Commit graph

42 commits

Author SHA1 Message Date
Jouni Malinen
e47588279a WPS: Report NFC connection handover completion differently
Instead of reporting only one connection handover message, report
completion of NFC connection handover with carrier record from both the
request and select messages.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-11 18:43:46 +02:00
Jouni Malinen
bd692a8b0e WPS: Change listen time to match nfcpy default (250 ms)
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-02-10 18:49:20 +02:00
Jouni Malinen
b8dbc5d689 WPS: Report only the carrier record from NFC to wpa_supplicant
Since there could be multiple carrier records, it is cleaner to report
only the WPS carrier record instead of full NFC connection handover
select to wpa_supplicant.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-02-10 18:42:43 +02:00
Jouni Malinen
bbaaaee171 WPS: Fetch only the carrier record from wpa_supplicant for NFC
Since there could be multiple carrier records, it is cleaner to build
only the WPS carrier record instead of full NFC connection handover
request within wpa_supplicant.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-02-10 18:19:59 +02:00
Jouni Malinen
cf78e2acc8 WPS: Clean up debug prints with nfcpy
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-02-10 16:27:59 +02:00
Jouni Malinen
8414860422 WPS: Remove 0.5 sec extra wait from NFC handover with nfcpy
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-02-10 16:27:14 +02:00
Jouni Malinen
dc6bda1123 WPS: Use alternating poll/listen for NFC peer discovery with nfcpy
This is needed to find the NFC peer to avoid cases where both devices
could be using the same operation.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-02-10 16:25:20 +02:00
Jouni Malinen
8140ae969b WPS: Configure logging to show nfcpy log message
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-02-10 16:20:25 +02:00
Jouni Malinen
e50d01b4f1 WPS: Add support for NFC connection handover with nfcpy
This helper script can now handle both reading of a NFC tag and
initiation of NFC connection handover if a peer NFC device is touched.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-11-04 16:04:42 +02:00
Jouni Malinen
dab710c4d0 WPS: Move NFC tag processing into a separate function
This makes it cleaner to add processing of other NFC operations to the
python script.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-11-04 15:56:46 +02:00
Jouni Malinen
ec4f5a37b8 WPS: Move wpactrl setup into a separate function
This makes it easier to share this functionality for new NFC use cases.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-11-04 15:53:33 +02:00
Jouni Malinen
d4f612b7dd WPS: Add an example python script for NFC operations
wps-nfc.py uses nfcpy and python-wpactrl to provide NFC tag information
to wpa_supplicant for WPS operations.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-11-03 22:43:15 +02:00
Michael Naumov
2ce7033678 P2P: Add D-Bus python script to perform Disconnect
D-Bus script using python glib is added to perform Disconnect on an
interface.

Signed-hostap: Michael Naumov <michael.naumov@intel.com>
Signed-hostap: Nirav Shah <nirav.j2.shah@intel.com>
2012-08-05 00:24:40 +03:00
Michael Naumov
008d824f20 P2P: Add D-Bus python script to perform p2p_invite
D-Bus script using python glib is added to perform p2p_invite on a group
interface to invite a peer.

Signed-hostap: Michael Naumov <michael.naumov@intel.com>
Signed-hostap: Nirav Shah <nirav.j2.shah@intel.com>
2012-08-05 00:20:48 +03:00
Michael Naumov
b682d6a73d P2P: Add D-Bus python scripts to perform additional commands
Four D-Bus scripts using python glib are added to perform the following
operations: p2p_flush, p2p_group_add, p2p_listen and p2p_stop_find.

Signed-hostap: Michael Naumov <michael.naumov@intel.com>
Signed-hostap: Nirav Shah <nirav.j2.shah@intel.com>
2012-07-04 21:07:53 +03:00
Michael Naumov
acc5f4ec60 P2P: Add dbus python scripts to perform p2p_find and p2p_connect
Two DBUS scripts using python glib are added to perform p2p_find and
p2p_connect operations respectively. p2p_connect script just performs
the traditional connect to create a new p2p group. Additional updates
will be required to perform join, auth etc. al.

Signed-hostap: Michael Naumov <michael.naumov@intel.com>
Signed-hostap: Nirav Shah <nirav.j2.shah@intel.com>
2012-06-30 13:11:26 +03:00
Johannes Berg
2d43d37ff2 DBus: Add ability to report probe requests
Some applications require knowing about probe requests to identify
devices. This can be the case in AP mode to see the devices before they
connect, or even in P2P mode when operating as a P2P device to identify
non-P2P peers (P2P peers are identified via PeerFound signals).

As there are typically a lot of probe requests, require that an
interested application subscribes to this signal so the bus isn't always
flooded with these notifications. The notifications in DBus are then
unicast only to that application.

A small test script is also included.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2012-04-01 21:14:48 +03:00
Jouni Malinen
0be3542338 Fix BSS property names in the example D-Bus script
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-01-01 18:55:55 +02:00
Jouni Malinen
47662f4017 Add example WPS AP mode UI for wpa_supplicant
This script shows some minimal WPS user interface requirements for
mobile AP support with wpa_supplicant.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2011-12-01 22:14:07 +02:00
Pavel Roskin
ffbf1eaa26 Fix typos found by codespell
Signed-off-by: Pavel Roskin <proski@gnu.org>
2011-09-22 00:43:59 +03:00
Jouni Malinen
afa4926c95 P2P: Use alternative way of starting dnsmasq if needed
Some other dnsmasq users (like libvirt) seem to be binding the DHCP
server to all interfaces which prevents the previously used mechanism
here from working (bind on the DHCP socket fails). If a failure is
noticed, try to start dnsmasq with -z option to avoid that.
2010-11-26 15:47:13 +02:00
Jouni Malinen
7fbf99aa6b P2P: Add an example p2p-action script for udhcpc/udhcpd 2010-09-09 07:17:21 -07:00
Jouni Malinen
72044390f3 P2P: Add support for cross connection
If enabled, cross connection allows GO to forward IPv4 packets
using masquerading NAT from the P2P clients in the group to an
uplink WLAN connection. This is disabled by default and can be
enabled with "wpa_cli p2p_set cross_connect 1" on the P2P device
interface.
2010-09-09 07:17:20 -07:00
Jouni Malinen
42f0101b4d P2P: wpa_cli action calls for P2P group started/removed events 2010-09-09 07:17:18 -07:00
Jouni Malinen
36d1343a4b Do not inhibit suspend even if wpa_cli command fails
There is no point in inhibiting suspend in case wpa_supplicant is
not running and as such, return success unconditionally from this
script.
2010-02-27 20:03:13 +02:00
Jouni Malinen
207ef3fb12 Add suspend/resume notifications
wpa_supplicant can now be notified of suspend/resume events, e.g.,
from pm-action scripts. This allows wpa_supplicant to clear information
that may become invalid during a suspend operation.
2010-02-27 18:46:02 +02:00
Witold Sowa
7899e2f42d dbus: Change WPA/RSNIE byte array props to dicts
Expose RSN and WPA properties for BSS objects containing information
about key management and cipher suites. Get rid of WPA/RSN/WPSIE
byte array properties and add IEs byte array property with all IE data
instead.
2010-01-16 16:37:37 +02:00
Witold Sowa
8e5568f874 dbus: Change BSS, Network and some errors interface names
Remove ".Interface" part from BSS and Network objects and some
error names.
2010-01-09 11:41:09 +02:00
Jouni Malinen
d97572a40f dbus: Add a test script for D-Bus API signals 2010-01-06 21:33:54 +02:00
Jouni Malinen
d58f4a8177 Remove forgotten script termination attempt 2010-01-06 20:23:47 +02:00
Witold Sowa
75d328af50 dbus: Change BSS property MaxRate to Rates
Instead of exposing maximum BSS bit rate, expose sorted array
of all supported rates.
2010-01-04 16:52:30 +02:00
Jouni Malinen
58e1452474 dbus: Remove forgotten, unused functions from GetAll script 2010-01-04 16:35:38 +02:00
Jouni Malinen
777f07b62d dbus: Update example scripts to use PropertiesChanged
The StateChanged signal was removed, to use PropertiesChanged instead.
2010-01-04 16:34:06 +02:00
Jouni Malinen
2fd13f1bae dbus: Set ProcessCredentials to get WPS Credential signal 2010-01-01 23:04:27 +02:00
Jouni Malinen
1701996209 dbus: Add example script for running WPS PBC 2010-01-01 22:34:15 +02:00
Jouni Malinen
e7f7d231a4 dbus: Fix example get-list-of-interfaces operation 2010-01-01 13:16:33 +02:00
Jouni Malinen
70993cd8e2 dbus: Update example script to use the new API 2010-01-01 13:10:09 +02:00
Jouni Malinen
d84c8f1413 dbus: Add example script for fetching all properties with Getall 2010-01-01 11:00:11 +02:00
Jouni Malinen
c9df730b03 Add handling of BSSAdded and BSSRemoved events 2009-12-27 21:42:02 +02:00
Jouni Malinen
55fc1ce024 dbus: Add an example python script for using the new dbus interface
This has example code for fetching and interface object and optionally
creating a new interface is one is not found. After that, a scan is
requested and the script continues to listed for signals from
wpa_supplicant and print information about scan results and state
changes.
2009-12-26 18:41:01 +02:00
Jouni Malinen
d9521c7438 Example configuration for EAP-TLS authentication using PKCS#11 TPM token 2008-05-23 19:41:05 +03:00
Jouni Malinen
6fc6879bd5 Re-initialize hostapd/wpa_supplicant git repository based on 0.6.3 release 2008-02-27 17:34:43 -08:00