Commit graph

2044 commits

Author SHA1 Message Date
Jouni Malinen
36533aff3c tests: hostapd disconnecting STA without transmitting Deauth/Disassoc
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-04-09 00:30:49 +03:00
Jouni Malinen
6545398aaa tests: AP with open mode and STA statistics
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-04-09 00:30:49 +03:00
Jouni Malinen
2d3525bed4 tests: VENDOR_ELEM 14 to add an IE into Probe Request frame
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-04-09 00:30:49 +03:00
Ilan Peer
235c56e708 tests: Modify test_hs20_filter
Modify the test cases to tests the Hotspot 2.0 filtering functionality
in wpa_supplicant, instead of testing only the kernel interface.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2016-04-08 15:44:10 +03:00
Jouni Malinen
39881726d5 tests: RADIUS failure when adding MPPE keys
This is a regression test case for a radius_msg_add_mppe_keys() memory
leak on an error path.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-04-08 11:41:08 +03:00
Jouni Malinen
675c036fff tests: WPA2 with invalid PSK from RADIUS
This is a regression test case for a memory leak on a
decode_tunnel_passwords() error path.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-04-08 11:28:45 +03:00
Jouni Malinen
0307eebdb9 tests: Fix pyrad exception name in RADIUS test cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-04-08 11:28:19 +03:00
Jouni Malinen
601e55726c tests: Add P2P invitation coverage during p2p_find
The new persistent_group_peer_dropped3 test case is similar to
persistent_group_peer_dropped with the difference being in the
responding device (the one from which the persistent group information
is dropped) is not issued a separate P2P_LISTEN command and instead, a
single P2P_FIND is used through the exchange to verify that this
operation does not get stopped unexpectedly. This is a regression test
case to verify that P2P_PENDING_INVITATION_RESPONSE case ends up calling
p2p_check_after_scan_tx_continuation() in non-success case. It should be
noted that this is dependent on timing: Action frame TX request needs to
occur during the P2P_FIND Search phase (scan). As such, not every
execution of this test case will hit the previous issue sequence, but
that should be hit every now and then.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-04-07 21:10:10 +03:00
Janusz Dziedzic
41ba40e74d tests: Pass full apdev to add_ap() function (7)
Pass the full apdev to the add_ap() function instead of just ifname.
This allows us to handle also remote hosts while we can check
apdev['hostname'], apdev['port'].

This step (7) converts the cases where a local variable is used to store
apdev[#]['ifname'] before passing it as the argument to hostapd.add_ap().

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-04-03 22:46:14 +03:00
Janusz Dziedzic
eb2af30ac2 tests: Pass full apdev to add_ap() function (6)
Pass the full apdev to the add_ap() function instead of just ifname.
This allows us to handle also remote hosts while we can check
apdev['hostname'], apdev['port'].

This step (6) converts the cases where apdevs[#]['ifname'] was used as
the argument to hostapd.add_ap().

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-04-03 22:46:14 +03:00
Janusz Dziedzic
4a264a6fa1 tests: Pass full apdev to add_ap() function (5)
Pass the full apdev to the add_ap() function instead of just ifname.
This allows us to handle also remote hosts while we can check
apdev['hostname'], apdev['port'].

This step (5) converts the cases that use the start_ap_wpa2_psk() helper
function.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-04-03 22:46:14 +03:00
Janusz Dziedzic
afc26df29c tests: Pass full apdev to add_ap() function (4)
Pass the full apdev to the add_ap() function instead of just ifname.
This allows us to handle also remote hosts while we can check
apdev['hostname'], apdev['port'].

This step (4) converts the cases that call hostapd.add_ap() from a
helper function that got apdev[i] as an argument.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-04-03 22:46:12 +03:00
Janusz Dziedzic
5eee514de9 tests: Pass full apdev to add_ap() function (3)
Pass the full apdev to the add_ap() function instead of just ifname.
This allows us to handle also remote hosts while we can check
apdev['hostname'], apdev['port'].

This step (3) converts the cases that use the start_ap() helper
function.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-04-03 22:46:00 +03:00
Janusz Dziedzic
21aa8b7e3c tests: Pass full apdev to add_ap() function (2)
Pass the full apdev to the add_ap() function instead of just ifname.
This allows us to handle also remote hosts while we can check
apdev['hostname'], apdev['port'].

This step (2) converts the cases that use the add_ssdp_ap() helper
function.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-04-03 22:46:00 +03:00
Janusz Dziedzic
8b8a1864ff tests: Pass full apdev to add_ap() function (1)
Pass the full apdev to the add_ap() function instead of just ifname.
This allows us to handle also remote hosts while we can check
apdev['hostname'], apdev['port'].

This step (1) converts the cases where apdev[#]['ifname'] was used as
the argument to hostapd.add_ap().

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-04-03 22:45:57 +03:00
Janusz Dziedzic
78b8319317 tests: Allow full apdev to be passed to add_ap() function
This allows the full apdev dict to be passed to the add_ap() function
instead of just ifname. This allows us to handle also remote hosts while
we can check apdev['hostname'], apdev['port']. The old style ifname
argument is still accepted to avoid having to convert all callers in a
single commit.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-04-03 22:32:26 +03:00
Jouni Malinen
07f0da3003 tests: EAP-SIM fast reauth with no-change SET_NETWORK
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-03-31 17:19:12 +03:00
Jouni Malinen
51761ba297 tests: SAE and bignum failures
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-03-28 01:59:23 +03:00
Jouni Malinen
4f6985de09 tests: SAE and pwe failure
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-03-27 21:45:11 +03:00
Jouni Malinen
03aac597a0 tests: RADIUS accounting with various security cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-03-27 21:26:19 +03:00
Jouni Malinen
fe6e56a21a tests: Suite B error cases for PMKID and MIC derivation
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-03-27 21:08:56 +03:00
Jouni Malinen
2ca502dc73 tests: WNM BSS transition management with various PHY types
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-03-27 20:57:32 +03:00
Jouni Malinen
803d01901b tests: DFS CAC functionality on channel 104 HT40-
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-03-27 20:30:40 +03:00
Jouni Malinen
dd73d9a843 tests: AP Channel Switch - invalid channel
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-03-26 22:53:58 +02:00
Jouni Malinen
0215543103 tests: Information element parsing OOM
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-03-26 22:53:58 +02:00
Jouni Malinen
4d2c287466 tests: Information element parsing - extra coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-03-26 22:53:58 +02:00
Jouni Malinen
542c68a688 tests: QCA vendor element parsing
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-03-26 22:53:58 +02:00
Jouni Malinen
6849b3de8f tests: Invalid VHT 80 and 80+80 MHz configuration (seg0/seg1)
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-03-26 22:53:58 +02:00
Jouni Malinen
8742c81cc5 tests: HT40 co-ex scan and broken legacy/HT AP
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-03-26 22:53:58 +02:00
Jouni Malinen
ebd80f2d2e tests: HT40 on 5 GHz with disabled secondary channel
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-03-26 22:53:58 +02:00
Jouni Malinen
07a1e90487 tests: Fix FST cleanup if alloc_fail is not supported
The test cases fst_ap_start_session_oom and fst_setup_mbie_diff did not
clean up FST sessions properly in case alloc_fail failed due to missing
support for it in the build. This could result in abandoning attached
hostapd global control interface monitors and test case failures due to
the global control interface socket running out of output buffer.

Fix this by going through the cleanup steps even if alloc_fail raises
HwsimSkip exception.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-03-26 22:53:58 +02:00
Jouni Malinen
fb915d50fd tests: WNM BSS Transition Management and cfg80211 connect command
For now, this is not enforcing cfg80211 reassociation since the needed
changes do not yet exist in the upstream kernel. Once those changes are
accepted, the TODO note in the test case can be addressed.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-03-25 12:11:59 +02:00
Jouni Malinen
b495500fb1 tests: WNM BSS Transition Management and security mismatch
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-03-24 22:35:10 +02:00
Jouni Malinen
71666dc33a tests: Allow RC4-SHA failure in ap_wpa2_eap_fast_cipher_suites
This needs to be allowed with OpenSSL 1.1.0 since the RC4-based cipher
has been disabled by default.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-03-21 13:12:10 +02:00
Janusz Dziedzic
d4944fad72 tests: Improve debug logs in hostapd/wpasupplicant with remote commands
Show more info when we are using remote wpaspy and UDP-based control
interface.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-03-20 21:49:35 +02:00
Janusz Dziedzic
8ce4855b23 tests: hostapd.py/wpasupplicant.py use Host when executing commands
Execute commands using the Host class. This enables use of remote hosts
as well.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-03-20 21:49:26 +02:00
Janusz Dziedzic
2fa2671573 tests: Add remotehost.py and Host class
This class allows execution of commands on a remote hosts/machine. This
is based on ssh with authorized keys, so you should be able to execute
such commands without any password:

ssh <user>@<hostname> id

By default user is root.

Support for sync and async calls is included.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-03-20 21:49:24 +02:00
Jouni Malinen
557b52bf4a tests: Add CONFIG_VLAN_NETLINK=y to hostapd build configuration
This is needed for ap_vlan_tagged_wpa2_radius_id_change to pass. The
ioctl-based vlan_add() function does not use the vlan_if_name parameter
at all.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-03-20 19:54:57 +02:00
Jouni Malinen
5a34d359cd tests: Secure mesh network and PMKSA caching
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-03-20 18:24:29 +02:00
Jouni Malinen
865fa1e9ea tests: PMKSA cache control interface operations
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-03-20 18:06:03 +02:00
Jouni Malinen
2b5488a4e1 tests: Return result from WpaSupplicant::global_request() in all cases
The no self.global_iface case was not returning the result from the
self.request() case. While this is not really a path that is supposed to
be used, make it return the response since it is at least theoretically
possible to get here.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-03-20 11:08:12 +02:00
Jouni Malinen
8c9aa2bc8d tests: wpa_supplicant AP mode - open network and HT disabled
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-03-18 16:18:32 +02:00
Jouni Malinen
6c7fed4683 tests: EAP-SIM and check fast reauth with bssid change
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-03-16 19:46:27 +02:00
Jouni Malinen
8b29661192 tests: Accept "user@example.com" as user identity similarly to "user"
This is needed to allow updated Interworking behavior that adds the
realm to the EAP-Response/Identity value.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-03-11 21:06:15 +02:00
Jouni Malinen
71fd685fb8 tests: Set ocsp_stapling_response_multi in as2.conf
This keeps the as.conf and as2.conf more consistent.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-03-09 19:49:24 +02:00
Jouni Malinen
40ae4a2ff2 tests: Fix root_ocsp() for multi-OCSP test cases
Incorrect path and file name was used in the openssl command to generate
one of the OCSP responses. Also fix
ap_wpa2_eap_tls_intermediate_ca_ocsp_multi to expect success rather than
failure due to OCSP response. Based on the test description, this was
supposed to succeed, but apparently that root_ocsp() bug prevented this
from happening.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-03-09 19:48:35 +02:00
Johannes Berg
890fd60f7d tests: Add tests for HS 2.0 frame filtering
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-03-07 11:07:58 +02:00
Bob Copeland
fa7f9570f2 tests: Add a test for mesh gate forwarding
This test checks that mesh nodes forward frames for unknown
destinations to the mesh gates.

Signed-off-by: Bob Copeland <me@bobcopeland.com>
2016-03-07 11:05:22 +02:00
Jouni Malinen
dbd183c717 tests: D-Bus AssocStatusCode
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-03-06 20:54:16 +02:00
Janusz Dziedzic
c0ca24fc30 tests: Add hostapd.py helpers for various radio parameters
Add support for generating hostapd parameters for
b_only/g_only/a_only/HT20/HT40/VHT80.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-03-05 17:44:51 +02:00