connect() arguments
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-06 11:48:09 +03:00
Jouni Malinen
1d4a1a819a tests: sigma_dut DPP chirping
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-04 15:33:03 +03:00
Jouni Malinen
e96d319140 tests: DPP PFS
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-03-28 17:27:42 +02:00
Jouni Malinen
f1732b4d1a tests: DPP chirping
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-03-27 20:05:25 +02:00
Jouni Malinen
2b8f8a4721 tests: FT protocol RSNE/RSNXE mismatch in Reassociation Response frame
Signed-off-by: Jouni Malinen <j@w1.fi>
2020-03-15 10:39:17 +02:00
Jouni Malinen
8b077a42e5 tests: wpa_supplicant config file writing with SAE
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-03-02 11:51:38 +02:00
Jouni Malinen
fd1892885b tests: SAE and opportunistic key caching and PMK lifetime
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-02-28 18:41:24 +02:00
Alexander Wetzel
5742d12d4a tests: Allow PTK0 rekey for tests
Verify PTK0 rekey blocking is working as intended.

Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
2020-02-23 13:11:02 +02:00
Jouni Malinen
f65da0ca4b tests: Beacon protection
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-02-21 19:41:36 +02:00
Thomas Pedersen
1d9d6c2432 tests: Factor out multicast connectivity check
A test may want to check multicast connectivity independent of unicast
or check multicast without exercising unicast first. Factor out the
multicast connectivity check code into its own function.

Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
2020-02-15 18:36:29 +02:00
Jouni Malinen
d299756e3e tests: DPP QR Code and enrollee initiating with netrole specified
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-02-11 06:43:02 +02:00
Jouni Malinen
6478f4375b tests: GET_PMK and PMKSA_GET match
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-02-10 02:56:40 +02:00
Jouni Malinen
5bf51d38b0 tests: Fix DPP capability checking to avoid failures in non-DPP build
"finally" handler should not trigger a new exception when trying to
clear state for non-DPP builds. In addition, couple of checks for DPP
capability in the build were missing.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-01-26 13:40:56 +02:00
Jouni Malinen
f28853fbc4 tests: OWE PTK derivation workarounds
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-24 00:47:41 +02:00
Jouni Malinen
447ce4813a tests: Opportunistic Wireless Encryption transition mode disabled on STA
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-10 20:37:41 +02:00
Jouni Malinen
4a667b01e6 tests: DPP bootstrapping via NFC URI record
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-05 12:37:51 +02:00
Jouni Malinen
ca6a2ac705 tests: DPP ssid_charset/ssid64
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-11-28 16:39:09 +02:00
Jouni Malinen
b256d9393d tests: DPP2 connection status result
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-09-16 17:25:34 +03:00
Jouni Malinen
70990138ec tests: EAP-TEAP with inner EAP-MSCHAPv2 user and EAP-TLS machine credentials
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-09-01 17:19:43 +03:00
Jouni Malinen
4619dc0607 tests: EAP-TEAP with machine username/password credential
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-08-20 13:24:14 +03:00
Jouni Malinen
d1fb06c947 tests: Check wait_event argument type
It was clearly too easy to get unexpected behavior by accidentially
passing in a string instead of a list of strings to these functions, so
enforce the correct type to notice such issues automatically.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-08-07 12:57:22 +03:00
Jouni Malinen
9ff2b85e73 tests: FT-EAP and PMKSA caching for initial mobility domain association
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-28 16:07:22 +03:00
Jouni Malinen
5fbefcc64b tests: DPP over TCP using Controller/Relay
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-22 21:08:59 +03:00
Jouni Malinen
6541b9dbe7 tests: Avoid confusing "DETACH failed" exception prints in D-Bus tests
dbus_p2p_go_neg_init, dbus_p2p_group_idle_timeout, and
dbus_p2p_group_termination_by_go could end up print a "DETACH failed"
exception as a warning from WpaSupplicant.__del__ for the dev1 instance
used within the TestDbusP2p class. This did not cause the test cases to
fail, but the output is a bit confusing, so clean this up be explicitly
closing the control interface monitor sockets and furthermore by
ignoring the "DETACH failed" exception within __del__.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-15 20:13:28 +03:00
Jouni Malinen
e105110f40 tests: Use a helper function for DPP_CONFIGURATOR_ADD/REMOVE
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-03-18 18:32:31 +02:00
Jouni Malinen
5725b3e355 tests: Use a helper function for DPP_AUTH_INIT
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-03-18 18:32:31 +02:00
Jouni Malinen
6d196e5928 tests: Helper functions for DPP PKEX initiator and responder
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-03-17 20:57:58 +02:00
Jouni Malinen
7e0091007c tests: Use helper function for DPP_LISTEN commands
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-03-17 18:19:58 +02:00
Jouni Malinen
e01a492caa tests: Helper function for DISCONNECT + ABORT_SCAN + wait
Use a helper function to perform this common sequence to disconnect and
stop any possibly started reconnection attempt.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-03-17 17:58:33 +02:00
Jouni Malinen
3a88b7e6e9 tests: Split event wait in grpform_cred_ready_timeout
The long wait for the monitor socket events resulted in another socket
running out of TX buffer space. Split the wait into smaller segments and
clear the other socket in each iteration.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-03-17 16:08:53 +02:00
Jouni Malinen
b21540e682 tests: Close wpa_supplicant control interface more robustly
Some of the test cases left behind attached control interface monitor
sockets that could result in hitting the wpa_supplicant socket TX queue
limit. Try to be a bit more careful about detaching and closing the
sockets to avoid this.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-03-17 16:08:30 +02:00
Jouni Malinen
4d916a7f3e tests: Fix dump_monitor() without monitor attached
Do not try to dump pending event messages if the monitor socket has not
been attached.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-03-17 12:22:23 +02:00
Jouni Malinen
fab49f6145 tests: Python coding style cleanup (pylint3 bad-whitespace)
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-03-16 18:52:09 +02:00
Jouni Malinen
043a29ecc4 tests: Clear pending monitor events before starting scan
The wait_event() call for scan completion could have processed a
previously received event from a prior scan instead of the newly started
one. This could result in flush_scan_cache() assuming there are still
results in the cache even though the scan request to clear the cache had
not even be started yet.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-03-15 13:51:55 +02:00
Jouni Malinen
a8b8da1132 tests: Python coding style cleanup (pylint3 unneeded-not)
Use more readable "foo not in bar" construction for the couple of places
that did "not foo in bar".

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-03-15 11:34:32 +02:00
Jouni Malinen
64766a7783 tests: Make TDLS test case scan clearing more robust
There was a race condition on starting the flush_scan_cache() operations
if a scan happened to be in progress when the test case ended since the
ABORT_SCAN success case did not wait for the pending scan operation to
be completed. Wait for the scan completion event in addition to the
disconnection event if the ABORT_SCAN command is accepted.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-03-13 23:33:21 +02:00
Jouni Malinen
f4f17e9aa1 tests: check_cert_subject
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-03-11 14:09:45 +02:00
Jouni Malinen
a5387062e5 tests: Use a helper function for DPP_BOOTSTRAP_GEN commands
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-03-09 18:13:10 +02:00
Jouni Malinen
0422d06b54 tests: Use a helper function for DPP_QR_CODE commands
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-03-09 16:55:54 +02:00
Masashi Honma
54c58f29c0 tests: Replace str.encode('hex') with binascii.hexlify() for python3
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-04 12:26:34 +02:00
Jouni Malinen
45b0b88f80 tests: Decode command execution output to a str for python3
Need to convert from bytes to str to allow the following string
operations to work with python3.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-02 12:51:13 +02:00
Johannes Berg
a2674fd902 tests: wpasupplicant: Refactor code duplication in wait_global_event()
This code is identical to the wait_event() code, except for the
mon/global_mon instance. Create a _wait_event() function that
encapsulates this, and use it for both.

While at it, fix the bug in wait_global_event() where in the case
of not having a global_mon it always returns None.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-01 23:02:43 +02:00
Masashi Honma
35d8c2545e tests: Use python3 compatible dict operation
This patch is made by using 2to3 command.

$ find . -name *.py | xargs 2to3 -f dict -w -n

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2019-01-26 12:53:05 +02:00
Masashi Honma
89896c0008 tests: Use python3 compatible print statement
This patch is made by using 2to3 command.

$ find . -name *.py | xargs 2to3 -f print -w -n

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2019-01-26 12:37:25 +02:00
Masashi Honma
bab493b904 tests: Use python3 compatible "except" statement
This patch is made by using 2to3 command.

$ find . -name *.py | xargs 2to3 -f except -w -n

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2019-01-26 12:11:35 +02:00
Jouni Malinen
63a7683b2d tests: Split ap_ft_oom into separate test cases
ap_ft_oom seemed to depend on undesired wpa_supplicant behavior of
trying to do FT protocol even without being ready for reassociation.
This is going to be fixed in wpa_supplicant which would make this test
case fail, so split it into separate test cases for each failure item to
be able to avoid incorrect test failures.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-01-04 23:22:04 +02:00
Jouni Malinen
04e17e5024 tests: Verify that roaming attempts do not get rejected
The previous roam() and roam_over_ds() checks would have ignored failing
association rejection if a consecutive attempt to connect succeeds
within the initial time limit. This can miss incorrect behavior, so
check explicitly for association rejection.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-01-04 20:27:40 +02:00