Commit graph

15122 commits

Author SHA1 Message Date
Jesus Fernandez Manzano
305369038b wpa_supplicant: Fix arithmetic on void pointer
When using void pointers in calculations, the behavior is undefined.
Arithmetic operations on 'void *' is a GNU C extension,
which defines the 'sizeof(void)' to be 1.

This change improves portability of the code.

Signed-off-by: Jesus Fernandez Manzano <jesus.manzano@galgus.net>
2019-10-25 19:29:53 +03:00
Jesus Fernandez Manzano
00ddc1cc21 common: Fix same expression checked twice in fils_key_auth_sk()
Signed-off-by: Jesus Fernandez Manzano <jesus.manzano@galgus.net>
2019-10-25 19:29:53 +03:00
Pradeep Kumar Chitrapu
0a809529d0 tests: HE AP Functionality
Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
2019-10-25 19:29:53 +03:00
Pradeep Kumar Chitrapu
327d09aa03 HE: Add 11ax info to ap mode ctrl iface STATUS command
Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
2019-10-25 19:29:53 +03:00
Jouni Malinen
d7678a0842 Fix AP Extended Capability length determination
The IE minimum length determination in hostapd_eid_ext_capab() was not
fully up to date with the hostapd_ext_capab_byte() conditions. This
could result in omitting some of the capability octets depending on
configuration. Fix this by adding the missing conditions.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-25 16:03:37 +03:00
Jimmy Chen
a592f2a9ea P2P: Continue listening next request if no post-PD operations
If there are no post-provision discovery operations, we should continue
in find mode to avoid getting the p2p_find operation stopped (stuck in
SEARCH state) unexpectedly.

Signed-off-by: Jimmy Chen <jimmycmchen@google.com>
2019-10-25 16:03:37 +03:00
Brian Norris
a32acf3918 Fix hostapd build with CONFIG_WPA_TRACE but no CONFIG_WPA_TRACE_BFD
Otherwise, we may get linker failures:

  ld.lld: error: unable to find library -lbfd

While we're at it, pull in the library selection fixes from commit
848905b12a ("Avoid undefined references with CONFIG_WPA_TRACE_BFD=y").

Signed-off-by: Brian Norris <briannorris@chromium.org>
2019-10-25 16:03:37 +03:00
Masashi Honma
b38c8c9cb2 dbus: Suppress to show NULL string
wpa_s->dbus_groupobj_path is always NULL so suppress to show it.
This was found by gcc 9.2.1 warning.

dbus/dbus_new.c: In function ‘wpas_dbus_unregister_p2p_group’:
dbus/dbus_new.c:4793:3: warning: ‘%s’ directive argument is null [-Wformat-overflow=]
 4793 |   wpa_printf(MSG_DEBUG,
      |   ^~~~~~~~~~~~~~~~~~~~~
 4794 |       "%s: Group object '%s' already unregistered",
      |       ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 4795 |       __func__, wpa_s->dbus_groupobj_path);
      |       ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2019-10-25 16:03:37 +03:00
Masashi Honma
6807eee9ca Interworking: Check NULL string to avoid compiler warning
Fix warning by gcc 9.2.1.

interworking.c: In function ‘interworking_home_sp_cred’:
interworking.c:2263:3: warning: ‘%s’ directive argument is null [-Wformat-overflow=]
 2263 |   wpa_msg(wpa_s, MSG_DEBUG,
      |   ^~~~~~~~~~~~~~~~~~~~~~~~~
 2264 |    "Interworking: Search for match with SIM/USIM domain %s",
      |    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 2265 |    realm);
      |    ~~~~~~

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2019-10-25 16:03:37 +03:00
Phil Wise
ec1c0d1548 Fix name of DBus interface in defconfig
Signed-off-by: Phil Wise <phil@phil-wise.com>
2019-10-25 16:03:37 +03:00
Jouni Malinen
360d8d4e3c tests: Make ap_ft_ap_oom4 more robust against compiler optimizations
It looks like the wpa_auth_get_seqnum() function might not always be
visible in the backtrace since the compiler may optimize that wrapper
away. Use the i802_get_seqnum() function instead as a trigger for the
get_seqnum operation failure trigger to avoid this.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-10-19 00:45:57 +03:00
Jouni Malinen
f73dd0a692 FT-SAE: Add RSNXE into FT MIC
Protect RSNXE, if present, in FT Reassociation Request/Response frames.
This is needed for SAE H2E with FT.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-18 16:20:27 +03:00
Jouni Malinen
cb99259775 Add RSNXE into (Re)Association Response frames
Add the new RSNXE into (Re)Association Response frames if any of the
capability bits is nonzero.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-18 15:49:32 +03:00
Jouni Malinen
30628e0d2d tests: WPA2-PSK-FT-SAE AP (H2E)
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-18 15:33:14 +03:00
Jouni Malinen
865721c695 Merge wpa_supplicant and hostapd EAPOL-Key KDE parsers
Use a single struct definition and a single shared implementation for
parsing EAPOL-Key KDEs and IEs instead of maintaining more or less
identical functionality separately for wpa_supplicant and hostapd.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-18 13:02:27 +03:00
Jouni Malinen
898b6d58f3 SAE: Verify that STA negotiated H2E if it claims to support it
If a STA indicates support for SAE H2E in RSNXE and H2E is enabled in
the AP configuration, require H2E to be used.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-18 12:48:28 +03:00
Jouni Malinen
74866f5378 RSN: Verify RSNXE match between (Re)AssocReq and EAPOL-Key msg 2/4
If the STA advertises RSN Extension element, it has to be advertised
consistently in the unprotected ((Re)Association Request) and protected
(EAPOL-Key msg 2/4) frames. Verify that this is the case.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-18 00:20:29 +03:00
Jouni Malinen
9981d5bf31 Add RSNXE into AP KDE parser
This is needed for SAE hash-to-element implementation.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-18 00:20:29 +03:00
Jouni Malinen
d3516cad7a Store a copy of Association Request RSNXE in AP mode for later use
This is needed to be able to compare the received RSNXE to a protected
version in EAPOL-Key msg 2/4.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-18 00:20:29 +03:00
Jouni Malinen
6d6c887751 SAE: Add RSNXE in Association Request and EAPOL-Key msg 2/4
Add the new RSNXE into (Re)Association Request frames and EAPOL-Key msg
2/4 when using SAE with hash-to-element mechanism enabled. This allows
the AP to verify that there was no downgrade attack when both PWE
derivation mechanisms are enabled.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-17 16:54:05 +03:00
Jouni Malinen
8401cdc8d4 Add RSNXE into IE parser
This is needed for SAE hash-to-element implementation.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-17 16:53:09 +03:00
Jouni Malinen
0b0ed907d1 WPS: Check SHA256 result success
These functions can fail in theory, so verify they succeeded before
comparing the hash values.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-15 15:41:13 +03:00
Shiva Sankar Gajula
8dda97c758 QCA vendor command for adding a STA node
Add a QCA vendor subcommand QCA_NL80211_VENDOR_SUBCMD_ADD_STA_NODE with
attributes qca_wlan_vendor_attr_add_sta_node_params to add STA peer
entries in AP mode. This vendor sub command is used in FT roaming
scenario to send STA node information from application/service to
driver/firmware. The attributes defined in enum
qca_wlan_vendor_attr_add_sta_node_params are used to deliver the
parameters.

Signed-off-by: Shiva Sankar Gajula <sgajula@codeaurora.org>
2019-10-15 15:39:22 +03:00
Subrat Dash
b41dc61afa Add a new QCA vendor attribute to carry device info for OEM data
The OEM data binary blobs from application/service will be routed to the
appropriate device based on this attribute value. This optional
attribute is used to specify whether the device type is virtual or
physical. This attribute can be omitted when the command is for a
virtual device.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-15 15:39:22 +03:00
Edayilliam Jayadev
bf185bfd5d QCA vendor attributes to indicate BW-based agile spectral capability
Some chipsets don't have the capability to run agile spectral scan with
160/80+80 MHz modes. Add separate agile spectral scanning capability
flags for 160, 80+80, and non-160 MHz modes to cover such cases.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-15 15:39:22 +03:00
Sunil Dutt
1317ea2c0e nl80211: Allow external auth based on SAE/FT-SAE key mgmt
In the SME-in-driver case, wpa_supplicant used only the selected SAE
auth_alg value as the trigger for enabling external authentication
support for SAE. This prevented the driver from falling back to full SAE
authentication if PMKSA caching was attempted (Open auth_alg selected)
and the cached PMKID had been dropped.

Enable external auth based on SAE/FT-SAE key_mgmt, rather than doing
this based on SAE auth_alg, so that the driver can go through full SAE
authentication in cases where PMKSA caching is attempted and it fails.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-15 15:39:22 +03:00
Dedy Lansky
cdb5774f42 FST: Update FST about MAC address change
Notify FST module upon MAC address change. FST module will update the
Multiband IE accordingly.

Signed-off-by: Dedy Lansky <dlansky@codeaurora.org>
2019-10-15 15:39:22 +03:00
Andrei Otcheretianski
49e95ee1ee AP: Publish only HE capabilities and operation IEs on 6 GHz band
When operating on the 6 GHz band, add 6 GHz Operation Information inside
the HE Operation element and don't publish HT/VHT IEs.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>

- Replace HOSTAPD_MODE_IEEE80211AX mode checks with is_6ghz_op_class()

Signed-off-by: Vamsi Krishna <vamsin@codeaurora.org>
2019-10-15 15:39:22 +03:00
Andrei Otcheretianski
d7c2c5c98c AP: Add initial support for 6 GHz band
Add support for new hardware mode for 6 GHz band. 6 GHz operation is
defined in IEEE P802.11ax/D4.3. 6 GHz band adds global operating classes
131-135 that define channels in frequency range from 5940 MHz to 7105
MHz.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>

- Remove HOSTAPD_MODE_IEEE80211AX mode
- Replace check for HOSTAPD_MODE_IEEE80211AX with is_6ghz_freq()
- Move center_idx_to_bw_6ghz() to ieee802_11_common.c file

Signed-off-by: Vamsi Krishna <vamsin@codeaurora.org>
2019-10-15 15:39:22 +03:00
Liangwei Dong
a5b2faa714 AP: Add op_class config item to specify 6 GHz channels uniquely
Add hostapd config option "op_class" for fixed channel selection along
with existing "channel" option. "op_class" and "channel" config options
together can specify channels across 2.4 GHz, 5 GHz, and 6 GHz bands
uniquely.

Signed-off-by: Liangwei Dong <liangwei@codeaurora.org>
Signed-off-by: Vamsi Krishna <vamsin@codeaurora.org>
2019-10-15 15:39:22 +03:00
Jouni Malinen
89450024a8 wpa_supplicant: Pass in operating class for channel validity checks
This is needed to allow the 6 GHz operating classes to be compared
against the driver support channels since the channel numbers are not
really unique identifiers of a channel even within a single band.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-15 15:39:22 +03:00
Jouni Malinen
3fa701b5ce tests: SAE PWE derivation methods
Verify behavior with sae_pwe configuration values 0..2, i.e., test the
new hash-to-element mechanism for deriving PWE and negotiation for which
method to use.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-15 15:39:22 +03:00
Jouni Malinen
032c8264d4 SAE: Check that peer's rejected groups are not enabled in AP
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-15 15:39:22 +03:00
Jouni Malinen
a5dc2a5c1a SAE: H2E version of SAE commit message handling for AP
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-15 15:39:22 +03:00
Jouni Malinen
43b20b4370 SAE: Derive H2E PT in AP when starting the AP
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-15 15:39:22 +03:00
Jouni Malinen
444d76f74f SAE: Check that peer's rejected groups are not enabled
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-15 15:39:22 +03:00
Jouni Malinen
cfe1ea5c9c SAE: H2E version of SAE commit message handling for STA
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-15 15:39:22 +03:00
Jouni Malinen
447cd5f2df SAE: Collect list of rejected groups for H2E in STA
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-15 15:39:22 +03:00
Jouni Malinen
05a2fb0d11 SAE: Derive H2E PT in STA before connection
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-15 15:39:22 +03:00
Jouni Malinen
146889e3ca RSN: Verify RSNXE match between Beacon/ProbeResp and EAPOL-Key msg 3/4
If the AP advertises RSN Extension element, it has to be advertised
consistently in the unprotected (Beacon and Probe Response) and
protected (EAPOL-Key msg 3/4) frames. Verify that this is the case.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-15 15:39:22 +03:00
Jouni Malinen
3134bb13a8 SAE: Advertise Extended RSN Capabilities when H2E is enabled
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-15 15:39:22 +03:00
Jouni Malinen
293a01f3b3 SAE: Handle BSS membership selector indication for H2E-only in STA mode
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-15 15:39:22 +03:00
Jouni Malinen
cc0da0ff4c SAE: Advertise BSS membership selector for H2E-only case
If hostapd is configured to enable only the hash-to-element version of
SAE PWE derivation (sae_pwe=1), advertise BSS membership selector to
indicate this.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-15 15:39:22 +03:00
Jouni Malinen
85e64e634d SAE: Add sae_pwe configuration parameter for wpa_supplicant
This parameter can be used to specify which PWE derivation mechanism(s)
is enabled. This commit is only introducing the new parameter; actual
use of it will be address in separate commits.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-15 15:39:22 +03:00
Jouni Malinen
a36e13a7cd SAE: Add sae_pwe configuration parameter for hostapd
This parameter can be used to specify which PWE derivation mechanism(s)
is enabled. This commit is only introducing the new parameter; actual
use of it will be address in separate commits.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-15 15:39:22 +03:00
Jouni Malinen
af4487148a tests: Module test for SAE hash-to-element crypto routines
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-15 15:39:22 +03:00
Jouni Malinen
cf84246ebb SAE: Add Rejected Groups element into H2E Commit
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-15 15:39:22 +03:00
Jouni Malinen
efd4285299 SAE: Hash algorithm selection for H2E KCK/CN()
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-15 15:39:19 +03:00
Jouni Malinen
aeb022f8e5 SAE: Implement hash-to-element PT/PWE crypto routines
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-15 15:01:53 +03:00
Jouni Malinen
ecd7114072 SAE: Parse Rejected Groups element from H2E SAE commit
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-14 19:38:41 +03:00