Commit graph

42 commits

Author SHA1 Message Date
Jouni Malinen
de61795e7c TDLS: Use merge_byte_arrays() helper
This makes implementation simpler and easier for static analyzers to
understand.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-01-12 17:51:53 +02:00
Subrat Dash
0e28de0d2b TDLS: Add support for TDLS frame RX with bridge interfaces
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-03-30 11:12:33 +03:00
Jouni Malinen
e22d4d957b Remove the GPL notification from files contributed by Atheros
Remove the GPL notification text from files that were initially
contributed by Atheros Communications or Qualcomm Atheros.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-02-11 19:39:36 +02:00
Jouni Malinen
08f6ab76a5 TDLS: Do not clear peer data too early for teardown
TPK will be needed to be able to generate FTIE MIC for the
teardown message, so maintain peer data for a bit longer in
case the teardown FTIE request comes back from the driver.
2011-10-27 23:15:46 +03:00
Jouni Malinen
c581201493 TDLS: Disable link on various error cases
This is needed to be able to return back to AP path on error cases.
2011-10-27 23:13:54 +03:00
Jouni Malinen
db9af0da70 TDLS: Disable previous link to fix renegotiation 2011-10-27 23:13:14 +03:00
Jouni Malinen
da30c93ab1 TDLS: Fix concurrent initialization test code
Must not use data from peer TDLS Setup Request if the concurrent
initialization from us is supposed to be the one that gets completed.
2011-10-27 23:12:08 +03:00
Jouni Malinen
ca03378b27 TDLS: Fix teardown on renegotiation
Need to disable the link when receiving TDLS Setup Request from a
peer with which a direct link has already been set up.
2011-10-27 23:10:21 +03:00
Jouni Malinen
5c1c940f1d TDLS: Fix long frame test for teardown 2011-10-27 23:09:23 +03:00
Arik Nemtsov
ccc12d7841 TDLS: Make use of wpa_tdls_add_peer to avoid code duplication
Use the wpa_tdls_add_peer function to allocate TDLS peer structures.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Cc: Kalyan C Gaddam <chakkal@iit.edu>
2011-10-23 22:20:58 +03:00
Arik Nemtsov
2d565a61f2 TDLS: Support mgmt-frame Tx for ctrl-iface operations
Use capability information to decide whether to perform a given TDLS
operation internally or through mgmt-frame Tx.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Cc: Kalyan C Gaddam <chakkal@iit.edu>
2011-10-23 22:20:43 +03:00
Arik Nemtsov
45b722f150 TDLS: Add peer as a STA during link setup
Before commencing setup, add a new STA entry to the driver representing
the peer. Later during setup, update the STA entry using information
received from the peer.

Extend sta_add() callback for adding/modifying a TDLS peer entry and
connect it to the TDLS state machine. Implement this callback for the
nl80211 driver and send peer information to kernel.

Mark TDLS peer entries with a new flag and translate it to a
corresponding nl80211 flag in the nl80211 driver.

In addition, correct TDLS related documentation in the wpa_driver_ops
structure.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Cc: Kalyan C Gaddam <chakkal@iit.edu>
2011-10-23 22:19:35 +03:00
Arik Nemtsov
979bcccf64 TDLS: Collect peer capabilities and supp-rates during link setup
Record the capabilities and supported rates of the TDLS peer during
link setup. These are given in the IEs passed in Setup Request and
Setup Response frames.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Cc: Kalyan C Gaddam <chakkal@iit.edu>
2011-10-23 22:19:13 +03:00
Arik Nemtsov
8f15f711c5 TDLS: Implement low-ack event for lost TDLS peers
Disable the direct connection when a TDLS peer stops responding
to packets, as indicated by the "LOW ACK" event coming from a driver.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Cc: Kalyan C Gaddam <chakkal@iit.edu>
2011-10-23 22:19:08 +03:00
Arik Nemtsov
7a1486cd31 TDLS: Support sending TDLS discovery requests
Allow sending a TDLS discovery request as a frame through the driver.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Cc: Kalyan C Gaddam <chakkal@iit.edu>
2011-10-23 22:19:05 +03:00
Arik Nemtsov
7de27409a2 TDLS: Support sending a teardown frame from usermode
When a driver does not implement the TDLS_TEARDOWN operation internally,
send an explicit TDLS link teardown frame to the driver.

Change all teardown calls to use these calling semantics.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Cc: Kalyan C Gaddam <chakkal@iit.edu>
2011-10-23 22:18:49 +03:00
Arik Nemtsov
4d0d6b37f9 TDLS: Process discovery requests and send discovery responses
When a discovery request is received, add the peer to the TDLS peer
cache and send a response containing minimal data. Mandatory IEs in
the discovery response frame will be filled out by the driver.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Cc: Kalyan C Gaddam <chakkal@iit.edu>
2011-10-23 22:18:27 +03:00
Arik Nemtsov
c58ab8f249 TDLS: Get TDLS related capabilities from driver
Put glue code in place to propagate TDLS related driver capabilities to
the TDLS state machine.

If the driver doesn't support capabilities, assume TDLS is supported
internally.

When TDLS is explicitly not supported, disable all user facing TDLS
operations.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Cc: Kalyan C Gaddam <chakkal@iit.edu>
2011-10-23 22:15:15 +03:00
Arik Nemtsov
568526f1ea TDLS: Use a valid dialog-token in a setup request
A zero dialog-token is considered invalid by IEEE Std 802.11z-2010.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Cc: Kalyan C Gaddam <chakkal@iit.edu>
2011-10-23 22:14:42 +03:00
Jouni Malinen
a04bf77209 TDLS: Validate FTIE length before processing it
This avoids reading past the end of the IE buffer should the FTIE
be too short. In addition, one debug hexdump was using uninitialized
pointer to the FTIE buffer, so fixed it to use the pointer from the
parse data.
2011-04-13 22:14:22 +03:00
Jouni Malinen
d332e7083c TDLS: Disable teardown MIC validation workaround
This MIC is required to be correct if the keys are set, so reject
the message if it does not have a valid MIC.
2011-04-07 14:48:46 +03:00
Jouni Malinen
b8f64582e3 TDLS: Allow TDLS to be disabled at runtime for testing purposes
Control interface command 'SET tdls_disabled <1/0>' can now be used
to disable/enable TDLS at runtime. This is mainly for testing
purposes.
2011-03-24 20:44:17 +02:00
Jouni Malinen
b8fb017272 TDLS: Add tdls_testing 0x400 for ignoring AP prohibit TDLS 2011-03-06 14:54:52 +02:00
Jouni Malinen
52c9e6f3f5 TDLS: Do not allow setup to be started if AP prohibits TDLS 2011-03-06 14:54:49 +02:00
Jouni Malinen
fb12d186b6 TDLS: Add tdls_testing 0x200 for declining TDLS Setup Response 2011-03-06 14:54:47 +02:00
Jouni Malinen
94377fbc52 TDLS: Allow wpa_cli tdls_setup to start renegotiation
If there is already a link the requested peer, request start of
renegotiation instead of completely new link. This seems to be needed
to allow some driver to accept the trigger for a new negotiation.
2011-03-06 14:54:44 +02:00
Jouni Malinen
ad79dba127 TDLS: Add testing mode for disabling TPK expiration
tdls_testing 0x104 can now be used to disable expiration of TPK
(0x100) and to use a short lifetime when initiating link (0x4).
2011-03-06 14:54:41 +02:00
Jouni Malinen
0c4268eb27 TDLS: Add testing code for concurrent initiation
tdls_testing 0x80 can now be used to request wpa_supplicant to send
a TDLS Setup Request frame (i.e., try to initiate TDLS setup)
whenever a TDLS Setup Request frame has been received from a peer.
2011-03-06 14:54:39 +02:00
Jouni Malinen
43291b683c TDLS: Fix higher/lower MAC address check for concurrent init
The logic here was reversed: the STA with lower MAC address is the
one that continues as the initiator.
2011-03-06 14:54:36 +02:00
Jouni Malinen
a8b2c2d657 TDLS: Tear down old link when receiving TDLS Setup Request 2011-03-06 14:54:34 +02:00
Jouni Malinen
2a469a6b56 TDLS: Add tdls_testing flag (bit 6) for testing long TPK lifetime 2011-03-06 14:54:32 +02:00
Jouni Malinen
1c0b2ad1ce TDLS: Use more thorough validation of TPK handshake 2011-03-06 14:54:29 +02:00
Jouni Malinen
f0bfbe2a6c TDLS: Replace os_memset() of all peer data with safer approach
Blindly clearing all struct wpa_tdls_peer members is a risky
operation since it could easily clear pointers to allocated
memory, etc. information that really should not be removed.
Instead of hoping that new code gets added here to restore
the important variables, reverse the approach and only clear
structure members one by one when needed.
2011-03-06 14:54:27 +02:00
Jouni Malinen
c61f3e5544 TDLS: Remove unnecessary storing of Link ID IE in peer data 2011-03-06 14:54:24 +02:00
Jouni Malinen
3f466ec9e3 TDLS: Fix terminology to match with IEEE 802.11z 2011-03-06 14:54:22 +02:00
Jouni Malinen
a4c3e4b194 TDLS: Move TPK M1 sending to a separate function
Now all there TPK handshake messages are sent in similar functions
and are easier to find from the source code.
2011-03-06 14:54:20 +02:00
Jouni Malinen
2e1d335e44 TDLS: Allow unencrypted network negotiation through wpa_supplicant
This allows the same code path to be used for both protected and
unprotected configurations to limit need for duplicated code in
both the driver and wpa_supplicant.
2011-03-06 14:54:18 +02:00
Jouni Malinen
9fe6e4b4db TDLS: Clean up and fix Key Lifetime processing
This adds code for validating that the same Key Lifetime is used
throughout TPK handshake and enables TPK lifetime expiration and
renewal/teardown. These part seem to be working, but the actual
handling of TDLS Setup Confirm and renewal are not fully
functional yet.
2011-03-06 14:54:16 +02:00
Jouni Malinen
6b192bc346 TDLS: Add new testing modes for TPK lifetime testing
tdls_testing bits:
bit 3 = use short TPK lifetime (301 seconds)
bit 4 = use wrong TPK lifetime in TDLS Setup Response
bit 5 = use wrong TPK lifetime in TDLS Setup Confirm
2011-03-06 14:54:01 +02:00
Jouni Malinen
40cf22e6ff TDLS: Clear peer entries on association/disassociation
Since the TDLS links are allowed only to STAs that are in the same
BSS with us, clear all peer data whenever the BSS may have changed.
2011-03-06 14:53:58 +02:00
Jouni Malinen
5b0e6ece54 TDLS: Add a special testing feature for changing TDLS behavior
These special test cases can be configured at run time with "wpa_cli
tdls_testing <value>" where <value> is an integer (either as a decimal
or as a hex value with 0x prefix) bitmap of special features with
following bits available at this point:
bit 0 = long frame (add dummy subelement to make FTIE very long)
bit 1 = use alternative RSN IE (different RSN capab value and no extra
replay counters)
bit 2 = send incorrect BSSID in Link Identifier of TDLS Setup Request
(e.g., 1 = long FTIE, 2 = different RSN IE, 3 = both of those)

This is disabled by default and can be enabled for the build by
adding the following line to .config:
CFLAGS += -DCONFIG_TDLS_TESTING
2011-03-06 14:53:54 +02:00
Ganesh Prasadh
281ff0aa76 TDLS: Add initial support for TDLS (IEEE Std 802.11z-2010) 2011-03-06 14:53:49 +02:00