Commit graph

30 commits

Author SHA1 Message Date
Jouni Malinen
fc4e2d9501 HT: Remove unneeded struct ht_cap_ie wrapper
It is simpler to just use the HT Capabilities IE payload structure
as-is.
2009-11-29 13:04:21 +02:00
Jouni Malinen
4a867032ae Remove deprecated driver_ops handlers
This gets rid of previously deprecated driver_ops handlers set_wpa,
set_drop_unencrypted, set_auth_alg, set_mode. The same functionality
can be achieved by using the init/deinit/associate handlers.
2009-11-23 20:22:38 +02:00
Jouni Malinen
642187d6bf Merge set_key and hapd_set_key driver_ops into a single function 2009-11-23 16:58:32 +02:00
Jouni Malinen
5d67487244 Merge set_beacon driver_ops into a single one
Clean up driver interface by merging hostapd and wpa_supplicant
specific set_beacon driver_ops into a single one. In addition,
merge set_beacon_int into to the same operation.
2009-11-23 15:26:05 +02:00
Jouni Malinen
1fb1a6f0bf Remove unused set_broadcast_ssid() driver op
None of the driver wrappers user this. hostapd-controlled broadcast SSID
hiding can only be used with drivers that use hostapd for handling
Beacon and Probe Request/Response frames.
2009-04-22 16:15:24 +03:00
Jouni Malinen
9351257cfb Remove the unused set_ieee80211d driver op
None of the driver wrappers use this. Only the drivers that use hostapd
for Beacon and Probe Request/Response handling can now use IEEE 802.11d
properly.
2009-04-22 16:11:22 +03:00
Jouni Malinen
30985b8600 Remove unused set_retry() driver op 2009-04-21 18:01:43 +03:00
Jouni Malinen
61693eaa80 hostapd: Remove unused passive scan functionality
This was not really supported by any of the included driver wrappers. If
this functionality is desired in the future, this (or something similar)
can be added with the changes needed into a driver wrapper to use the
mechanism.
2009-04-17 15:47:37 +03:00
Jouni Malinen
412036f5f0 Provide own_addr buffer in hapd_init() parameters
This reduces number of places in driver wrapper that would need to
dereference struct hostapd_data pointer directly.
2009-04-17 11:55:51 +03:00
Jouni Malinen
731723a5bd Add own_addr as a parameter to sta_deauth() and sta_disassoc()
This fixes deauth/disassoc frames in secondary BSSes when using
multi-BSSID. In addition, it reduces need to dereference
struct hostapd_data inside driver wrappers.
2009-04-17 11:37:22 +03:00
Jouni Malinen
ad1e68e6b5 Clean up HT40 scan and share nl80211 scanning code
Instead of adding a new driver_ops for fetching neighbor BSS data (that
nl80211 driver interface had to scan during initialization), share the
same scan operations that wpa_supplicant is using. This gets rid of
duplicated scan code in driver_nl80211.c (and better yet, removes large
part of old WEXT code).

hostapd interface initialization is now completed in a callback, if
needed, i.e., he_features channel/hw_mode selection can use as much time
as needed. This can also help with radar detection in the future.
2009-04-16 16:22:40 +03:00
Jouni Malinen
b4fd6fab5b Share driver beacon configuration handlers 2009-04-09 23:44:39 +03:00
Jouni Malinen
92f475b4d8 Merge hostapd driver init functions into one
Use a parameter structure to pass in information that can be more easily
extended in the future. Include some of the parameters that were
previously read directly from hapd->conf in order to reduce need for
including hostapd/config.h into driver wrappers.
2009-04-09 23:28:21 +03:00
Jouni Malinen
e785c2ba3b Share same set_country driver op for hostapd and wpa_supplicant 2009-04-09 20:01:25 +03:00
Jouni Malinen
9f324b61ba Share management frame send driver op for hostapd and wpa_supplicant
The same implementation can be shared in most cases, so better share the
same driver_ops handler function.
2009-04-09 19:57:20 +03:00
Jouni Malinen
8342130269 Remove flags parameter from send_mgmt_frame() driver op
This was not documented properly and was not really used nor would it be
suitable to be used in generic way as it was implemented. It is better
to just remove the parameter since there does not seem to be any
reasonable use for it.
2009-04-09 19:42:19 +03:00
Jouni Malinen
c3965310e6 Use common get_hw_feature_data for hostapd and wpa_supplicant
This merges the driver wrapper implementations to use the same
implementation both for hostapd and wpa_supplicant operations to avoid
code duplication.
2009-04-09 14:11:39 +03:00
Jouni Malinen
c51218372f Merge wpa_supplicant and hostapd driver wrapper implementations
This commit merges the driver_ops structures and implementations from
hostapd/driver*.[ch] into src/drivers. This is only an initial step and
there is room for number of cleanups to share code between the hostapd
and wpa_supplicant parts of the wrappers to avoid unnecessary source
code duplication.
2009-04-09 13:40:12 +03:00
Jouni Malinen
6de726abb5 Remove unused driver_ops
get_rts, get_frag, get_retry, and set_key_tx_rx_threshold were not used
anywhere, so get rid of them.
2009-04-03 11:59:08 +03:00
Jouni Malinen
a9a2cb5abb Merge wireless_event_{,de}init() into {,de}init() driver op 2009-04-03 11:51:40 +03:00
Jouni Malinen
74f2ad326f Merge set_dtim_period() into set_beacon()
No need for a separate driver_ops handler for setting DTIM period since
this is always set at the same time with the Beacon data. Beacon
interval is still set separately since it is consider per-radio
parameter (Beacon data and DTIM period are per-BSS parameters).
2009-04-02 16:05:21 +03:00
Jouni Malinen
9c6d8e1db5 Make channel number available to set_freq()
Since we have the channel number, we could as well pass it to the driver
wrapper should there be drivers that use channel number instead of
frequency.
2009-03-30 17:55:37 +03:00
Jouni Malinen
89d39d9d6c Move hostapd driver_ops to use similar set_key with wpa_supplicant 2009-03-25 17:49:22 +02:00
Jouni Malinen
fb86519d12 Replace deprecated add_sta() with add_sta2() 2009-03-25 16:55:09 +02:00
Jouni Malinen
909a6ef00c Remove deprecated version of set_freq() and rename the new version 2009-03-25 16:48:22 +02:00
Jouni Malinen
4f86ca6870 Remove unused set_assoc_ap() wpa_driver_ops
The need for this was removed with the experimental
hostapd-as-a-client-STA functionality.
2009-03-25 16:45:57 +02:00
Jouni Malinen
b1c0e29733 Include config.h explicitly into files that actually use it
hostapd.h does not need to include config.h.
2009-03-25 16:29:00 +02:00
Jouni Malinen
5eb4e3d024 802.11n: scan for overlapping BSSes before starting 20/40 MHz channel
Try to match PRI/SEC channel with neighboring 20/40 MHz BSSes per
IEEE 802.11n/D7.0 11.14.3.2. This is not yet complete implementation,
but at least some parts of the 40 MHz coex are improved.

40 MHz operation maybe rejected (i.e., fall back to using 20 MHz) or
pri/sec channels may be switched if needed.
2009-02-04 21:19:54 +02:00
Jouni Malinen
25ba219f3e Removed unused set_regulatory_domain driver function 2009-01-13 19:12:25 +02:00
Jouni Malinen
bfddd95c9e Split hostapd/driver.h into two files
driver.h contains the definitions needed in driver wrapper
implementations (driver_*.c) and driver_i.h contains the definitions
that are used in core hostapd code to interact with the driver wrappers.
2009-01-08 20:02:56 +02:00