Commit graph

2145 commits

Author SHA1 Message Date
Jouni Malinen
074f72849f tests: Secure mesh network connectivity with PMF enabled
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-18 12:20:50 +03:00
Jouni Malinen
20c7d26f80 tests: More wpa_supplicant/bss.c OOM coverage
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-06-17 20:41:09 +03:00
Jouni Malinen
4425b1ed71 tests: WPS and wpa_supplicant BSS entry limit
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-06-17 14:01:57 +03:00
Jouni Malinen
7309e804cf tests: Make mesh_missing_mic more robust
Check for MESH-PEER-CONNECTED from dev[1] before reporting MGMT-RX
timeout errors from dev[0]. This avoids false failures in case the short
0.01 s timeout at the end of the loop was not long enough to catch the
message.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-06-17 02:05:10 +03:00
Jouni Malinen
0b1b2044cc tests: Add sniffer check to wpas_mesh_max_peering
This verifies that the Accepting Additional Mesh Peerings field is being
cleared properly when the maximum peer links count is reached.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-13 00:04:47 +03:00
Jouni Malinen
a3bd53273e tests: Additional coverage in mesh_sae_groups_invalid
Additional coverage in mesh_rsn_sae_group() with non-zero
wpa_s->mesh_rsn->sae_group_index.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-12 17:56:02 +03:00
Jouni Malinen
61854f16ec tests: GAS/ANQP query and Address 3 value selection
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-06-10 22:30:29 +03:00
Jouni Malinen
739fd20cc3 tests: Mesh peering management protocol testing
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-05 11:43:37 +03:00
Jouni Malinen
81d6e230e3 tests: Secure mesh network and PMKID mismatch
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-05 11:17:00 +03:00
Jouni Malinen
66bb7d97dd tests: Secure mesh network and missing MIC
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-05 01:20:28 +03:00
Jouni Malinen
98628b7f07 tests: Mesh and failure to derive random nonce
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-05 00:24:47 +03:00
Jouni Malinen
044d739bdd tests: Secure mesh network and PMKSA caching failing due to OOM
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-05 00:20:06 +03:00
Jouni Malinen
e8739be842 tests: Mesh scan element parse error
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-05 00:13:40 +03:00
Jouni Malinen
699074d30c tests: Mesh network setup failing due to driver command failure
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-05 00:13:40 +03:00
Jouni Malinen
521a98a8f6 tests: Mesh and default beacon interval
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-04 21:47:22 +03:00
Jouni Malinen
ec87430ba1 tests: Extend coverage for mesh OOM testing
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-04 21:44:19 +03:00
Jouni Malinen
56d62fc3dd tests: Open mesh network on VHT 160 MHz channel
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-04 21:31:51 +03:00
Jouni Malinen
2cf6341e64 tests: Mesh and invalid frequency configuration
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-04 20:59:39 +03:00
Jouni Malinen
a64476403d tests: Mesh and local failures
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-04 00:40:38 +03:00
Jouni Malinen
b0ec3d772a tests: Mesh and local SAE failures
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-04 00:30:49 +03:00
Jouni Malinen
f0ee4535d2 tests: Mesh with invalid SAE group configuration
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-04 00:08:16 +03:00
Jouni Malinen
9ec916e9f4 tests: wpa_supplicant secure MESH and SAE group negotiation
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-05-30 21:15:30 +03:00
Jouni Malinen
582841689f tests: Secure mesh network setup local failure
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-05-30 21:10:58 +03:00
Jouni Malinen
4d4cdc3bb2 tests: wpa_supplicant mesh scan results and OOM
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-05-30 20:03:32 +03:00
Jonathan Afek
d28cfc2a25 tests: Support P2P group interfaces in hwsim remote tests
Start using the wpa_supplicant remote UDP interface for the control and
monitor sockets for P2P group interfaces so that P2P tests would work on
real hardware. Also have the group requests and events show in the test
log with the hostname and the interface name of the group interface.

Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
2016-05-30 17:56:43 +03:00
Jouni Malinen
aa59370b34 tests: wpa_supplicant mesh with dynamic interface addition failing
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-05-30 01:50:09 +03:00
Jouni Malinen
b15acadcfd tests: Mesh network setup failing due to OOM
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-05-30 01:05:16 +03:00
Jouni Malinen
8f5abdb874 tests: More coverage in ap_reassociation_to_same_bss
The extra wait forces the special reattach-scan case to be reached in
wpa_supplicant_scan().

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-05-28 23:28:15 +03:00
Jouni Malinen
3d53cd50ab tests: More coverage in wpas_ctrl_sched_scan_plans
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-05-28 23:00:42 +03:00
Jouni Malinen
4208329528 tests: Scan with SET freq_list and scan_cur_freq
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-05-28 22:47:31 +03:00
Jouni Malinen
fccc4bd518 tests: Duplicate SSID removal with scan_id list
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-05-28 22:47:31 +03:00
Jouni Malinen
0b0e4792d3 tests: Increase scan_fail coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-05-28 22:47:31 +03:00
Jouni Malinen
9f83f6a944 tests/remote: Fix a typo in a comment
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-05-28 16:34:58 +03:00
Jonathan Afek
483053b9d8 tests/remote: Fix execution of setup_hw
The code contained some places that used an additional argument for
setup_hw after -R and also contained places where setup_hw cmdline was
passed as a string instead of an argument list. It also contained places
where the ifname was only treated as a single interface and disregarded
the possiblity of multiple interfaces. This commit fixes these issues
and executes setup_hw from a single function for all cases.

Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
2016-05-28 16:34:19 +03:00
Jonathan Afek
8efc83d4e7 tests: Add support for wlantest for remote hwsim tests
Use a monitor interface given in the command line that is not also a
station or an AP as a monitor running wlantest on the channel used by
the test. This makes all the tests that use wlantest available for
execution on real hardware on remote hosts.

Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
2016-05-28 16:34:09 +03:00
Jonathan Afek
0335ff7f69 tests/remote: Fix usage of a non existing variable
In monitor.py in the remote tests code there is fucntion create() that
creates standalone monitor interfaces. In this function there is an
iteration of the ifaces of the host by using the ifaces variable but
this variable is non-existing. This patch creates this variable before
its usage.

Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
2016-05-28 16:34:09 +03:00
Jonathan Afek
5b45f478c2 tests/remote: Fix style and typos
Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
2016-05-28 16:34:02 +03:00
Jonathan Afek
a73cdd69c7 tests/remote: Extend get_monitor_params() to support P2P interfaces
This function is used for remote tests when a monitor interface is
needed on the channel on which the AP operates. This change enables us
to also query P2P interfaces for the channel information to use for
monitor interfaces.

Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
2016-05-28 16:33:56 +03:00
Jonathan Afek
04fd8ea1ba tests/remote: Use a function to add a log file to a remote host
Instead of accessing the logs list member of the remote host directly,
use a function to add logs to the remote host to be collected after the
test. This enables us to later have different implementation of remote
hosts or logs collection without requiring to have this list as the
implementation.

Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
2016-05-28 16:33:48 +03:00
Jonathan Afek
e2f3f0232f tests: Use 10 retries for over-the-air broadcast connectivity
The regular hwsim tests use both unicast and broadcast frames to test
the connectivity between 2 interfaces. For real hardware (remote hwsim
tests) the broadcast frames will sometimes not be seen by all connected
stations since they can be in low power mode during DTIM or because
broadcast frames are not ACKed. Use 10 retries for broadcast
connectivity tests for real hardware so that the test will pass if we
successfully received at least one of them.

Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
2016-05-28 16:33:41 +03:00
Jouni Malinen
90b4c73fdf tests: Fix ap_wpa2_eap_fast_prf_oom with the updated PRF implementation
This is needed to work with the tls_openssl.c changes that renamed the
function that is used for deriving the EAP-FAST keys.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-05-23 20:40:14 +03:00
Jouni Malinen
7f03ecc884 tests: Scan failures
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-05-23 18:43:58 +03:00
Jouni Malinen
a68a749322 tests: P2P group formation using P2PS method without specifying PIN
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-05-20 23:37:51 +03:00
Jouni Malinen
f260ce4be8 tests: wpa_supplicant AP mode - WPS disabled
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-05-14 19:43:30 +03:00
Jouni Malinen
50d06776c6 tests: Fix WEXT testing
Commit afb2e8b891 ('tests: Store P2P
Device ifname in class WpaSupplicant') did not take into account the
possibility of capa.flags not existing in get_driver_status() and broke
WEXT test cases. Fix this by checking that capa.flags is present before
looking at its value.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-05-14 18:59:47 +03:00
Janusz Dziedzic
a185e9b10b tests/remote: Add hwsim wrapper
This allow to run hwsim test cases.

duts go to apdev while refs go to dev

For now I tested:
./run-tests.py -d hwsim0 -r hwsim1 -h ap_open -h dfs
./run-tests.py -r hwsim0 -r hwsim1 -h ibss_open -v
./run-tests.py -r hwsim0 -r hwsim1 -r hwsim2 -d hwsim3 -d hwsim4 -h ap_vht80 -v
./run-tests.py -r hwsim0 -r hwsim1 -r hwsim2 -d hwsim3 -d hwsim4 -h all -k ap -k vht

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-05-14 17:56:37 +03:00
Janusz Dziedzic
ff9bb8a210 tests/remote: Add test_example.py
This is simple example how to write a simple test case.

modprobe mac80211_hwsim radios=4
run example:
./run-tests.py -d hwsim0 -r hwsim1 -t example

run example with monitors:
./run-tests.py -d hwsim0 -r hwsim1 -t example -m all -m hwsim2

run example with trace record:
./run-tests.py -d hwsim0 -r hwsim1 -t example -T

run example with trace and perf:
./run-tests.py -d hwsim0 -r hwsim1 -t example -T -P

restart hw before test case run:
./run-tests.py -d hwsim0 -r hwsim1 -t example -R

run example verbose
./run-tests.py -d hwsim0 -r hwsim1 -t example -v

For perf/trace you need to write own hw specyfic scripts:
trace_start.sh, trace_stop.sh
perf_start.sh, perf_stop.sh

In any case you will find logs in the logs/current/ directory.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-05-14 17:56:37 +03:00
Janusz Dziedzic
a73fa13be2 tests/remote: Add utils file
Add rutils.py for remote tests.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-05-14 17:56:37 +03:00
Janusz Dziedzic
ede4719718 tests/remote: Add monitor.py
Add monitor support. This supports monitors added to the current
interfaces. This also support standalone monitor with multi interfaces
support. This allows to get logs from different channels at the same
time to one pcap file.

Example of t3-monitor added to config.py file.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-05-14 17:56:37 +03:00
Janusz Dziedzic
5865186e31 tests: Add remote directory to tests
Add tests/remote directory and files:
config.py - handle devices/setup_params table
run-tests.py - run test cases
test_devices.py - run basic configuration tests

You can add own configuration file, by default this is cfg.py, and put
there devices and setup_params definition in format you can find in
config.py file. You can use -c option or just create cfg.py file.

Print available devices/test_cases:
./run-tests.py

Check devices (ssh connection, authorized_keys, interfaces):
./run-test.py -t devices

Run sanity tests (test_sanity_*):
./run-test.py -d <dut_name> -t sanity

Run all tests:
./run-tests.py -d <dut_name> -t all

Run test_A and test_B:
./run-tests.py -d <dut_name> -t "test_A, test_B"

Set reference device, and run sanity tests:
./run-tests.py -d <dut_name> -r <ref_name> -t sanity

Multiple duts/refs/monitors could be setup:
e.g.
./run-tests.py -d <dut_name> -r <ref1_name> -r <ref2_name> -t sanity

Monitor could be set like this:
./run-tests.py -d <dut_name> -t sanity -m all -m <standalone_monitor>

You can also add filters to tests you would like to run
./run-tests.py -d <dut_name> -t all -k wep -k g_only
./run-tests.py -d <dut_name> -t all -k VHT80

./run-test.py doesn't start/terminate wpa_supplicant or hostpad,
test cases are resposible for that, while we don't know test
case requirements.

Restart (-R) trace (-T) and perf (-P) options available.
This request trace/perf logs from the hosts (if possible).

As parameters each test case get:
- devices - table of available devices
- setup_params
- duts - names of DUTs should be tested
- refs - names of reference devices should be used
- monitors - names of monitors list

Each test could return append_text.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-05-14 17:56:35 +03:00