Commit graph

173 commits

Author SHA1 Message Date
Ashok Kumar Ponnaiah
3a3cb8ee81 wlantest: Indicate if a TKIP/CCMP replay has Retry=1
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-09-03 15:41:35 +03:00
Ashok Kumar Ponnaiah
fa6fff1893 wlantest: Recognize CCMP-256, GCMP, and GCMP-256 ciphers
This adds support for displaying whether a BSS or STA is using one of
the newer cipher suites.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-09-03 15:41:35 +03:00
Jouni Malinen
f6ff5160f0 wlantest: Add support for OSEN
This allows Hotspot 2.0 OSEN connection to be analyzed more
conveniently. The frames from an OSEN association can now be decrypted
using an MSK file.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-05-15 16:56:59 +03:00
Johannes Berg
30476e4fe7 wlantest: Tag and ignore generated packets
Rather than ignoring packets with a minimal 8-byte radiotap
header, which may occur elsewhere, tag generated (decrypted)
packets with an empty vendor namespace tag and ignore those.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-13 23:54:25 +03:00
Johannes Berg
bacb984b2d radiotap: Update radiotap parser to library version
Update the radiotap parser to the latest version of the
http://git.sipsolutions.net/radiotap.git/ library to get
parsing for vendor namespaces.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-13 23:49:59 +03:00
Jouni Malinen
0187c41d88 Declare wpa_debug_* variables in src/utils/wpa_debug.h
These were somewhat more hidden to avoid direct use, but there are now
numerous places where these are needed and more justification to make
the extern int declarations available from wpa_debug.h. In addition,
this avoids some warnings from sparse.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-31 19:29:52 +02:00
Jouni Malinen
ae98e1f5b2 wlantest: Add a BSS probe_response counter
This can be used to verify whether an AP replies to a Probe Request
frame.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-26 13:37:06 +02:00
Jouni Malinen
99d7c1dedf wlantest: Add per-TID RX/TX counters
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-24 20:21:27 +02:00
Johannes Berg
594516b4c2 Use monotonic clock for relative time for eloop if available
Relative time shouldn't be calculated based on gettimeofday
because that clock can jump (e.g., when the time is adjusted
by the system administrator.)

On systems where that is available, use CLOCK_BOOTTIME (on
fairly recent Linux systems, this clock takes into account
the time spend suspended) or CLOCK_MONOTONIC (on Linux and
some POSIX systems, this clock is just freely running with
no adjustments.)

Reported-by: Holger Schurig <holgerschurig@gmail.com>
Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-11-20 23:52:56 +02:00
Jouni Malinen
c41e1d7cac wlantest: Add more pcapng notes on EAPOL processing
Some of the MIC validation steps were not logged in the pcapng notes.
Add these to make the entries more consistent and to provide more
information to ease debugging.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-17 23:43:11 +02:00
Jouni Malinen
a0530dff5b wlantest: Allow additional PTKs to be specified from a file
A text file with a hexdump of PTK (KCK|KEK=TK with 48 octets for CCMP or
64 octets for TKIP or alternative 16 or 32 octet TK for CCMP/TKIP) can
now be read from a file specified with the -T command line argument. If
the current known PTK fails to decrypt a frame (or if no current PTK is
known) all listed PTKs are iterated to see if any of them matches.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-17 23:09:38 +02:00
Jouni Malinen
de8bb171f6 wlantest: Add support for debug log timestamps
The new command line argument -t can now be used to request wlantest to
include a timestamp in the log entries.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-17 21:45:32 +02:00
Jouni Malinen
d33fef57a4 wlantest: Add support for log output into a file
This allows wlantest debug log output to be directed to a file so that
RELOG command can be used to rotate files more easily than stdout.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-17 21:40:17 +02:00
Jouni Malinen
c99a721e5b wlantest: Add RELOG command to reopen log/capture files
This can be used similarly to the wpa_supplicant RELOG command to
rotate log and capture files.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-17 21:39:22 +02:00
Jouni Malinen
0e91337d54 Validate P802.11ac test vector result
Verify the expected value against P802.11ac/D7.0 CCMP-256, GCMP-256,
BIP-GMAC-128, and BIP-GMAC-256 test vectors.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-17 20:55:38 +02:00
Jouni Malinen
84a65fd6a3 Extend GCMP test vectors to include both MPDUs
IEEE Std 802.11ad-2012 includes two test vectors for GCMP. Verify both
of those and also verify that the results match the values in the
standard instead of just verifying that decrypted frame matches
original.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-17 20:34:01 +02:00
Jouni Malinen
e7ecab4a3b Use ARRAY_SIZE() macro
Replace the common sizeof(a)/sizeof(a[0]) constructions with a more
readable version.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-10-26 17:49:05 +03:00
Johannes Berg
de36e348f9 wlantest: Always write radiotap pcap-ng
When writing pcap-ng files, always include a radiotap
header even if there wasn't one in the input. For now
just drop prism headers, I don't have any to test.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-06-22 13:17:14 +03:00
Jouni Malinen
3b5a1a7769 wlantest: Recognize hwsim_test packets
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-26 22:19:52 +03:00
Jouni Malinen
ace4e460e5 wlantest: Select correct TDLS context if multiple exists
Some corner cases may result in both directions of TDLS tracking context
existing. If that is the case, the incorrect one may end up getting
picked when figuring out which TK to use for decryption or fix
statistics counter to increment. Fix this by preferring the context that
has TDLS link up.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-26 22:14:00 +03:00
Jouni Malinen
4ac800db82 wlantest: Track TDLS setup nonces
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-26 22:14:00 +03:00
Jouni Malinen
e4d99217f7 wlantest: Use add_note() to annotate frames
This adds debug information from wlantest into pcapng frame comments to
make the information more convenient to use, e.g., in Wireshark.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-26 22:14:00 +03:00
Jouni Malinen
ba2beacc97 wlantest: Add support for writing pcapng files
The new -n<file> command line argument can be used to request wlantest
to write all read or captured frames into a pcapng file. This is similar
to the -w argument, but with pcapng allowing per-frame comments to be
embedded in the file.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-26 20:58:42 +03:00
Chaitanya T K
409cd147b7 wlantest: Fix the injection of protected broadcast frames
Injecting protected broadcast frames fails because of the unnecessary
null check for sta. In case of broadcast frames sta can be null, so
remove the check.

Reported-by: Janardhan R <janardhanr@posedge.com>
Signed-hostap: Chaitanya T K <chaitanyatk@posedge.com>
2013-05-04 11:36:28 +03:00
Jouni Malinen
f2f66ad7e8 wlantest: Fix CCMP-256 cipher
TK was incorrectly truncated in a way that resulted in CCMP (128-bit
key) encryption being used in practice.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-04-05 22:18:25 +03:00
Jouni Malinen
ce26864e79 wlantest: Get rid of compiler warning
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-29 21:24:10 +02:00
Jouni Malinen
8cb9bc19fb wlantest: Add wlantest_cli command add_wep
This can be used to configure a known WEP key for decrypting WEP frames.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-29 19:12:35 +02:00
Jouni Malinen
0321bcdfa8 wlantest: Add radiotap header when re-writing DLT_IEEE802_11 file
When using DLT_IEEE802_11 datalink type in a pcap file, wlantest will now
add a radiotap header to the re-written pcap file to make sure all frames
in the output file will include the radiotap header.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-01-17 16:31:19 +02:00
Jouni Malinen
2531517600 wlantest: Add -F option for assuming FCS is included
When using DLT_IEEE802_11 datalink type in a pcap file, wlantest can now
be instructed to assume there is an FCS included in the frame by adding
the new -F command line argument. This will make wlantest validate the
FCS and strip it from the frame before processing.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-01-17 12:55:30 +02:00
Jouni Malinen
44f6d554ee wlantest: Process TX status frames as RX frames too
This is needed to allow capture files from the mac80211 cooked monitor
mode interface to be processed properly. Without this, the locally
generated frames may not get processed.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-12-16 12:35:07 +02:00
Jouni Malinen
e88f0901eb wlantest: Add BIP-GMAC-128/256 test vectors
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-09-09 19:04:53 +03:00
Jouni Malinen
7d19d3e9db wlantest: Add CCMP-256 test vector
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-09-09 18:38:18 +03:00
Jouni Malinen
4bf3910574 Move AES-CCM implementation into src/crypto
This is a generic AES CCM implementation that can be used for other
purposes than just implementing CCMP, so it fits better in a separate
file in src/crypto.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-09-09 18:07:19 +03:00
Jouni Malinen
05d6054cec wlantest: Move generic AES-CCM into separate functions
This part of the implementation is not specific to CCMP and could be
used for other purposes, too.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-09-09 18:03:31 +03:00
Jouni Malinen
f173295600 wlantest: Add GCMP-256 test vector
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-09-09 14:01:22 +03:00
Jouni Malinen
d140db6adf Add support for using 192-bit and 256-bit keys with AES-GCM
This adds 192-bit and 256-bit key support to the internal AES
implementation and extends the AES-GCM functions to accept key length to
enable longer AES key use.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-09-09 13:30:51 +03:00
Jouni Malinen
af0963fab4 Support arbitrary IV length with AES-GCM
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-09-09 00:49:54 +03:00
Jouni Malinen
1cd7a5032a Move AES-GCM implementation into src/crypto
This is a generic AES GCM and GMAC implementation that can be used for
other purposes than just implementing GCMP, so it fits better in a
separate file in src/crypto.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-09-08 23:48:08 +03:00
Jouni Malinen
be87d3c345 wlantest: Allow GHASH update calls to avoid extra allocation
There is no need to allocate a temporary buffer and build GHASH input
data into it. Instead, ghash() is trivial to split into update part that
can be called separately for each segment.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-09-08 23:40:06 +03:00
Jouni Malinen
b4a5fcb286 wlantest: Remove CCMP specific AAD handling from GCMP
GCMP encodes length of AAD differently, so remove the unnecessary
code that got copied from the CCMP implementation.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-09-08 22:10:05 +03:00
Jouni Malinen
37c8fe2e3b wlantest: Move GCM-AE and GCM-AD into separate functions
This splits the more generic GCM operations from GCMP specific
implementation.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-09-08 22:08:00 +03:00
Jouni Malinen
455bcc0f5c wlantest: Add GCMP implementation and test vectors from P802.11ad/D9.0
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-09-08 20:00:54 +03:00
Jouni Malinen
5a652e71b0 wlantest: Check TKIP/CCMP decryption routines for test vectors
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-09-08 17:08:53 +03:00
Jouni Malinen
7d68241d3e wlantest: Add IEEE Std 802.11-2012, M.9.1 BIP test vector
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-09-08 17:08:53 +03:00
Jouni Malinen
a9eae7efe3 wlantest: Move BIP function into a separate function and file
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-09-08 17:08:53 +03:00
Jouni Malinen
6522984086 wlantest: Add IEEE Std 802.11-2012, M.9.2 CCMP (mgmt) test vector
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-09-08 16:44:37 +03:00
Jouni Malinen
3ae8968679 wlantest: Add program for generating IEEE 802.11 test vectors
This version can generate CCMP and TKIP test vectors that match with
the IEEE Std 802.11-2012, Annex M.6.3 and M.6.4.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-09-08 16:44:37 +03:00
Jouni Malinen
729f02e149 wlantest: Implement tkip_encrypt()
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-09-08 14:03:10 +03:00
Jouni Malinen
add11058e2 wlantest: Fix couple of compiler warnings
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-22 11:16:48 +03:00
Jouni Malinen
f9884c096a Convert os_zalloc() for an array to use os_calloc()
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-13 20:44:21 +03:00