Commit graph

495 commits

Author SHA1 Message Date
Jean-Michel Bachot
046ef4aa67 P2P: Add option for requested device type in P2P search/scan
With this, p2p_find can be extended to find certain requested device
types.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-03-19 12:57:46 +02:00
Jean-Michel Bachot
6f2c060711 P2P: Keep track of peer WPS vendor extensions
Make the P2P code keep track of WPS vendor extensions received from
peers so they can be exposed via DBus later.

Signed-off-by: Jean-Michel Bachot <jean-michelx.bachot@linux.intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-03-19 12:22:21 +02:00
Jean-Michel Bachot
4028a7fd43 WPS: Add support for adding WPS Vendor Extensions
This adds the ability to add WPS vendor extensions to an AP (or GO).
They will be added to the WSC IE(s) in Beacon and Probe Response frames.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-03-19 12:22:16 +02:00
Jouni Malinen
f3cb52fb90 WPS: Move P2P extension generation for WSC IE in Beacon frames
This cleans up debug log by keeping the WSC IE attributes for Beacon
frames before starting to build the Probe Response frame.
2011-03-19 12:22:09 +02:00
Jouni Malinen
f2b3c6bc9c WPS: Add more debug information to PBC session overlap check 2011-03-17 18:04:56 +02:00
Jouni Malinen
0439b08d3d WPS: Fix active PBC session removal to ignore MAC address
Use only the UUID-E to remove active PBC session(s) at the completion of
successful PBC protocol run. This fixes potential issues with Enrollees
that use multiple MAC addresses and as such, can get multiple entries in
the PBC session list.
2011-03-17 18:03:20 +02:00
Jean-Michel Bachot
e57ae6e19e P2P: Keep track of secondary device types for peers
Signed-off-by: Jean-Michel Bachot <jean-michelx.bachot@linux.intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-03-17 11:45:46 +02:00
Jean-Michel Bachot
a9e86bfb74 WPS: Add secondary device types into Probe Request frames
The secondary device type list is an optional attribute in the WSC IE.

Signed-off-by: Jean-Michel Bachot <jean-michelx.bachot@linux.intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-03-17 11:09:49 +02:00
Chao-Wen Yang
3152ff421e WPS: Indicate PBC session overlap in wps_pbc return value
Use a specific return value, WPS-PBC-OVERLAP, to indicate a reason
for rejecting a wps_pbc command in wpa_supplicant AP mode if the
PBC mode cannot be started due to PBC session overlap having been
detected during monitor time.
2011-03-10 18:59:51 +02:00
Jouni Malinen
3cc002ff97 WPS: Ignore PBC session overlap if a specific Enrollee is selected
This allows the user to complete WPS provisioning using PBC by
selected a specific Enrollee even if there are other Enrollees
in active PBC mode at the same time. The other Enrollees will be
rejected should they try to connect at the same time.
2011-03-10 18:51:00 +02:00
Jouni Malinen
80e75578c4 WPS: Show the received UUID-E from Probe Request in debug log
This makes it easier to debug PBC session overlap issues.
2011-03-10 18:38:16 +02:00
Jouni Malinen
b0dc4155c3 WPS: Use only UUID-E in PBC session overlap detection on Registrar
Ignore possible mismatches in the source address of the frame and only
use UUID-E to check whether a Probe Request or M1 is from the same
Enrollee when figuring out whether there is PBC session overlap. This
is needed to avoid potential issues with Enrollee devices that may have
multiple interfaces indicating active PBC state.
2011-03-10 18:33:53 +02:00
Jouni Malinen
d601247ca9 P2P: Allow WPS_PBC command on GO to select on P2P Device Address
An optional parameter, p2p_dev_addr, can now be given to WPS_PBC
command on P2P GO to indicate that only the P2P device with the
specified P2P Device Address is allowed to connect using PBC. If
any other device tries to use PBC, a session overlap is indicated
and the negotiation is rejected with M2D. The command format for
specifying the address is "WPS_PBC p2p_dev_addr=<address>", e.g.,
WPS_PBC p2p_dev_addr=02:03:04:05:06:07

In addition, show the PBC session overlap indication as a WPS failure
event on an AP/GO interface. This particular new case shows up as
"WPS-FAIL msg=4 config_error=12".
2011-02-07 18:28:36 +02:00
Chao-Wen Yang
c5cf0a18f1 WPS: Add mechanism for indicating non-standard WPS errors
Previously, only the Configuration Error values were indicated in
WPS-FAIL events. Since those values are defined in the specification
it is not feasible to extend them for indicating other errors. Add
a new error indication value that is internal to wpa_supplicant and
hostapd to allow other errors to be indicated.

Use the new mechanism to indicate if negotiation fails because of
WEP or TKIP-only configurations being disallows by WPS 2.0.
2011-01-13 17:50:59 +02:00
Jouni Malinen
d19f5fc881 WPS: Include all Config Methods in Probe Request
Do not use active PBC state to figure out which ConfigMethods are
included in Probe Request; instead, include all supported ones.
2010-12-20 12:54:10 +02:00
Jouni Malinen
3642c4313a Annotate places depending on strong random numbers
This commit adds a new wrapper, random_get_bytes(), that is currently
defined to use os_get_random() as is. The places using
random_get_bytes() depend on the returned value being strong random
number, i.e., something that is infeasible for external device to
figure out. These values are used either directly as a key or as
nonces/challenges that are used as input for key derivation or
authentication.

The remaining direct uses of os_get_random() do not need as strong
random numbers to function correctly.
2010-11-24 01:05:20 +02:00
Jouni Malinen
9dd7d6b09c WPS: Add special AP Setup Locked mode to allow read only ER
ap_setup_locked=2 can now be used to enable a special mode where
WPS ER can learn the current AP settings, but cannot change then.
In other words, the protocol is allowed to continue past M2, but
is stopped at M7 when AP is in this mode. WPS IE does not
advertise AP Setup Locked in this case to avoid interoperability
issues.

In wpa_supplicant, use ap_setup_locked=2 by default. Since the AP PIN
is disabled by default, this does not enable any new functionality
automatically. To allow the read-only ER to go through the protocol,
wps_ap_pin command needs to be used to enable the AP PIN.
2010-11-17 16:48:39 +02:00
Jouni Malinen
bc8714283d WPS: Fix UPnP deinit order to avoid using freed memory
When multiple wireless interfaces are used with WPS, the UPnP
subscriptions need to be removed whenever a matching Registrar
instance gets removed. This avoids a segfault due to access to
freed memory during hostapd shutdown.

In addition, the UPnP interface instance structure needs to be
freed to avoid memory leak.
2010-11-11 16:56:36 +02:00
Jouni Malinen
c17b1e274f WPS ER: Fix compiler warning on non-WPS2 builds 2010-11-11 14:54:18 +02:00
Jouni Malinen
fd806bac5f WPS: Change concurrent radio AP to use only one WPS UPnP instance
WPS external Registrars can get confused about multiple UPnP
instances (one per radio) on a dual-concurrent APs. Simplify the
design by sharing a single UPnP state machine for all wireless
interfaces controlled by hostapd. This matches with the previous
changes that made a single command enable WPS functionality on
all interfaces.

This is relatively minimal change to address the sharing of the
state among multiple struct hostapd_data instances. More cleanup
can be done separately to remove unnecessary copies of information.
2010-11-11 14:50:13 +02:00
Jouni Malinen
22a062815d WPS: Add wildcard AuthorizedMACs entry for PBC 2010-11-09 11:24:06 +02:00
Jouni Malinen
ccb7e5ee59 WPS: Send WSC_NACK if message without Message Type is received 2010-11-04 18:17:00 +02:00
Jouni Malinen
4a64a51b63 WPS: Share common function for building WSC ACK/NACK
These are identical functions in Enrollee and Registrar and there
is no need to maintain two copies of the same functionality.
2010-11-04 18:16:14 +02:00
Jouni Malinen
7b23f0f3c8 WPS: Do not advertise support for WEP in WPS 2.0 build
There is no point in advertising support for WEP or Shared Key
authentication if we are going to reject those anyway based on
WPS 2.0 rules.
2010-11-04 17:37:20 +02:00
Jouni Malinen
c7c0ddfd91 WPS: Remove PushButton from M1 ConfigMethods on AP
These config methods are for the Enrollee role, i.e., for adding
external Registrars, and as such, PushButton should not be claimed
to be supported.
2010-11-04 17:29:48 +02:00
Jouni Malinen
07fef399a1 WPS ER: Clear WPS state if PutMessage does not include NewOutMessage
This is needed to avoid getting stuck with pending WPS operation, e.g.,
when an AP replies to WSC_NACK with HTTP OK, but without following
message.
2010-11-02 11:20:54 +02:00
Jouni Malinen
5245483f80 WPS ER: Add validation of WPS attributes in proxied Probe Request
When strict validation is enabled in the build, check the WPS
attributes in proxied Probe Request frames.
2010-10-31 11:57:13 +02:00
Jouni Malinen
be88391dee WPS ER: Cache AP settings for APs that restart UPnP
This is needed to avoid issues with APs that restart their UPnP,
e.g., when ER reconfigures them. The previously known settings are
now cached and taken into use if an AP is detected to leave
(ssdp:byebye) and then return.
2010-10-25 22:22:07 +03:00
Jouni Malinen
ed159ad41b WPS ER: Add more details to wps_er_pbc failure returns
Indicate the reason for the failure when wps_er_pbc is rejected.
2010-10-25 21:59:25 +03:00
Jouni Malinen
669f322d0e WPS ER: Fix SetSelectedRegistrar to include wildcard AuthorizedMACs
This is required by WPS 2.0, so add the wildcard address to
AuthorizedMACs if no addresses are in the list.
2010-10-25 21:45:29 +03:00
Jouni Malinen
20ebd9c4b9 WPS ER: Only activate PBC mode on single AP
Verify that the UUID given to wps_er_pbc command is known and only
activate PBC mode on the matching AP. The UUID can be that of the
AP or the station/Enrollee.
2010-10-25 21:41:10 +03:00
Jouni Malinen
3e7533b399 WPS ER: Show SetSelectedRegistrar events as ctrl_iface events
This makes it easier to figure out if something goes wrong in
preparing the AP for enrolling a station.
2010-10-25 21:29:22 +03:00
Jouni Malinen
450eddcfae hostapd: Add wps_config ctrl_interface command for configuring AP
This command can be used to configure the AP using the internal
WPS registrar. It works in the same way as new AP settings received
from an ER.
2010-10-21 16:49:41 +03:00
Jouni Malinen
ef10f4733f WPS ER: Add wps_er_set_config to use local configuration
This command can be used to enroll a network based on a local
network configuration block instead of having to (re-)learn the
current AP settings with wps_er_learn.
2010-10-20 13:37:01 +03:00
Jouni Malinen
2b67a67144 WPS UPnP: Add more debug for event subscription 2010-10-19 12:43:48 +03:00
Jouni Malinen
99ba7f889b WPS: Do not drop subscriptions based on max queue length
UPnP event subscriptions are not supposed to be dropped based on
whether events can be delivered quickly enough. Leave dropping to
happen only based on failed deliveries to avoid issues with a burst
of events kicking out still active subscribers.
2010-10-17 21:36:04 +03:00
Jouni Malinen
f30e698c08 WPS UPnP: Add more priority for queuing EAP events 2010-10-17 21:30:25 +03:00
Jouni Malinen
08a98b6544 WPS UPnP: Throttle WLANEvent notifications to 5 per second
Do not send more than five Probe Request WLANEvent notifications
per second. Even though the limit should in theory apply to all
WLANEvents, it is better not to drop EAP notifications because
of Probe Request frames and really, the only real reason for
event bursts is Probe Request frames.
2010-10-17 21:24:12 +03:00
Jouni Malinen
3904567d0b WPS: Limit Probe Request event queuing if subscriber may have left
Instead of queuing all events for a subscriber, only queue more
important events if delivery of event notifications starts failing.
This allows more time for the subscriber to recover since the maximum
queue length if not reached because of Probe Request frames only.
2010-10-17 20:58:58 +03:00
Jouni Malinen
d1e17fbc9c WPS: Schedule sending of pending events after failure
There is no point leaving these pending events waiting for something
new to trigger us to continue.
2010-10-17 20:57:11 +03:00
Jouni Malinen
8c3a2f11ab WPS: Separate local error from max queue length reached
Drop subscription only if the max queue length has been reached;
not based on any error.
2010-10-17 20:29:28 +03:00
Jouni Malinen
dd50c2d425 WPS UPnP: Improved event notification failure processing
Instead of dropping the subscription on first failure, allow up to
10 failures before dropping. In addition, drop the callback URLs
one by one instead of full subscription if only one URL is failing.
2010-10-17 20:26:03 +03:00
Jouni Malinen
10fb1a984f WPS: Convert assert() to error return 2010-10-17 20:23:51 +03:00
Jouni Malinen
1f1d4df09a WPS UPnP: Fix memory leak on retry case
The event entry needs to be freed when giving up on retries.
2010-10-17 20:22:03 +03:00
Jouni Malinen
3953627b35 WPS: Add more debug info for UPnP operations 2010-10-17 20:20:28 +03:00
Jouni Malinen
ed31b5ebcf WPS: Remove unused define
This timeout value was moved to now separate HTTP client implementation.
2010-10-17 20:15:08 +03:00
Jouni Malinen
75c3fc2e8a WPS: Cleaned up URL parser not to modify const buffer
There is no need to use '\0' termination here in string parsing,
so we may as well clean this up to follow the const declaration.
2010-10-17 20:12:54 +03:00
Jouni Malinen
75779589e8 WPS: Drop subscription if it does not have any valid callback address 2010-10-17 20:11:03 +03:00
Jouni Malinen
d0ebf3285f WPS: Remove unused error path code 2010-10-17 20:10:09 +03:00
Jouni Malinen
acd0ef4d3c WPS UPnP: Fix HTTP client timeout event code
The define here was overriding the event code enum value and that
resulted in incorrect code being used and WPS UPnP code ignoring the
timeout events.
2010-10-17 20:07:33 +03:00
Jouni Malinen
81611b95ff WPS: Add Config Error into WPS-FAIL events
This makes it easier to figure out what could have failed in the
WPS protocol and potentially provide more information for the
user on how to resolve the issue.
2010-10-14 20:49:54 +03:00
Jouni Malinen
68d6fe5693 WPS: Workaround broken Credential encoding from some D-Link APs
At least D-Link DIR-600 and DIR-825 have been reported to include
an extra octet after the Network Key attribute within a Credential
attribute. This can happen at least when they are provisioning an
open network.

Add a workaround to detect this incorrectly encoded attribute and
to skip the extra octet when parsing such a Credential.
2010-10-11 16:07:49 +03:00
Jouni Malinen
6d1031b971 WPS ER: Add more debug info on initialization errors 2010-09-24 16:05:58 -07:00
Jouni Malinen
a9d69254e3 WPS ER: Make sure PIN timeout does not interrupt PBC operation
We need to clear the selected registrar timeout from wps_er_learn
when stopping the protocol run at M7 (previously, this was done only
when WSC_Done was being processed). In addition, we need to cancel
the timeout when a new PBC operation is started.
2010-09-23 14:45:55 -07:00
Jouni Malinen
7d698c4ec7 WPS: Add more debug details for Credential building 2010-09-22 19:20:01 -07:00
Jouni Malinen
2d5e0d78e9 WPS ER: Fix debug message for protocol run done case
This is not a failure and should not be indicated as such in the
debug log.
2010-09-22 19:19:33 -07:00
Jouni Malinen
3237bfb1a3 WPS: Fix strict validation of encrypted data for WSC 2.0-only case
Need to figure out whether the message is from a WSC 2.0 -based
device based on the unencrypted attributes, not the contents of the
encrypted data since the Version2 subelement is only included in the
unencrypted area.
2010-09-22 19:17:13 -07:00
Jouni Malinen
370cb2a9ce WPS: Making some parsing messages use excessive debug level
This makes it easier to read -dd debug logs in environments that
have multiple WPS or P2P devices.
2010-09-22 11:39:58 -07:00
Jouni Malinen
82fb18472e WPS: Fix strict validation of (Re)Association Response
This frame is supposed to include Response Type, not Request Type
attribute.
2010-09-22 11:13:18 -07:00
Jouni Malinen
baf7081ccd WPS: Add MAC address to validation error message for Probe Request
This makes it easier to figure out which device is sending invalid
Probe Request frames.
2010-09-22 10:07:20 -07:00
Jouni Malinen
b4e34f2fdf WPS: Make testing operations configurable at runtime
Instead of build time options (CONFIG_WPS_TESTING_EXTRA_CRED and
CONFIG_WPS_EXTENSIBILITY_TESTING), use a single build option
(CONFIG_WPS_TESTING) and runtime configuration of which testing
operations are enabled. This allows a single binary to be used
for various tests.

The runtime configuration can be done through control interface
with wpa_cli/hostapd_cli commands:
Enable extensibility tests:
set wps_version_number 0x57
Disable extensibility tests (WPS2 build):
set wps_version_number 0x20
Enable extra credential tests:
set wps_testing_dummy_cred 1
Disable extra credential tests:
set wps_testing_dummy_cred 0
2010-09-21 19:51:23 -07:00
Jouni Malinen
ab98525399 WPS 2.0: Fix AuthorizedMACs check to accept wildcard address
We need to accept both our own address and the ff:ff:ff:ff:ff:ff
as an indication of the AP having authorized us.
2010-09-21 19:36:44 -07:00
Jouni Malinen
3379a3a795 WPS: Fix Beacon WPS IE on concurrent dualband AP in PBC mode
The Beacon frame must include UUID-E and RF Bands attributes when
in active PBC mode to allow stations to figure out that two BSSes in
PBC mode is not a PBC session overlap.
2010-09-20 15:32:29 -07:00
Jouni Malinen
ff28ccafd5 WPS: Add BSSID to strict validation error messages
This makes it easier to figure out which AP is sending invalid
Beacon or Probe Response frames.
2010-09-20 14:54:22 -07:00
Jouni Malinen
e64e3d245e WPS: Fix CONFIG_WPS_OOB build
The Version2 attribute was previous changed to a subelement and
the OOB code was missed during the change.
2010-09-19 17:18:43 -07:00
Ardong Chen
2f9929ffcc WPS: Allow pending WPS operation to be cancelled
A new ctrl_interface command, WPS_CANCEL, can now be used to cancel
a pending or ongoing WPS operation. For now, this is only available
with wpa_supplicant (either in station or AP mode). Similar
functionality should be added for hostapd, too.
2010-09-10 10:30:25 -07:00
Jouni Malinen
2d509b39b1 WPS: Fix ER PBC overlap detection build with P2P changes 2010-09-09 07:17:21 -07:00
Jouni Malinen
48e4377093 P2P: Fix WSC IE not to include two Device Name attrs with WPS 2.0 is used 2010-09-09 07:17:20 -07:00
Jouni Malinen
3c5126a41f P2P: Set Device Password ID in WPS M1/M2 per new rules
If the P2P client (WPS Enrollee) uses a PIN from the GO (Registrar),
Device Password ID in M1 & M2 is set to Registrar-specified.
2010-09-09 07:17:19 -07:00
Jouni Malinen
62281bc690 P2P: Do no process Probe Request with P2P wildcard SSID in WPS
The Probe Request frames used in P2P Device Discovery should not be
processed by the WPS implementation.
2010-09-09 07:17:16 -07:00
Jouni Malinen
935a948f97 P2P: Enable use of WPS Requested Device Type without WPS 2.0 2010-09-09 07:17:16 -07:00
Jouni Malinen
63675def6e P2P: Add Device Name into WPS IE in Probe Request frames 2010-09-09 07:17:16 -07:00
Jouni Malinen
fdc9eeb175 WPS 2.0: Convert new attributes into WFA vendor extension
The WSC 2.0 specification moved to use another design for the new
attributes to avoid backwards compatibility issues with some
deployed implementations.
2010-09-09 06:07:49 -07:00
Jouni Malinen
ac4dcaf7bf WPS 2.0: Fix strict mode validation of UPnP MAC Address format
This was supposed to only reject the message from WPS 2.0 ER, not from
WPS 1.0 ER.
2010-09-09 06:07:49 -07:00
Jouni Malinen
ecece754db WPS: Add more debug prints for authorized MACs operations 2010-09-09 06:07:49 -07:00
Jouni Malinen
498cdee0c7 WPS ER: Use PBC overlap detection
ER should follow same rules as internal Registrar in an AP for
session overlap detection.
2010-09-09 06:07:49 -07:00
Jouni Malinen
6a4477236e WPS 2.0: Only reject Probe Request frames from WPS 2.0 devices 2010-09-09 06:07:49 -07:00
Jouni Malinen
e69b86b71d WPS 2.0: By default, use strict validation reject only with WPS 2.0 2010-09-09 06:07:49 -07:00
Jouni Malinen
5fabd9fefb WPS: Fix strict validation to mandate Network Index attribute
While this attribute is is now deprecated, it is still required
for backwards compatibility. Better check this if strict validation
is enabled.
2010-09-09 06:07:49 -07:00
Jouni Malinen
e6e25d37a3 WPS 2.0: Use strict validation of NewWLANEventMAC only with WPS 2.0
This avoids some testing issues with WPS 1.0 implementations while
maintaining strict validation for WPS 2.0 implementations.
2010-09-09 06:07:49 -07:00
Jouni Malinen
b68ccf4048 WPS ER: Do not use SetSelectedRegistrar when learning/configuring AP 2010-09-09 06:07:49 -07:00
Jouni Malinen
ad4741183f WPS 2.0: Make sure PHY/VIRT flag gets set for PBC 2010-09-09 06:07:48 -07:00
Jouni Malinen
168f840169 WPS 2.0: Add strict validation of SetSelectedRegistrar attributes 2010-09-09 06:07:48 -07:00
Jouni Malinen
545ee4fd3d WPS 2.0: Add wildcard AuthorizedMACs if Enrollee address is not known 2010-09-09 06:07:48 -07:00
Jouni Malinen
53587ec183 WPS 2.0: Make WSC 2.0 support to be build option (CONFIG_WPS2)
For now, the default build will only include WSC 1.0 support.
CONFIG_WPS2=y can be used to add support for WSC 2.0.
2010-09-09 06:07:48 -07:00
Jouni Malinen
c15a854aec WPS 2.0: Add tool for testing protocol extensibility
This is disabled by default and can be enabled by defining
CONFIG_WPS_EXTENSIBILITY_TESTING.
2010-09-09 06:07:48 -07:00
Jouni Malinen
4a34969824 WPS: Add a test mechanism for adding an extra credential into M8
This can be used to build a test version of ER that adds an extra
Credential attribute into M8.
2010-09-09 06:07:48 -07:00
Jouni Malinen
54f489be45 WPS 2.0: Validate WPS attributes in management frames and WSC messages
If CONFIG_WPS_STRICT is set, validate WPS IE(s) in management frames and
reject the frames if any of the mandatory attributes is missing or if an
included attribute uses an invalid value. In addition, verify that all
mandatory attributes are included and have valid values in the WSC
messages.
2010-09-09 06:07:48 -07:00
Jouni Malinen
ed1c1ebfb4 WPS 2.0: Ignore WEP Credentials as station Enrollee
Ignore Credential if it is for a WEP network. Reject the message if
no valid Credential is found.
2010-09-09 06:07:48 -07:00
Jouni Malinen
6be2d7f826 WPS 2.0: Enforce new security policy of received AP Settings
When receiving new AP Settings from ER, reject WEP configuration
and upgrade WPA-Personal/TKIP only to mixed mode (i.e., add
WPA2-Personal/CCMP).
2010-09-09 06:07:48 -07:00
Jouni Malinen
6b633b4da7 WPS 2.0: Fix Probe Request WPS IE building to be able to fragment data
If all the device information attributes use their maximum lengths,
a single WPS IE is not enough to fit in all the data and as such,
we must be able to fragment the data. In addition, the wpabuf needs
to be allocated larger to fit in maximum data.
2010-09-09 06:07:47 -07:00
Jouni Malinen
dcc4d8be75 WPS 2.0: Disable WPS workarounds if CONFIG_WPS_STRICT is defined 2010-09-09 06:07:47 -07:00
Jouni Malinen
5314d652d4 WPS 2.0: Modify empty-string workaround to meet 2.0 rules
Instead of using 0x00 as the extra character, use space (' ') to
avoid failing tests that verify that the variable length string
attributes are not null terminated. In addition, this workaround
can now be disabled by defining CONFIG_WPS_STRICT for the build.
This can be done by adding following line to .config:
CFLAGS += -DCONFIG_WPS_STRICT

However, it should be noted that such a build may not interoperate
with some deployed WPS 1.0 -based implementations and as such, is
mainly designed for testing.
2010-09-09 06:07:47 -07:00
Jouni Malinen
6a857074f4 WPS 2.0: Add virtual/physical display and pushbutton config methods 2010-09-09 06:07:47 -07:00
Jouni Malinen
662bd57522 WPS 2.0: Add device attributes into Probe Request
Add Manufacturer, Model Name, Model Number, and Device Name attributes
into the WSC IE in the Probe Request frames.
2010-09-09 06:07:47 -07:00
Jouni Malinen
cfe1c3f1ef WPS 2.0: Add Request to Enroll attribute into Probe Request
Whenever wpa_supplication is using Request Type Enrollee, it is trying
to enroll into a network. Indicate this with the explicit inclusion of
Request to Enroll attribute with value TRUE.
2010-09-09 06:07:47 -07:00
Jouni Malinen
31fcea931d WPS 2.0: Add support for AuthorizedMACs attribute
Advertize list of authorized enrollee MAC addresses in Beacon and
Probe Response frames and use these when selecting the AP. In order
to provide the list, the enrollee MAC address should be specified
whenever adding a new PIN. In addition, add UUID-R into
SetSelectedRegistrar action to make it potentially easier for an AP
to figure out which ER sent the action should there be multiple ERs
using the same IP address.
2010-09-09 06:07:47 -07:00
Jouni Malinen
f439079e93 WPS 2.0: Add new attributes and update version negotiation
This adds definitions and parsing of the new attributes that were added
in WPS 2.0. In addition, the version negotiation is updated to use the
new mechanism, i.e., accept everything received and use the new Version2
attribute in transmitted messages.
2010-09-09 06:07:47 -07:00
Jouni Malinen
ef546700e2 WPS: Optimize M2 processing in AP Setup Locked case
There is no need to process the public key and generate keys if
the AP is going to reject this M2 anyway. This limits effect of
potential CPU DoS attacks in cases where AP PIN is disabled.
2010-08-24 16:42:26 +03:00
Jouni Malinen
5a1cc30f1a WPS: Add support for dynamic AP PIN management
A new hostapd_cli command, wps_ap_pin, can now be used to manage
AP PIN at runtime. This can be used to generate a random AP PIN and
to only enable the AP PIN for short period (e.g., based on user
action on the AP device). Use of random AP PIN that is only enabled
for short duration is highly recommended to avoid security issues
with a static AP PIN.
2010-08-24 16:35:37 +03:00
Jouni Malinen
035cc69d98 WPS: Use WSC_NACK if no device password is known on M2 RX
This can happen on the AP if the AP PIN is not configured and
the client tries to go through the protocol instead of just using
Registrar mode to receive M1 from the AP. It is cleaner to send
out the WSC_NACK instead of just stopping the protocol.
2010-08-24 12:56:11 +03:00
Jouni Malinen
92afbe9d63 WPS: Make DH debug prints easier to understand 2010-08-11 18:02:39 +03:00
Jouni Malinen
6195adda9b WPS: Allow AP to start in Enrollee mode without AP PIN for probing
In theory, this should not really be needed, but Windows 7 uses
Registrar mode to probe AP's WPS capabilities before trying to use
Enrollee and fails if the AP does not allow that probing to happen.
This allows the AP to start as an Enrollee and send M1, but refuse
to continue beyond that (M3 will not be sent if AP PIN is not known).
2010-07-26 18:12:08 -07:00
Jouni Malinen
08b19cb404 WPS: Limit WPS ER event_id < 2^31 bits to avoid issues with atoi()
Previously, large event_id values (> 2^31) resulted in integer
overflow that would make ER drop all events from the AP.
2010-07-20 22:56:58 -07:00
Jouni Malinen
c01106f3e8 WPS: Add more debug info for DH keys 2010-07-17 20:23:55 -07:00
Jouni Malinen
2f1ce78bf7 WPS: Add a workaround for OS X 10.6.3 and .4 (use PSK, not passphrase)
It looks like 10.6.3 and 10.6.4 do not like to receive Network Key
with WPA passphrase while PSK format still works. Use peer information
from M1 to figure out whether the Enrollee is likely to be OS X and
if so, force PSK format to be used for Network Key.
2010-07-05 15:37:47 -07:00
Jouni Malinen
612e9160e2 WPS: Add a workaround for parsing M1 from OS X 10.6
It looks like Mac OS X adds unexpected 0x00 padding to the end of M1.
Skip that padding to avoid interop issues.
2010-07-05 13:04:54 -07:00
Jouni Malinen
41e650ae5c WPS: Use different scan result sorting rules when doing WPS provisioning
The AP configuration may change after provisioning, so it is better
not to use the current security policy to prioritize results. Instead,
use WPS Selected Registrar attribute as the main sorting key and use
signal strength next without considering security policy or rate sets.
The non-WPS provisioning case remains as-is, i.e., this change applies
only when trying to find an AP for WPS provisioning.
2010-06-11 13:50:13 -07:00
Jouni Malinen
9abe9b2c35 WPS: Add workaround for missing Network Key attribute
Some deployed implementations do not include the mandatory Network
Key attribute when a WPS Credential is for an open network. Allow
this to improve interoperability since the actual key value is not
really needed for open networks.
2010-06-11 11:29:10 -07:00
Jouni Malinen
7d6640a62c WPS ER: Add command for configuring an AP
wps_er_config can now be used to configure an AP. It is similar to
wps_er_learn, but instead of only learning the current AP settings,
it continues to send M8 with the new settings for the AP.
2010-05-28 00:01:48 +03:00
Jouni Malinen
15dbf1291a WPS ER: Add ctrl_iface event for learned AP settings 2010-05-27 15:24:45 +03:00
Jouni Malinen
0848668513 WPS ER: Allow AP filtering based on IP address
wps_er_start command now takes an optional parameter that can be used
to configure a filter to only allow UPnP SSDP messages from the
specified IP address. In practice, this limits the WPS ER operations
to a single AP and filters out all other devices in the network.
2010-05-27 15:23:55 +03:00
Jouni Malinen
826fe5fec3 WPS ER: Fix Credential to use correct Enrollee MAC Address
When starting the protocol run with an Enrollee, clone the AP Settings
and replace the AP MAC Address with the Enrollee MAC Address so that the
correct value is then used in the Credential attribute in M8.
2010-05-27 15:22:44 +03:00
Jouni Malinen
ed7a09f914 Add WPS IE into (Re)Association Response frame if WPS is used
If the associating station indicates that it is intents to use WPS
by including WPS IE in (Re)Association Request frame, include WPS IE
in (Re)Association Response frame.
2010-05-26 18:46:08 +03:00
Jouni Malinen
99e437ad52 Fix WPS attribute parser to use correct pointer for Response Type 2010-05-26 17:12:30 +03:00
Jouni Malinen
8c0ef18199 Fix a typo in unused attribute name 2010-05-25 09:57:22 +03:00
Jouni Malinen
7992b07f6a Remove unnecessary SUBDIRS loops from src/*/Makefile
There are no subdirectories in any of these directories or plans
for adding ones. As such, there is no point in running the loop
that does not do anything and can cause problems with some shells.
2010-04-17 17:10:31 +03:00
Jouni Malinen
2c59362905 WPS: Add a workaround for incorrect NewWLANEventMAC format
Some ER implementation (e.g., some versions of Intel PROSet) seem to
use incorrect format for WLANEventMAC variable in PutWLANResponse.
Work around this by allowing various MAC address formats to be used
in this variable (debug message will be shown if the colon-deliminated
format specified in WFA WLANConfig 1.0 is not used).
2010-04-06 10:38:37 +03:00
Jouni Malinen
93368ca4a2 WPS: Do not include Label in default Config Methods
This avoids conflict with both Label and Display being included at
the same time (which would make it difficult to figure out which
PIN was actually used).
2010-04-04 08:14:02 +03:00
Jouni Malinen
11356a2ab5 WPS: Fix PBC session overlap detection to use Device Password Id
Active PBC mode is indicated by Device Password Id == 4, not Config Methods
attribute.
2010-04-04 08:13:59 +03:00
Jouni Malinen
bdda27eb17 Fix WPS IE in Probe Response frame to include proper Config Methods values
This attribute is supposed to indicate which methods the AP supports as
an Enrollee for adding external Registrars. It was left to 0 when the
AP code did not yet support external Registrars and was forgotten when
the ER support was added.
2010-03-13 13:39:22 +02:00
Jouni Malinen
ffd2c8cd4d Avoid warnings on unused function/variables if debug is disabled
CONFIG_NO_STDOUT_DEBUG removes wpa_printf() calls, so need to ifdef
some function and variable definitions to avoid compiler warnings.
2010-03-06 16:37:57 +02:00
Kel Modderman
09bd6e8cca wpa_supplicant: fix FTBFS on Debian GNU/kFreeBSD
This patch allows wpa_supplicant to compile on Debian's kfreebsd
architectures.

Patch by Stefan Lippers-Hollmann based on work done by Petr Salinger
and Emmanuel Bouthenot for 0.6.X (http://bugs.debian.org/480572).
2010-03-06 10:16:47 +02:00
Jouni Malinen
e0b3b3cb77 WPS: Fix AP operation with internal Registrar when ER is also active
Ignore the pending WPS message from ER (PutWLANReseponse action) if the
internal Registrar has already sent out M2.
2010-02-12 12:38:14 +02:00
Jouni Malinen
68fd595fa5 WPS ER: Check uuid_str2bin() return value 2010-01-10 22:12:55 +02:00
Jouni Malinen
4f6050e796 WPS ER: Verify os_get_random() return value 2010-01-10 22:08:43 +02:00
Jouni Malinen
b2180f4a89 Check WPS attr build helper return value
These are hardcoded to return success, but should check the value
anyway.
2010-01-10 20:49:22 +02:00
Jouni Malinen
612162430f WPS: Remove unused mac_addr_text parameter from get_netif_info() 2010-01-09 16:57:15 +02:00
Jouni Malinen
dc5a08c053 WPS: Fix Probe Request processing to handle missing attribute
WPS IE parsing for PBC mode did not check whether the UUID-E attribute
was included before dereferencing the pointer. This could result in the
AP crashing when processing and invalid Probe Request frame.
2010-01-01 23:38:51 +02:00
Jouni Malinen
c2f5126941 WPS: Add Enrollee-seen event message and wpa_gui-qt4 Peers entry
This can be used to show active Enrollees in AP mode to make it
easier to provision a new device.
2009-12-28 16:24:04 +02:00
Jouni Malinen
9fdeaf8f3a WPS: Fix a memory leak if set_ie_cb() is not set
Skip WPS IE building for Beacon and Probe Response frames is set_ie_cb()
is not set. This fixes a memory leak and optimizes operations by not
allocating memory and building the WPS IEs unnecessarily.
2009-12-25 01:29:59 +02:00
Jouni Malinen
14f7938660 Merge driver ops set_wps_beacon_ie and set_wps_probe_resp_ie
set_ap_wps_ie() is not used to set WPS IE for both Beacon and Probe
Response frames with a single call. In addition, struct wpabuf is used
instead of separate u8* and length fields. This avoids duplicated
allocation of the IEs and simplifies code in general.
2009-12-24 19:46:06 +02:00
Jouni Malinen
c0e4dd9eeb WPS: Make Config Methods configurable for wpa_supplicant
This adds config_methods configuration option for wpa_supplicant
following the design used in hostapd. In addition, the string is
now parsed in common code from src/wps/wps_common.c and the list
of configurable methods include all the defined methods from
WPS 1.0h spec.
2009-12-21 15:59:25 +02:00
Jouni Malinen
b64576fcf5 WPS: Prefer PSK format if Enrollee does not advertise Display
Since an Enrollee that does not advertise display as one of the
Config Methods is unlikely to be able to show the ASCII passphrase
to the user, prefer PSK format with such an Enrollee to reduce key
derivation time. This can help with some low-powered devices that
would take long time to derive the PSK from the passphrase.
2009-12-21 12:58:02 +02:00
Jouni Malinen
f3f2eeba01 WPS: Add option for forcing Registrar to use PSK format in Credential
The use_psk_key parameter can now be used to force the Registrar to
use PSK format instead of ASCII passphrase when building a Credential
for the Enrollee. For now, this is not enabled, but it could be enabled
either based on external (to WPS) configuration or automatically set
based on some WPS attribute values from the Enrollee.
2009-12-21 12:46:19 +02:00
Jouni Malinen
1a1bf008cb WPS ER: Delay wpa_supplicant termination to allow unsubscription
Instead of forcefully deinitializing ER immediately, give it some
time to complete unsubscription and call eloop_terminate() only once
ER code has completed its work.
2009-12-19 23:47:54 +02:00
Jouni Malinen
e46338fc76 WPS ER: Unsubscribe from AP events whenever removing the AP entry
Store the subscription identifier during subscription process and use
this to unsubscribe from events when removing the AP.
2009-12-19 23:20:22 +02:00
Jouni Malinen
187533a4c5 WPS: Convert Registrar PIN list to use struct dl_list 2009-12-19 22:26:55 +02:00
Jouni Malinen
96f5234735 WPS ER: Convert lists to use struct dl_list 2009-12-19 22:14:06 +02:00
Jouni Malinen
45767a9597 WPS: Remove unused net_if copy 2009-12-19 21:58:00 +02:00
Jouni Malinen
a9f92c487f WPS: Remove parent pointer from advertisement state machine 2009-12-19 14:51:36 +02:00
Jouni Malinen
158aff0035 WPS: Convert struct advertisement_state_machine to use struct dl_list 2009-12-19 14:46:52 +02:00
Jouni Malinen
ea8f09acb2 WPS: Remove unused struct subscr_addr parent pointer 2009-12-19 14:30:49 +02:00
Jouni Malinen
f1de40f728 WPS: Convert struct wps_event_ to use struct dl_list 2009-12-19 14:29:01 +02:00
Jouni Malinen
ec32c29471 WPS: Convert struct subscription to use struct dl_list 2009-12-19 14:15:43 +02:00
Jouni Malinen
f98b440c47 WPS: Convert struct subscr_addr to use dl_list 2009-12-19 13:47:00 +02:00
Jouni Malinen
7e683ceeb4 WPS: Handle Selected Registrar as a union of info from all Registrars
Instead of using the latest selected registrar change, collect selected
registrar information separately from all registrars and use the union
of this information when building the WPS IE for Beacon and Probe
Response frames.

Note: SetSelectedRegistrar UPnP action does not include a unique
identifier, so the ER matching routine is based only on the IP address
of the ER. In theory, there could be multiple ERs using the same IP
address (but different port or URL), so there may be some corner cases
that would not always match the correct ER entry at the AP. Anyway, this
is not really expected to occur in normal use cases and even if it did
happen, the selected registrar information is not any worse than it was
before when only the last change from any registrar for being
advertized.
2009-12-12 16:54:59 +02:00
Jouni Malinen
6a029035f5 WPS: Move POST URL validation into web_connection_parse_post()
This is more logical location for checking the URL and potentially
handling a call to another URL handler. In addition, return 404 error,
not invalid UPnP action, if the URL does not match.
2009-12-12 16:48:50 +02:00
Jouni Malinen
ed74dcd512 WPS: Remove an obsolete comment about UPnP actions and callbacks 2009-12-12 16:48:18 +02:00
Jouni Malinen
5e9c730a2b WPS: Remove unnecessary GetDevice and PutMessage callbacks
These callbacks can be handled internally within core WPS code, so there
is no need to go through wps_hostapd.c with a callback function that is
just calling back into the core WPS code.
2009-12-12 16:47:39 +02:00
Jouni Malinen
d0d45d8276 WPS: Remove unnecessary SetSelectedRegistrar callback
This can be handled internally within core WPS code, so there is no
need to go through wps_hostapd.c with a callback function that is just
calling back into the core WPS code.
2009-12-12 16:46:33 +02:00
Jouni Malinen
03da66bd59 Remove src/crypto from default include path
In addition, start ordering header file includes to be in more
consistent order: system header files, src/utils, src/*, same
directory as the *.c file.
2009-11-29 23:04:43 +02:00
Jouni Malinen
90973fb2fd Remove src/common from default header file path
This makes it clearer which files are including header from src/common.
Some of these cases should probably be cleaned up in the future not to
do that.

In addition, src/common/nl80211_copy.h and wireless_copy.h were moved
into src/drivers since they are only used by driver wrappers and do not
need to live in src/common.
2009-11-29 17:51:55 +02:00
Jouni Malinen
120158cc8b Move uuid_gen_mac_addr() from uuid.c into src/wps
This removes the only src/crypto dependency from src/utils files.
2009-11-29 13:15:32 +02:00
Jouni Malinen
8d5aca73bb Fix doxygen file level comments 2009-11-28 21:34:14 +02:00
Jouni Malinen
e8f5625c45 Fix doxygen file level comments 2009-11-28 21:14:36 +02:00
Jouni Malinen
ed45947e9b WPS: Update couple of missed Primary Device Type uses 2009-11-26 11:54:37 +02:00
Jouni Malinen
96750ea5e5 WPS: Clean up Primary Device Type handling
Use shared functions for converting Primary Device Type between binary
and string formats. In addition, use array of eight octets instead of a
specific structure with multiple fields to reduce code complexity.
2009-11-26 11:39:29 +02:00
Jouni Malinen
8e2c104fa1 Resolve some sparse warnings
Mainly, this is including header files to get definitions for functions
which is good to verify that the parameters match. None of these are
issues that would have shown as incorrect behavior of the program.
2009-11-25 00:57:00 +02:00
Jouni Malinen
3c2166d63c WPS: Do not try to send byebye advertisements if socket is not valid
If initialization fails, we could potentially try to sendto() on -1
socket which would fail. No point in doing that, so just return early
from the function.
2009-11-21 22:00:33 +02:00
Jouni Malinen
11ff95783e WPS ER: Deinitialize protocol instance with STA after completion
In addition, remove the WPS ER Enrollee entry 10 seconds after
successful completion of the protocol run.
2009-11-21 18:39:12 +02:00
Jouni Malinen
a34a330706 WPS ER: Use random event identifier in event URL
This avoids some issues in cases where the ER has been started and
stopped multiple times on the same address and an AP may have stored
multiple event notification addresses for the same ER. The random
identifier allows the ER to filter out unexpected messages from further
processing.
2009-11-21 18:15:37 +02:00
Jouni Malinen
3f6dc111ff WPS: Cleanup subscription URL list handling
Do not give the allocated memory to the subscription code since it was
not using it as-is anyway. This makes it easier to understand who owns
the allocation an is responsible of freeing it. This may potentially
fix some memory leaks on error paths.
2009-11-21 18:06:02 +02:00
Jouni Malinen
ec72bd0c77 WPS ER: Move SSDP functionality into a separate file 2009-11-21 17:26:23 +02:00
Jouni Malinen
e694b34474 WPS ER: Add more AP information into the ctrl_interface message
This allow wpa_gui to show AP BSSID, WPS State (configured/unconfigured),
and primary device type.
2009-11-21 13:34:23 +02:00
Jouni Malinen
c3016248f4 WPS ER: Fetch AP's M1 to learn device type and WPS state 2009-11-21 13:13:02 +02:00
Jouni Malinen
52a45d20dd WPS ER: Use (addr,UUID) as the key for AP entries
This allows multiple WPS AP instances to be supported per IP address.
2009-11-21 12:51:40 +02:00
Jouni Malinen
7a082a83f0 WPS ER: Stop AP unlink loop on match
There is no need to continue through the list after this, since the
same AP entry can only be listed once.
2009-11-21 12:18:24 +02:00
Jouni Malinen
6a1e492a81 WPS ER: Move STA entry unlinking into a separate function 2009-11-21 12:18:03 +02:00
Jouni Malinen
7c04d5ec6c WPS ER: Fix AP entry freeing on timeout
Must unlink the entry first before trying to remove it to avoid
leaving behind pointers to freed memory.
2009-11-21 12:12:49 +02:00
Jouni Malinen
b3f371cabf WPS ER: Refresh ER data on WPS_ER_START when already started
This sends out the AP and Enrollee notifications for all tracked
devices and generates a new SSDP search to find more APs.
2009-11-20 21:57:30 +02:00
Jouni Malinen
7c009db2a6 WPS ER: Fix Enrollee entry freeing on timeout
Must unlink the entry first before trying to remove it to avoid
leaving behind pointers to freed memory.
2009-11-20 21:56:39 +02:00
Jouni Malinen
4bdd556886 WPS: Fix MAC Address inside Credential be that of Enrollee's
The WPS 1.0h specification is quite unclear on what exactly should be
used as the MAC Address value in the Credential and AP Settings. It
looks like this should after all be the MAC Address of the Enrollee,
so change Registrar implementation to use that address instead of the
AP BSSID.

In addition, add validation code to the Enrollee implementation to
check the MAC Address value inside Credential (and also inside AP Settings)
to make sure it matches with the Enrollee's own address. However, since
there are deployed implementations that do not follow this interpretation
of the spec, only show the mismatch in debug information to avoid breaking
interoperability with existing devices.
2009-11-19 00:31:57 +02:00
Jouni Malinen
33417cd75c WPS ER: Clear WPS protocol run on PutMessage failure 2009-11-15 22:56:39 +02:00
Jouni Malinen
2c073ad43d WPS ER: Deinit WPS protocol data when freeing AP entry 2009-11-15 22:53:10 +02:00
Jouni Malinen
cef4652f2c WPS ER: Use learnt AP settings to build credentials for an Enrollee 2009-11-15 22:46:30 +02:00
Jouni Malinen
e64dcfd54b WPS ER: Add command for fetching current AP settings 2009-11-15 22:27:06 +02:00
Jouni Malinen
82b857ec0b WPS: Determine the OpCode based on message type attribute (UPnP)
This allows WSC_ACK and WSC_NACK to be processed correctly in the AP
when operating as an Enrollee with an ER over UPnP transport.
2009-11-15 22:23:49 +02:00
Jouni Malinen
f6d23cfd9e WPS ER: Do not try to process AP Settings in proxied M7 to ER
In this case, the Enrollee is not an AP, so do not try to process
AP Settings in M7.
2009-11-15 18:54:37 +02:00
Jouni Malinen
564cd7fa2c WPS ER: Add preliminary PBC support
This will need some additional code in wps_er_pbc() to handle PBC mode
enabling for a single AP only. For now, this can only be expected to work
when the ER is connected to a single AP.
2009-11-15 18:46:03 +02:00
Jouni Malinen
5d34ab644d WPS ER: Only send Enrollee notification on Probe Request and M1
No need to do this for M3..M7 or NACK/ACK/Done messages.
2009-11-15 18:29:19 +02:00
Jouni Malinen
b78bc3a37e WPS ER: Add ctrl_iface notifications for AP/Enrollee add/remove 2009-11-15 12:07:27 +02:00
Jouni Malinen
462adee5fe WPS ER: Store AP UUID in binary format for future use 2009-11-15 11:07:20 +02:00
Jouni Malinen
fcac668faa WPS: Use a dummy WSC_ACK as WLANEvent as the initial event if needed
UPnP device architecture specification requires all evented variables to
be included in the initial event message after subscription. Since this
can happen before we have seen any events, generated a dummy event
(WSC_ACK with all-zeros nonces) if needed.
2009-11-15 01:11:28 +02:00
Jouni Malinen
44577e4c2e WPS: Send SSDP byebye notifications when stopping UPnP advertisements
This will notify control points of the services going away and allows
them to notice this without having to wait timeout on the
initial advertisements.
2009-11-15 00:46:58 +02:00
Jouni Malinen
d806a5588e WPS: Remove derivation of management keys
MgmtAuthKey and MgmtEncKey were not used for anything and are unlikely
to ever be used, so better remove the code to reduce binary size.
2009-11-14 14:18:15 +02:00
Jouni Malinen
00785aba71 WPS: Remove unused WFA WLANConfig Service actions
This removes following WFA WLANConfig Service actions and the related
state variables: GetAPSettings, SetAPSettings, DelAPSettings,
GetSTASettings, SetSTASettings, DelSTASettings, RebootAP,
ResetAP, RebootSTA, ResetSTA.

While WFA WLANConfig Service version 1.0 claims that some of these are
mandatory to implement for an AP, there are no known implementations
supporting these actions neither in an AP/proxy or an External Registrar
that would use them. These are unlikely to be supported in the future
either and as such, it is just simpler to get rid of them to clean up
the implementation and reduce code size.
2009-11-14 14:08:58 +02:00
Jouni Malinen
7ec2e26ddf WPS ER: Fix Op-Code for WSC_{ACK,NACK,Done}
When using UPnP transport, the Op-Code is not included, but the WPS
frame processing will need this. Generate a matching Op-Code based
on the message type.
2009-11-13 22:40:27 +02:00
Jouni Malinen
ed835e539b WPS: Fix AP to proxy WSC_NACK to ER 2009-11-13 22:40:07 +02:00
Jouni Malinen
04f5d74077 WPS: Fix OpCode when proxying WSC_ACK or WSC_NACK from ER
Previously, WSC_MSG was hardcoded for every message from ER, but
this needs to be changed based on message type to send a valid
message to the Enrollee via EAP transport.
2009-11-13 22:29:31 +02:00
Jouni Malinen
72df2f5fc6 WPS ER: Add PIN configuration and SetSelectedRegistrar call
New PINs can now be added to WPS ER. This results in the ER code
using SetSelectedRegistrar to modify AP state so that Enrollees
will be able to notice the actice registrar more easily.
2009-11-13 22:07:11 +02:00
Jouni Malinen
d64d9ddf6c WPS: Fix http_link_update() to nul terminate the result 2009-11-13 22:05:11 +02:00
Jouni Malinen
ecc6d04b89 WPS ER: Add PutWLANResponse generation and transmission
This allows the M2D message to be transmitted as a response to the
Enrollee via the proxying AP.
2009-11-12 01:24:50 +02:00
Jouni Malinen
b345031997 WPS ER: Add STA/Enrollee entries and start processing EAP messages
This keeps STA/Enrollee entries up to date and sets up registration
protocol session. M1 is processed and M2D generated, but the there
is no code yet to transmit the response back to the AP with
PutWLANResponse.
2009-11-11 23:50:17 +02:00
Jouni Malinen
dc6d9ac250 WPS ER: Parse WLANEvent notifications and send HTTP response
The receive Probe Request and EAP-WSC notifications are now parsed
(including the TLVs in them) and contents is shown in the debug log.
Actual processing of the received information is still missing (TODO
comments indicate the needed functionality).
2009-11-11 00:23:22 +02:00
Jouni Malinen
efa6481438 WPS: Fixed printf size_t warning on 32-bit builds 2009-11-10 11:30:11 +02:00
Jouni Malinen
097c7b3723 WPS ER: Subscribe to UPnP events
This adds code to start a HTTP server and to subscribe to UPnP events
from each discovered WPS AP. The event messages are received, but there
is not yet any code to actually parse the contents of the event.
2009-11-09 20:01:50 +02:00
Jouni Malinen
875a4e5936 WPS: Read HTTP request within HTTP server code
This removes HTTP related code from wps_upnp_web.c and makes it easier
to use HTTP server functionality for new uses (e.g., WPS ER).
2009-11-08 22:33:34 +02:00
Jouni Malinen
b905c4a398 WPS: Add HTTP server module
Clean up code so that UPnP implementation does not need to include all
the HTTP functionality. In addition, make it easier to share HTTP server
functionality with other components in the future.
2009-11-08 17:26:55 +02:00
Jouni Malinen
585774f28a WPS ER: Fetch and parse device description 2009-11-08 16:46:03 +02:00
Jouni Malinen
0b40d03394 WPS: Move generic UPnP XML helper functionality into a separate file 2009-11-08 14:06:01 +02:00
Jouni Malinen
092794f480 WPS: Add HTTP client module to clean up code
Instead of implementing HTTP client functionality inside
wps_upnp_event.c, use a generic HTTP client module to do this. The HTTP
client code can now be shared more easily for other purposes, too.
2009-11-08 12:35:37 +02:00
Jouni Malinen
b02ee4a228 WPS: Mark functions static
These functions are used only within wps_upnp_event.c.
2009-11-07 17:04:19 +02:00
Jouni Malinen
e9bcfebfce WPS: Add initial part of External Registrar functionality
This is the first step in adding support for using wpa_supplicant as a
WPS External Registrar to manage APs over UPnP. Only the device
discovery part is implemented in this commit.
2009-11-07 12:41:01 +02:00
Jouni Malinen
0ae7b08691 Work around some gcc 4.4 strict-aliasing warnings
gcc 4.4 ends up generating strict-aliasing warnings about some very common
networking socket uses that do not really result in a real problem and
cannot be easily avoided with union-based type-punning due to struct
definitions including another struct in system header files. To avoid having
to fully disable strict-aliasing warnings, provide a mechanism to hide the
typecast from aliasing for now. A cleaner solution will hopefully be found
in the future to handle these cases.
2009-11-04 19:49:14 +02:00
Andriy Tkachuk
72ffc08242 WPS: SelectedRegistrar expiration for internal PIN registrar
Though we have such a timeout when handling SetSelectedRegistrar UPnP
message from an external registrar, it looks like we don't have one when
the internal registrar is activated for PIN connection. Thus we set the
SelectedRegistrar flag when AP is activated for PIN connection but we
never reset it - not by some timeout, nor when registration succeeds.
This lead to situations where AP everlastingly declare that it is
activated for WPS PIN connection when in reality it is not.

Use the same timeout (and also success with PIN) to clear the selected
registrar flag when using internal registrar, too.
2009-11-01 22:19:02 +02:00
Jouni Malinen
2e71444516 WPS: Abort ongoing PBC protocol run if session overlap is detected
If PBC session overlap is detected during an ongoing PBC protocol run,
reject the run (if M8, i.e., credentials, have not yet been sent). This
provides a bit longer monitoring time at the Registrar for PBC mode to
catch some cases where two Enrollees in PBC mode try to enroll
credentials at about the same time.
2009-11-01 21:59:30 +02:00
Oleg Kravtsov
63330c6832 WPS: Add PBC overlap and timeout events from WPS module
This provides information about PBC mode result from the WPS Registrar
module. This could be used, e.g., to provide a user notification on the
AP UI on PBC failures.
2009-11-01 21:26:13 +02:00
Jouni Malinen
7e3a67514f WPS: Use Config Error 12 to indicate PBC overlap in M2D
If PBC session overlap is detected between button press on the registrar
and M1 is reception, report session overlap with the Config Error
attribute in M2D to the Enrollee.
2009-11-01 20:57:36 +02:00
Jouni Malinen
f042122a57 Allow the internal DH implementation to be overridden
Crypto library wrappers can now override the internal DH (group 5)
implementation. As a starting point, this is done with OpenSSL. The
new mechanism is currently available only for WPS (i.e., IKEv2 still
depends on the internal DH implementation).
2009-10-11 19:17:22 +03:00
Jouni Malinen
611ed49118 Add parsed information from WPS IE(s) into scan results
This makes it easier for external programs to show WPS information
since they do not need to parse the WPS IE themselves anymore.
2009-09-11 17:14:49 +03:00
Jouni Malinen
e9a2bca6f5 WPS: Add parsing of AP Setup Locked attribute 2009-09-11 17:13:59 +03:00
Jouni Malinen
2678509dec WPS: Store device info and make it available through AP ctrl_iface
Store a copy of device attributes during WPS protocol run and make it
available for external programs via the control interface STA MIB
command for associated stations. This gives access to device name and
type which can be useful when showing user information about associated
stations.
2009-09-07 22:09:13 +03:00
Jouni Malinen
52eb293dd2 WPS: Add support for AP reconfiguration with wps_reg
wpa_supplicant can now reconfigure the AP by acting as an External
Registrar with the wps_reg command. Previously, this was only used
to fetch the current AP settings, but now the wps_reg command has
optional arguments which can be used to provide the new AP
configuration. When the new parameters are set, the WPS protocol run
is allowed to continue through M8 to reconfigure the AP instead of
stopping at M7.
2009-09-06 13:58:15 +03:00
Masashi Honma
fe23eb5696 WPS: Aggregate deinit calls in WPS OOB
In WPS OOB, deinit_func() is called from 3 locations.
This patch aggregates these to one.
2009-08-26 23:34:54 +03:00
Jouni Malinen
064bb8232c Add root .gitignore file to cleanup ignore lists
This removes need for local configuration to ignore *.o and *~
and allows the src/*/.gitignore files to be removed (subdirectories
will inherit the rules from the root .gitignore).
2009-06-29 21:47:19 +03:00
Jouni Malinen
4625a47f4b WPS: Change wpa_supplicant wps_reg to not send out M8
Since we do not currently support changing the AP settings received
from M7, there is no point in actually sending out the M8 that would
likely trigger the AP to reconfigure itself and potentially reboot.
For now, we just receive the AP settings in M7 and add a local network
configuration block based on those, but NACK the message. This makes
wps_reg work like wps_pin, but by using the AP PIN instead of a client
PIN.
2009-06-10 15:53:35 +03:00
Jouni Malinen
077a781f7a WPS: Add support for setting timeout for PIN
hostapd_cli wps_pin command can now have an optional timeout
parameter that sets the PIN lifetime in seconds. This can be used
to reduce the likelihood of someone else using the PIN should an
active PIN be left in the Registrar.
2009-05-26 17:44:44 +03:00
Jouni Malinen
826fff182f WPS: Add a workaround for auth/encr type flags mismatches
Some deployed implementations seem to advertise incorrect information
in this attribute. For example, Linksys WRT350N seems to have a
byteorder bug that breaks this negotiation. In order to interoperate
with existing implementations, assume that the Enrollee supports
everything we do.
2009-05-06 10:56:18 +03:00
Jouni Malinen
814aaa844a Fix small HTTP processing issues
Parse "Transfer-Encoding: chunked" properly.
Get more data if read buffer is empty when starting to process the body.
2009-04-15 11:18:09 +03:00
Jouni Malinen
73267b9ca4 WPS: Fix local configuration update after AP configuration
Update credential to only include a single authentication and
encryption type in case the AP configuration includes more than one
option. Without this, the credential would be rejected if the AP was
configured to allow more than one authentication type.
2009-03-30 19:00:55 +03:00
Jouni Malinen
bfd67fc44c Fix WPS UPnP SSDP on 32-bit targets
The memcpy was using incorrect size (of pointer; should have been of
data structure) for the client address. This ended up working on 64-bit
targets, but left part of the address uninitialized on 32-bit targets.
2009-03-26 15:32:02 +02:00
Jouni Malinen
22498d6dc3 Fix WPS UPnP build for FreeBSD 2009-03-21 21:00:37 +02:00
Jouni Malinen
9f98c48315 Fix doxygen function comment 2009-03-19 21:42:15 +02:00
Jouni Malinen
143a4bf632 WPS: Add a workaround for static WEP with Windows network probe
Windows XP and Vista clients can get confused about EAP-Identity/Request
when they probe the network with EAPOL-Start. In such a case, they may
assume the network is using IEEE 802.1X and prompt user for a
certificate while the correct (non-WPS) behavior would be to ask for the
static WEP key. As a workaround, use Microsoft Provisioning IE to
advertise that legacy 802.1X is not supported.

This seems to make Windows ask for a static WEP key when adding a new
network, but at least Windows XP SP3 was still marking IEEE 802.1X
enabled for the network. Anyway, this is better than just leaving the
network configured with IEEE 802.1X and automatic WEP key distribution.
2009-03-08 19:36:02 +02:00
Masashi Honma
e1ee6b600b WPS: Add support for NFC out-of-band mechanism
The new file wps_nfc.c and ndef.c implements NFC device independent
operation, wps_nfc_pn531.c implements NFC device dependent operation.

This patch is only for the following use case:
- Enrollee = wpa_supplicant
- Registrar = hostapd internal Registrar

Following NFC methods can be used:
- Enrollee PIN with NFC
- Registrar PIN with NFC
- unencrypted credential with NFC

Encrypted credentials are not supported.

Enrollee side operation:

Registrar side operation:

Example configuration.
CONFIG_WPS=y
CONFIG_WPS_NFC=y
CONFIG_WPS_NFC_PN531=y

I used NFC device "NXP PN531". The NFC device access method is
confidential, so I used outer library. Please download below files from
https://www.saice-wpsnfc.bz/index.php

[WPS NFC Library]
WpsNfcLibrary/WpsNfc.h
WpsNfcLibrary/WpsNfcType.h
WpsNfcLibrary/WpsNfcVersion.h
WpsNfcLibrary/linux/libnfc_mapping_pn53x.dll
WpsNfcLibrary/linux/wpsnfc.dll

[NFC Reader/Writer Kernel Driver]
NFCKernelDriver-1.0.3/linux/kobj/sonyrw.ko

<WiFi test>
The hostapd/wpa_supplicant with this patch passed below tests on
"Wi-Fi WPS Test Plan Version 1.6".
4.2.5 Add device using NFC Method with password token
(I used SONY STA instead of NXP STA.)

4.2.6 Add device using NFC Method with configuration token

5.1.9 Add to AP using NFC Method with password token
through internal registrar
(I used SONY AP instead of NXP AP.)

5.1.10 Add to AP using NFC Method with configuration token
through internal registrar
2009-03-06 16:16:22 +02:00
Masashi Honma
d7e9a48f66 Fix Enrollee WPS state attribute in AP
Only non-AP Enrollee should hard code the state to be not configured.
2009-02-27 17:01:17 +02:00
Jouni Malinen
116f7bb0a3 WPS UFD: Build OOB functionality only if UFD is enabled 2009-02-26 22:10:21 +02:00
Jouni Malinen
d5e2b2d274 WPS UFD: Use pre-configured DH keys only with OOB
The old behavior of generating new DH keys can be maintained for non-OOB
cases and only OOB (in this case, with UFD) will use the pre-configured
DH keys to allow the public key hash to be checked.
2009-02-26 22:09:35 +02:00
Jouni Malinen
7cbf51bbd8 WPS UFD: Remove oob_dev pointer from wps_context
This pointer and the especially the oob_dev->device_path does not remain
valid, so better not save it any longer than it is needed.
2009-02-26 22:07:55 +02:00
Jouni Malinen
1b39bad109 WPS UFD: Handle scandir() error and no matches results differently
Better make sure there are no memory leaks in case of 0 entries
found. In addition, the error string may be of use in the error case.
2009-02-26 22:06:11 +02:00
Jouni Malinen
e7f3c1f436 WPS UFD: Define macros for the UFD directory templates
This allows the UNIX vs. DOS path separators to be handled in the build.
2009-02-26 22:05:39 +02:00
Jouni Malinen
70e070461d WPS UFD: Use private data structure for oob_device_data
This gets rid of global variable use and may be needed to allow
concurrent access in some case if the interface is extended.
2009-02-26 22:04:49 +02:00
Jouni Malinen
390cd3105d WPS UFD: Make build conditional on CONFIG_WPS_UFD=y
Not all embedded devices have USB interface and it is useful to be able
to remove unneeded functionality from the binary. In addition, the
current implementation has some UNIX specific calls in it which may make
it not compile cleanly on all target systems.
2009-02-26 22:01:36 +02:00
Jouni Malinen
a79e73a1b1 WPS UFD: Use mkdir() instead of system("mkdir ..") 2009-02-26 22:00:29 +02:00
Masashi Honma
46bdb83acd WPS: Add UFD support (USBA out-of-band mechanism)
This patch is only for the following use case:
- Enrollee = wpa_supplicant
- Registrar = hostapd internal Registrar

Following UFD methods can be used:
- Enrollee PIN with UFD
- Registrar PIN with UFD
- unencrypted credential with UFD

Encrypted credentials are not supported.

Enrollee side operation:
wpa_cli -i ath0 wps_oob <device type> <mount point> <oob method>
    oob method = pin-e/pin-r/cred

wpa_cli -i ath0 wps_oob ufd /mnt/ pin-r

Registrar side operation:
./hostapd_cli -i ath0 wps_oob <device type> <mount point> <oob method>
    oob method = pin-e/pin-r/cred

hostapd_cli -i ath0 wps_oob ufd /mnt/ cred
2009-02-26 21:57:38 +02:00
Daniel Mierswa
d94d4bafbb Improved 'make install' (use BINDIR/LIBDIR, install shared objects) 2009-02-15 14:22:50 +02:00
Masashi Honma
363a9e2434 WPS: Set correct Selected Registrar Config Methods attribute
I tried PBC with the hostapd registrar.
I pushed the button with "hostap_cli WPS_PBC".
But hostapd registrar always sends Selected Registrar Config Methods
attribute=0x0000 in beacon/probe response.
2009-02-09 19:50:52 +02:00
Jouni Malinen
a3bfd14de1 Use os_strlcpy instead of os_strncpy when copying ifname
In theory, the ifname could be IFNAMSIZ characters long and there would
not be room for null termination.
2009-02-08 13:26:33 +02:00
Jouni Malinen
d0184cb25c UPnP: Renamed PutWLANResponse callback function to match action
No point in adding extra "event_" to the name.
2009-02-06 21:44:19 +02:00
Jouni Malinen
915c1ba3c5 WPS UPnP: Added support for multiple external Registrars
Allow more than one pending PutWLANMessage data to be stored (M2/M2D
from multiple external Registrars) and drop pending M2/M2D messages when
the Enrollee replies with M3.
2009-02-06 21:39:32 +02:00
Jouni Malinen
745f8b664d WPS UPnP: Add IP address and port details into debug messages
This makes it much easier to debug operations with multiple external
Registrars.
2009-02-06 19:04:55 +02:00
Jouni Malinen
b93b6004e4 WPS: Allow minor version differences in Version attribute check
Version attribute processing details are not described in the WPS spec,
but it is safer to allow minor version to change and only refuse to
process the message if major version is different from ours. This
matches with the behavior used in the Intel reference implementation.
2009-02-06 14:19:59 +02:00
Jouni Malinen
f65cbff3a3 WPS: Moved Version attribute validation into a shared function 2009-02-06 14:15:47 +02:00
Jouni Malinen
fda90ab4b7 UPnP: Removed shadowed variable 2009-02-06 14:05:17 +02:00
Andriy Tkachuk
25e31cccbe WPS: Set correct Device Password ID in M2
It looks like we don't set correspondent Device Password ID attribute in
M2 message during PBC registration. Without it TG185n STA was not able
to connect to our AP in PBC mode. Attached patch fixes this.
2009-02-06 14:03:34 +02:00
Jouni Malinen
e80e5163f8 UPnP: Minor coding style cleanup 2009-02-03 13:25:49 +02:00
Jouni Malinen
f620268f13 WPS: Add support for external Registrars using UPnP transport
This adds mostly feature complete external Registrar support with the
main missing part being proper support for multiple external Registrars
working at the same time and processing of concurrent registrations when
using an external Registrar.

This code is based on Sony/Saice implementation
(https://www.saice-wpsnfc.bz/) and the changes made by Ted Merrill
(Atheros) to make it more suitable for hostapd design and embedded
systems. Some of the UPnP code is based on Intel's libupnp. Copyrights
and licensing are explained in src/wps/wps_upnp.c in more detail.
2009-01-29 18:47:02 +02:00
Jouni Malinen
39034ce80f Fixed WPS Authenticator attribute processing after M2D
We must not replace M1 with M2D as the last_msg since we need M1 to
validate a possible M2 after M2D. Since M2D and ACK/NACK replies do not
include Authenticator attribute, we can just ignore M2D as far as
updating last_msg is concerned.
2009-01-28 11:59:29 +02:00
Jouni Malinen
1a5a04c3de WPS: Add a workaround for incorrect passphrase encoding in Network Key
External Registrar in Vista may include NULL termination in the Network
Key when encoding an ASCII passphrase for WPA/WPA2-PSK. As a workaround,
remove this extra octet if present.
2009-01-24 12:50:00 +02:00