Commit graph

2329 commits

Author SHA1 Message Date
Jouni Malinen
41c526f357 P2P: Fix snprintf buffer length for group ifname backup
Commit 2e5ba4b6d1 moved this to a function
and updated one of the os_snprintf() calls to use the len parameter, but
forgot the other one.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-24 21:22:30 +03:00
Naresh Jayaram
07041c6f99 eap_proxy: Confirm eap_proxy initialization before reading SIM info
Trying to access the SIM card details without checking if the eap_proxy
layer has been initialized can results in a crash. Address this by
sending the request for the IMSI through eapol_supp_sm.c which can
verify that eap_proxy has been initialized.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-23 20:51:39 +03:00
Po-Lun Lai
47d986e6ff P2P: Check Action frame payload match before accepted TX status
It is possible for there to be two pending off-channel TX frames, e.g.,
when two devices initiate GO Negotiation at more or less the same time.
This could result in the TX status report for the first frame clearing
wpa_s->pending_action_tx that included the newer frame that has not yet
been transmitted (i.e., is waiting to be sent out). Avoid losing that
frame by confirming that the TX status payload matches the pending frame
before clearing the pending frame and reporting the TX status callback.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-23 17:47:40 +03:00
Jouni Malinen
d259249762 Fix ENABLE_NETWORK not to reconnect in disconnected state
DISCONNECT followed by ENABLE_NETWORK ended up starting a scan for a new
connection due to wpa_supplicant_enable_one_network() setting
wpa_s->reassociate = 1. This was done regardless of wpa_s->disconnected
being 1 which should imply that wpa_supplicant should not try to connect
before asked explicitly with REASSOCIATE or RECONNECT.

Fix this by making ENABLE_NETWORK setting of reassociate = 1 and
starting of scans for connection conditional on wpa_s->disconnected ==
0. This will make ENABLE_NETWORK trigger a connection only if
wpa_supplicant is already in a state where it would try to connect if
there are any enabled networks.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-23 12:09:46 +03:00
Jouni Malinen
af8a827b90 Make frequency range list routines more general
This allows the frequency range list implementation to be shared for
other purposes.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-23 00:44:07 +03:00
Dan Williams
538922a628 dbus: Add boolean AllowRoam option to Scan() method options dictionary
To disallow roaming when a scan request's results are read, callers
of the D-Bus Scan() method may add a new "AllowRoam" boolean key
to the scan options dictionary and set that key's value to FALSE.

Signed-hostap: Dan Williams <dcbw@redhat.com>
2013-10-22 16:09:46 +03:00
Pontus Fuchs
c6f5dec9c1 Don't start second scan when changing scan interval
If a scan is currently running and the scan interval is changed, a
second scan will be started before the current has finished. This will
in turn, if no networks are configured, cause wpa_s->state to be
forced to WPA_INACTIVE before the first scan has finished.

Signed-hostap: Pontus Fuchs <pontus.fuchs@gmail.com>
2013-10-22 15:57:21 +03:00
Jouni Malinen
313424d46e GAS: Add support for multiple pending queries for the same destination
Need to use the pointer to the current ongoing query instead of matching
from the pending list based on the destination address so that we get
the correct query instance when processing the TX status report.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-21 14:37:37 +03:00
Jouni Malinen
cbc5484892 GAS: Do not start new scan operation during an ongoing GAS query
These operations can have conflicting offchannel requirements, so wait
with a new scan trigger until a pending GAS query has been completed.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-21 13:20:38 +03:00
Kyeyoon Park
c377514337 GAS: Delay GAS query Tx while scanning/connecting
Offchannel operations needed for a GAS query can conflict with ongoing
scan/connection progress, so delay GAS queries if such an operation is
in progress on the current interface or any virtual interface sharing
the same radio.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-21 13:15:45 +03:00
Kyeyoon Park
24c694b465 GAS: Delay GAS query Tx while another query is in progress
It would be possible to issue another GAS query when a previous one is
still in progress and this could result in conflicting offchannel
operations. Prevent that by delaying GAS query initiation until the
previous operation has been completed.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-21 13:13:42 +03:00
Jouni Malinen
7255983b59 WPS: Clear after_wps from number of new locations
This makes it less likely to forget WPS single-channel scan optimization
in effect after having completed the WPS operation or in case WPS
operating gets cancelled.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-10-20 21:38:02 +03:00
Jouni Malinen
73b54d63fc P2P: Fix Operating Channel in Invitation Request for operating group
When a GO or P2P Client invites a peer device to join an already
operating group, the Operating Channel in Invitation Request needs to be
forced to the current operating channel of the group.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-10-20 21:38:02 +03:00
Jouni Malinen
0c92963656 D-Bus: Clean up debug print for P2P invitation result
wpa_printf() does not need '\n' so remove the extra newline. In
addition, drop the priority of this message from MSG_INFO to MSG_DEBUG
since this is in no way exceptional operation.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-10-20 21:38:02 +03:00
Jouni Malinen
d2858883b0 P2P: Add GO BSS entry details to debug log on join-a-group
This makes it easier to debug issues related to selecting GO information
from the latest updated BSS table entry.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-10-20 21:38:01 +03:00
Jouni Malinen
e241b1b4f2 eap_proxy: Fix IMSI fetch for home vs. visited network determination
Use similar mechanism to CONFIG_PCSC=y case to set the IMSI and MNC
length for eap_proxy. This allows automatic 3GPP realm comparison
against the domain list.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-10-20 13:12:04 +03:00
Jouni Malinen
a5d44ac083 EAP peer: Add framework for external SIM/USIM processing
The new configuration parameter external_sim=<0/1> can now be used to
configure wpa_supplicant to use external SIM/USIM processing (e.g., GSM
authentication for EAP-SIM or UMTS authentication for EAP-AKA). The
requests and responses for such operations are sent over the ctrl_iface
CTRL-REQ-SIM and CTRL-RSP-SIM commands similarly to the existing
password query mechanism.

Changes to the EAP methods to use this new mechanism will be added in
separate commits.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-10-20 13:12:04 +03:00
Jouni Malinen
7e8bc7d6fb eapol_test: Initialize BSS lists
This is needed to avoid issues with control interface commands that
could request BSS list during an eapol_test run. wpa_cli tries to update
its internal BSS list and that could trigger eapol_test crashes without
this.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-10-19 16:28:56 +03:00
Jouni Malinen
bceb843108 Send CTRL-RSP command response before processing EAPOL update
This is what the original implementation did years ago, but the move to
using separate control interface backends re-ordered the implementation
to process EAPOL notification first. Use a registered timeout to allow
the ctrl_iface response to be sent out first to get somewhat faster
response time and to avoid pending operations that could result in
ctrl_iface response and unsolicited event messages from getting mixed
up.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-10-19 16:26:01 +03:00
Jouni Malinen
b6077964c2 eapol_test: Fix external EAP request mechanism
The eap_param_needed callback was forgotten from eapol_test and this
prevented external EAP request processing through ctrl_iface from being
tested.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-10-19 13:44:39 +03:00
Jouni Malinen
94de082b39 eapol_test: Initialize wpa_s->global to fix ctrl_iface
wpa_s->global is now dereferenced in number of places and at least one
of them hits in eapol_test cases. Fix issues with this by setting the
global pointer to empty data.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-10-19 13:08:37 +03:00
Jouni Malinen
f07bba3255 Android: Add dfs.c into build
This fixes Android build after commit
e76da50529 that added the new dfs.c file.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-18 15:18:40 +03:00
Jouni Malinen
f47c145285 Interworking: Add required_roaming_consortium parameter for credentials
This allows credentials to be limited from being used to connect to a
network unless the AP advertises a matching roaming consortium OI.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-18 14:13:45 +03:00
Jouni Malinen
a83e5749ac GAS: Update timeout from TX status handler
This allow GAS operations to be fine-tuned based what happens with GAS
query TX. Failed queries are timed out immediately and acknowledged
queries are given some more time to account for possible TX queue
latencies.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-18 14:13:45 +03:00
Jouni Malinen
56f5af489c Interworking: Add support for QoS Mapping functionality for the STA
Indicate support for QoS Mapping and configure driver to update the QoS
Map if QoS Map Set elements is received from the AP either in
(Re)Association Response or QoS Map Configure frame.

This commit adds support for receiving the frames with nl80211 drivers,
but the actual QoS Map configuration command is still missing.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-18 14:13:45 +03:00
Jouni Malinen
ac1bc54948 Interworking: Add domain_suffix_match for credentials
This allow domain_suffix_match to be specified for a cred block and then
get this copied for the network blocks generated from this credential as
part of Interworking network selection.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-18 14:13:45 +03:00
Jouni Malinen
463c8ffbd5 Interworking: Add support for multiple home FQDNs
Credentials can now be configured with more than one FQDN ('domain'
field in the cred block) to perform Domain Name List matching against
multiple home domains.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-18 14:13:45 +03:00
Jouni Malinen
01f809c7db Add AAA server domain name suffix matching constraint
The new domain_suffix_match (and domain_suffix_match2 for Phase 2
EAP-TLS) can now be used to specify an additional constraint for the
server certificate domain name. If set, one of the dNSName values (or if
no dNSName is present, one of the commonName values) in the certificate
must have a suffix match with the specified value. Suffix match is done
based on full domain name labels, i.e., "example.com" matches
"test.example.com" but not "test-example.com".

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-18 13:34:26 +03:00
Janusz Dziedzic
e76da50529 hostapd: Add AP DFS support
Add DFS structures/events handlers, CAC handling, and radar detection.
By default, after radar is detected or the channel became unavailable, a
random channel will be chosen.

This patches are based on the original work by Boris Presman and
Victor Goldenshtein. Most of the DFS code is moved to a new dfs.c/dfs.h
files.

Cc: Boris Presman <boris.presman@ti.com>
Cc: Victor Goldenshtein <victorg@ti.com>

Signed-hostap: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-hostap: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2013-10-17 21:05:15 +03:00
Pontus Fuchs
5079392954 Increase buffer size and prevent write beyond buffer end
wpa_config_write_key_mgmt has a buffer size of 50. This is not enough
to fit the longest case. I used a network with "WPA-PSK WPA-EAP
WPA-NONE" and CONFIG_IEEE80211R=y + CONFIG_IEEE80211W=y to produce
a string longer than 50 chars. Increase the buffer size to 100 to
prevent truncated output.

Truncated output is not the only problem. If the buffer end is
reached when adding certain key mgmt types the function does not
return immediately. This leaves pos > end. When a second os_sprintf
is called the calculation of end - pos yields a large positive
number for buffer size. End result is a write beyond the buffer end.
Fix this by bailing out if buffer end is reached.

Signed-hostap: Pontus Fuchs <pontus.fuchs@gmail.com>
2013-10-14 20:49:26 +03:00
Jithu Jance
7e910b7b51 WPS NFC: Cancel scheduled scan before attempting a scan
Cancel scheduled scan (if any) before attempting to scan for the newly
received configuration/credential in WPS NFC Config token case.

Signed-hostap: Jithu Jance <jithu@broadcom.com>
2013-10-14 20:42:27 +03:00
Jouni Malinen
b72e14e599 P2P: Do not allow P2P client connection without P2P IE from GO
P2P-GROUP-STARTED event depends on having enough information about the
group available. To avoid incomplete information from being delivered to
upper layers, do not accept scan results without P2P IE (e.g., from a
non-P2P scan) for P2P client association process. This can be of use for
some join-a-group cases where non-P2P scans have generated the BSS entry
for the GO.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-14 19:41:23 +03:00
Jouni Malinen
5df7414b04 P2P: Allow persistent group determination based on Beacon frame
P2P IE may be available from a Beacon frame from a GO even if we have
not yet received a Probe Response frame with P2P IE from that GO. Since
all the needed information for determining the GO's P2P Device Address
and group capabilities are available, use that information instead of
displaying incomplete group information.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-14 19:28:00 +03:00
Jouni Malinen
aaeb9c98e6 P2P: Allow GO to be discovered based on Beacon frame
This fixes some P2P-join-a-group cases where GO may have been discovered
based on passive scan or non-P2P scan. P2P IEs may have been received
from a Beacon frame in such a case and that information can be used to
create a P2P peer entry, e.g., to allow provision discovery exchange to
be completed.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-14 19:25:28 +03:00
Jouni Malinen
b16696ff72 P2P: Show p2p flag in debug info for scan results
This makes it easier to confirm that P2P capabilities for a GO has been
discovered properly.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-14 19:23:38 +03:00
Jouni Malinen
bb50ae4396 P2P: Show P2P flag in BSS entries also based on Beacon frames
It is possible that a P2P GO has been discovered through a non-P2P scan
that did not return P2P IE in Probe Response frames. To cover those
cases, check also Beacon frame (if received) for P2P IE.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-14 19:22:09 +03:00
Jouni Malinen
ff57398fca P2P: Do not drop P2P IEs from BSS table on non-P2P scans
This could happen when non-P2P station interface runs a scan without P2P
IE in the Probe Request frame. P2P GO would reply to that with a Probe
Response that does not include P2P IE. Do not update the IEs in this BSS
entry to avoid such loss of information that may be needed for P2P
operations to determine group information.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-14 17:34:41 +03:00
Jouni Malinen
adeb4f59a2 P2P: Make sure wait for the first client gets stopped
If a group was removed before the wait for the first client had timed
out and the client had not yet connected, p2p_go_wait_client could have
been left set and with that, scan operations could be unnecessarily
delayed. This fixes some undesired delays from commit
c1c0b35fea.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-10-05 22:15:28 -07:00
Dmitry Shmidt
f22f274bbf P2P: Clone 'disable_scan_offload' parameter for p2p group
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2013-10-05 18:18:20 -07:00
Deepthi Gowri
acdd0fc84f P2P: Clear p2p_group_formation and p2p_in_provisioning on group removal
Commit 41f853235f extends group formation
timeout for the first data connection to complete and resets
p2p_go_group_formation_completed flag due to which p2p_in_provisioning
and p2p_group_formation flags are not cleared when
wpas_group_formation_completed() is called. This can result in both
station scan and p2p_find failures in the case where separate P2P group
interface is not used and the client does not complete 4-way handshake.
Fix this by clearing p2p_group_formation and p2p_in_provisioning when
such a P2P group is deleted.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-05 17:54:52 -07:00
Arif Hussain
8b3b803ab9 Include Extended Capabilities element based on scan results
Add Extended Capabilities element to association request only if the AP
included this element in Beacon/Probe Response frames. This is a
workaround to address interoperability issues with some older APs that
do not seem to be able to handle Extended Capabilities element in
(Re)Association Request frames.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-02 08:09:05 -07:00
Deepthi Gowri
6903ee6f62 P2P Extend postponing of concurrent scans for persistent GO
Update the p2p_go_wait_client timestamp in p2p_go_configured() to
address the case where the group is set up without the provisioning
step.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-02 07:32:17 -07:00
Sunil Dutt
f130b105ec TDLS: Clean up wpa_tdls_teardown_link() uses
Making this function be used only for external setup case simplifies the
implementation and makes core wpa_supplicant calls in ctrl_iface.c and
events.c consistent.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-09-30 17:10:18 +03:00
Jouni Malinen
5388dc97e0 Document use of Linux capabilities instead of privileged process
Linux capabilities cap_net_admin and cap_net_raw can be used to replace
need for running wpa_supplicant as a root process.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-29 12:04:40 +03:00
Jouni Malinen
a771c07dfc Add driver status information to control interface
STATUS-DRIVER command can now be used to fetch driver interface status
information. This is mainly for exporting low-level driver interface
information for debug purposes.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-28 17:19:30 +03:00
Jouni Malinen
298f51857d Get rid of compiler warning in no-CONFIG_CTRL_IFACE builds
no_ctrl_interface parsing was declared within ifdef CONFIG_CTRL_IFACE
block, so the parser function needs to be marked similarly.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-27 23:42:37 +03:00
Jouni Malinen
ea61aa1de1 Add no_ctrl_interface config param to clear ctrl_interface
This can be used to override previously set ctrl_interface value in a
way that clears the variable to NULL instead of empty string. The only
real use case for this is to disable per-interface ctrl_interface from
the additional control file (-I<file>) in case ctrl_interface was set in
the main configuration file. It should be noted that zero-length
ctrl_interface parameter can be used to initiate some control interface
backends, so simpler designs were not available for this.

The format of the new parameter is not exactly cleanest due to
configuration file parsing assumptions. For example:

ctrl_interface=....
no_ctrl_interface=

would end up with ctrl_interface=NULL.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-09-27 23:34:35 +03:00
Jouni Malinen
25b65a142d Make sure updated BSS entry does not get added twice to the list
When the BSS table is being updated based on new scan results, a BSS
entry could end up getting added into last_scan_res list multiple times
if the scan results from the driver includes duplicated values. This
should not happen with driver_nl80211.c since it filter outs duplicates,
but in theory, other driver wrappers could indicate such scan results.
Anyway, it is safer to make sure this cannot happen by explicitly
verifying the last_scan_res list before adding an updated BSS entry
there. A duplicated entry in the list could potentially result in freed
memory being used if there is large enough number of BSSes in the scan
results to cause removal of old BSS entries.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-09-27 16:00:50 +03:00
Jouni Malinen
a3cbf82e6d Fix possible freed-memory use in BSS table updates
If there are large number of BSSes in the scan results, BSS table update
could have added a BSS entry to the last_scan_res in a case where that
BSS entry got just deleted. This would happen only if there are more
than bss_max_count (by default 200) BSSes and if at least bss_max_count
of those BSSes are known (match a configured network). In such a case,
wpa_bss_add() could end up allocating a new BSS entry and return a
pointer to that entry even if it was the one that ended up getting freed
to keep the BSS table length within the limit. This could result in
freed memory being used and the process crashing (likely with segfault)
when trying to access information from that BSS entry.

Fix the issue by removing the oldest BSS entry before linking the new
entry to the table. This makes sure the newly added entry will never get
picked up as the one to be deleted immediately.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-09-27 15:56:06 +03:00
Jouni Malinen
bbc6c729a5 P2P: Use group formation timeout on persistent group GO
Previously, GO considered the group to be fully re-invoked after
starting beaconing on successful invitation exchange. This would leave
the group running until idle timeout (which may not be enabled) or
explicit removal if the client fails to connect for any reason. Since
the client is expected to connect immediately after the invitation
exchange that ends with status=0 (i.e., either client initiated the
exchange or it responded with success), extend group formation timeout
to cover that period until the first successfully completed data
connection. This allows the GO to remove the group automatically if the
client devices does not connect within
P2P_MAX_INITIAL_CONN_WAIT_GO_REINVOKE (15) seconds.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-09-26 21:24:09 +03:00