Commit graph

2526 commits

Author SHA1 Message Date
Jouni Malinen
dd8f02349b tests: Enable SO_REUSEADDR for FILS HLP testing sockets
This is needed to avoid "Address already in use" issues in some test
sequences.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-16 20:59:06 +02:00
Jouni Malinen
ee4b99e741 tests: WNM BSS Transition Management with RSN
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-16 13:33:45 +02:00
Jouni Malinen
6ed2498eb5 tests: P2P channel selection with driver frequency preference list
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-16 12:41:22 +02:00
Jouni Malinen
1123bd4834 tests: wpa_supplicant get_pref_freq_list_override
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-16 12:08:22 +02:00
Jouni Malinen
a04e6f3da2 tests: WPA2-PSK-FT AP over DS protocol testing for AP processing
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-15 11:17:37 +02:00
Jouni Malinen
682a79f088 tests: WPA2-PSK-FT and AP OOM
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-15 10:35:44 +02:00
Jouni Malinen
88bf9c2354 tests: FILS SK HLP and DHCP response parsing
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-13 23:17:31 +02:00
Jouni Malinen
279ff5ab69 tests: FILS SK HLP request parsing
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-13 23:17:31 +02:00
Jouni Malinen
ea30e82dde tests: FILS SK HLP and hostapd OOM
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-13 23:17:31 +02:00
Jouni Malinen
3d5bb90090 tests: FILS SK HLP (rapid commit server timeout)
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-13 10:58:21 +02:00
Jouni Malinen
dc15e92b46 tests: WNM Disassociation Imminent failure cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2017-02-12 18:15:37 +02:00
Jouni Malinen
5cf0930f9c testS: Additional BSS TM error case coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
2017-02-12 18:10:25 +02:00
Jouni Malinen
5cf2f7b3db tests: WNM BSS TM - protocol testing for AP message parsing
Signed-off-by: Jouni Malinen <j@w1.fi>
2017-02-12 18:06:02 +02:00
Jouni Malinen
554a59bc6d tests: WNM Sleep Mode - open (fail)
Signed-off-by: Jouni Malinen <j@w1.fi>
2017-02-12 17:52:20 +02:00
Jouni Malinen
0c52ad116d tests: WNM BSS Transition Management OOM
Signed-off-by: Jouni Malinen <j@w1.fi>
2017-02-12 17:47:58 +02:00
Jouni Malinen
5fcc8c5cdf tests: WNM Sleep Mode - protocol testing
Signed-off-by: Jouni Malinen <j@w1.fi>
2017-02-12 17:44:56 +02:00
Jouni Malinen
ea8d18a061 tests: RSN AP deinit during PeerKey negotiation
Signed-off-by: Jouni Malinen <j@w1.fi>
2017-02-12 11:18:03 +02:00
Jouni Malinen
f603c320d3 tests: Additional WMM AP parsing coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
2017-02-11 12:12:41 +02:00
Jouni Malinen
065c3cb8d1 tests: wpa_supplicant SET relative RSSI
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-10 19:48:12 +02:00
Jouni Malinen
8a303f09a2 tests: EAP-AKA within EAP-TTLS/PEAP/FAST tunnel and reauth
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-10 19:48:12 +02:00
Jouni Malinen
f22bc11846 tests: EAP-SIM tunneled within EAP-TTLS/PEAP/FAST
This verifies both the internal and external GSM authentication
operation when EAP-SIM is tunneled within EAP-TTLS/PEAP/FAST.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-10 19:48:12 +02:00
Jouni Malinen
c299dea558 tests: WPA-PSK/TKIP countermeasures (detected by two STAs)
This includes check for hostapd ending TKIP countermeasures.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-10 19:48:12 +02:00
Jouni Malinen
6dbfefb9b4 tests: Additional RRM testing coverage for hostapd
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-10 19:48:12 +02:00
Jouni Malinen
360440db2d tests: More WPA2 PSK from RADIUS Tunnel-Password coverage
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-08 23:48:20 +02:00
Jouni Malinen
77376f3057 tests: RADIUS MAC ACL and server unreachable
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-08 23:48:20 +02:00
Jouni Malinen
b3f32a24d4 tests: RADIUS MAC ACL and OOM
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-08 23:48:19 +02:00
Jouni Malinen
7745728ee8 tests: RADIUS Accounting in RSN and failure to add attributes due to OOM
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-08 23:48:19 +02:00
Jouni Malinen
6f9b4de228 tests: Make ap_wps_er_http_proto less likely to fail
The test step for concurrent HTTP connections seems to be failing quite
frequently when running in a virtual machine with run-tests.py (but not
that much with kvm and vm-run.sh). The failures are due to only 8 or 9
sockets getting a response from the HTTP server. This is sufficient for
testing purposes, to drop the pass criterium from 10 to 8 concurrent
connections. This avoids unnecessary test failures and also allows the
rest of the test case to be performed.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-08 13:53:11 +02:00
Jouni Malinen
02538b39b4 tests: Check for ebtables having been installed
This makes proxyarp_open_ebtables and proxyarp_open_ebtables_ipv6 return
SKIP cleanly if the ebtables binary is not installed or does not work.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-08 13:35:36 +02:00
Jouni Malinen
b8564c9db0 tests: Make radius_acct_interim more robust
Wait one more second to make the test case less likely to fail while
still being able to verify that interim updates are performed.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-07 23:58:55 +02:00
Jouni Malinen
0fcaff7a70 tests: Clear country code at the end of wpas_config_file
This test case was mistakenly leaving the country code FI configured at
the end which could result in issues with the following test cases. Fix
this by explicitly clearing the country code back to world roaming 00 at
the end of wpas_config_file.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-07 23:03:35 +02:00
Vamsi Krishna
16f91791da tests: Verify GAS/ANQP transmitter address randomization
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-07 19:54:58 +02:00
Jouni Malinen
008aa15abc tests: Additional GAS server coverage
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-07 17:47:58 +02:00
Jouni Malinen
1722a46b62 tests: wpa_supplicant AP mode - 5 GHz
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-07 11:23:41 +02:00
Jouni Malinen
62e0e57a98 tests: Make go_search_non_social more robust
Try the initial scan on the operating channel twice before claiming a
test failure. It is possible for an active scan to fail to see the GO
especially if running the test under heavy load.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-07 11:08:24 +02:00
Jouni Malinen
ac723b35bb tests: WPA2-PSK EAPOL-Key retry limit configuration
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-07 00:25:36 +02:00
Jouni Malinen
f366ff24f5 tests: VHT and 40 MHz channel configuration falling back to 20 MHz
Signed-off-by: Jouni Malinen <j@w1.fi>
2017-02-06 19:26:07 +02:00
Jouni Malinen
eb04c3bf8a tests: RADIUS Accounting local failure cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2017-02-05 17:19:44 +02:00
Jouni Malinen
95497a5fc1 tests: BSS Load update failing to get survey data
Signed-off-by: Jouni Malinen <j@w1.fi>
2017-02-05 16:52:38 +02:00
Jouni Malinen
7e6cc3288c tests: Update mesh_oom to match the wpa_supplicant_mesh_init() change
There is now one fewer direct allocation call in this function, so the
counters need to be updated to avoid test failures.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-02-04 22:46:06 +02:00
Jouni Malinen
eeea363cab tests: FILS HLP request with DHCPDISCOVER
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-01 18:17:39 +02:00
Jouni Malinen
0d7b2e9018 tests: GAS long comeback delay over default STA timeout
This verifies that the temporary STA entry timeout limit does not end up
breaking comeback_delay tests with values larger than five seconds.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-01-30 13:25:48 +02:00
Jouni Malinen
955c6641aa tests: Skip hapd_ctrl_test_fail if TEST_* commands not included in build
This test case was triggering false failures with hostapd build that did
not include TEST_* commands.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-01-30 12:01:04 +02:00
Jouni Malinen
92607e91fb tests: wpa_supplicant AP mode - STA commands on global control interface
Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-30 01:54:30 +02:00
Jouni Malinen
e91877fb62 tests: Mesh and HT40 support difference
Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-29 18:31:54 +02:00
Jouni Malinen
5edd051961 tests: wpa_supplicant mesh with dynamic interface and removal
This is a regression test case for SIGSEGV in
wpa_supplicant_remove_iface() if the main interface is removed while a
separate mesh interface is in use.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-29 17:42:02 +02:00
Jouni Malinen
3ca712028d tests: Remove mesh before trying to clear BSS cache
The flush_scan_cache() operations in the finally part of these test
cases ended up getting called when the mesh group was still operating.
This could result in unexpected behavior due to offchannel scan being
performed before the device becomes idle. Clean this up by explicitly
removing the mesh group before cleaning up.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-29 16:27:07 +02:00
Jouni Malinen
8b19401679 tests: Comment out CONFIG_DEBUG_KOBJECT_RELEASE from default config
This kernel debugging option adds multiple seconds of extra latency to
interface removal operations. While this can be worked around by
increasing timeouts in number of test cases, there does not seem to be
any clean way of working around this for PMKSA cacheching test with
per-STA VIFs (e.g., pmksa_cache_preauth_vlan_used_per_sta_vif).

To avoid unnecessary test failures, remove CONFIG_DEBUG_KOBJECT_RELEASE
from the default config. If someone wants to test with this kernel debug
option, it can be enabled for custom kernel builds while understanding
that it can result in false failure reports and significantly extended
time needed to complete full testing run.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-29 16:06:44 +02:00
Jouni Malinen
97ad4d2071 tests: Increase timeout in ap_vlan_iface_cleanup_multibss*
If the kernel is built with CONFIG_DEBUG_KOBJECT_RELEASE=y, the cleanup
steps were taking so long that these test cases could fail.

Fix this by increasing the timeout to avoid reporting failures.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-29 14:42:05 +02:00
Jouni Malinen
086d3cc2dc tests: FILS SK using ERP and roam to another SSID
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-01-29 14:32:17 +02:00