Commit graph

88 commits

Author SHA1 Message Date
Jouni Malinen
7b82d0bd58 tests: Skip test cases where hostapd does not support TKIP
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-04-17 23:51:58 +03:00
Jouni Malinen
af9d8c758d tests: Use proper temp files for dynamically created config
Replace the hardcoded /tmp filenames for generated ACL and BSS
configuration files with proper temporary files from tempfile.mkstemp()
to avoid conflicts with existing files or with parallel uses. Remove ACL
files from the local directory at the end of each test case. BSS files
are currently left behind, but can be cleaned up separately if needed
for non-VM testing (VM testing has those on ramdrive so they get dropped
automatically at the end) and for remote devices.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-02-23 18:20:50 +02:00
Jouni Malinen
92f08a3ccd tests: Generate BSS config files in ap_bss_add_remove_during_ht_scan
Signed-off-by: Jouni Malinen <j@w1.fi>
2020-02-23 17:52:53 +02:00
Janusz Dziedzic
ba1ff57ad2 tests: remote: Generate and send BSS configuration files
Instead of hardcoded bss-[1-6]*.conf files, generate them using the
correct BSSID for each AP device and send/install them on the remote
client as well if needed.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@gmail.com>
2020-02-23 17:50:44 +02:00
Janusz Dziedzic
4d14838421 tests: Generate ACL files
Generate ACL files instead of using files with hardcoded values for the
STA MAC addresses. Send the generated files also to the remote client if
required.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@gmail.com>
2020-02-23 16:38:23 +02:00
Janusz Dziedzic
16f18b2ca7 tests: remotehost: Add send_file()
Some hostapd test cases use configuration files, e.g., ACLs in BSS
configuration. When executing remote tests (udp), we have to first send
these configuration files to the appropriate remote device. The new
send_file() helper can be used for that.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@gmail.com>
2020-02-23 15:48:46 +02:00
Alexander Wetzel
5742d12d4a tests: Allow PTK0 rekey for tests
Verify PTK0 rekey blocking is working as intended.

Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
2020-02-23 13:11:02 +02:00
Thomas Pedersen
1d9d6c2432 tests: Factor out multicast connectivity check
A test may want to check multicast connectivity independent of unicast
or check multicast without exercising unicast first. Factor out the
multicast connectivity check code into its own function.

Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
2020-02-15 18:36:29 +02:00
Markus Theil
7a42316374 tests: Fix Python sleep function
Current Python versions have no os.sleep(), use time.sleep() instead.

module 'os' has no attribute 'sleep'
Traceback (most recent call last):
  File "./run-tests.py", line 521, in main
    t(dev, apdev)
  File "/home/mtheil/hostap/tests/hwsim/test_pmksa_cache.py", line 356, in test_pmksa_cache_expiration
    hapd.wait_ptkinitdone(dev[0].own_addr())
  File "/home/mtheil/hostap/tests/hwsim/hostapd.py", line 282, in wait_ptkinitdone
    os.sleep(0.1)

Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
2020-01-09 11:55:53 +02:00
Jouni Malinen
e9aa399522 tests: PMF tests with not-protected disconnection using hostapd
Signed-off-by: Jouni Malinen <j@w1.fi>
2020-01-04 20:41:52 +02:00
Jouni Malinen
0075df74df tests: Make pmksa_cache_expiration more robust
Wait for hostapd to enter the PTKINITDONE state before checking
connectivity. This is needed to avoid a race condition with UML
time-travel.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-12-27 16:03:50 +02:00
Jouni Malinen
d1fb06c947 tests: Check wait_event argument type
It was clearly too easy to get unexpected behavior by accidentially
passing in a string instead of a list of strings to these functions, so
enforce the correct type to notice such issues automatically.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-08-07 12:57:22 +03:00
Jouni Malinen
c4a9610e8f tests: Fix hostapd.wait_sta()
wait_event() expects a list of events instead of a single event name.
The previous implementation of wait_sta() did not really wait for
AP-STA-CONNECT; instead, it returned the next event from hostapd
regardless of what that event was.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-08-07 12:36:36 +03:00
Jouni Malinen
938c6e7b3d tests: Wait for AP-STA-CONNECT before running connectivity test
When going through 4-way handshake, the station side reports
CTRL-EVENT-CONNECTED after having sent out EAPOL-Key msg 4/4. The AP
side reports AP-STA-CONNECT after having completed processing of this
frame. Especially when using UML with time travel, it is possible for
the connectivity test to be started before the AP side has configured
the pairwise TK if the test is triggered based on CTRL-EVENT-CONNECTED
instead of AP-STA-CONNECT.

Add explicit wait for AP-STA-CONNECT in some of these cases to reduce
likelihood of reporting failures for test cases that are actually
behaving as expected. This shows up with "dev1->dev2 unicast data
delivery failed" in the test log.

Do the same before requesting reauthentication from the station side
since that has a similar issue with the EAPOL-Start frame getting
encrypted before the AP is ready for it.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-08-05 00:10:32 +03:00
Jouni Malinen
e374def207 tests: Start ERP authentication server without AP
There is no actual need for running the authentication server with
driver=nl80211, so simplify this by using driver=none instead. This
frees up apdev[1] for actual AP needs in the test cases.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-05-06 23:36:30 +03:00
Jouni Malinen
431802df00 tests: EAP-PSK server local errors and protocol testing
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-04-20 00:27:15 +03:00
Jouni Malinen
e105110f40 tests: Use a helper function for DPP_CONFIGURATOR_ADD/REMOVE
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-03-18 18:32:31 +02:00
Jouni Malinen
5725b3e355 tests: Use a helper function for DPP_AUTH_INIT
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-03-18 18:32:31 +02:00
Jouni Malinen
6d196e5928 tests: Helper functions for DPP PKEX initiator and responder
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-03-17 20:57:58 +02:00
Jouni Malinen
7e0091007c tests: Use helper function for DPP_LISTEN commands
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-03-17 18:19:58 +02:00
Jouni Malinen
fab49f6145 tests: Python coding style cleanup (pylint3 bad-whitespace)
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-03-16 18:52:09 +02:00
Jouni Malinen
a8b8da1132 tests: Python coding style cleanup (pylint3 unneeded-not)
Use more readable "foo not in bar" construction for the couple of places
that did "not foo in bar".

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-03-15 11:34:32 +02:00
Jouni Malinen
a5387062e5 tests: Use a helper function for DPP_BOOTSTRAP_GEN commands
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-03-09 18:13:10 +02:00
Jouni Malinen
0422d06b54 tests: Use a helper function for DPP_QR_CODE commands
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-03-09 16:55:54 +02:00
Masashi Honma
7ab74770e7 tests: Convert binascii.hexlify() output to a string object for python3
This is needed in cases the hexlify() output is used to concatenate with
a string or used in string comparisons.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-04 12:26:33 +02:00
Jouni Malinen
45b0b88f80 tests: Decode command execution output to a str for python3
Need to convert from bytes to str to allow the following string
operations to work with python3.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-02 12:51:13 +02:00
Masashi Honma
35d8c2545e tests: Use python3 compatible dict operation
This patch is made by using 2to3 command.

$ find . -name *.py | xargs 2to3 -f dict -w -n

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2019-01-26 12:53:05 +02:00
Jouni Malinen
02a4ac0feb tests: WPA2-PSK-FT AP over DS and separate hostapd process
This is a regression test case for FT-over-DS that got broken on
mac80211-based drivers when the extra key reinstallation checks were
added.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-01-04 23:22:46 +02:00
Jouni Malinen
0851a180b9 tests: Verify hostapd mgmt_tx() success
Raise an exception if MGMT_TX command to hostapd fails. Previously, such
errors were ignored silently.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-12-18 13:01:49 +02:00
Jouni Malinen
e9f2d54f44 tests: Use shell in local cmd_execute() only if needed
The generic cmd_execute() function was introduced in a manner that
converted the argument array to a string and used shell to run the
command unconditionally. This is not really desirable, so move back to
using the command array by default and use the single command string
with a shell only when really needed.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-27 21:10:35 +03:00
Jonathan Afek
7fd9fbc27d tests: Add functions to execute shell commands on interface host
Add the feature to execute shell commands on each wpa_supplicant/hostapd
interface host. When executing remote tests the interfaces are not all
on a single host so when executing shell commands the test needs to
execute the command on the host which the interface relevant for the
command is on. This patch enables tests to execute the command on the
relevant host.

Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
2016-06-19 23:48:07 +03:00
Jonathan Afek
e2f3f0232f tests: Use 10 retries for over-the-air broadcast connectivity
The regular hwsim tests use both unicast and broadcast frames to test
the connectivity between 2 interfaces. For real hardware (remote hwsim
tests) the broadcast frames will sometimes not be seen by all connected
stations since they can be in low power mode during DTIM or because
broadcast frames are not ACKed. Use 10 retries for broadcast
connectivity tests for real hardware so that the test will pass if we
successfully received at least one of them.

Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
2016-05-28 16:33:41 +03:00
Janusz Dziedzic
fb1a7dccbf tests: Return hapd when add_bss() and add_iface() are used
Return hapd from add_bss() and add_iface() while we can next use it.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-04-24 16:18:50 +03:00
Janusz Dziedzic
625bf74436 tests: Pass apdev param to HostapdGlobal()
Pass apdev param to HostapdGlobal() to support operating with a remote
test host.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-04-24 16:18:49 +03:00
Janusz Dziedzic
9cd6f4c015 tests: Pass apdev to hostapd.add_bss()
Pass apdev param to hostapd.add_bss(). Kill hardcoded phy param and get
phy base on apdev. These are needed to support operation with a remote
test host.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-04-24 16:18:46 +03:00
Janusz Dziedzic
29444a0863 tests: Pass apdev to hostapd.add_iface()
Pass apdev param to hostapd.add_iface() to support operation with a
remote test host.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-04-24 11:58:55 +03:00
Janusz Dziedzic
369f712a40 tests: Pass apdev to hostapd.terminate()
Pass apdev dictionary to hostapd.terminate() to support operation with a
remote test host.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-04-24 11:51:06 +03:00
Janusz Dziedzic
c92ee957ca tests: Pass apdev to remove_bss()
We need this for remote host support. From apdev we can get
apdev['hostname'] and apdev['port'].

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-04-24 11:47:03 +03:00
Janusz Dziedzic
78b8319317 tests: Allow full apdev to be passed to add_ap() function
This allows the full apdev dict to be passed to the add_ap() function
instead of just ifname. This allows us to handle also remote hosts while
we can check apdev['hostname'], apdev['port']. The old style ifname
argument is still accepted to avoid having to convert all callers in a
single commit.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-04-03 22:32:26 +03:00
Janusz Dziedzic
d4944fad72 tests: Improve debug logs in hostapd/wpasupplicant with remote commands
Show more info when we are using remote wpaspy and UDP-based control
interface.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-03-20 21:49:35 +02:00
Janusz Dziedzic
8ce4855b23 tests: hostapd.py/wpasupplicant.py use Host when executing commands
Execute commands using the Host class. This enables use of remote hosts
as well.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-03-20 21:49:26 +02:00
Jouni Malinen
865fa1e9ea tests: PMKSA cache control interface operations
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-03-20 18:06:03 +02:00
Janusz Dziedzic
c0ca24fc30 tests: Add hostapd.py helpers for various radio parameters
Add support for generating hostapd parameters for
b_only/g_only/a_only/HT20/HT40/VHT80.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-03-05 17:44:51 +02:00
Janusz Dziedzic
e3b36d420e tests: Add terminate support for hostapd/wpa_supplicant
Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-03-05 17:44:51 +02:00
Janusz Dziedzic
4d48d44ca2 tests: Add HostapdGlobal.get_ctrl_iface_port()
This adds a method to get the UDP port for an interface.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-03-05 17:44:51 +02:00
Janusz Dziedzic
cb73f7e84d tests: Add UDP ctrl_iface support to hostapd.py
Allow use of a remote host using wpaspy.Ctrl with UDP ctrl_iface
support.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-03-05 17:44:51 +02:00
Jouni Malinen
57ff37d0e8 tests: Speed up hostapd_oom_loop tests
At some point, these hostapd_oom_* test cases started to fail with
wpa_msg() allocation failure for the AP-ENABLED event. This resulted in
unnecessary long test execution (waiting 30 seconds for an event that
was dropped). Speed this up by using a shorter timeout.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-04 18:52:38 +03:00
Jouni Malinen
087632168b tests: Add hostapd interface with driver specified
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-17 23:57:04 +03:00
Anton Nayshtut
6f7b96145f tests: hostapd global-to-local control interface redirection
This implements basic global-to-local control interface command
redirection tests.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 20:23:26 +03:00
Anton Nayshtut
41a256ecd9 tests: Add FST module tests
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 18:26:16 +03:00