Commit graph

34 commits

Author SHA1 Message Date
Jouni Malinen
38279bdb35 D-Bus: Coding style cleanup
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-02 22:50:26 +02:00
Tomasz Bursztyka
1274ec2329 dbus: Add an interface configuration entry to set the WPS methods
It is thus possible to restrain WPS methods to prefered ones, like PBC
only, etc.

Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2014-10-04 18:29:33 +03:00
Dan Williams
7a4a93b959 dbus: Add SignalPoll() method to report current signal properties
Analogous to the control interface's SIGNAL_POLL request.

Signed-hostap: Dan Williams <dcbw@redhat.com>
2014-09-13 17:21:54 +03:00
Dan Williams
3bd3257a0a dbus: add BSS Age property to indicate last-seen time
"Age" is the age in seconds since the BSS was last seen, and is
emitted as a PropertyChanged signal whenever the BSS is updated
from a scan result. It also returns the correct age when queried
directly.

This property can be used to resolve issues where, if no other
properties of the BSS changed from scan results (for example,
if the BSS always had 100% signal) no D-Bus signals would be
emitted to indicate that the BSS had just been seen in the scan.

Signed-hostap: Dan Williams <dcbw@redhat.com>
2014-09-07 19:18:45 +03:00
Peter Qiu
0f44ec8eba Add a reattach command for fast reassociate-back-to-same-BSS
Add "reattach" command to perform single-channel single-ssid scan
instead of full scan when trying to reconnect to the currently
"connected" network (assuming old scan results are not current enough to
skip the scan completely). This allows the scan result to come back in
much faster time. In ath9k, the scan took around 12 seconds with full
background scan, and only 0.1 second with the single-channel single-ssid
scan. Thus, take much less time for the client to re-establish
connection with the currently "connected" network.

Signed-hostap: Peter Qiu <zqiu@chromium.org>
2014-03-11 19:38:01 +02:00
Michael Schaller
bdec7ee5c9 D-Bus: Add support to set pkcs11_{engine,module}_path
Add SetPKCS11EngineAndModulePath D-Bus method. Add PKCS11EnginePath
and PKCS11ModulePath D-Bus property getters.

Signed-hostap: Michael Schaller <misch@google.com>
2013-11-23 10:48:27 +02:00
Paul Stewart
cea97a04f9 dbus_new: Add DBus TDLS methods
Add DBus methods for TDLS operations similar to those available
for the control interface. This includes Discover, Setup, and
Teardown commands. While here, add a method to query the TDLS
link status and add a DBus method for it.

Tested with CONFIG_TDLS enabled, on a TDLS-enabled host and
peer capable of TDLS:

    dbus-send --system --dest=fi.w1.wpa_supplicant1 --print-reply \
        /fi/w1/wpa_supplicant1/Interfaces/0 \
        fi.w1.wpa_supplicant1.Interface.TDLSStatus string:<peer-mac-address>

    yields: string "peer does not exist"

    dbus-send --system --dest=fi.w1.wpa_supplicant1 --print-reply \
        /fi/w1/wpa_supplicant1/Interfaces/0 \
        fi.w1.wpa_supplicant1.Interface.TDLSDiscover string:<peer-mac-address>

    yields no error

    dbus-send --system --dest=fi.w1.wpa_supplicant1 --print-reply \
        /fi/w1/wpa_supplicant1/Interfaces/0 \
        fi.w1.wpa_supplicant1.Interface.TDLSSetup string:<peer-mac-address>

    yields no error

    dbus-send --system --dest=fi.w1.wpa_supplicant1 --print-reply \
        /fi/w1/wpa_supplicant1/Interfaces/0 \
        fi.w1.wpa_supplicant1.Interface.TDLSStatus string:<peer-mac-address>

    yields: string "connected" after TDLS completes

    dbus-send --system --dest=fi.w1.wpa_supplicant1 --print-reply \
        /fi/w1/wpa_supplicant1/Interfaces/0 \
        fi.w1.wpa_supplicant1.Interface.TDLSTeardown string:<peer-mac-address>

    yields no error

    dbus-send --system --dest=fi.w1.wpa_supplicant1 --print-reply \
        /fi/w1/wpa_supplicant1/Interfaces/0 \
        fi.w1.wpa_supplicant1.Interface.TDLSStatus string:<peer-mac-address>

    yields: string "peer not connected"

Signed-hostap: Paul Stewart <pstew@chromium.org>
2013-11-17 16:47:32 +02:00
Paul Stewart
754632c965 dbus_new: Add EAP logon/logoff
Add "EAPLogoff" and "EAPLogon" interface DBus commands which
parallel the "logoff" and "logon" wpa_ctrl commands which terminate
and restart EAP authentication.  Slightly enhance the "logon" case
by expiring any running "startWhile" timer.

Signed-hostap: Paul Stewart <pstew@chromium.org>
2013-04-23 17:57:55 +03:00
Sven Neumann
caff399250 dbus: Add getter for WPS properties
Add "WPS" property to the DBus interface that allows to
identify the active WPS method of a BSS.

Signed-hostap: Sven Neumann <s.neumann@raumfeld.com>
2012-11-03 18:38:51 +02:00
Dan Williams
1634ac0654 dbus: Add global capabilities property
Otherwise it's difficult to determine if the supplicant was built with
CONFIG_AP, CONFIG_IBSS_RSN, CONFIG_P2P, etc. CONFIG_AP and CONFIG_P2P
can be inferred from the introspection data of the Interface object,
but CONFIG_IBSS_RSN does not change the introspection data at all and
thus it's impossible to determine whether the supplicant supports it
without knowing its compile-time options.

Signed-hostap: Dan Williams <dcbw@redhat.com>
intended-for: hostap-1
2012-09-29 19:06:30 +03:00
Paul Stewart
6ed3117561 wpa_supplicant: Add DBus "Reassociate" command
Create a DBus command to reassociate, similar to the
ctrl-interface "reassociate" command.

Signed-hostap: Paul Stewart <pstew@chromium.org>
2012-08-09 13:54:36 +03:00
Jouni Malinen
c5a3cebfc8 Update license notification in D-Bus interface files
This updates these files to use the license notification that uses only
the BSD license. The changes were acknowledged by email (Dan Williams
<dcbw@redhat.com>, Sun, 01 Jul 2012 15:53:36 -0500).

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-07-02 12:04:38 +03:00
Gary Morain
0bb1e425b5 Export disconnect reason code to dbus
In the properties changed signal, added a new property
"DisconnectReason", which carries the IEEE 802.11 reason code of the
most recent disassociation or deauthentication event. The reason code is
negative if it is locally generated. The property is sent to the DBUS
immediately so as to prevent it from being coalesced with other
disconnect events.

Signed-off-by: Gary Morain <gmorain@chromium.org>
2012-06-30 16:43:50 +03:00
Tomasz Bursztyka
67892d5c0d D-Bus: Add AutoScan interface method to set/unset autoscan parameters
Signed-hostap: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2012-06-26 19:05:09 +03:00
Johannes Berg
2d43d37ff2 DBus: Add ability to report probe requests
Some applications require knowing about probe requests to identify
devices. This can be the case in AP mode to see the devices before they
connect, or even in P2P mode when operating as a P2P device to identify
non-P2P peers (P2P peers are identified via PeerFound signals).

As there are typically a lot of probe requests, require that an
interested application subscribes to this signal so the bus isn't always
flooded with these notifications. The notifications in DBus are then
unicast only to that application.

A small test script is also included.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2012-04-01 21:14:48 +03:00
Mukesh Agrawal
c6e86b63d2 Create DBus getter/setter for ScanInterval
Enable control of wpa_s->scan_interval via D-Bus. This parameter
controls the delay between successive scans for a suitable AP.

Also, update dbus.doxygen with ScanInterval, and some other
parameters that were undocumented.

Signed-hostap: Mukesh Agrawal <quiche@chromium.org>
2012-04-01 18:05:22 +03:00
Jayant Sane
96c4f3a707 dbus: utility to create dbus message from wpabuf array
If a wpabuf array is used to store basic typed data that we would like
to send over D-Bus then this utility will be of help when it places the
data in a variant with format aa? (array of an array of type ?, with ?
indicating any basic type).

Signed-hostap: Jayant Sane <jayant.sane@intel.com>
Signed-hostap: Angie Chinchilla <angie.v.chinchilla@intel.com>
intended-for: hostap-1
2012-02-25 10:45:17 +02:00
Paul Stewart
a4bbb6066d dbus: Create DBus getter/setter for FastReauth
Provide a means over DBus to set the conf->fast_reauth
property, which controls whether TLS session resumption
should be attempted for EAP-TLS 802.1X networks.

Signed-off-by: Paul Stewart <pstew@chromium.org>
2012-01-28 11:21:37 +02:00
Dan Williams
e9c3c1afed Implement control request replies for the D-Bus interface
Add a D-Bus mechanism for clients to respond to the NetworkRequest
signal.

Signed-off-by: Dan Williams <dcbw@redhat.com>
2011-10-30 12:04:24 +02:00
Dan Williams
6aeeb6fa21 dbus: clean up new D-Bus interface getters and setters
A number of fixes/improvements here:

1) Remove casting of getter/setter function types which allows
us to change the prototypes in the future and not have hard-to-find
runtime segfaults

2) Instead of having the getters create a fake reply message which
then gets its arguments copied into the real reply message, and is
then disposed, just pass message iters around and have them add
their arguments to the message itself

3) For setters, just pass in the message iter positioned at the
start of the argument list, instead of each setter having to skip
over the standard interface+property name

4) Convert error handling to use DBusError and return the error
back down through the call stacks to the function that will
actually send the error back to the caller, instead of having a
fake DBusMessage of type DBUS_MESSAGE_TYPE_ERROR that then
needs to have the error extracted from it.

But most of all, this fixes various segfaults (like rh #725517
and #678625) which were caused by some functions deep down in the
getter callpaths wanting a source DBusMessage* when the getters were
used for two things: signals (which don't have a source DBusMessage)
and methods (which will have a source DBusMessage that's being
replied to).  This duality made the code fragile when handling
errors like invalid IEs over the air.

Signed-off-by: Dan Williams <dcbw@redhat.com>
2011-07-29 21:25:39 +03:00
Jayant Sane
2855070673 P2P: More complete persistent group management over D-Bus
Extend commit c2762e410f to allow
applications to manage (add/remove) persistent groups and accepted
network object paths while invoking a persistent group.
2011-06-24 11:20:19 +03:00
Sam Leffler
9768da202b dbus: Add support to get/set the country code
Add an Interface.Country property and support to get/set the value.

Signed-off-by: Sam Leffler <sleffler@chromium.org>
2011-04-05 01:24:26 +03:00
Sam Leffler
78633c3709 wpa_supplicant: Parameterize BSS table expiration age + count
Replace compile-time BSS cache expiration age and scan count by config
parameters that can be set via wpa_cli and the new D-Bus API. The latter
is done with interface properties BSSExpireAge and BSSExpireCount.
2011-03-20 12:40:59 +02:00
Sam Leffler
7c49fdd0bd dbus: Add RemoveAllNetworks to the new D-Bus API
This adds a new command to the interface to remove all configured
netblocks. Without this it's necessary to query properties on the
interface and explicitly remove each netblock.
2011-03-20 12:12:12 +02:00
Sam Leffler
2b65b30da8 dbus: Add D-Bus methods to flush the BSS cache
Add an "Interface.FlushBSS" method to the new D-Bus API and a "flush"
method to the old API. Both take an age parameter that is a threshold
(in seconds) for selecting entries to evict. Setting this parameter
to zero flushes all entries from the cache.

This mechanism is useful for a connection manager to clear state at
startup and on resume (where the age parameter may be used to hold
onto recent/valid data).
2011-03-20 12:02:33 +02:00
Paul Stewart
ba6f267f64 dbus: Add D-Bus method for current authentication mode
Chooses between EAP and non-EAP authentication modes and
uses the appropriate method to retrieve the name.

Signed-off-by: Paul Stewart <pstew@google.com>
2011-03-15 13:53:56 +02:00
Witold Sowa
7899e2f42d dbus: Change WPA/RSNIE byte array props to dicts
Expose RSN and WPA properties for BSS objects containing information
about key management and cipher suites. Get rid of WPA/RSN/WPSIE
byte array properties and add IEs byte array property with all IE data
instead.
2010-01-16 16:37:37 +02:00
Witold Sowa
75d328af50 dbus: Change BSS property MaxRate to Rates
Instead of exposing maximum BSS bit rate, expose sorted array
of all supported rates.
2010-01-04 16:52:30 +02:00
Jouni Malinen
db9a76c032 dbus: Fix a typo in function name (invald -> invalid) 2010-01-01 21:52:29 +02:00
Witold Sowa
db9133acb2 dbus: Divide DebugParams property to three separate properties 2010-01-01 13:00:22 +02:00
Witold Sowa
58605c6e61 dbus: Replace BSS 'Properties' property with separate properties
In addition, remove Quality and Noise properties since the BSS table
is not the correct place for fetching per-channel information (Noise)
and Quality is not well-defined (nor available from many drivers).
2010-01-01 12:28:24 +02:00
Witold Sowa
fcea0b7d1d dbus: Add generic properties getter and setter 2010-01-01 11:56:56 +02:00
Jouni Malinen
ccd286d025 dbus: Use the new BSS table with the new D-Bus API
Replace the scan results -based implementation with the use of information
from the new BSS table maintained by wpa_supplicant to get a more stable
source of BSS data. Change the use of BSSID as the key for the BSS object
to use the BSS table unique identifier so that multi-SSID APs can be
handled properly.
2009-12-28 01:10:07 +02:00
Jouni Malinen
a206a29a54 dbus: Remove the confusing "ctrl_iface_" prefix from file names
The D-Bus interface does not really have anything to do with the
wpa_supplicant ctrl_iface interface and as such, this prefix in
dbus files is both confusing and unnecessarily. Make the file names
shorter by removing this prefix.
2009-12-20 21:11:35 +02:00
Renamed from wpa_supplicant/dbus/ctrl_iface_dbus_new_handlers.h (Browse further)