Commit graph

77 commits

Author SHA1 Message Date
Markus Theil
89ad24379d mesh: Move mesh frequency setting to its own function
Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
2020-12-01 00:44:38 +02:00
Markus Theil
7c2cad969a mesh: Fix DFS deinit/init
The hostapd DFS code deinitializes and initializes the AP interface, if
a clean channel switch is not possible. In this case the AP code paths
would deinit the driver, for example nl80211, without wpa_supplicant
code paths getting notice of this.

Therefore add callbacks for wpa_supplicant mesh methods, which are
called on init/deinit of the AP BSS. These callbacks are then used to
handle the reset in the mesh code.

Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
2020-12-01 00:31:56 +02:00
Markus Theil
0896c442dc mesh: Fix for mesh init/deinit
Send mesh group started notification after join completion
callback is called.

Implement outstanding TODO, to leave the mesh network on deinit.

Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
2020-12-01 00:23:15 +02:00
Markus Theil
06161d4f10 mesh: Fix mesh_oom test
Only change freq params, if ifmsh->freq is set initially, which only
happens if hostapd_get_hw_features in setup_interface2 succeeds.

Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
2020-12-01 00:22:59 +02:00
Peter Oh
12ae3e3dba mesh: Inform kernel driver about DFS handler in userspace
The kernel requires indication of DFS handler residing in user space
(NL80211_ATTR_HANDLE_DFS) to enable DFS channels.

Signed-off-by: Peter Oh <peter.oh@bowerswilkins.com>
2020-12-01 00:14:07 +02:00
Peter Oh
a27faf2c9a mesh: Fix channel switch error during CAC
Mesh interface would have used its channel parameters that were
configured during initialization even after channel switch due to DFS
radar detection during CAC which could result in a channel switch error.
Fix the error by updating the channel parameters when channel has been
changed from the initial one.

Signed-off-by: Peter Oh <peter.oh@bowerswilkins.com>
2020-12-01 00:09:22 +02:00
Peter Oh
e3608040c4 mesh: Update ssid->frequency as pri/sec channels switch
ssid->frequency is one of the variables used to get the channel number
from a given frequency. Leaving it as unchanged when pri/sec channel
switch will cause picking up a wrong channel number after applying the
secondary channel offset for HT40 and leads to failing interface
bring-up.

Signed-off-by: Peter Oh <peter.oh@bowerswilkins.com>
2020-11-30 12:01:39 +02:00
Peter Oh
f1df4fbfc7 mesh: Use setup completion callback to complete mesh join
Mesh join function is the last function to be called during mesh join
process, but it's been called a bit earlier than it's supposed to be, so
that some mesh parameter values such as VHT capabilities were not
applied correct when mesh join is in process. Moreover, the current
design of mesh join that is called directly after mesh initialization
isn't suitable for DFS channels to use, since mesh join process should
be paused until DFS CAC is done and resumed after it's done.

The callback will be called by hostapd_setup_interface_complete_sync().
There is a possibility that completing mesh init fails, so add error
handling codes for that.

Signed-off-by: Peter Oh <peter.oh@bowerswilkins.com>
2020-11-30 11:57:37 +02:00
Markus Theil
93da12fd9f mesh: Fix channel init order, disable pri/sec channel switch
wpa_supplicant_conf_ap_ht() has to happen before
hostapd_setup_interface() in order for its configuration settings to
have effect on interface configuration.

Disable primary and secondary channel switch because of missing tie
breaking rule/frames in mesh networks. A rather long comment about
this issue is placed in mesh.c in the corresponding place.

I was not able to reproduce the memory corruption during
mesh_secure_ocv_mix_legacy, which lead to a revert of a similar patch in
the past.

Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
2020-10-14 12:44:15 +03:00
Markus Theil
7f8ac02e85 HE/VHT: Fix frequency setup with HE enabled
Some places in the code base were not using the wrappers like
hostapd_set_oper_centr_freq_seg0_idx and friends. This could lead to
errors, for example when joining 80 MHz mesh networks. Fix this, by
enforcing usage of these wrappers.

wpa_supplicant_conf_ap_ht() now checks for HE capability before dealing
with VHT in order for these wrappers to work, as they first check HE
support in the config.

While doing these changes, I've noticed that the extra channel setup
code for mesh networks in wpa_supplicant/mesh.c should not be necessary
anymore and dropped it. wpa_supplicant_conf_ap_ht() should handle this
setup already.

Acked-by: John Crispin <john@phrozen.org>
Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
2020-10-14 12:44:09 +03:00
Jouni Malinen
bb9e3935dd driver: Add second driver capability flags bitmap
All 64 bits of the capability flags bitmap are used, so add a new
variable to hold future capability bits.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-04-19 15:53:02 +03:00
Jouni Malinen
9b391715cb mesh: Allow group management cipher to be configured
This allows BIP-GMAC-128, BIP-GMAC-256, or BIP-CMAC-256 to be used
instead of the previously hardcoded AES-128-CMAC as the group management
cipher when using mesh with PMF. For now, this can be configured by
setting a single group_mgmt value in the network block and doing that
consistently through all the STAs in the mesh.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-12-25 23:43:35 +02:00
Jouni Malinen
7d2ed8bae8 Remove CONFIG_IEEE80211W build parameter
Hardcode this to be defined and remove the separate build options for
PMF since this functionality is needed with large number of newer
protocol extensions and is also something that should be enabled in all
WPA2/WPA3 networks.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-09-08 17:33:40 +03:00
Sven Eckelmann
3459c54ac7 mesh: Add support for HE mode
Mesh points can partially support HE features (when requiring no
controlling STA/AP) as long as hardware supports it. The kernel just
requires support for HE mesh and wpa_supplicant can forward the peer
capabilities to the kernel for further processing.

Signed-off-by: Sven Eckelmann <seckelmann@datto.com>
2019-06-23 18:03:51 +03:00
John Crispin
464dcfd030 HE: Remove VHT_ prefix from CHANWITDH_* define
The bandwidth values are shared between VHT and HE mode so remove the
VHT specific prefix.

Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com>
Signed-off-by: John Crispin <john@phrozen.org>
2019-05-27 16:27:49 +03:00
Jouni Malinen
0de46d8a66 mesh: Fix RSN initialization failure handling
The driver was left in mesh mode (joined to the group) if RSN
authenticator initialization failed. This could result in next
operations failing due to unexpected driver state.

This was found with the following hwsim test case sequence:
mesh_wpa_auth_init_oom dpp_config_no_discovery

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-05-25 21:48:45 +03:00
Jouni Malinen
0f9632ceb8 mesh: More consistent checking of wpa_s->ifmsh in completion handler
It does not look like wpa_s->ifmsg could be NULL here, but better be
more consistent anyway to keep static analyzers happier by avoiding
dereference of wpa_s->ifmsh in the function before the NULL check for
it.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-02-18 18:46:40 +02:00
Masashi Honma
3e949655cc Revert "mesh: Apply channel attributes before setup interface"
This reverts commit 2564184440.

Commit 2564184440 ("mesh: Apply channel attributes before setup
interface") triggers some channel configurations to result in leaking
memory. This seems to be caused by hapd->started not getting set when
going through a callback to start hostapd operation (e.g., when using
HT40 coex scan) due to hostapd_setup_bss() not getting called. This
results in hostapd_free_hapd_data() not clearing allocated
hapd->wpa_auth. This can be reproduced with the hwsim test case
mesh_secure_ocv_mix_legacy.

A more complete cleanup of the pending mesh patch for DFS support seems
to be needed to fix this properly, so the best approach for now is to
revert this patch and bring it back once rest of the mesh changes are
ready to be applied.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2019-01-21 23:43:12 +02:00
Peter Oh
806db174fd mesh: Add VHT_CHANWIDTH_USE_HT to max_oper_chwidth
Channel width in VHT mode refers HT capability when the width goes down
to below 80 MHz, hence add checking HT channel width to its max
operation channel width. So that mesh has capability to select bandwidth
below 80 MHz.

Signed-off-by: Peter Oh <peter.oh@bowerswilkins.com>
2019-01-06 23:43:40 +02:00
Peter Oh
fed51174d6 mesh: Reflect country setting to mesh configuration for DFS
wpa_supplicant configuration has country parameter that is supposed to
be used in AP mode to indicate supporting IEEE 802.11h and 802.11d.
Reflect this configuration to Mesh also since Mesh is required to
support 802.11h and 802.11d to use DFS channels.

Signed-off-by: Peter Oh <peter.oh@bowerswilkins.com>
2019-01-03 13:26:47 +02:00
Peter Oh
2564184440 mesh: Apply channel attributes before setup interface
This helps mesh interface initialization with correct channel
parameters.

Signed-off-by: Peter Oh <peter.oh@bowerswilkins.com>
2019-01-03 13:13:07 +02:00
Peter Oh
3ba4a25e5d mesh: Set interface type to mesh before setting interface
Correct interface type is required to start DFS CAC that can be
triggered during interface setup.

Signed-off-by: Peter Oh <peter.oh@bowerswilkins.com>
2019-01-03 13:02:56 +02:00
Peter Oh
c95619c211 mesh: Set mesh VHT center frequency
VHT center frequency value is required to compose the correct channel
info.

Signed-off-by: Peter Oh <peter.oh@bowerswilkins.com>
2019-01-03 12:59:25 +02:00
Peter Oh
4b5453cedd mesh: Relocate RSN initialization
RSN initialization should work together with mesh join when it's used.
Since mesh join could be called at a different stage if DFS channel is
used, relocate the RSN initialization call to mesh join. It is still the
same call flow of mesh join before this if non-DFS channels are used,
hence no significant side effect will occur.

Signed-off-by: Peter Oh <peter.oh@bowerswilkins.com>
2019-01-03 12:36:34 +02:00
Peter Oh
0daa7b75fa mesh: Factor out mesh join function
Mesh join function consists of two parts which are preparing
configurations and sending join event to the driver. Since physical mesh
join event could happen either right after mesh configuration is done or
after CAC is done in case of DFS channel is used, factor out the
function into two parts to reduce redundant calls.

Signed-off-by: Peter Oh <peter.oh@bowerswilkins.com>
2019-01-03 12:35:56 +02:00
Peter Oh
1877842904 mesh: Factor out RSN initialization
RSN initialization can be used in different phases if mesh
initialization and mesh join don't happen in sequence such as DFS CAC is
done in between, hence factor it out to help convering the case. This
can also get rid of unnecessary indentation by handling the
mconf->security != MESH_CONF_SEC_NONE functionality in a helper
function.

Signed-off-by: Peter Oh <peter.oh@bowerswilkins.com>
2019-01-03 12:04:23 +02:00
Mathy Vanhoef
716ed96e8d OCV: Pass ocv parameter to mesh configuration
Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@cs.kuleuven.be>
2018-12-17 15:50:12 +02:00
Felix Fietkau
8fd29a0439 mesh: Fix crash with CONFIG_TAXONOMY enabled
wpa_s->ifmsh needs to be allocated using hostapd_alloc_iface() instead
of a direct call to os_zalloc(), otherwise the linked list for station
taxonomy items remains uninitialized, leading to a crash on the first
attempt to traverse that list

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-05-31 13:06:07 +03:00
Jouni Malinen
d6a65a83fb mesh: Register msg_ctx for hostapd/AP code
The use of hostapd code for a mesh interface did not register
hapd->msg_ctx. This needs to be done similarly to the existing cases in
wpa_supplicant AP and IBSS mode uses so that wpa_msg() calls from the
hostapd/AP code get delivered properly.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-05-19 17:22:48 +03:00
Daniel Golle
d5906fbb72 mesh: Properly handle sae_password
The recently introduced sae_password parameter was only handled properly
in wpa_supplicant/sme.c while wpa_supplicant/mesh.c assumed that
ssid->passphrase exclusively holds the secret.

Import the logic from sme.c to mesh.c to allow having only sae_password
set which otherwise throws this error:
AP-ENABLED
mesh: Passphrase for SAE not configured

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2018-04-13 12:09:33 +03:00
Masashi Honma
31a856a127 mesh: Make NL80211_MESHCONF_RSSI_THRESHOLD configurable
In some practical cases, it is useful to suppress joining to node in the
distance. The new field mesh_rssi_threshold could be used as RSSI
threshold for joining.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2017-05-08 16:23:02 +03:00
Johannes Berg
a1f11e34c4 Use os_memdup()
This leads to cleaner code overall, and also reduces the size
of the hostapd and wpa_supplicant binaries (in hwsim test build
on x86_64) by about 2.5 and 3.5KiB respectively.

The mechanical conversions all over the code were done with
the following spatch:

    @@
    expression SIZE, SRC;
    expression a;
    @@
    -a = os_malloc(SIZE);
    +a = os_memdup(SRC, SIZE);
    <...
    if (!a) {...}
    ...>
    -os_memcpy(a, SRC, SIZE);

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-03-07 13:19:10 +02:00
Jouni Malinen
694a3a0d64 mesh: Fix CONFIG_MESH=y build without CONFIG_IEEE80211W=y
Signed-off-by: Jouni Malinen <j@w1.fi>
2017-02-26 12:05:40 +02:00
Jouni Malinen
db5e53cb06 mesh: Fix struct hostapd_data initialization
The local custom version of allocating and initializing struct
hostapd_data within wpa_supplicant_mesh_init() is problematic. This has
already missed couple of initialization steps that are required. Instead
of trying to remember to keep this up to date, use
hostapd_alloc_bss_data() so that there is only one place for this
initialization.

This is fixing a recent issue where FILS HLP started using
hapd->dhcp_server and expected that to be initialized to -1. For the
mesh case, that did not happen and when removing the interface, the FILS
HLP implementation ended up unregistering eloop socket for
hapd->dhcp_server (= 0). This could result in missing socket callbacks
for an arbitrary socket.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-02-04 22:17:54 +02:00
Jouni Malinen
274e76f22f mesh: Fix channel configuration in pri/sec switch case
If 20/40 MHz co-ex scan resulted in switching primary and secondary
channels, mesh setup failed to update the frequency parameters for
hostapd side configuration and that could result in invalid secondary
channel configuration preventing creating of the mesh network. This
could happen, e.g., when trying to set up mesh on 5 GHz channel 36 and
co-ex scan finding a BSS on channel 40. Switching the pri/sec channels
resulted in hostapd code trying to check whether channel 32 is
available. Fix this by swapping the channels for hostapd configuration
when needed.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-12-13 15:25:52 +02:00
Jouni Malinen
f2f8616e80 Initialize hapd->nr_db in hostapd_alloc_bss_data()
Previously, this was initialized in hostapd_setup_bss() which made it
possible for a REMOVE_NEIGHBOR control interface command to be issued
prior to the list head pointers having been set. That resulted in a NULL
pointer dereference. Fix this by initializing the list head at the time
the data structure gets allocated.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-08-22 17:44:05 +03:00
Masashi Honma
052b8d38c5 mesh: Report HT operation mode to kernel
Report HT operation mode to kernel to broadcast correct IE in beacon
(for example HT operation IE).

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2016-08-18 20:46:15 +03:00
Masashi Honma
2bd6217173 mesh: Use WPA_DRIVER_MESH_CONF_FLAG_* as modification flag
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2016-08-18 20:40:13 +03:00
Masashi Honma
a1431ef8df mesh: Move max_peer_links parameter to appropriate struct
Accoding to the comment of struct wpa_driver_mesh_bss_params, the
max_peer_links parameter should be under that struct.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2016-08-18 20:33:39 +03:00
Masashi Honma
4ac2ea5738 mesh: Make DTIM period configurable
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2016-07-23 21:58:04 +03:00
Maital Hahn
4976618c76 mesh: Mark wpa_state COMPLETED when mesh join has been performed
In mesh interface, the wpa_supplicant state was either
DISCONNECT/SCANNING in non-secured connection or AUTHENTICATING in
secured connection. The latter prevented the scan. Update the
wpa_supplicant state in mesh to be COMPLETED upon initialization. This
is similar to the P2P GO case.

Signed-off-by: Maital Hahn <maitalm@ti.com>
2016-06-24 19:02:58 +03:00
Jouni Malinen
a151b0e37d mesh: Select pairwise and group cipher based on network profile
This allows the previously hardcoded CCMP cipher to be replaced in the
network profile for mesh.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-19 20:18:09 +03:00
Jouni Malinen
3b6deac0e7 mesh: Avoid use of hardcoded cipher
This moves pairwise, group, and management group ciphers to various mesh
data structures to avoid having to hardcode cipher in number of places
through the code. While CCMP and BIP are still the hardcoded ciphers,
these are now set only in one location.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-19 20:18:09 +03:00
Jouni Malinen
18aca1a07d mesh: Use ieee80211w profile parameter
This is initial step in fixing issues in how PMF configuration for RSN
mesh was handled. PMF is an optional capability for mesh and it needs to
be configured consistently in both hostapd structures (to get proper
RSNE) and key configuration (not included in this commit).

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-18 15:52:54 +03:00
Jouni Malinen
ee854ff679 mesh: Remove extra newline from the end of an error message
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-04 22:00:30 +03:00
Jouni Malinen
d2cc8bbbf6 mesh: Remove unreachable code
ssid->frequency cannot be 0 in wpa_supplicant_mesh_init() since
wpas_supplicant_join_mesh() rejects such a configuration.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-04 20:59:25 +03:00
Jouni Malinen
62fc8e6a40 mesh: Fix MESH_INTERFACE_ADD error path cleanup
If wpa_supplicant_add_iface() fails, we need to remove the added netdev,
not the existing wpa_s instance.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-05-30 01:49:22 +03:00
Masashi Honma
9f2cf23e2e mesh: Add support for PMKSA caching
This patch add functionality of mesh SAE PMKSA caching. If the local STA
already has peer's PMKSA entry in the cache, skip SAE authentication and
start AMPE with the cached value.

If the peer does not support PMKSA caching or does not have the local
STA's PMKSA entry in the cache, AMPE will fail and the PMKSA cache entry
of the peer will be removed. Then STA retries with ordinary SAE
authentication.

If the peer does not support PMKSA caching and the local STA uses
no_auto_peer=1, the local STA can not retry SAE authentication because
NEW_PEER_CANDIDATE event cannot start SAE authentication when
no_auto_peer=1. So this patch extends MESH_PEER_ADD command to use
duration(sec). Throughout the duration, the local STA can start SAE
authentication triggered by NEW_PEER_CANDIDATE even though
no_auto_peer=1.

This commit requires commit 70c93963ed
('SAE: Fix PMKID calculation for PMKSA cache'). Without that commit,
chosen PMK comparison will fail.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2016-03-20 17:56:38 +02:00
Masashi Honma
2604edbfbd mesh: Add MESH_PEER_ADD command
This allows a mesh peer connection to be initiated manually in
no_auto_peer mesh networks.

Signed-off-by: Natsuki Itaya <Natsuki.Itaya@jp.sony.com>
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2016-03-20 17:37:53 +02:00
Masashi Honma
e174ef341b mesh: Add MESH_PEER_REMOVE command
This command allows the specified mesh peer to be disconnected.

Signed-off-by: Natsuki Itaya <Natsuki.Itaya@jp.sony.com>
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2016-03-20 17:37:53 +02:00