Commit graph

2634 commits

Author SHA1 Message Date
Jouni Malinen
51e9f22809 P2P: Add option to allow additional client channels
The new p2p_add_cli_chan=1 configuration parameter can be used to
request passive-scan channels to be included in P2P channel lists for
cases where the local end may become the P2P client in a group. This
allows more options for the peer to use channels, e.g., if the local
device is not aware of its current location and has marked most channels
to require passive scanning.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-26 17:49:10 +03:00
Jouni Malinen
556b30daca P2P: Add option to remove channels from GO use
The new p2p_no_go_freq frequency range list (comma-separated list of
min-max frequency ranges in MHz) can now be used to configure channels
on which the local device is not allowed to operate as a GO, but on
which that device can be a P2P Client. These channels are left in the
P2P Channel List in GO Negotiation to allow the peer device to select
one of the channels for the cases where the peer becomes the GO. The
local end will remove these channels from consideration if it becomes
the GO.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-26 17:49:10 +03:00
Jouni Malinen
e7ecab4a3b Use ARRAY_SIZE() macro
Replace the common sizeof(a)/sizeof(a[0]) constructions with a more
readable version.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-10-26 17:49:05 +03:00
Jouni Malinen
29179b881e Stop ctrl_iface monitor send loop on reinit failure
There is no point trying to continue sending messages with sendmsg() if
socket reinitialization fails.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-10-26 15:55:59 +03:00
Jouni Malinen
a2a535f897 Remove unnecessary wpa_s->conf checks
wpa_s->conf cannot be NULL because wpa_supplicant_init_iface() would not
allow wpa_supplicant_add_iface() to return wpa_s instance in such state.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-10-26 15:55:52 +03:00
Jouni Malinen
41c526f357 P2P: Fix snprintf buffer length for group ifname backup
Commit 2e5ba4b6d1 moved this to a function
and updated one of the os_snprintf() calls to use the len parameter, but
forgot the other one.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-24 21:22:30 +03:00
Naresh Jayaram
07041c6f99 eap_proxy: Confirm eap_proxy initialization before reading SIM info
Trying to access the SIM card details without checking if the eap_proxy
layer has been initialized can results in a crash. Address this by
sending the request for the IMSI through eapol_supp_sm.c which can
verify that eap_proxy has been initialized.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-23 20:51:39 +03:00
Po-Lun Lai
47d986e6ff P2P: Check Action frame payload match before accepted TX status
It is possible for there to be two pending off-channel TX frames, e.g.,
when two devices initiate GO Negotiation at more or less the same time.
This could result in the TX status report for the first frame clearing
wpa_s->pending_action_tx that included the newer frame that has not yet
been transmitted (i.e., is waiting to be sent out). Avoid losing that
frame by confirming that the TX status payload matches the pending frame
before clearing the pending frame and reporting the TX status callback.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-23 17:47:40 +03:00
Jouni Malinen
d259249762 Fix ENABLE_NETWORK not to reconnect in disconnected state
DISCONNECT followed by ENABLE_NETWORK ended up starting a scan for a new
connection due to wpa_supplicant_enable_one_network() setting
wpa_s->reassociate = 1. This was done regardless of wpa_s->disconnected
being 1 which should imply that wpa_supplicant should not try to connect
before asked explicitly with REASSOCIATE or RECONNECT.

Fix this by making ENABLE_NETWORK setting of reassociate = 1 and
starting of scans for connection conditional on wpa_s->disconnected ==
0. This will make ENABLE_NETWORK trigger a connection only if
wpa_supplicant is already in a state where it would try to connect if
there are any enabled networks.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-23 12:09:46 +03:00
Jouni Malinen
af8a827b90 Make frequency range list routines more general
This allows the frequency range list implementation to be shared for
other purposes.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-23 00:44:07 +03:00
Dan Williams
538922a628 dbus: Add boolean AllowRoam option to Scan() method options dictionary
To disallow roaming when a scan request's results are read, callers
of the D-Bus Scan() method may add a new "AllowRoam" boolean key
to the scan options dictionary and set that key's value to FALSE.

Signed-hostap: Dan Williams <dcbw@redhat.com>
2013-10-22 16:09:46 +03:00
Pontus Fuchs
c6f5dec9c1 Don't start second scan when changing scan interval
If a scan is currently running and the scan interval is changed, a
second scan will be started before the current has finished. This will
in turn, if no networks are configured, cause wpa_s->state to be
forced to WPA_INACTIVE before the first scan has finished.

Signed-hostap: Pontus Fuchs <pontus.fuchs@gmail.com>
2013-10-22 15:57:21 +03:00
Jouni Malinen
313424d46e GAS: Add support for multiple pending queries for the same destination
Need to use the pointer to the current ongoing query instead of matching
from the pending list based on the destination address so that we get
the correct query instance when processing the TX status report.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-21 14:37:37 +03:00
Jouni Malinen
cbc5484892 GAS: Do not start new scan operation during an ongoing GAS query
These operations can have conflicting offchannel requirements, so wait
with a new scan trigger until a pending GAS query has been completed.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-21 13:20:38 +03:00
Kyeyoon Park
c377514337 GAS: Delay GAS query Tx while scanning/connecting
Offchannel operations needed for a GAS query can conflict with ongoing
scan/connection progress, so delay GAS queries if such an operation is
in progress on the current interface or any virtual interface sharing
the same radio.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-21 13:15:45 +03:00
Kyeyoon Park
24c694b465 GAS: Delay GAS query Tx while another query is in progress
It would be possible to issue another GAS query when a previous one is
still in progress and this could result in conflicting offchannel
operations. Prevent that by delaying GAS query initiation until the
previous operation has been completed.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-21 13:13:42 +03:00
Jouni Malinen
7255983b59 WPS: Clear after_wps from number of new locations
This makes it less likely to forget WPS single-channel scan optimization
in effect after having completed the WPS operation or in case WPS
operating gets cancelled.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-10-20 21:38:02 +03:00
Jouni Malinen
73b54d63fc P2P: Fix Operating Channel in Invitation Request for operating group
When a GO or P2P Client invites a peer device to join an already
operating group, the Operating Channel in Invitation Request needs to be
forced to the current operating channel of the group.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-10-20 21:38:02 +03:00
Jouni Malinen
0c92963656 D-Bus: Clean up debug print for P2P invitation result
wpa_printf() does not need '\n' so remove the extra newline. In
addition, drop the priority of this message from MSG_INFO to MSG_DEBUG
since this is in no way exceptional operation.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-10-20 21:38:02 +03:00
Jouni Malinen
d2858883b0 P2P: Add GO BSS entry details to debug log on join-a-group
This makes it easier to debug issues related to selecting GO information
from the latest updated BSS table entry.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-10-20 21:38:01 +03:00
Jouni Malinen
e241b1b4f2 eap_proxy: Fix IMSI fetch for home vs. visited network determination
Use similar mechanism to CONFIG_PCSC=y case to set the IMSI and MNC
length for eap_proxy. This allows automatic 3GPP realm comparison
against the domain list.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-10-20 13:12:04 +03:00
Jouni Malinen
a5d44ac083 EAP peer: Add framework for external SIM/USIM processing
The new configuration parameter external_sim=<0/1> can now be used to
configure wpa_supplicant to use external SIM/USIM processing (e.g., GSM
authentication for EAP-SIM or UMTS authentication for EAP-AKA). The
requests and responses for such operations are sent over the ctrl_iface
CTRL-REQ-SIM and CTRL-RSP-SIM commands similarly to the existing
password query mechanism.

Changes to the EAP methods to use this new mechanism will be added in
separate commits.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-10-20 13:12:04 +03:00
Jouni Malinen
7e8bc7d6fb eapol_test: Initialize BSS lists
This is needed to avoid issues with control interface commands that
could request BSS list during an eapol_test run. wpa_cli tries to update
its internal BSS list and that could trigger eapol_test crashes without
this.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-10-19 16:28:56 +03:00
Jouni Malinen
bceb843108 Send CTRL-RSP command response before processing EAPOL update
This is what the original implementation did years ago, but the move to
using separate control interface backends re-ordered the implementation
to process EAPOL notification first. Use a registered timeout to allow
the ctrl_iface response to be sent out first to get somewhat faster
response time and to avoid pending operations that could result in
ctrl_iface response and unsolicited event messages from getting mixed
up.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-10-19 16:26:01 +03:00
Jouni Malinen
b6077964c2 eapol_test: Fix external EAP request mechanism
The eap_param_needed callback was forgotten from eapol_test and this
prevented external EAP request processing through ctrl_iface from being
tested.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-10-19 13:44:39 +03:00
Jouni Malinen
94de082b39 eapol_test: Initialize wpa_s->global to fix ctrl_iface
wpa_s->global is now dereferenced in number of places and at least one
of them hits in eapol_test cases. Fix issues with this by setting the
global pointer to empty data.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-10-19 13:08:37 +03:00
Jouni Malinen
f07bba3255 Android: Add dfs.c into build
This fixes Android build after commit
e76da50529 that added the new dfs.c file.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-18 15:18:40 +03:00
Jouni Malinen
f47c145285 Interworking: Add required_roaming_consortium parameter for credentials
This allows credentials to be limited from being used to connect to a
network unless the AP advertises a matching roaming consortium OI.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-18 14:13:45 +03:00
Jouni Malinen
a83e5749ac GAS: Update timeout from TX status handler
This allow GAS operations to be fine-tuned based what happens with GAS
query TX. Failed queries are timed out immediately and acknowledged
queries are given some more time to account for possible TX queue
latencies.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-18 14:13:45 +03:00
Jouni Malinen
56f5af489c Interworking: Add support for QoS Mapping functionality for the STA
Indicate support for QoS Mapping and configure driver to update the QoS
Map if QoS Map Set elements is received from the AP either in
(Re)Association Response or QoS Map Configure frame.

This commit adds support for receiving the frames with nl80211 drivers,
but the actual QoS Map configuration command is still missing.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-18 14:13:45 +03:00
Jouni Malinen
ac1bc54948 Interworking: Add domain_suffix_match for credentials
This allow domain_suffix_match to be specified for a cred block and then
get this copied for the network blocks generated from this credential as
part of Interworking network selection.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-18 14:13:45 +03:00
Jouni Malinen
463c8ffbd5 Interworking: Add support for multiple home FQDNs
Credentials can now be configured with more than one FQDN ('domain'
field in the cred block) to perform Domain Name List matching against
multiple home domains.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-18 14:13:45 +03:00
Jouni Malinen
01f809c7db Add AAA server domain name suffix matching constraint
The new domain_suffix_match (and domain_suffix_match2 for Phase 2
EAP-TLS) can now be used to specify an additional constraint for the
server certificate domain name. If set, one of the dNSName values (or if
no dNSName is present, one of the commonName values) in the certificate
must have a suffix match with the specified value. Suffix match is done
based on full domain name labels, i.e., "example.com" matches
"test.example.com" but not "test-example.com".

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-18 13:34:26 +03:00
Janusz Dziedzic
e76da50529 hostapd: Add AP DFS support
Add DFS structures/events handlers, CAC handling, and radar detection.
By default, after radar is detected or the channel became unavailable, a
random channel will be chosen.

This patches are based on the original work by Boris Presman and
Victor Goldenshtein. Most of the DFS code is moved to a new dfs.c/dfs.h
files.

Cc: Boris Presman <boris.presman@ti.com>
Cc: Victor Goldenshtein <victorg@ti.com>

Signed-hostap: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-hostap: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2013-10-17 21:05:15 +03:00
Pontus Fuchs
5079392954 Increase buffer size and prevent write beyond buffer end
wpa_config_write_key_mgmt has a buffer size of 50. This is not enough
to fit the longest case. I used a network with "WPA-PSK WPA-EAP
WPA-NONE" and CONFIG_IEEE80211R=y + CONFIG_IEEE80211W=y to produce
a string longer than 50 chars. Increase the buffer size to 100 to
prevent truncated output.

Truncated output is not the only problem. If the buffer end is
reached when adding certain key mgmt types the function does not
return immediately. This leaves pos > end. When a second os_sprintf
is called the calculation of end - pos yields a large positive
number for buffer size. End result is a write beyond the buffer end.
Fix this by bailing out if buffer end is reached.

Signed-hostap: Pontus Fuchs <pontus.fuchs@gmail.com>
2013-10-14 20:49:26 +03:00
Jithu Jance
7e910b7b51 WPS NFC: Cancel scheduled scan before attempting a scan
Cancel scheduled scan (if any) before attempting to scan for the newly
received configuration/credential in WPS NFC Config token case.

Signed-hostap: Jithu Jance <jithu@broadcom.com>
2013-10-14 20:42:27 +03:00
Jouni Malinen
b72e14e599 P2P: Do not allow P2P client connection without P2P IE from GO
P2P-GROUP-STARTED event depends on having enough information about the
group available. To avoid incomplete information from being delivered to
upper layers, do not accept scan results without P2P IE (e.g., from a
non-P2P scan) for P2P client association process. This can be of use for
some join-a-group cases where non-P2P scans have generated the BSS entry
for the GO.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-14 19:41:23 +03:00
Jouni Malinen
5df7414b04 P2P: Allow persistent group determination based on Beacon frame
P2P IE may be available from a Beacon frame from a GO even if we have
not yet received a Probe Response frame with P2P IE from that GO. Since
all the needed information for determining the GO's P2P Device Address
and group capabilities are available, use that information instead of
displaying incomplete group information.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-14 19:28:00 +03:00
Jouni Malinen
aaeb9c98e6 P2P: Allow GO to be discovered based on Beacon frame
This fixes some P2P-join-a-group cases where GO may have been discovered
based on passive scan or non-P2P scan. P2P IEs may have been received
from a Beacon frame in such a case and that information can be used to
create a P2P peer entry, e.g., to allow provision discovery exchange to
be completed.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-14 19:25:28 +03:00
Jouni Malinen
b16696ff72 P2P: Show p2p flag in debug info for scan results
This makes it easier to confirm that P2P capabilities for a GO has been
discovered properly.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-14 19:23:38 +03:00
Jouni Malinen
bb50ae4396 P2P: Show P2P flag in BSS entries also based on Beacon frames
It is possible that a P2P GO has been discovered through a non-P2P scan
that did not return P2P IE in Probe Response frames. To cover those
cases, check also Beacon frame (if received) for P2P IE.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-14 19:22:09 +03:00
Jouni Malinen
ff57398fca P2P: Do not drop P2P IEs from BSS table on non-P2P scans
This could happen when non-P2P station interface runs a scan without P2P
IE in the Probe Request frame. P2P GO would reply to that with a Probe
Response that does not include P2P IE. Do not update the IEs in this BSS
entry to avoid such loss of information that may be needed for P2P
operations to determine group information.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-14 17:34:41 +03:00
Jouni Malinen
adeb4f59a2 P2P: Make sure wait for the first client gets stopped
If a group was removed before the wait for the first client had timed
out and the client had not yet connected, p2p_go_wait_client could have
been left set and with that, scan operations could be unnecessarily
delayed. This fixes some undesired delays from commit
c1c0b35fea.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-10-05 22:15:28 -07:00
Dmitry Shmidt
f22f274bbf P2P: Clone 'disable_scan_offload' parameter for p2p group
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2013-10-05 18:18:20 -07:00
Deepthi Gowri
acdd0fc84f P2P: Clear p2p_group_formation and p2p_in_provisioning on group removal
Commit 41f853235f extends group formation
timeout for the first data connection to complete and resets
p2p_go_group_formation_completed flag due to which p2p_in_provisioning
and p2p_group_formation flags are not cleared when
wpas_group_formation_completed() is called. This can result in both
station scan and p2p_find failures in the case where separate P2P group
interface is not used and the client does not complete 4-way handshake.
Fix this by clearing p2p_group_formation and p2p_in_provisioning when
such a P2P group is deleted.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-05 17:54:52 -07:00
Arif Hussain
8b3b803ab9 Include Extended Capabilities element based on scan results
Add Extended Capabilities element to association request only if the AP
included this element in Beacon/Probe Response frames. This is a
workaround to address interoperability issues with some older APs that
do not seem to be able to handle Extended Capabilities element in
(Re)Association Request frames.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-02 08:09:05 -07:00
Deepthi Gowri
6903ee6f62 P2P Extend postponing of concurrent scans for persistent GO
Update the p2p_go_wait_client timestamp in p2p_go_configured() to
address the case where the group is set up without the provisioning
step.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-02 07:32:17 -07:00
Sunil Dutt
f130b105ec TDLS: Clean up wpa_tdls_teardown_link() uses
Making this function be used only for external setup case simplifies the
implementation and makes core wpa_supplicant calls in ctrl_iface.c and
events.c consistent.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-09-30 17:10:18 +03:00
Jouni Malinen
5388dc97e0 Document use of Linux capabilities instead of privileged process
Linux capabilities cap_net_admin and cap_net_raw can be used to replace
need for running wpa_supplicant as a root process.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-29 12:04:40 +03:00
Jouni Malinen
a771c07dfc Add driver status information to control interface
STATUS-DRIVER command can now be used to fetch driver interface status
information. This is mainly for exporting low-level driver interface
information for debug purposes.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-28 17:19:30 +03:00
Jouni Malinen
298f51857d Get rid of compiler warning in no-CONFIG_CTRL_IFACE builds
no_ctrl_interface parsing was declared within ifdef CONFIG_CTRL_IFACE
block, so the parser function needs to be marked similarly.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-27 23:42:37 +03:00
Jouni Malinen
ea61aa1de1 Add no_ctrl_interface config param to clear ctrl_interface
This can be used to override previously set ctrl_interface value in a
way that clears the variable to NULL instead of empty string. The only
real use case for this is to disable per-interface ctrl_interface from
the additional control file (-I<file>) in case ctrl_interface was set in
the main configuration file. It should be noted that zero-length
ctrl_interface parameter can be used to initiate some control interface
backends, so simpler designs were not available for this.

The format of the new parameter is not exactly cleanest due to
configuration file parsing assumptions. For example:

ctrl_interface=....
no_ctrl_interface=

would end up with ctrl_interface=NULL.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-09-27 23:34:35 +03:00
Jouni Malinen
25b65a142d Make sure updated BSS entry does not get added twice to the list
When the BSS table is being updated based on new scan results, a BSS
entry could end up getting added into last_scan_res list multiple times
if the scan results from the driver includes duplicated values. This
should not happen with driver_nl80211.c since it filter outs duplicates,
but in theory, other driver wrappers could indicate such scan results.
Anyway, it is safer to make sure this cannot happen by explicitly
verifying the last_scan_res list before adding an updated BSS entry
there. A duplicated entry in the list could potentially result in freed
memory being used if there is large enough number of BSSes in the scan
results to cause removal of old BSS entries.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-09-27 16:00:50 +03:00
Jouni Malinen
a3cbf82e6d Fix possible freed-memory use in BSS table updates
If there are large number of BSSes in the scan results, BSS table update
could have added a BSS entry to the last_scan_res in a case where that
BSS entry got just deleted. This would happen only if there are more
than bss_max_count (by default 200) BSSes and if at least bss_max_count
of those BSSes are known (match a configured network). In such a case,
wpa_bss_add() could end up allocating a new BSS entry and return a
pointer to that entry even if it was the one that ended up getting freed
to keep the BSS table length within the limit. This could result in
freed memory being used and the process crashing (likely with segfault)
when trying to access information from that BSS entry.

Fix the issue by removing the oldest BSS entry before linking the new
entry to the table. This makes sure the newly added entry will never get
picked up as the one to be deleted immediately.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-09-27 15:56:06 +03:00
Jouni Malinen
bbc6c729a5 P2P: Use group formation timeout on persistent group GO
Previously, GO considered the group to be fully re-invoked after
starting beaconing on successful invitation exchange. This would leave
the group running until idle timeout (which may not be enabled) or
explicit removal if the client fails to connect for any reason. Since
the client is expected to connect immediately after the invitation
exchange that ends with status=0 (i.e., either client initiated the
exchange or it responded with success), extend group formation timeout
to cover that period until the first successfully completed data
connection. This allows the GO to remove the group automatically if the
client devices does not connect within
P2P_MAX_INITIAL_CONN_WAIT_GO_REINVOKE (15) seconds.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-09-26 21:24:09 +03:00
Jouni Malinen
41f853235f P2P: Extend group formation timeout on GO to first data connection
Previously, GO considered the group to be fully formed at the completed
of WPS provisioning step. This would leave the group running until idle
timeout (which may not be enabled) or explicit removal if the client
fails to connect for any reason. Since the client is expected to connect
immediately after the WPS provisioning step, extend group formation
timeout to cover that period until the first successfully completed data
connection. This allows the GO to remove the group automatically if the
client devices does not connect within P2P_MAX_INITIAL_CONN_WAIT_GO (10)
seconds.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-09-26 20:32:44 +03:00
Jouni Malinen
20625e9753 P2P: Remove P2P groups on process termination
Killing the wpa_supplicant process or using TERMINATE ctrl_iface command
resulted in the process existing without cleaning up possibly added
dynamic P2P group interfaces. Clean this up by stopping each P2P group
before stopping eloop.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-09-26 01:38:30 +03:00
Jouni Malinen
76fe79ef2d Register wpa_msg callback even if only global ctrl_iface is used
Previously, wpa_msg_register_cb() was called only from successful
completion of per-interface control interface initialization. This would
leave the callback unregistered in case only the global control
interface is used which would result in not delivering control interface
events on the global interface. Fix this by registering the callback
handler also from successful initialization of the global control
interface.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-09-26 01:31:32 +03:00
Jouni Malinen
89286e91bf Re-open ctrl_iface socket on some failure cases as a workaround
If wpa_supplicant ctrl_iface clients are misbehaving and refusing to
read replies or event messages from wpa_supplicant, the single socket
used in wpa_supplicant to send messages can reach the maximum send
buffer limit. When that happens, no more responses to any client can be
sent. Work around this by closed and reopening the socket in case such a
failure state is detected. This is obviously not desirable since it
breaks existing connected sockets, but is needed to avoid leaving
wpa_supplicant completely unable to respond to any client. Cleaner fix
for this may require more considerable changes in the ctrl_iface design
to move to connection oriented design to allow each client to be handled
separately and unreachability to be detected more reliably.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-09-25 16:23:11 +03:00
Jouni Malinen
742e715b31 Simplify ctrl_iface sendto() use
Prepare reply buffer first for all cases and then use a single sendto()
call instead of three calls depending on reply type. This allows simpler
error handling for control interface send operations.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-09-23 17:52:10 +03:00
Jouni Malinen
6668efda58 Clear frequency list on empty value
Allow current frequency list of be cleared with an empty string value.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-09-23 16:22:16 +03:00
Masashi Honma
1a9f24714e Make scan_freq field to be saved by save_config
Signed-hostap: Masashi Honma <masashi.honma@gmail.com>
2013-09-23 16:06:06 +03:00
Kamath Vinayak
3cc247a78f Use configured sched_scan interval for the PNO scan
The interval for the PNO scan did not use the configured sched_scan
interval. This commit addresses the same by using the configured value
or the default of 10 seconds if configuration parameter is not used.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-09-15 15:21:42 -07:00
Jouni Malinen
79986bf69e Print ctrl_iface sendto() failures into debug log
This makes it easier to debug issues with control interface operations
failing.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-09-14 11:25:31 -07:00
Jouni Malinen
eab2b50dc8 P2P: Cancel group formation timeout on client connection
It was possiblle for the group formation timeout to be left running even
after the P2P Client connected to the group if the WPS provisioning step
was not completed cleanly (e.g., due to WSC_Done not getting received
from the client). There is no need to remove the group in such case due
to the initial group formation timeout, so work around this by removing
that timeout on data connection.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-09-14 11:25:10 -07:00
Jouni Malinen
00eb299396 P2P: Fix operation channel configuration update
There was already a CFG_CHANGED_P2P_OPER_CHANNEL handler function, but
this flag was not set when the p2p_oper_reg_class or p2p_oper_channel
parameters were changed.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-09-14 11:24:56 -07:00
Vinay Krishna Eranna
b2b688d18d P2P: Fix crash when failed to create GO interface
wpa_supplicant crashes if driver configuration for AP mode interface
configuration fails after group negotiation. This is because of a
regression from commit 1075b29571 that
ends up freeing the wpa_s instance from within
wpa_supplicant_create_ap() without the caller knowing.

Fix this by using an eloop timeout to free remove the P2P group so that
wpa_supplicant_create_ap() and especially wpa_supplicant_associate()
callers do not need to know about interface getting possibly removed. In
addition, move the P2P specific code into p2p_supplicant.c where it
really belongs. This allows the already existing group formation timeout
to be used by reducing the timeout to zero.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-09-03 12:43:12 +03:00
Jouni Malinen
61971697bb WPS NFC: Fix build without CONFIG_AP=y
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-09-03 11:27:24 +03:00
Jouni Malinen
e1ae5d743f SAE: Fix build without CONFIG_AP=y
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-09-03 11:25:29 +03:00
Jouni Malinen
813e7b364f P2P: Remove group from timeout on PSK failure
Avoid potential issues with removing a P2P group on PSK failure directly
from the wpa_supplicant_event() call since the caller (in driver_*.c)
may not be prepared for the interface disappearing at that point in
time.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-09-02 16:33:42 +03:00
Jouni Malinen
5bf9a6c859 P2P: Add event messages for possible PSK failures on P2P groups
It is possible for the GO of a persistent group to change the PSK or
remove a client when per-client PSKs are used and this can happen
without the SSID changing (i.e., the group is still valid, but just not
for a specific client). If the client side of such persistent group ends
up trying to use an invalidated persistent group information, the
connection will fail in 4-way handshake. A new WPS provisioning step is
needed to recover from this.

Detect this type of case based on two 4-way handshake failures when
acting as a P2P client in a persistent group. A new
"P2P-PERSISTENT-PSK-FAIL id=<persistent group id>" event is used to
indicate when this happens. This makes it easier for upper layers to
remove the persistent group information with "REMOVE_NETWORK <persistent
group id>" if desired (e.g., based on user confirmation).

In addition to indicating the error cases for persistent groups, all
this type of PSK failures end up in the client removing the group with
the new reason=PSK_FAILURE information in the P2P-GROUP-REMOVED event.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-01 21:35:10 +03:00
Jouni Malinen
eac8dab87c P2P: Document per-client keys and p2p_remove_client
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-01 21:35:10 +03:00
Jouni Malinen
43c693c21a P2P: Do not store duplicate PSK entries for the same device
If a client joins a P2P group multiple times, replace the previous
per-client PSK entry instead of adding a new entry each time.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-01 21:35:10 +03:00
Jouni Malinen
f2c566027e P2P: Add a command for removing a client from all groups
The new control interface command P2P_REMOVE_CLIENT <P2P Device
Address|iface=Address> can now be used to remove the specified client
from all groups (ongoing and persistent) in which the local device is a
GO. This will remove any per-client PSK entries and deauthenticate the
device.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-01 21:35:10 +03:00
Jouni Malinen
01a57fe420 P2P: Maintain list of per-client PSKs for persistent groups
Record all generated per-client PSKs in the persistent group network
block and configure these for the GO Authenticator whenever re-starting
the persistent group. This completes per-client PSK support for
persistent groups.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-01 21:35:10 +03:00
Jouni Malinen
759fd76b7f P2P: Select PSK based on Device Address instead of Interface Address
When using per-device PSKs, select the PSK based on the P2P Device
Address of the connecting client if that client is a P2P Device. This
allows the P2P Interface Address to be changed between P2P group
connections which may happen especially when using persistent groups.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-01 11:30:26 +03:00
Jouni Malinen
94ddef3e72 P2P: Make peer's P2P Device Address available to authenticator
This can be used to implement per-device PSK selection based on the
peer's P2P Device Address instead of P2P Interface Address.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-01 11:05:19 +03:00
Jouni Malinen
52177fbb70 P2P: Store P2P Device Address in per-device PSK records
This makes the P2P Device Address of the Enrollee available with the PSK
records to allow P2P Device Address instead of P2P Interface Address to
be used for finding the correct PSK.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-01 10:47:34 +03:00
Jouni Malinen
05766ed8de P2P: Allow per-device PSK to be assigned
"wpa_cli p2p_set per_sta_psk <0/1>" can now be used to disable/enable
use of per-device PSKs in P2P groups. This is disabled by default.
When enabled, a default passphrase is still generated by the GO for
legacy stations, but all P2P and non-P2P devices using WPS will get
a unique PSK.

This gives more protection for the P2P group by preventing clients from
being able to derive the unicast keys used by other clients. This is
also a step towards allowing specific clients to be removed from a group
reliably without having to tear down the full group to do so.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-01 10:14:29 +03:00
Jouni Malinen
698e921b9e wpa_cli: Add tab completion for p2p_set field values
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-08-31 20:58:35 +03:00
Syed Asifful Dayyan Rafiuddeen
0b5fb86a24 P2P: Stop listen state when listen-only duration is over
Even after listen duration is over, P2P module remained in
P2P_LISTEN_ONLY state, which is blocking station mode scans. Fix this by
stopping P2P listen explicitly to update p2p_state to IDLE when listen
duration expires.

Signed-hostap: Syed Asifful Dayyan <syedd@broadcom.com>
2013-08-31 18:09:15 +03:00
Jouni Malinen
02a3e5c0d1 wpa_cli: Allow first DISCONNECTED event to be reported
wpa_cli filters out extra DISCONNECTED events from action scripts. This
ended up filtering out the first real DISCONNECT event in case wpa_cli
was started when wpa_supplicant was in connected state. Change wpa_cli
to allow the first disconnection event to be reported to the action
script in such case.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-08-31 17:27:20 +03:00
Jouni Malinen
731ef436d1 D-Bus: Fix per-iface object unregistration on not existing objects
If the private data for an object is not found, do not try to unregister
that object to avoid D-Bus errors.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-08-31 16:46:24 +03:00
Jouni Malinen
447969e034 D-Bus: Do not send network notification for all P2P groups
Previously, network added event was skipping during group formation.
However, this did not necessarily catch all cases of temporary P2P
network blocks. Check ssid->p2p_group to make this behavior more
consistent by avoiding all P2P groups.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-08-31 16:44:42 +03:00
Masashi Honma
eb32460029 Fix switching from EAP-SIM to EAP-AKA/AKA'
Switching EAP method from EAP-SIM to EAP-AKA fails.
wpa_cli commands are below.

------------------
sudo wpa_cli add_network
sudo wpa_cli set_network 0 ssid '"eap-sim"'
sudo wpa_cli set_network 0 key_mgmt WPA-EAP
sudo wpa_cli set_network 0 eap SIM
sudo wpa_cli set_network 0 pin '"1234"'
sudo wpa_cli set_network 0 pcsc '""'
sudo wpa_cli select_network 0

sudo wpa_cli disable_network 0
sudo wpa_cli disconnect
sudo wpa_cli remove_network 0

sudo wpa_cli add_network
sudo wpa_cli set_network 0 ssid '"eap-sim"'
sudo wpa_cli set_network 0 key_mgmt WPA-EAP
sudo wpa_cli set_network 0 eap AKA
sudo wpa_cli set_network 0 pin '"1234"'
sudo wpa_cli set_network 0 pcsc '""'
sudo wpa_cli select_network 0
------------------

Then EAP-AKA connection resulted in fail.
wpa_supplicant log is below.

------------------
wlan0: CTRL-EVENT-EAP-METHOD EAP vendor 0 method 23 (AKA) selected
SCARD: Non-USIM card - cannot do UMTS auth
EAP-AKA: UMTS authentication failed (AUTN)
wlan0: CTRL-EVENT-EAP-FAILURE EAP authentication failed
------------------

This occurs because on the first EAP-SIM authentication, the SIM/USIM
card in the device was recognized as SIM card even if it is USIM card.

So this patch changes it to recognize as USIM card even if EAP-SIM
authentication was required.

I have tested these switching cases.
EAP-SIM -> EAP-AKA
EAP-SIM -> EAP-AKA'
EAP-AKA -> EAP-SIM
EAP-AKA -> EAP-AKA'
EAP-AKA' -> EAP-SIM
EAP-AKA' -> EAP-AKA

Signed-hostap: Masashi Honma <masashi.honma@gmail.com>
2013-08-31 16:11:48 +03:00
Sreenath Sharma
f2b3f4de49 P2P: Allow P2P functionality to be disabled per interface
By default, P2P is initialized for all driver interfaces and this makes
P2P getting initialized for non-P2P station interface if the supplicant
is started first on this interface. If an interface is dedicated for
non-P2P station mode, it is now possible to disable P2P initialization
by adding 'p2p_disabled=1' in the configuration file of non-P2P station
interface, irrespective of the order in which supplicant is started.

Signed-hostap: Sreenath Sharma <sreenats@broadcom.com>
2013-08-31 11:59:05 +03:00
Sreenath Sharma
43ee470494 P2P: Immediate group removal in GC in case of deauthentication
Right now in case of deauthentication from GO, immediate group removal will
happen in GC only if the deauthentication packet has a valid IE. However,
the IE in deauthentication packet is mandated only for managed P2P group.
So in normal P2P group the group removal is delayed and will happen later
only in group idle timeout.

This fixes a regression from commit
d7df0fa727 that changed the previous check
for data->deauth_info != NULL to data->deauth_info->ie != NULL.

Signed-hostap: Sreenath Sharma <sreenats@broadcom.com>
2013-08-31 11:11:41 +03:00
Jouni Malinen
add7add09d IBSS RSN: Add a timeout for Authentication frame exchange
It is possible for the peer device not to support Authentication frame
exchange even though this would be required functionality in the
standard. Furthermore, either Authentication frame may be lost. To
recover from cases where Authentication frame sequence 2 is not
received, start EAPOL Authenticator from one second timeout.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-08-27 16:26:33 +03:00
Jouni Malinen
c1c0b35fea P2P: Postpone concurrent scans when waiting for first client as GO
Previously, concurrent station mode scans were postponed during an
ongoing P2P group formation up to the point of completed WPS
provisioning step. This would allow a scan to be started before the P2P
client has completed association for the data connection if a scan
request were timed to hit the window between the provisioning step and
the following association. Avoid this by extending P2P-in-progress state
to continue until the first data connection has been completed as part
of group formation. Use a ten second timeout for this to avoid leaving
scans disabled indefinitely if the client fails to connect completely.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-08-27 12:23:10 +03:00
Jouni Malinen
6fb7b58fe4 IBSS RSN: Work around Data RX vs. Authentication RX race condition
It is possible for the driver to report EAPOL frame RX before
Authentication frame RX even if the frames arrived in the opposite
order. This can result in issues in cases where both IBSS peers initiate
Authentication frame exchange at about the same time and one of the
EAPOL sessions is started before processing Authentication frame seq=1
RX. Work around this by not re-initializing EAPOL state on
Authentication (SEQ=1) RX if own Authentication frame was transmitted
within last 500 ms.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-08-27 02:54:35 +03:00
Jouni Malinen
99d7c76294 P2P: Add more debug info on operating channel selection
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-08-26 14:08:03 +03:00
Jouni Malinen
8d660e04e9 P2P: Add GO negotiation results into the P2P-GO-NEG-SUCCESS event
This provides status information about the negotiated group to
wpa_supplicant control interface monitors during group formation in a
form that is easier to use than having to fetch the information
separately.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-08-26 13:35:44 +03:00
Jouni Malinen
2c6f8cf6c8 Replace perror() with wpa_printf(strerror) in ctrl_iface calls
This replaces number of perror() calls with wpa_printf() to get the
error messages embedded within rest of the debug messages in the same
stream instead of pushing these to stderr which may get directed to
another location.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-08-26 11:46:21 +03:00
Jouni Malinen
e743db4309 IBSS RSN: Add IBSS-RSN-COMPLETED event message
This new control interface event message is used to indicate when
both 4-way handshakes have been completed with a new IBSS peer.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-08-25 23:09:22 +03:00
Jouni Malinen
4c559019bd P2P: Add state info to global STATUS command
This can be used for debugging purposes to see what the current P2P
module state is.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-08-25 21:02:12 +03:00
Jouni Malinen
ae8c27f79d Add STATUS command to global control interface
This provides global status information that is applicable to all
interfaces (e.g., P2P state). In addition, ifname/address pairs are
listed to get information of all the interfaces that are currently
managed through this wpa_supplicant instance.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-08-25 20:53:58 +03:00
Jouni Malinen
42868f1486 Add SAVE_CONFIG command to global control interface
This iterates through all interfaces and saves configuration file
updates for each interface that allows it (update_config=1).

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-08-25 20:41:39 +03:00
Jouni Malinen
1b9b31c153 Add SET command for global control interface
This allows global parameters to be set through the global control
interface without having to use IFNAME prefix. For now, this covers
only the wifi_display parameter.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-08-25 20:35:19 +03:00
Jouni Malinen
25a8f9e316 Clear EAPOL supplicant configuration info on current_ssid changes
There were some code paths that allowed obsolete configuration data
pointer to be maintained within EAPOL supplicant in case a network was
removed while not connection to it (i.e., wpa_s->current_ssid not
pointing to the network that was removed). This could result in use of
freed memory, e.g., from eap_sm_notify_ctrl_attached() when a new
control interface connected prior to the EAPOL supplicant configuration
pointer got updated.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-08-25 19:46:57 +03:00
Avraham Stern
973622cd44 wpa_supplicant: Fix AP mode frequency initialization
In AP mode the frequency was initialized only after trying to set up the
AP which caused failure. Move AP frequency initialization to the right
place. This allows an AP mode network block without the frequency
parameter to be used with the default channel 11 being selected in that
case.

Signed-hostap: Avraham Stern <avraham.stern@intel.com>
2013-08-25 11:24:29 +03:00
Ilan Peer
d99ca89d98 P2P: Skip non-P2P interface in p2p_group_remove *
When 'p2p_group_remove *' is called while the station interface
is connected, the flow also disconnects the station interface.
Fix this by skipping non-P2P interfaces in the iteration.

Signed-hostap: Ilan Peer <ilan.peer@intel.com>
2013-08-25 11:17:14 +03:00
David Spinadel
239abaf2ab WPS: Set currently used RF band in RF Bands attribute
According to WSC specification (Ver 2.0.2, section 8.3), RF Bands
attribute should be set to the specific RF band used for the current
message. Add an option to set wanted band in wps_build_rf_bands() and
add a callback to get the current band from wpa_supplicant and hostapd.

Signed-hostap: David Spinadel <david.spinadel@intel.com>
2013-08-25 10:55:53 +03:00
Ilan Peer
e0591c3cfe wpa_supplicant: Reduce wait time for control interfaces
Reduce the wait time for the monitor control interfaces to get
messages on wpa_supplicant de-init etc., as this significantly delays
the shutdown of the wpa_supplicant.

Signed-hostap: Ilan Peer <ilan.peer@intel.com>
2013-08-25 09:48:27 +03:00
Arik Nemtsov
5046eb4e4d P2P: Allow separate interface GO to disconnect low-ack STAs
Propagate the disassoc_low_ack setting from the main P2P interface to
the group interface.

Signed-hostap: Arik Nemtsov <arik@wizery.com>
2013-08-25 09:28:50 +03:00
Jouni Malinen
a235aca316 Fix DETACH command debug prints to avoid use of freed memory
In case a control interface socket is detached because of sendmsg()
failing for the socket, function call to detach the socket uses a
pointer to the socket information in the structure to be freed. Reorder
code to print socket info before freeing the data to avoid use of freed
memory in case debug prints are enabled.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-08-24 23:31:06 +03:00
Jouni Malinen
8d6e035072 Make global UNIX socket non-blocking for ctrl_iface
This keeps wpa_supplicant from hanging forever if the other end of the
socket dies. This is similar to the earlier commit
4fdc8def88 to make the global control
interface befave in the same way.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-08-24 20:31:04 +03:00
Jouni Malinen
86bd141050 Change WEP network selection to reject WPA/WPA2 APs
Previously, wpa_supplicant behavior in WEP configuration was to try to
mimic a device that is not aware of WPA/WPA2 and as such, it tried to
connect to a WPA/WPA2 AP with the assumption that the AP could be
providing support for both WEP and WPA/WPA2 stations in the same BSS.
Such APs could have been used during transition from WEP to more secure
options, but that type of deployment have not been used in large number
and are not really of much use anymore taken into account that more or
less all new devices support WPA/WPA2. That combined with the preference
to deprecate WEP justifies removing this use case and making WEP
networking matching more strict by using the knowledge of AP advertising
WPA/WPA2 as an indication of WEP not being supported.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-08-23 19:27:25 +03:00
Jouni Malinen
2e145e91e7 WPS: Fix failure path to allow WSC_NACK and EAP-Failure to be exchanged
Commit c7a67a7719 forced disconnection
when wpas_clear_wps() is called. Call this function from a registered
timeout when processing a failure event in order to allow the WPS
handshake to be completed with WSC_NACK and EAP-Failure.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-08-23 17:49:01 +03:00
Jeffin Mammen
50396e29da WPS: Add PBC mode activated/disabled events
This makes it easier to track PBC state on the registrar.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-08-23 16:52:48 +03:00
Jouni Malinen
961750c1e8 WPS: Share a common function for error strings
This makes it easier to maintain the list of WPS_EI_* error values and
matching strings.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-08-23 16:32:34 +03:00
Jouni Malinen
85a6cdb571 Revert "P2P: Reject p2p_find while P2P connection is in progress"
This reverts commit ce970851af.

It turned out that this breaks lots of use cases where p2p_find is
issued while already in p2p_listen state. As such, we cannot reject
p2p_find this easily without checking for more specific cases.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-08-01 17:03:06 +03:00
Deepthi Gowri
ce970851af P2P: Reject p2p_find while P2P connection is in progress
Though p2p_find is not expected during ongoing P2P connection, it is
possible that any third party application issues a p2p_find resulting in
connection failure. Address this by rejecting any p2p_find command while
connection is in progress.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-08-01 15:39:47 +03:00
Wei-Jen Lin
a2ea8d64d1 P2P: Fix invalid remain-on-channel duration for frame TX
cfg80211 does not allow the zero duration of remain-on-channel. Instead,
use 20 ms as default waiting time when remain-on-channel is used to
schedule offchannel transmission that does not expect a response.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-07-31 23:22:04 +03:00
Sean Lin
cbf41ca796 P2P: Do not delay retries on failure during group formation
4-way handshake may fail under extremely noisy environment and if this
happens during P2P group formation, the 10 second extra delay added in
wpas_auth_failed() can result in running over the 15 second timeout.

Avoid this by skipping the delay mechanism in wpas_auth_failed() for the
P2P group formation case. The P2P formation timeout will take care of
stopping the attempts if the failure condition does not get resolved.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-07-31 23:09:34 +03:00
Ilan Peer
0d08efa447 P2P: Use the number of concurrent channels in P2P flows
Change the P2P flows to use the number of concurrent channels
supported by the device and the number of currently used channels
for the P2P flows.

Signed-hostap: Ilan Peer <ilan.peer@intel.com>
Signed-hostap: David Spinadel <david.spinadel@intel.com>
2013-07-21 20:48:09 +03:00
Jouni Malinen
a21816a933 Use wpa_drv_shared_freq() if get_radio_name() is not supported
Some driver interfaces may not support the get_radio_name() design and
get_shared_radio_freqs() needs to be aware of such possibility when
determining shared radio frequencies.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-07-21 20:48:09 +03:00
Ilan Peer
53c5dfc2c4 Change share_vif_oper_freq() to handle multiple freqs
There are devices that can operate several channels concurrently.
Change shared_vif_oper_freq() to get_shared_radio_freqs() that can
return an array of frequencies currently used by all the virtual
interfaces that share the same radio.

In addition, move it to wpa_supplicant.c, so it can be used by other
modules.

Signed-hostap: Ilan Peer <ilan.peer@intel.com>
Signed-hostap: David Spinadel <david.spinadel@intel.com>
2013-07-21 20:03:53 +03:00
Ilan Peer
4752147d88 nl80211: Report the number of concurrent support channels
Previously, drivers only reported if they support multiple concurrent
channels, but did not report the maximum number of supported channels.
Add this reporting to the driver capabilities and add the implementation
to driver_nl80211.

Signed-hostap: Ilan Peer <ilan.peer@intel.com>
Signed-hostap: David Spinadel <david.spinadel@intel.com>
2013-07-21 19:49:47 +03:00
Jouni Malinen
d7df0fa727 Clean up wpa_supplicant_event() with deauth/disassoc helper functions
wpa_supplicant_event() has grown overly large, so it is useful to split
it into smaller pieces.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-07-21 16:40:40 +03:00
Jouni Malinen
fd9f170098 Remove unnecessary nested ifdef CONFIG_AP
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-07-21 16:01:29 +03:00
Antonio Quartulli
13adc57b39 IBSS RSN: Add peer restart detection
To better support the IBSS/RSN mechanism, wpa_supplicant has to be able
to detect a possible peer reboot and in this case it should start a new
EAPOL handshake.

To perform such reboot detection wpa_supplicant has to perform an Open
Authentication by sending an Authentication frame and then replying to
it. IF an Authentication frame is received when the key have already
been exchanged, wpa_supplicant understands that the peer has rebooted
and can reset its state machine.

Whenever a new peer is added to the IBSS wpa_supplicant will start the
Open Authentication and only after having accomplished it will start the
key exchange. If the driver does not support Authentication frame
exchange initiated from user space, this step is skipped to maintain
previous behavior (just go through EAPOL-Key frame processing).

The Open Authentication was partly supported by the Linux kernel but now
wpa_supplicant can register for Authentication frames, handle it in
userspace and so avoid any possible race condition.

Signed-hostap: Nicolas Cavallari <cavallar@lri.fr>
Signed-hostap: Antonio Quartulli <antonio@open-mesh.com>
2013-07-21 15:56:53 +03:00
Jouni Malinen
ec384c566a IBSS RSN: Fix disconnect() with internal SME
Commit 1aef400bf0 implemented IBSS RSN
disconnect() call using sta_deauth() in a way that resulted in NULL
pointer dereference in driver_nl80211.c if SME was in user space. Fix
this by passing the own MAC address in the sta_deauth call.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-07-21 15:21:38 +03:00
Arend van Spriel
4ed8d954dd TDLS: Tear down TDLS using wpas_drv_tlds_oper() if not external
When the device indicates to take care of TDLS operations the TDLS
setup is done calling wpas_drv_tdls_oper(). This patch does a similar
thing for the teardown. This fixes failure of teardown:

"TDLS: Could not find peer <mac> for link Teardown"

Signed-hostap: Arend van Spriel <arend@broadcom.com>
2013-07-20 17:52:32 +03:00
Chengyi Zhao
831770bffe Cancel delayed scheduled scan when wpa_supplicant cleans up
Because a delayed scheduled scan will access the members of struct
wpa_supplicant which is freed and this can result in a crash,
wpa_supplicant needs to cancel delayed scheduled scan during cleanups.

Signed-hostap: Chengyi Zhao <chengyix.zhao@gmail.com>
2013-07-20 17:47:02 +03:00
Michal Kazior
c8ebeda406 wpa_supplicant: Add support for VHT BSS membership selector
This allows wpa_supplicant to associate to an AP that has VHT BSS
membership selector set to indicate VHT support is required for the BSS.

Without the patch it was impossible to connect to, e.g., hostapd-based
AP that has require_vht=1. wpa_supplicant was complaining with:
  hardware does not support required rate 63.0 Mbps

Signed-hostap: Michal Kazior <michal.kazior@tieto.com>
2013-07-20 17:28:42 +03:00
Jouni Malinen
1075b29571 P2P: Report group formation failure on error to start GO mode
There is no need to wait for the 15 second group formation timeout
before indicating P2P group formation failure if GO mode cannot be
started successfully for some reason.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-07-11 17:04:46 +03:00
Jouni Malinen
b62b29ea87 Do not block on ctrl_iface monitor events
It looks like some of the global control interface cases ended up
blocking in sendmsg() when trying to send an event. Since this can block
all wpa_supplicant processing for multiple seconds, this is very
undesirable. Avoid this by requesting sendmsg() to return an error
rather than waiting for the message to be sent.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-07-11 17:04:29 +03:00
Jouni Malinen
0b9d3b22c8 Interworking: Relax 3GPP info PLMN matching for MNC
3GPP TS 24.232 Annex A.3 allows network operator to advertise only two
digits of MNC even if MNC has three digits. Allow such matches in
network selection. In addition, allow three digit matches of MNC even if
MNC length was assumed to be two to avoid missing networks if MNC length
cannot be determined reliably. Remove the '-' separator from simulated
SIM/USIM cases to allow the new matching rules to work.

Fix the PLMN List information element parsing loop to use the length of
the PLMN List instead of the length of the full 3GPP Cellular Info to
avoid unexpected matches should a new element ever be added by 3GPP.

Finally, add more debug prints from PLMN matching to make the logs
easier to understand.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-07-08 16:53:05 +03:00
Junli Zhao
c7a67a7719 WPS: Disconnect when removing existing WPS network block
wpas_clear_wps() was just clearing the current wpa_s->current_ssid
pointer when removing a WPS network block which with the device was
associated. This could leave the association up even though the network
block had already been removed. Prevent this by explicitly disconnecting
from the network instead of such clearing current_ssid.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-07-08 12:09:18 +03:00
Jouni Malinen
7e7610d788 EAP-EKE: Add peer implementation
This adds a new password-based EAP method defined in RFC 6124.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-07-07 20:30:10 +03:00
Tomasz Bursztyka
06aeff5f8f dbus: Register the AutoScan method call at the right place
Signed-hostap: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2013-07-01 19:11:34 +03:00
Jouni Malinen
78f79fe5fc P2P: Do not add ctrl interface for P2P_DEVICE (p2p-dev-*)
Adding a new wpa_supplicant control interface for the dedicated
P2P_DEVICE would be quite confusing for programs that manage P2P
operations. Remove this control interface and require the global control
interface to be used since it will provide consistent interface for both
the new dedicated P2P_DEVICE (non-netdev) and old style P2P management
through a netdev.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-07-01 00:36:33 +03:00
Jouni Malinen
1c42b42f6c P2P: Fix TDLS and l2_packet init without P2P Device interface
Commit c68f6200a7 made these calls
conditional on !p2p_mgmt, but forced p2p_mgmt=1 for cases where the
driver does not use the dedicated P2P Device. Fix this by making the
!p2p_mgmt condition apply only if the driver does indicate use of a
dedicated P2P Device.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-06-30 20:02:25 +03:00
Jouni Malinen
9e6a321815 Fix non-P2P build after the P2P_DEVICE changes
Commit c68f6200a7 added a call to a
function that exists only for P2P builds. Fix that with #ifdef
CONFIG_P2P.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-06-30 13:19:59 +03:00
Arend van Spriel
2e5ba4b6d1 P2P: Derive group interface name bit more sensibly
The interface name for the P2P group interface is derived from the
P2P management interface. When the P2P management interface is a
P2P Device interface, i.e., p2p-dev-wlanX, the name for the group
interface is abbreviated to p2p-X (X being group index). When the
P2P management interface starts with p2p-dev- use its postfix
instead. So P2P management interface p2p-dev-wlan3 results in group
interface name p2p-wlan3-0.

Signed-hostap: Arend van Spriel <arend@broadcom.com>
2013-06-30 10:50:14 +03:00
Arend van Spriel
c68f6200a7 P2P: Create P2P Device interface if supported
If the capability flag of the driver indicates a dedicated P2P Device is
supported, a P2P Device interface is created.

Create the P2P Device in main interface creation loop when the added
interface flags support and P2P supplicant is not yet initialized
avoiding recursion of add_interface.

Do not register l2_packet for P2P Device interface (both for EAPOL and
for TDLS).

Signed-hostap: Arend van Spriel <arend@broadcom.com>
2013-06-30 10:50:14 +03:00
Arend van Spriel
bb4028f165 P2P: Ignore p2p_no_group_iface when driver advertizes P2P_DEVICE support
Setting p2p_no_group_iface means 'use P2P management interface as P2P
connection interface' because it attempts to change the interface type.
The P2P_DEVICE is a dedicated interface and can not be changed. As such
ignore the configuration option.

Signed-hostap: Arend van Spriel <arend@broadcom.com>
2013-06-30 10:50:13 +03:00
Jouni Malinen
080585c01a Add support for OCSP stapling to validate server certificate
When using OpenSSL with TLS-based EAP methods, wpa_supplicant can now be
configured to use OCSP stapling (TLS certificate status request) with
ocsp=1 network block parameter. ocsp=2 can be used to require valid OCSP
response before connection is allowed to continue.

hostapd as EAP server can be configured to return cached OCSP response
using the new ocsp_stapling_response parameter and an external mechanism
for updating the response data (e.g., "openssl ocsp ..." command).

This allows wpa_supplicant to verify that the server certificate has not
been revoked as part of the EAP-TLS/PEAP/TTLS/FAST handshake before
actual data connection has been established (i.e., when a CRL could not
be fetched even if a distribution point were specified).

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-06-30 01:01:15 +03:00
Arend van Spriel
72950ed240 P2P: Remove a call to wpas_p2p_deinit_global()
In wpa_supplicant_deinit(), the function wpas_p2p_deinit_global()
was called. Remove it as it will be called from wpas_deinit_iface()
upon removal of the P2P management interface.

Signed-hostap: Arend van Spriel <arend@broadcom.com>
2013-06-25 13:56:28 +03:00
Chengyi Zhao
8a901d750b D-Bus: Emit signal when a station is authorized or deauthorized
Add "StaAuthorized" and "StaDeauthorized" D-Bus interface in AP mode.
After enabling the AP mode of wpa_supplicant, the other process need to
get the MAC address and authorization status of every station, so
wpa_supplicant emits signal when the station is authorized or
deauthorized.

Signed-hostap: Chengyi Zhao <chengyix.zhao@gmail.com>
2013-06-22 12:09:09 +03:00
Andrei Otcheretianski
9578329874 Add AVG_RSSI report in signal_poll
Add AVG_RSSI report to the signal_poll command if it is reported by
the kernel.

Signed-hostap: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Signed-hostap: Ilan Peer <ilan.peer@intel.com>
2013-06-22 12:01:05 +03:00
Andrei Otcheretianski
2cc8d8f4e8 Add bandwidth and center freq info to signal_poll
Signed-hostap: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Signed-hostap: Ilan Peer <ilan.peer@intel.com>
2013-06-22 12:00:46 +03:00
Alexander Bondar
1e0e943e19 Remove 802.11b rates only in case of P2P group operation
11b rates removal have had impact on SoftAP functionality in
wpa_supplicant. This patch verifies that only in case of P2P group
operation 11b rates will be eliminated. Refer also to commit
4c2c302893.

Signed-hostap: Alexander Bondar <alexander.bondar@intel.com>
Signed-hostap: Ilan Peer <ilan.peer@intel.com>
2013-06-22 11:28:33 +03:00
Jouni Malinen
ec7b97ab00 Interworking: Add support for using eap_proxy offload
Fetch IMSI through eap_proxy for Interworking network selection if
needed.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-06-19 18:42:17 +03:00
Jouni Malinen
aa20e1a1fb Remove CONFIG_NO_WPA2 build parameter
There is not much use for enabling WPA without WPA2 nowadays since most
networks have been upgraded to WPA2. Furthermore, the code size savings
from disabling just WPA2 are pretty small, so there is not much
justification for maintaining this build option. Remove it to get rid of
undesired complexity.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-06-07 20:13:25 +03:00
Jouni Malinen
5d5c4ee5e0 Remove compiler warnings with CONFIG_NO_SCAN_PROCESSING
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-06-07 20:04:56 +03:00
Jouni Malinen
9aaa6955a8 Remove compiler warnings if TDLS is enabled without WPA2
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-06-07 20:04:12 +03:00
Bharat Bhushan
1aef400bf0 IBSS RSN: Implement disconnect() callback using sta_deauth()
This allows driver wrappers to implement disconnection of IBSS peers in
cases operations, e.g., GTK update, fail.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-06-07 13:07:17 +03:00
Wei-Jen Lin
4abc0424ef P2P: Automatic channel selection at re-invocation of persistent GO
If the driver wrapper supports best operation channel indication, the
p2p_group_add command can now use special values (freq=2 and freq=5) to
indicate that the re-invoked persistent GO is to be started on the
specified band.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-06-05 02:06:29 +03:00
Jouni Malinen
e78aaca0da Stop TKIP countermeasures on FLUSH command
This is needed to get wpa_supplicant into clean state during testing if
a test case triggers countermeasures.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-24 16:02:58 +03:00
Jouni Malinen
376204934d wpa_cli: Support tab completion with ifname= prefix
Enable tab completion for the cases where ifname= prefix is used in
interactive mode by skipping over that prefix before running through the
per-command completion routines. The ifname= prefix itself is also
covered by adding the possible interface names to the command list.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-23 20:35:02 +03:00
Jouni Malinen
13b11ba702 wpa_cli: Allow IFNAME= prefix to be used
Strip out the IFNAME=<ifname> prefix from commands before parsing them
through the normal processing and then add the prefix back to the
beginning of the actual control interface command to make per-interface
commands work through the global control interface without having to use
the 'raw' command.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-23 20:04:17 +03:00
Jouni Malinen
ae8535b6e1 WNM: Make ESS Disassoc Imminent event more convenient to use
Define a proper event prefix and include additional information to allow
ESS Dissassociation Imminent event to be used in a wpa_cli action
script.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-23 16:51:03 +03:00
Jouni Malinen
6df634faf9 WNM: Do not reject ESS Disassoc Imminent
This indication is not expected to include candidates, so do not reject
it based on that.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-23 16:50:55 +03:00
Jouni Malinen
7b53acd395 WNM: Use defines for BSS Trans Mgmt field values
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-23 16:50:39 +03:00
Jouni Malinen
dad153d16b Try to use fast-associate on ENABLE_NETWORK
This makes ENABLE_NETWORK behave similarily to SELECT_NETWORK by
allowing a scan to be skipped if recent scan results are available.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-22 16:10:59 +03:00
Jouni Malinen
b06800170a Fix already-associated detection with driver-based BSS selection
wpa_s->pending_bssid is all zeros during connection attempt when
driver-based BSS selection is used. Take this into account when
determining whether new scan results should trigger a connection based
on wpa_s->current_ssid, i.e., a connection attempt with the selected
network instead of selected BSS.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-22 16:10:59 +03:00
Sean Lin
72728c6fa8 P2P: Relax channel forcing for invitation processing with MCC support
When STA interface is connected and P2P interface gets invited in a
different channel from previous P2P group, the invitiation would fail
because of no common channel found. Fix this by using different logic
when device support multi channel concurrency.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-22 13:29:46 +03:00
Jouni Malinen
f65f539d9a GAS: Reduce query timeout to two seconds
The five second timeout for GAS queries is excessive and can result in
long waits in cases where APs are either misconfigured or frames are
lost.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-20 11:09:34 +03:00
Jouni Malinen
7a56af545a GAS: Assign new dialog token even if previous one is free
This makes the design more robust against unexpected duplicates since
each new GAS exchange gets a different dialog token compared to the
previous one.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-20 11:09:16 +03:00
Jouni Malinen
9e1ecab1c5 GAS: Ignore replays if previous frag_id without dropping GAS session
It looks like it may be possible for an older GAS response to get retransmitted
even after the first copy has been processed. While this should not really come
up all the way to wpa_supplicant due to sequence number being same (i.e.,
duplicate detection should from the frame), some cases have been observed where
this did cause issues. Drop such a frame silently without dropping the ongoing
GAS session to allow a frame with the next frag_id to be processed after this.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-20 11:08:47 +03:00
Jouni Malinen
fa7ae9501b Add test code for fetching the last configured GTK
This can be useful for some test cases, so allow wpa_supplicant to be
built with special test functionality to expose the current (last
configured) GTK. This is disabled by default and can be enabled by
adding following line into .config:
CFLAGS += -DCONFIG_TESTING_GET_GTK

The GTK can then be fetched with "wpa_cli get gtk".

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-20 11:00:56 +03:00
Jouni Malinen
576bce9c86 P2P: Direct global ctrl_iface commands automatically for P2P
The P2P management operations like P2P_FIND and P2P_CONNECT are not
really specific to any network interface. These are P2P Device level
operations that are in more global device context. Allow those to be
sent through the global control interface without IFNAME parameter.

For now, these commands are directed within wpa_supplicant to the
network interface that initialized the global P2P context. This may
change in the future if a special context is added for P2P operations.
Anyway, such changes can now be done internally within wpa_supplicant
without affecting this global control interface design from external
view point.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-18 19:41:08 +03:00
Jouni Malinen
c4bf83a723 P2P: No duplicate AP-STA-CONNECTED/DISCONNECTED as global event
These events are sent as a special case to both the group interface and
"parent interface" (i.e., the interface that was used for managing P2P
negotiation). The latter is not really correct event, so get rid of it
with the new global control interface design where there is no need to
support legacy upper layer implementations.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-18 19:18:31 +03:00
Jouni Malinen
92c4465b75 P2P: Mark P2P events global (not specific to interface)
This removes the "IFNAME=<ifname> " prefix from P2P events that are
received through the global control interface since these events are not
really specific to any network interface, but the full device.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-18 18:59:51 +03:00
Jouni Malinen
ed496f131f P2P: Clean up debug prints
Replace direct wpa_msg() calls with p2p_dbg(), p2p_info(), and p2p_err()
calls that use a new debug_print() callback to handle actual debug
printing outside the P2P module.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-18 18:47:36 +03:00
Jouni Malinen
710ae9ac1f P2P: Move p2p_find stopped event message into p2p_supplicant.c
This removes wpa_ctrl.h dependency from src/p2p/* and makes the P2P
events more consistent, i.e., everything that is aimed for upper layer
processing from the wpa_supplicant control interfaces is generated in
p2p_supplicant.c.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-18 16:06:40 +03:00
Jouni Malinen
47bfe49c31 Add wpa_msg_global() for global events
This function can be used instead of wpa_msg() and wpa_msg_ctrl() to
indicate that an event is not specific to a network interface.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-18 14:19:24 +03:00
Jouni Malinen
214e428b42 Allow global ctrl_iface monitors
The ATTACH/DETACH mechanism to request event messages from
wpa_supplicant can now be used through the global control interface,
too. This results in events from all interfaces being delivered through
a single monitor socket. "IFNAME=<ifname> " prefix is used on events
that are specific to an interface.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-18 14:07:28 +03:00
Dmitry Shmidt
89c7ac570b wpa_cli: Set buffer length the same as in wpa_supplicant_ctrl_iface_process()
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2013-05-18 12:21:44 +03:00
Jouni Malinen
faf9a8585d Add band option (2.4 vs. 5) for filtering scans
This can be used to implement filtering of channels for scan and based
on that, for connection, purposes.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-18 12:17:10 +03:00
Jouni Malinen
b83b1b2da8 Android: Clarify keystore include directories
This updates hostapd to build using the new keystore header file
location and adds a note that the old frameworks/base/cmds/keystore can
be removed at some point in the future when old Android releases do not
need to be supported.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-18 12:03:35 +03:00
Jouni Malinen
d2a9e2c76d Abstract and Android sockets for global ctrl_iface
The wpa_supplicant global control interface parameter can now be used to
explicitly specify an abstract UNIX domain socket (Linux specific
extension) with "@abstract:" prefix and an Android control socket with
"@android:" prefix.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-18 11:42:09 +03:00
Jouni Malinen
6fd5ceaf70 wpa_cli: Allow global interface to be used in interactive mode
This is mostly a corner case at this point, but if wpa_cli was started
with global control interface connection (-g) and interactive mode,
per-interface control interface was tried to be opened with the
previously opened global ctrl_iface connection gettign leaked.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-18 11:40:23 +03:00
Jouni Malinen
2925756575 wpa_supplicant: Add -G argument to specify global ctrl group
The optional -G<group> command line argument can be used to specify the
group that can access the global control interface.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-18 11:00:05 +03:00
Jouni Malinen
cf3bebf28c Allow global ctrl_iface to be used for per-interface commands
"IFNAME=<ifname> " prefix can now be used on the wpa_supplicant global
control interface to direct a command to a specific interface instead of
having to use an interface specific control interface for this. This
allows a single socket to be used for controlling multiple virtual
interfaces.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-18 10:19:38 +03:00
Suryadevara Sudheer
c6ccf12d3f P2P: Use preferred channel list during GO creation
This extends support for p2p_pref_Chan configuration parameter for
autonomous GO creation.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-17 11:27:02 +03:00
Yufeng Wang
010b5f9bfc P2P: Fix p2p_pref_chan setting from configuration file
Commit 21d996f775 added p2p_pref_chan as a
configuration file parameter, but included only the case of dynamically
setting this at runtime through the control interface SET command.
Complete this functionality by taking this value into use directly from
the configuration file, too.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-17 11:03:52 +03:00
Daniel Gnoutcheff
d7692b8d1c dbus: Terminate cleanly on messagebus shutdown
By default, dbus_connection_dispatch() will call _exit() if the bus
connection has been closed. This caused wpa_supplicant to terminate
without properly cleaning up after itself.

To ensure that we terminate cleanly when the messagebus terminates,
override the exit_on_disconnect behavior and install a filter to handle
libdbus's "Disconnected" signal.

[Bug 474]

Signed-hostap: Daniel Gnoutcheff <daniel@gnoutcheff.name>
2013-05-16 20:47:28 +03:00
Vinayak Kamath
e2396a684e WNM: Enable CONFIG_WNM in Android.mk
Signed-hostap: Vinayak Kamath <vkamat@codeaurora.org>
2013-05-16 17:51:18 +03:00
Vinayak Kamath
65bcd0a92d WNM: Add sending of BSS Transition Management Query
The new control interface command can be used to send a
BSS Transition Management Query frame to the current AP.

Signed-hostap: Vinayak Kamath <vkamat@codeaurora.org>
2013-05-16 17:50:31 +03:00
Vinayak Kamath
e27d20bb68 WNM: Add neighbor report processing for BSS Transition Management
Process the neighbor report received in BSS Management Request frames.

Signed-hostap: Vinayak Kamath <vkamat@codeaurora.org>
2013-05-16 17:48:59 +03:00
Jouni Malinen
f3e907a745 WPS: Clear connection failure counts on WPS success
The WPS provisioning case does not result in successful connection by
design and as such, this can result in networks getting temporarily
disabled. Avoid this by clearing the failure counts on WPS success.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-15 17:33:50 +03:00
Jouni Malinen
170f5663dc WPS NFC: Connect using learnt credential after NFC Tag read
Instead of just adding the new network, prefer the network learnt from a
configuration token during the first connection attempt. This makes the
WPS NFC case behave similarly to the in-band provisioning cases if there
are more preferred networks in the scan results.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-15 16:46:45 +03:00
Jouni Malinen
e679f140b9 Mark interface disconnected on removal request
This cleans up debug log by not trying to process the disconnection
event as a failure that could result in blacklist addition and auto
connect attempt. These are pointless operations since the interface is
going to removed immediately after this.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-12 19:18:55 +03:00
Jouni Malinen
3636b891b7 Do not try auto connect mechanism in disconnected state
This cleans up debug log by not requesting the auto connect on
dissassociation event if we are already in disconnected state and would
not try to connect anyway.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-12 19:18:55 +03:00
Jouni Malinen
0cdb93fe9f Do not add BSS to blacklist on local disconnection request
There is no point in marking a BSS temporarily blacklisted based on a
connection failure or disconnection case if that happens as a result of
a local request to disconnect. The blacklist entry could result on
unexpected BSS getting selected on the next connection attempt. In
addition, the code to try to find another BSS within the ESS could
result in scanning a single channel on the next attempt. Fix these
issues by handling the connection failure events only if we are not in
disconnected state (i.e., would try to reconnect after this
automatically).

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-12 19:18:55 +03:00
Deepthi Gowri
36b9883d84 Defer scan if connection is in progress on any of the shared interfaces
Scanning can delay concurrent operations considerably, so it is better
to avoid that while trying to connect on any of the virtual interfaces
that share the same radio.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-10 16:10:50 +03:00
Ben Greear
6124e858fd wpa_supplicant: Allow vifs to scan only current channel
If a VIF is already associated, then only scan on the associated
frequency if user requests such. This is a big help when using
lots of virtual stations.

Signed-hostap: Ben Greear <greearb@candelatech.com>
Signed-off-by: Ben Greear <greearb@candelatech.com>
2013-05-09 12:43:40 +03:00
Arend van Spriel
893a0a558c systemd: Fix systemd interface alias
In the systemd interface templated the alias entry was specified
with wlan0 hard coded. Changing it to %i in this patch. [Bug 477]

Reported-by: zg <ml@mail.tsaitgaist.info>
Signed-hostap: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
2013-05-09 11:25:48 +03:00
Jouni Malinen
6ea1f4135b Try to set WPA-None key after IBSS-joined event
cfg80211 rejects the set_key operations before the IBSS network has been
fully formed, so add one more attempt to set the key for WPA-None at
IBSS joined driver event.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-07 18:14:56 +03:00
Jouni Malinen
66562e9c75 Use cached driver capabilities instead of new fetch for each operation
There is no need to repeat the driver capability fetch for each
operation since we already cache driver flags in wpa_s->drv_flags.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-07 17:36:40 +03:00
Sheng Fang
4aa8186806 Add a configration parameter for sched_scan interval
The new sched_scan_interval parameter can be used to set the default
sched_scan interval, e.g., for power saving purposes.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-07 12:41:14 +03:00
Jouni Malinen
f11b72c3e9 TDLS: Move AID=1 workaround into driver_nl80211.c
The use of AID=1 for the nl80211 dummy STA case is specific to the
driver (cfg80211), so better move this into the driver wrapper instead
of generic TDLS implementation.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-06 15:57:03 +03:00
Sunil Dutt
785336998d TDLS: Pass peer's AID information to kernel
The information of the peer's AID is required for the driver to
construct partial AID in VHT PPDU's. Pass this information to the driver
during add/set station operations (well, as soon as the information is
available, i.e., with set station operation currently).

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-06 15:47:44 +03:00
Jouni Malinen
55a2df4389 HS 2.0: Include HS 2.0 Indication element only for HS 2.0 association
The Hotspot 2.0 specification seems to mandate this element to be
included in all (Re)Association Request frames if the station is Hotspot
2.0 capable. However, that results in conflicts with other requirements
like no TKIP use when this element is present. The design is really
supposed to include the indication element only for Hotspot 2.0
associations regardless of what the current specification implies.
Remove the HS 2.0 Indication element from (Re)Association Request frame
whenever the connection is not for Hotspot 2.0 purposes.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-05 16:29:21 +03:00
Jouni Malinen
9be371437e wpa_cli: Fetch the current BSSID list when starting interactive mode
This makes tab completion work better in cases where wpa_cli is started
after wpa_supplicant has already discovered BSSes.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-05 12:38:55 +03:00
Jouni Malinen
69aa33411e wpa_cli: Add BSSID tab completion for set bssid_filter
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-05 12:20:35 +03:00
Jouni Malinen
215658726f wpa_cli: Replace set command help with completion routine
The old help text did not include most of the parameters and as such,
was not really helpful. Replace it with tab completion function that
includes more or less all available parameters.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-05 12:18:43 +03:00
Jouni Malinen
f1fb042cec wpa_cli: Allow space in the set command value
Previously, interactive mode could not be used to enter space-separated
lists with the set command. This removes that restriction and allows
such commands to be encoded properly.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-05 11:53:20 +03:00
Ben Greear
f5ffc348dc wpa_supplicant: Allow global scan frequencies configuration
This allows one to limit the channels that wpa_supplicant will
scan. This is a useful addition to the freq_list configurable
in the network {} section.

Signed-hostap: Ben Greear <greearb@candelatech.com>
2013-05-05 11:46:54 +03:00
Jouni Malinen
abfc3ad9af Synchronize build config comments for wpa_supplicant
This updates number of comments in android.config to match the latest
version in defconfig and adds some of the entries that were previously
present only in android.config into defconfig.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-04 20:19:50 +03:00
Jouni Malinen
a01e10da68 Android: Enable WPS ER and NFC support in the build
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-04 20:19:47 +03:00
Jouni Malinen
0f105f9e5f HS 2.0: Move Probe Request Indication IE addition to proper place
This needs to be in wpa_supplicant_extra_ies() to get consistent
behavior for both scan and sched_scan cases.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-04 11:57:56 +03:00
Ilan Peer
41b1a76a96 P2P: Clone beacon_int when initializing new group interface
Signed-hostap: Ilan Peer <ilan.peer@intel.com>
2013-05-04 11:25:29 +03:00
Vinayak Kamath
741ed9fc25 WPS: Remove duplicate networks after WPS
Each attempt to connect to the same network using WPS would result
in the duplicate configuration getting added. Avoid such redundant
additions by comparing the network configuration with an already
existing one and remove the older network if the new credential
provisioned through WPS is identical.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-04-30 13:35:50 +03:00
Jouni Malinen
b57b560034 wpa_supplicant: Default to nl80211 instead of wext
nl80211 has obsoleted WEXT as the preferred kernel interface for
controlling wireless drivers. Update wpa_supplicant driver interface
list order so that nl80211 gets used first if both nl80211 and wext
interfaces are included in the build. In addition, update README to
reflect the fact that WEXT is obsolete.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-04-29 16:55:44 +03:00
Jouni Malinen
a8a7890d7c Clear extra_blacklist_count on FLUSH command
This is needed to avoid old blacklist failure counts from being valid
after state flush.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-04-28 22:35:15 +03:00
Jouni Malinen
5e24dc8a4b Add dup_binstr() to help common binary string tasks
There are quite a few places in the current implementation where a nul
terminated string is generated from binary data. Add a helper function
to simplify the code a bit.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-04-27 23:44:59 +03:00
Jouni Malinen
04382f7d6f NFC: Add no waiting and no multiple operations options for scripts
The nfcpy script used to be run in a way that left them running for
multiple operations. This is not desired for some use cases, so provide
options to request only a single operation to be performed.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-04-27 22:15:23 +03:00
Jouni Malinen
28fcfb67c0 NFC: Increase wpa_cli command buffer size
NFC connection handover messages may be longer than 100 octets, so
increase wpa_cli buffer size to allow longer messages to be reported.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-04-27 22:14:45 +03:00
Jouni Malinen
e864c0aefe Use a common frequency to channel conversion function
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-04-27 22:11:51 +03:00
Deepthi Gowri
02db75b6c2 FT: Reset FT flag upon STA deauthentication
Reset ft_completed if STA receives deauthentication
between FT reassoc success and the subsequent initial
mobility authentication and association.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-04-26 17:56:24 +03:00
Jouni Malinen
dd57970477 Disable network temporarily on repeated connection failures
Previously, only explicit indications of authentication failures were
used to disable a network block temporarily. Extend this to use multiple
failed connection attempts as a sign of a possible authentication or
authorization failure to reduce the frequency of connection attempts
with a network that does not seem to allow connection.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-04-25 17:28:50 +03:00
Jouni Malinen
06b7f58def RSN: Update preauth scan results only based on new scan results
The fast-connect optimization to skip a new scan did not update how the
RSN preauthentication callback is used. There is no point in trying to
add preauthentication candidates from cases where scan was skipped, so
skip this call, too, in such cases.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-04-23 18:24:00 +03:00
Jouni Malinen
18e00b5e4d Move wpa_s freeing into wpa_supplicant_deinit_iface()
All wpa_supplicant_deinit_iface() callers ended up freeing wpa_s
immediately after this call. Move os_free(wpa_s) into the deinit
function to share the same call and make the deinit sequence clearer.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-04-23 18:07:41 +03:00
Paul Stewart
754632c965 dbus_new: Add EAP logon/logoff
Add "EAPLogoff" and "EAPLogon" interface DBus commands which
parallel the "logoff" and "logon" wpa_ctrl commands which terminate
and restart EAP authentication.  Slightly enhance the "logon" case
by expiring any running "startWhile" timer.

Signed-hostap: Paul Stewart <pstew@chromium.org>
2013-04-23 17:57:55 +03:00
Dmitry Shmidt
e6304cad47 wpa_supplicant: Add option -I for additional config file
This option can be used only for global parameters that are not going
to be changed from settings.

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
Signed-off-by: Iliyan Malchev <malchev@google.com>
2013-04-23 17:38:57 +03:00
Bruno Randolf
060605226f wpa_supplicant: Add get_capability freq
Add "get_capability freq" command to print a more verbose list of
channels and frequencies in MHz. The tag "NO_IBSS" is added, if IBSS
mode is not allowed on a channel. This allows userspace programs to get
the frequencies and limitations associated with each channel.

This extends the information already provided in "get_capability
channels" but a new interface is chosen because of backwards
compatibility considerations.

Signed-hostap: Bruno Randolf <br1@einfach.org>
2013-04-23 16:55:54 +03:00
Chris Hessing
c7a39ba4e1 Provide TLS alerts to CLI/UI over control interface
Harmonize EAP status events over control interface to provide same
functionality as existing D-Bus callback.

Signed-hostap: Chris Hessing <chris.hessing@cloudpath.net>
2013-04-23 16:46:02 +03:00
Jouni Malinen
2a07a276ec P2P: Increase GTK rekeying period to 24 hours
Strong ciphers do not need frequent rekeying, so increase the default
GTK rekeying period to 24 hours.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-04-23 14:11:10 +03:00
Jouni Malinen
88c8bf311e WPS NFC: Allow configuration token to be built from network block
"WPS_NFC_CONFIG_TOKEN <WPS/NDEF> <network id>" can now be used to build
an NFC configuration token from a locally configured network.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-04-01 21:28:57 +03:00
Jouni Malinen
e205401c72 WPS ER: Allow Enrollee to be specified with MAC address
wps_er_pbc and wps_er_pin can now be used with both the UUID and MAC
Address of the Enrollee.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-04-01 20:52:44 +03:00
Jouni Malinen
c44a19c1f9 WPS ER: Document additional NFC command for ER operations
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-04-01 20:36:15 +03:00
Jouni Malinen
59307b3007 WPS ER: Allow AP to be specified with BSSID
This extends the WPS ER commands that previously accepted only UUID as
an identifier for an AP to use either UUID or BSSID for this.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-04-01 20:32:09 +03:00
Jouni Malinen
5c9d63d46f WPS: Be more careful with pre-configured DH parameters
Make the implementation more robust against error cases with
pre-configured DH parameters.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-04-01 19:27:32 +03:00
Jouni Malinen
17b8995cf5 Interworking: Try to use same BSS entry for storing GAS results
There may be cases where multiple BSS entries for a single BSSID are in
the table. This is mostly in automated test cases due to the AP
configuration changes, but something similar could potentially happen as
a corner case in more realistic networks, too, e.g., when an AP changes
its operating channel. Make network selection more robust by trying to
find the exact BSS entry instead of any BSS entry with a matching BSSID
when storing GAS/ANQP response.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-04-01 11:44:04 +03:00
Jouni Malinen
3db5439a5f Optimize Extended Capabilities element to be of minimal length
Leave out zero octets from the end of the element.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-31 21:58:17 +03:00
Johannes Berg
8cd6b7bce8 hostapd/wpa_s: Use driver's extended capabilities
Some extended capabilities (I'm currently interested in "Operating Mode
Notification" for VHT) are implemented by the kernel driver and exported
in nl80211. Use these in hostapd/wpa_supplicant.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-03-31 21:51:44 +03:00
Jouni Malinen
acb546436a Add ctrl_iface command FLUSH for clearing wpa_supplicant state
This is mainly for testing purposes where it is convenient to have an
easy way of getting wpa_supplicant state cleared between test cases.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-31 20:31:07 +03:00
Masashi Honma
97236cee6a WPS: Skip rescanning after provisioning if AP was configured
If WPS provisioning step is completed with an AP that is in WPS
configured state, we can skip a second scan after the provisioning step
since the AP is unlikely to change its configuration in such a case.
This can speed up WPS connection a bit by removing an unneeded scan.

Signed-hostap: Masashi Honma <masashi.honma@gmail.com>
2013-03-31 20:06:42 +03:00
Jouni Malinen
4342326fc7 Add ignore_old_scan_res configuration parameter
This can be used to configure wpa_supplicant to ignore old scan results
from the driver cache in cases where such results were not updated after
the scan trigger from wpa_supplicant. This can be useful in some cases
where the driver may cache information for a significant time and the AP
configuration is changing. Many such cases are for testing scripts, but
this could potentially be useful for some WPS use cases, too.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-31 18:05:42 +03:00
Jouni Malinen
9599ccc2dd WPS: Clear after_wps on new WPS connection
The after_wps counter could have potentially be left in its old non-zero
value in some WPS sequences which could result in a single-channel scan
being used based on obsolete information. Clear after_wps in
wpas_wps_reassoc() to make sure this does not happen.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-31 18:05:42 +03:00
Jouni Malinen
702621e6dd WPS: Use latest updated BSS entry if multiple BSSID matches found
If the AP (P2P GO) has changes its channel of SSID recently, the BSS
table may have multiple entries for a BSSID. Select the one which was
most recently updated for WPS/P2P operations in such case to increase
the likelihood of using current information.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-31 18:05:42 +03:00
Jouni Malinen
2f9b66d3ab Extend ROAM command to handle multiple SSIDs per BSS
Select the BSS entry based on BSSID,SSID pairs instead of just BSSID to
avoid selecting an unexpected SSID for the ROAM command.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-30 11:49:05 +02:00
Jouni Malinen
ef8151ac57 P2P: Write p2p_ignore_shared_freq to configuration file on updates
Commit b277a2bebc added a new global
configuration parameter, but forgot to update configuration file saving
to store this.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-03-26 22:24:41 +02:00
Jouni Malinen
18a2eaabe3 Add ap_vendor_elements for wpa_supplicant AP/P2P GO mode
This new parameter allows wpa_supplicant AP mode operations to use
similar design to the vendor_elements parameter in hostapd to add
vendor_elements into Beacon/Probe Response IE parameters.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-03-21 15:52:41 +02:00
Jouni Malinen
407be00b6c P2P: Postpone P2P scan only if station mode scan is pending
sta_scan_pending was supposed to be accurate enough for determining
whether a P2P scan needs to be postponed. However, it has turned out
that there were cases where sta_scan_pending was not cleared properly.
While the known cases have now been addressed, it is possible that some
other cases may still exist. To avoid issues with P2P operationg getting
stuck, verify more carefully that there is a real pending station mode
scan (either in progress or scheduled to be requested).

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-03-18 17:32:31 +02:00
Jouni Malinen
cfd31b5026 Use special scan result processing steps only on requesting interface
Scan result events are shared between all virtual interfaces sharing the
same radio. However, some of the steps are not really appropriate on
virtual interfaces that did not issue the scan request. Fix this by
making these steps conditional on the scan results being processed on
the interface that requested them.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-03-18 17:32:31 +02:00
Jouni Malinen
b1cd021e29 P2P: Re-start P2P operation if station mode scanning is stopped
There were couple of code paths that could end up stopping station mode
scanning without clearing sta_scan_pending. This could result in P2P
search getting stuck waiting for completion of station mode scan which
would never show up. Fix this by calling wpas_p2p_continue_after_scan()
in cases where station mode scans are stopped. This allows
sta_scan_pending to be cleared and P2P search operation continued.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-03-18 17:32:31 +02:00
Jouni Malinen
f85f545e71 P2P: Use common function for re-starting P2P scan after station scan
Make the implementation more consistent and cleaner by using a single
function for addressing all the cases where completion of a station mode
scan operation allows a P2P operation (search) to be re-started.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-03-18 17:32:31 +02:00
Jouni Malinen
095da179de Android: Enable WNM in the build
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-17 20:19:44 +02:00
Jouni Malinen
ce9283a401 Android: Use CONFIG_WNM mode consistently
Replace CONFIG_IEEE80211V with CONFIG_WNM to get more consistent build
options for WNM-Sleep Mode operations. This is similar to the Makefile
change in commit ad3872a372.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-17 20:13:46 +02:00
Jouni Malinen
69586aa312 Android: Fix CONFIG_WNM use in Android.mk
This code was within ifdef CONFIG_AP and did not get included unless
AP mode support was also enabled. This is similar to the Makefile
change in commit 2dfb9a447c.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-17 20:10:44 +02:00
Jouni Malinen
3b335329b9 Android: Update Android.mk based on Makefile changes
This brings the Android makefiles a bit closer to the Makefile changes
that had been missed in the past.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-17 20:08:23 +02:00
Jouni Malinen
c3aa4da94d Convert WPS NFC python scripts from using wpactrl to wpaspy
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-16 21:47:10 +02:00
Partha Narasimhan
b2a12c4f93 wpa_supplicant: Fix lookup of cached PMKSA
This fixes the lookup of a usable PMKSA entry in the cache. Using
wpa_s->current_ssid often returns nothing when a usable PMKSA exists in
the cache since wpa_s->current_ssid does not necessarily point to the
correct network entry at this point in time (prior to association).

Signed-hostap: Partha Narasimhan <parthan@gmail.com>
2013-03-16 12:45:31 +02:00
Bruno Randolf
65d52fc103 Add capability flag for IBSS and add get_capability modes
Add a driver capability flag for drivers which support IBSS mode and set
it for nl80211 drivers which have set the NL80211_IFTYPE_ADHOC.

Add a new option "modes" to "get_capability" which will return "AP" and
"IBSS" if the corresponding capability flags are set.

The idea is that this can be used for UIs to find out if the driver
supports IBSS mode.

Signed-hostap: Bruno Randolf <br1@einfach.org>
2013-03-16 12:42:15 +02:00
Jouni Malinen
21f01a8e3d Fix build with CONFIG_NO_CONFIG_BLOBS
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-16 12:20:21 +02:00
Solomon Peachy
7d37a357fa Fix build without CONFIG_CTRL_IFACE or CONFIG_NO_STDOUT_DEBUG
Signed-off-by: Solomon Peachy <pizza@shaftnet.org>
2013-03-16 12:07:18 +02:00
Jouni Malinen
dbca75f82a P2P: Remove persistent group peer if it rejects invitation
If a peer replies to persistent group invitation with status code 8
(unknown group), remove the peer from the p2p_client_list if we are the
GO or remove the persistent group if we are the P2P client since it
looks like that the peer has dropped persistent group credentials and
the provisioning step needs to be executed again.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-03-15 16:43:06 +02:00
Jouni Malinen
b277a2bebc P2P: Allow shared interface channel preference to be ignored
p2p_ignore_shared_freq=1 in the configuration file (or "SET
p2p_ignore_shared_freq 1" on control interface) can now be used to
configure wpa_supplicant to ignore the preference on shared operating
channel when the driver support multi-channel concurrency. The default
behavior is to try to start any new P2P group on an operating channel
that is already in use on another virtual interface to avoid extra cost
from hopping between multiple channels. If this new parameter is set to
1, such preference is not used and instead, the channel for the new P2P
group is selected based on other preferences while ignoring operating
channels of any concurrent connection.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-03-14 16:32:35 +02:00
Jouni Malinen
6cb27aa85f P2P: Fix shared frequency preference for concurrent operations
Commit 50285f5ca8 changed number of rules
in channel selection and among other things, it broke the design where
the currently used operating channel on a virtual interface that is
shared by the same radio is preferred to avoid costs related to
multi-channel concurrency. Fix this regression by making the P2P module
aware of the shared channel and using that preference as the highest
priority when re-selecting the channel during negotiation.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-03-14 16:26:55 +02:00
Jouni Malinen
a70a52c316 P2P: Allow all channels for multi-channel concurrency (no negotiation)
Commit 79879f4ae8 enabled all channels to
be used when negotiating channel with a driver that supports
multi-channel concurrency. Extend that to cover cases where the channel
is not being negotiated (e.g., p2p_group_add to start a GO).

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-03-14 15:38:11 +02:00
Jouni Malinen
b6714ca1bb Fix compiler warning when CONFIG_IEEE80211R is not included
Commit 6a1ce39599 moved the bssid
variable declaration to be outside CONFIG_IEEE80211R block and
triggered a compiler warning about unused variable.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-03-13 12:40:57 +02:00
Jouni Malinen
94d7acf3df WPS NFC: Fix build without CONFIG_WPS_ER
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-03-13 00:02:52 +02:00
Deepthi Gowri
ee9a95c34e Android: Enable IEEE 802.11r in wpa_supplicant builds
Signed-off-by: Deepthi Gowri <deepthi@codeaurora.org>
2013-03-12 20:09:41 +02:00
Deepthi Gowri
6a1ce39599 FT: Add support for IEEE 802.11r with driver-based SME
Add NL80211_CMD_UPDATE_FT_IES to support update of FT IEs to the
WLAN driver. Add NL80211_CMD_FT_EVENT to send FT event from the
WLAN driver. This will carry the target AP's MAC address along
with the relevant Information Elements. This event is used to
report received FT IEs (MDIE, FTIE, RSN IE, TIE, RICIE).

Signed-off-by: Deepthi Gowri <deepthi@codeaurora.org>
2013-03-12 20:08:53 +02:00
Vivek Natarajan
c9c77083b3 P2P: Clear p2p_in_provisioning flag on group removal
Commit 77dfafd07d cancels group formation
timeout on group removal case but failed to reset the
p2p_in_provisioning flag. This can lead to repeated p2p_find failures if
the group gets removed before completion of the WPS provisioning step
(e.g., GO tears down the group). Fix this by clearing
p2p_pin_provisioning when cancelling group formation.

Signed-hostap: Vivek Natarajan <nataraja@qca.qualcomm.com>
2013-03-11 20:47:24 +02:00
Chet Lanctot
9210bea172 Android: Enable IEEE 802.11w support in the build
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-03-11 13:52:13 +02:00
Chet Lanctot
3ee9ade6cf Allow SME SA Query to be used by all drivers
The unprotected disconnection events were previously processed only for
drivers that used the wpa_supplicant SME implementation (separate
authentication and association commands). However, this can be useful
for drivers that use the connect API, so remove the limitation and allow
the same IEEE 802.11w SA Query mechanism to be used even without full
use of the wpa_supplicant SME.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-03-11 13:49:40 +02:00
Jouni Malinen
5139008b51 Android: Sync makefile changes for HT/VHT overrides
CONFIG_HT_OVERRIDES and CONFIG_VHT_OVERRIDES were already mentioned in
android.config, but Android.mk did not yet know about them.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-10 18:05:40 +02:00
Johannes Berg
e9ee8dc394 wpa_supplicant: Support VHT capability overrides
Add support for VHT capability overrides to allow testing connections
with a subset of the VHT capabilities that are actually supported by
the device. The only thing that isn't currently supported (by mac80211
and this code) is the RX/TX highest rate field.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-03-10 18:04:39 +02:00
Johannes Berg
eae3a584f5 wpa_supplicant: Parse int values in different bases and reject invalid
Instead of using atoi(), use strtol() which allows checking if
the configuration values are valid integers and can understand
more than just decimal (also hexadecimal and octal). This not
only allows specifying some fields in hex (which can be useful)
but also rejecting invalid configurations, e.g.,
        disassoc_low_ack=27 * 2
which was previously read as just 27.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-03-10 17:55:24 +02:00
David Spinadel
725fc39e07 wpa_supplicant: Reschedule sched scan after network change
Stop sched scan, if running, after any disabling or removing of
a network, and request a new scan if needed.

Signed-hostap: David Spinadel <david.spinadel@intel.com>
2013-03-10 17:51:13 +02:00
Jouni Malinen
14f7907890 Remove unnecessary local variable
The ssid parameter (if NULL) can be used for the loop, too, to make the
code look a bit prettier.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-10 17:45:15 +02:00
David Spinadel
dca1a51149 wpa_supplicant: Handle enabling of one or all networks equally
Move enabling a network to a separate function. Try to reconnect if not
associated to an AP. Abort scheduled scan in any case of a new scan.

Signed-hostap: David Spinadel <david.spinadel@intel.com>
2013-03-10 17:43:00 +02:00
David Spinadel
7ed52f678b wpa_supplicant: Save prev_sched_ssid only if needed
If the whole ssid list was scanned, don't save the prev scheduled ssid
since we are going to start from beginning. Thos avoids starting sched
scan from prev_sched_ssid after scanning the full list, in case of
adding a network to ssid during scheduled scan.

Signed-hostap: David Spinadel <david.spinadel@intel.com>
2013-03-10 17:32:03 +02:00
David Spinadel
a09fc1ccf8 wpa_supplicant: Do not allow too short sched scan
In case that the ssid list is longer than max number of ssids,
ths scheduled scan aborted after timeout and rescheduled again
with shorter timeout and longer interval. In case that the timeout
is shorter than the interval, only one scan iteration will
be run. In this case, go back to the initial values.

Signed-hostap: David Spinadel <david.spinadel@intel.com>
2013-03-10 17:27:48 +02:00
Jouni Malinen
77e4e85321 P2P: Mark peer authorized for persistent group invitation
When p2p_invite persistent=<id> is used to request a persistent group to
be re-invoked, the peer may reply with status=1 (info not yet available)
if upper layer processing of the invitiation is requested. The peer is
ten expected to start another invitation exchanged within 120 seconds if
the user authorizes the connection. Allow this process to be used more
easily by automatically authorizing the peer that we tried to invite to
use this second invitation sequence even if persistent_reconnect=0.

For this mechanism to work, the device that starts the invitation needs
to start listen mode to be able to receive the invitation request from
the peer. At least for now, this is not done automatically, but future
changes could potentially enable this automatically at least if there
are no concurrent operations in progress.

Example sequence on the initiator:

cmd: P2P_INVITE persistent=1 peer=<addr>
event: P2P-INVITATION-RESULT status=1
cmd: P2P_LISTEN 120
wait for peer to start another invitiation round.. group will be
re-invoked automatically

On the peer (with persistent_reconnect=0):

event: P2P-INVITATION-RECEIVED sa=<addr> persistent=1 [freq=<MHz>]
wait for user approval
cmd: P2P_INVITE persistent=1 peer=<addr>
group will be re-invoked automatically

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-03-01 21:32:33 +02:00
Jouni Malinen
cd1e2309a2 P2P: Indicate frequency for upper layer invitation processing
When a device that is a GO in a persistent group receives an Invitation
Request from a P2P client and persistent_reconnect=0, upper layer is
notified of this with P2P-INVITATION-RECEIVED event. The upper layer is
supposed to run another invitation exchange is this case, but if that
does not happen and the GO is started without successful (status=0)
invitation exchange, the operating channel for the group may end up
getting set in a way that the P2P client is not able to support. Provide
optional freq parameter in the P2P-INVITATION-RECEIVED event on the GO
side. If this parameter is received and the upper layer decides to issue
P2P_GROUP_ADD command, that command should include this freq parameter
to make sure the operating channel gets selected from the set that the
peer can support.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-03-01 21:27:31 +02:00
Jouni Malinen
18206e02c5 Allow wpa_supplicant AP mode to configure Beacon interval
beacon_int (in TU) can now be used to configure Beacon interval for AP
mode operations (including P2P GO) in wpa_supplicant. This can be set
either in a network block or as a global parameter in the configuration
file (or with "SET beacon_int <value>" control interface command) to
apply for all networks that do not include the beacon_int parameter to
override the default.

In addition, this commits extends the dtim_period parameter to be
available as a global parameter to set the default value. dtim_period is
now stored in the configuration file, too, if it was set.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-03-01 20:50:08 +02:00
Jouni Malinen
5473362458 P2P: Use peer's channel list to limit GO freq on invitation
Peer device includes its list of allowed operating channels in the
Invitation Response frame. When we are becoming the GO, use that list
from the peer to filter out acceptable channels to avoid selecting a
channel that the peer is unable to use.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-03-01 20:01:01 +02:00
Jouni Malinen
f5877af01e P2P: Allow P2P client to specify preferred group channel
When re-invoking a persistent group in P2P client role, the new
pref=<MHz> parameter can now be used with the p2p_invite command to
indicate a preferred operating frequency. Unlike the older freq=<MHz>
parameter, this leaves GO an option to select another channel (from our
supported channels) if the GO cannot accept the channel.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-03-01 19:40:54 +02:00
Jouni Malinen
5de4b72177 P2P: Use shared function for setting up frequencies
p2p_connect() and p2p_invite() cases used more or less identical
implementatin. Use a shared function to avoid duplicated code.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-03-01 18:40:39 +02:00
Deepthi Gowri
79879f4ae8 P2P: Allow all channels in case of multi channel concurrency
If multi channel concurrency is supported, we have to populate the
p2p_channels with list of channels that we support. Use the same design
that was previously added for GO Negotiation.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-03-01 18:40:39 +02:00
Jouni Malinen
ff48691368 Avoid partial BSS entries in control interface
Most of the print_bss_info() cases were already returning zero lenth to
avoid returning partial returns to the BSS commands, but the HS 2.0 and
Wi-Fi Display entries behaved differently. Make those consistent with
rest of the items.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-28 18:49:33 +02:00
Dmitry Shmidt
cfd42c94ee Mark last BSS entry by #### instead of ====
This allows ctrl_iface users to iterate through the BSS entries by
fetching multiple BSS entries with "BSS RANGE=N-" without having to use
one extra round to get empty return value as the indication of the last
entry having been found.

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2013-02-28 18:46:06 +02:00
Dmitry Shmidt
c667342933 Add WPA_BSS_MASK_DELIM flag to BSS command
This flag will add ==== delimiter between to separate bss results.
Unlike the other BSS command MASK values, this delimiter is not
included by default to avoid issues with existing users of the BSS
command.

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2013-02-28 18:43:05 +02:00
Masashi Honma
5e24beae02 Use scan results for reconnection
This patch uses existing scan results for fast connection on REASSOCIATE
and RECONNECT commands.

Signed-hostap: Masashi Honma <masashi.honma@gmail.com>
2013-02-28 16:34:08 +02:00
Masashi Honma
ad5dda8222 Interworking: Remove unused variable warnings
This patch removes these warnings.

interworking.c: In function 'interworking_credentials_available_3gpp':
interworking.c:1330:6: warning: unused variable 'ret' [-Wunused-variable]
interworking.c:1329:19: warning: unused variable 'cred' [-Wunused-variable]

Signed-hostap: Masashi Honma <masashi.honma@gmail.com>
2013-02-28 16:34:06 +02:00
Jouni Malinen
aec309c407 wpa_cli: Increase receive buffer from 2048 to 4096 bytes
wpa_supplicant uses 4096 byte buffer for control interface responses, so
wpa_cli should do the same to avoid truncating responses unnecessarily.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-27 15:59:55 +02:00
Sunil Dutt
f8361e3d68 TDLS: Pass peer's VHT Capability information during sta_add
The information of the peer's VHT capability is required for the
driver to establish a TDLS link in VHT mode with a compatible peer.
Pass this information to the driver when the peer station is
getting added.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-25 10:31:50 +02:00
Jouni Malinen
f23ce1f032 WPS: Add AP mode NFC connection handover with wpa_supplicant/nfcpy
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-24 10:57:06 +02:00
Jouni Malinen
f3f2ba2e6e WPS NFC: Add connection handover support for ER
wpa_supplicant can now generate the WPS carrier record for connection
handover response when acting as an ER. The AP whose configuration is
provided in this way is identified with an UUID as an argument to
wps-nfc.py.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-24 10:56:29 +02:00
Jouni Malinen
c39fdb8529 WPS: Add wps-er-config command for writing config token from ER
UUID of the AP is specified on the command line to select which
configuration is used.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-24 10:54:18 +02:00
Jouni Malinen
b618a469c4 Interworking: Select highest priority cred if multiple matches
Previously, the credential to use for a connection with a specific BSS
was picked arbitrary based on first found match of each matching
mechanism. While the credential priorities were used elsewhere, this did
not take into account that different mechanisms could find multiple
matching credentials. As such, the highest priority credential was not
always used in case more than one credential matched with the selected
BSS. Fix this by checking credential priorities again during connection
request.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-16 19:57:35 +02:00
Jouni Malinen
87470ea298 WPS: Fix build without CONFIG_WPS_NFC
Commit bbf41865c9 added calls to functions
that are only defined if CONFIG_WPS_NFC=y. Protect those calls properly
to avoid build issues.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-15 17:09:24 +02:00
Jouni Malinen
5ab9a6a53e WPS: Add support for NFC handover select generation with wpa_supplicant
When wpa_supplicant is controlling an AP mode interface, it can generate
the alternative carrier record for NFC connection handover select
message similarly to the way this is done in hostapd.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-15 12:34:55 +02:00
Jouni Malinen
7bfe27778b WPS: Update NFC connection handover documentation
The last couple of changes to the control interface commands for NFC
connection handover had not yet been documented.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-15 11:51:28 +02:00
Jouni Malinen
bbf41865c9 WPS: Add support for config token generation with wpa_supplicant
When wpa_supplicant is controlling an AP mode interface, it can generate
the NFC configuration token similarly to the way this is done in
hostapd.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-15 11:47:52 +02:00
Jouni Malinen
23ffcaf172 WPS: Allow password token to be written with nfcpy
This adds write-password option for the nfcpy example script for
wpa_supplicant to match hostapd wps-ap-nfc.py functionality.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-15 11:34:13 +02:00
Jouni Malinen
042ec551d4 WPS: Use pre-configured NFC password token instead of overriding it
"WPS_NFC_TOKEN <WPS/NDEF>" used to generate a new NFC password token
regardless of whether there was a pre-configured token in the
configuration. Change this to use the pre-configured value, if
available, instead. This allows the same command to be used to write the
password token to an NFC tag more conveniently.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-15 11:24:29 +02:00
Sunil Dutt
d16531c40c TDLS: Pass peer's Capability and Ext Capability info during sta_add
The contents of the peer's capability and extended capability
information is required for the driver to perform TDLS P-UAPSD and Off
Channel operations. Pass this information to the driver when the peer
station is getting added.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-14 21:02:34 +02:00
Sunil Dutt
189206dddb Android: Enable TDLS support in the build
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-14 21:01:54 +02:00
Sunil Dutt
ff4178d57c TDLS: Pass peer's HT Capability and QOS information during sta_add
The information of the peer's HT capability and the QOS information is
required for the driver to perform TDLS operations. Pass this
information to the driver when the peer station is getting added.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-14 21:01:50 +02:00
Jouni Malinen
b8df43dec6 TDLS: Fix add/set STA operation
Commit a9a1d0f08a added vht_capabilities
to struct hostapd_sta_add_params but forgot to update
wpa_supplicant_tdls_peer_addset() to initialize the variable to NULL.
This could result in uninitialized pointer being used in
driver_nl80211.c when adding a TDLS peer entry. Fix this by clearing the
hostapd_sta_add_params with memset.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-14 21:01:07 +02:00
Sunil Dutt
7b44ff2c21 TDLS: Tear down peers when disconnecting from the AP
A TDLS Teardown frame with Reason Code 3 (Deauthenticated because
sending STA is leaving (or has left) IBSS or ESS) shall be transmitted
to all TDLS peer STAs (via the AP or via the direct path) prior to
transmitting a Disassociation frame or a Deauthentication frame to the
AP.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-13 01:19:44 +02:00
Jouni Malinen
c5f10e804a Use more accurate timestamps for scan results
For various P2P use cases, it is useful to have more accurate timestamp
for the peer information update. This commit improves scan result
handling by using a single timestamp that is taken immediately after
fetching the results from the driver and then using that value to
calculate the time when the driver last updated the BSS entry. In
addition, more debug information is added for P2P peer updates to be
able to clearly see how old information is being used here.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-12 19:14:32 +02:00
Jouni Malinen
e47588279a WPS: Report NFC connection handover completion differently
Instead of reporting only one connection handover message, report
completion of NFC connection handover with carrier record from both the
request and select messages.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-11 18:43:46 +02:00
Jouni Malinen
ec01d5f6b0 P2P: Avoid concurrent scans during all steps of group formation
Previously, only some P2P states were considered to postpone concurrent
station mode scans during group formation. Especially the WPS
provisioning step was skipped due to issues to scans run on the P2P
client interface (see commit fc6997b345).
This is not ideal since a concurrent scan can slow down group formation
considerably and potentially make it time out. Enforce p2p-in-progress
through all steps of group formation on another interface to address
this.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-11 12:21:03 +02:00
Jouni Malinen
77dfafd07d P2P: Cancel group formation timeout on group removal (on client)
Group formation timeout is normally canceled when 4-way handshake is
completed (WPA_COMPLETED -> wpas_p2p_completed). However, it is possible
for the GO to stop the group before this happens (i.e., send
Deauthentication frame with reason code 3 before 4-way handshake is
completed). This resulted in the group getting removed, but the group
formation timeout left behind. The unexpected timeout may then result in
undesired termination of the following operation. Fix this by canceling
the group formation timeout in wpas_p2p_group_delete() similarly to how
group idle timeout was canceled there.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-10 23:36:52 +02:00
Jouni Malinen
bd692a8b0e WPS: Change listen time to match nfcpy default (250 ms)
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-02-10 18:49:20 +02:00
Jouni Malinen
b8dbc5d689 WPS: Report only the carrier record from NFC to wpa_supplicant
Since there could be multiple carrier records, it is cleaner to report
only the WPS carrier record instead of full NFC connection handover
select to wpa_supplicant.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-02-10 18:42:43 +02:00
Jouni Malinen
bbaaaee171 WPS: Fetch only the carrier record from wpa_supplicant for NFC
Since there could be multiple carrier records, it is cleaner to build
only the WPS carrier record instead of full NFC connection handover
request within wpa_supplicant.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-02-10 18:19:59 +02:00
Jouni Malinen
cf78e2acc8 WPS: Clean up debug prints with nfcpy
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-02-10 16:27:59 +02:00
Jouni Malinen
8414860422 WPS: Remove 0.5 sec extra wait from NFC handover with nfcpy
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-02-10 16:27:14 +02:00
Jouni Malinen
dc6bda1123 WPS: Use alternating poll/listen for NFC peer discovery with nfcpy
This is needed to find the NFC peer to avoid cases where both devices
could be using the same operation.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-02-10 16:25:20 +02:00
Jouni Malinen
8140ae969b WPS: Configure logging to show nfcpy log message
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-02-10 16:20:25 +02:00
Peter Wu
a24a5ccb28 dbus: Add missing signal description for WPS (7)
Commit caff399250 added a property named
"WPS" to the dbus interface. It did not add the new
WPAS_DBUS_BSS_PROP_WPS property to the function responsible for marking
changed properties though. This cause the following messages to be
printed repeatedly to syslog:

    dbus: wpas_dbus_bss_signal_prop_changed: Unknown Property value 7

Signed-hostap: Peter Wu <lekensteyn@gmail.com>
2013-02-09 12:13:54 +02:00
Jouni Malinen
62cab3b737 eap_proxy: Add a dummy implementation for compilation testing
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-08 11:54:05 +02:00
Deepthi Gowri
bd3ca9d0bf Android: Enable EAP-AKA support in the build
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-08 11:54:03 +02:00
Deepthi Gowri
45f4a97a3a eap_proxy: Add mechanism for allowing EAP methods to be offloaded
In addition to the offload mechanism, the Android configuration and
makefiles are extended to allow this to be configured for the build by
dropping in platform specific configuration files and makefile without
having to modify any existing files.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-08 11:54:01 +02:00
Dmitry Shmidt
66fe0f703c Add 'SCAN TYPE=ONLY' functionality
Usual manual scan request may cause reassociation due to several
reasons. New command is intended to perform pure scan without taking any
automatic action based on the results.

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2013-02-07 18:09:50 +02:00
Vladimir Kondratiev
ff3ad3c531 Capability matching for 60 GHz band
On the DMG (60 GHz) band, capability bits defined differently from
non-DMG ones. Adjust capability matching to cover both cases.

Also, for non-DMG bands, check ESS bit is set.

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
2013-02-07 16:20:18 +02:00
Raja Mani
3140803b6d nl80211: Add ctrl_iface message for AP mode connection rejection
When AP mode operation reject the client, nl80211 layer advertises the
connect failed event with the reason for failures (for example, max
client reached, etc.) using NL80211_CMD_CONN_FAILED.

This patch adds some debug messages whenever such an event is received
from the nl80211 layer and also the same event is posted to the upper
layer via wpa_msg().

Signed-off-by: Raja Mani <rmani@qca.qualcomm.com>
2013-02-07 15:24:53 +02:00
Jouni Malinen
409ca9a84d P2P: Allow local configuration to use 5 GHz band 40 MHz channels
These channels were already enabled for P2P use, but the local
configuration parameter was not allowed to use the operating class in
which the 40 MHz channels are specified.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-07 12:51:17 +02:00
Amar Singhal
9f42d49c55 Fix BSS RANGE command for no exact id match cases
The RANGE=N1-N2 command did not return any entries in some cases where
N1 does not match with any BSS entry. Fix this by allow entries to be
fetched even without knowing the exact id values.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-07 12:27:52 +02:00
Amar Singhal
cc03d0fef3 Add "BSS LAST ..." command
Add the "BSS LAST ..." command. This command helps in fetching the scan
entries iteratively from FIRST entry to LAST entry by ID.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-06 00:31:34 +02:00
Amar Singhal
f330b4b44b Fix the "BSS FIRST.." command
The "BSS FIRST.." command fails when additional parameters (e.g., MASK)
is used since the string comparsion does not take into account the
number of characters. Fix by comparing only 5 characters as in other
commands.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-06 00:28:48 +02:00
Jouni Malinen
5ebe8c8179 HS 2.0: Fix IE buffer length for extra scan IEs
The HS 2.0 Indication element is 7 (not 6) octets. The previous
implementation could result in wpabuf validation code stopping the
program if HS 2.0 was enabled without Interworking or P2P (which would
have created a large enough buffer to avoid hitting this) being enable.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-05 17:40:09 +02:00
Sunil Dutt
3887878e53 TDLS: Remove link, if any, on an implicit set up request
If an implicit TDLS set up request is obtained on an existing link or an
to be established link, the previous link was not removed. This commit
disables the existing link on a new set up request. Also,
wpa_tdls_reneg() function was invoking wpa_tdls_start() on an already
existing peer for the case of internal setup, which is incorrect. Thus
the invocation of wpa_tdls_start() is removed in wpa_tdls_reneg() and
also this function is renamed to wps_tdls_remove() as it does not
renegotiation rather shall remove the link (if any) for the case of
external setup.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-05 13:27:56 +02:00
Jouni Malinen
2b79164f12 P2P: Fix P2P-GROUP-STARTED event for p2p_connect-join
Commit 50178335bf introduced a regression
for P2P-GROUP-STARTED event indication during p2p_connect-join when
using a separate P2P group interface. wpa_s->global->p2p_group_formation
was already set in that case to point to the group interface and this
commit changed this to point to incorrect interface. Fix this by setting
p2p_group_formation here only in case a separate group interface is not
used.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-04 15:52:53 +02:00
Jaewan Kim
391f492532 wpa_supplicant: Fix access to the freed memory when removing all networks
Commit 59ff6653aa fixed this issue for
'removing a network', and we also need to take care of 'removing all
networks'.

Signed-hostap: Jaewan Kim <jaewan at google.com>
2013-02-03 21:22:59 +02:00
Jouni Malinen
d6bbcce411 Make wpas_select_network_from_last_scan() static
Addition of wpa_supplicant_fast_associate() made it unnecessary to call
wpas_select_network_from_last_scan() directly from other files.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-02-03 21:13:07 +02:00
Paul Stewart
cecdddc184 wpa_supplicant: Implement fast-associate on SelectNetwork
If scan results are available when we perform a SelectNetwork, use
them to make an associate decision.  This can save an entire scan
interval-worth of time in situations where something external to
wpa_supplicant (like a connection manager) has just previously
requested a scan before calling SelectNetwork.

Signed-hostap: Paul Stewart <pstew@chromium.org>
2013-02-03 21:08:31 +02:00
Pontus Fuchs
9e737f08d4 Update scan interval gracefully
When the scan interval is changed the new interval is effective
after the old interval timer fires off one last time. This can cause
an unacceptable long delay when updating the interval.

Change this behaviour to use MIN(left of old interval, new interval)
for the scan interval following the interval change.

Signed-hostap: Pontus Fuchs <pontus.fuchs@gmail.com>
2013-02-03 18:14:05 +02:00
Sunil Dutt
f2e698de7e TDLS: Disable the link also on driver request for teardown
The link was not disabled for the case of implicit trigger from the
driver unlike in the case of explicit trigger fromc ctrl_iface. Make the
tear down sequences match in these cases by adding the TDLS_DISABLE_LINK
tdls_oper to the driver when processing the TDLS_REQUEST_TEARDOWN event.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-01-22 14:09:54 +02:00
Jouni Malinen
dc013f1e37 eapol_test: Remove unnecessary header file inclusion
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-01-15 12:03:29 +02:00
Jouni Malinen
90d215b264 Fix wpa_priv build
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-01-13 19:06:53 +02:00
Jouni Malinen
a13e1cc345 Fix EAP-pwd server file name for wpa_supplicant AP builds
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-01-13 19:06:53 +02:00
Jouni Malinen
2ee1594da9 Updated test_wpa to use new header file for WPA authenticator
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-01-13 19:06:53 +02:00
Jouni Malinen
62769a88db Move cipher to enum wpa_cipher conversion into wpa_common.c
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-01-13 18:02:20 +02:00
Jouni Malinen
cf830c1c54 Use a helper function for selection group cipher for AP mode
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-01-13 17:41:40 +02:00
Jouni Malinen
0282a8c46a Use helper function for writing cipher suite names
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-01-13 17:31:36 +02:00
Jouni Malinen
031453265f Define allowed pairwise/group cipher suites in a header file
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-01-13 17:10:38 +02:00
Jouni Malinen
a39c78be41 Use a common function for parsing cipher suites
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-01-13 17:06:22 +02:00
Jouni Malinen
edbd2a191e Move cipher suite selection into common helper functions
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-01-13 16:58:54 +02:00
Jouni Malinen
9aadb8774e P2P: Add some more details on Service Query TLV format
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-01-13 13:43:54 +02:00
Paul Stewart
93c7e332c2 wpa_supplicant: Add more DBus EAP status
Signal the start of EAP authentication as well as when additional
credentials are required to complete.

Signed-hostap: Paul Stewart <pstew@chromium.org>
2013-01-12 19:51:18 +02:00
Jouni Malinen
67bc1375eb Update ChangeLog files to match current implementation
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-01-12 18:04:19 +02:00
Jouni Malinen
b4fd3613d3 SAE: Free temporary buffers when moving to Accepted state
Most of the variables are not needed anymore once the SAE instance
has entered Accepted state. Free these to save memory.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-01-12 17:51:54 +02:00
Jouni Malinen
4ef34a9960 SAE: Remove duplicated SAE field debug dumps
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-01-12 17:51:54 +02:00
Jouni Malinen
fbfb0e65bf SAE: Add support for FFC groups
This allows FFC groups to be used with SAE. Though, these groups are not
included in the default sae_groups value based on what is available
since the FFC groups have the additional requirement of using a safe
prime with the current implementation (or specification of the group
order).

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-01-12 17:51:54 +02:00
Jouni Malinen
cbf61176ed Add more debug info if wpa_supplicant_set_suites() fails
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-01-12 17:51:53 +02:00
Jouni Malinen
9c75e9fb81 WPS: Verify wpa_config_set() return value more consistently
Even though this command is very unlikely to fail, in theory, it could
and the WPS connection would fail in such a case. Return more clearer
failure indication in such a case without even trying to start
reassociation.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-01-12 17:51:53 +02:00
Jouni Malinen
4954c859ea SAE: Indicate used group in ctrl_iface STATUS
The new "sae_group=<id>" line will be included in the ctrl_iface STATUS
output if SAE was used for the association.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-01-12 17:51:53 +02:00
Jouni Malinen
625f202a74 SAE: Allow enabled groups to be configured
hostapd.conf sae_groups parameter can now be used to limit the set of
groups that the AP allows for SAE. Similarly, sae_groups parameter is
wpa_supplicant.conf can be used to set the preferred order of groups. By
default, all implemented groups are enabled.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-01-12 17:51:53 +02:00
Jouni Malinen
e056f93e60 Update copyright notices to include year 2013
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-01-12 17:51:53 +02:00
Jouni Malinen
a46d72d7d7 SAE: Maintain EC group context in struct sae_data
This can be used to share same EC group context through the SAE
exchange.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-01-12 17:51:52 +02:00