Commit graph

261 commits

Author SHA1 Message Date
Jouni Malinen
50d06776c6 tests: Fix WEXT testing
Commit afb2e8b891 ('tests: Store P2P
Device ifname in class WpaSupplicant') did not take into account the
possibility of capa.flags not existing in get_driver_status() and broke
WEXT test cases. Fix this by checking that capa.flags is present before
looking at its value.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-05-14 18:59:47 +03:00
Jouni Malinen
df49b90e35 tests: Secure mesh and the first plink Open dropped
This is a regression test case to verify that MTK is calculated properly
also in this unexpected sequence.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-05-13 20:54:51 +03:00
Jouni Malinen
0663ae22ff tests: Do not use tabs for indentation
Be more consistent with indentation (always uses spaces in Python
files).

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-04-25 00:19:40 +03:00
Avraham Stern
5e65346ade tests: persistent_group_profile_add to support P2P Device interface
Modify the persistent_group_profile_add test to support configurations
that use a dedicated P2P Device interface by sending the ADD_NETWORK and
SET_NETWORK commands on the global control interface and specifying the
P2P Device interface name.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2016-04-24 23:45:16 +03:00
Avraham Stern
afb2e8b891 tests: Store P2P Device ifname in class WpaSupplicant
Add an attribute to class WpaSupplicant with the name of the
P2P Device interface. If a separate interface is not used for
P2P Device, this attribute will hold the name of the only used
interface (with functions also as the P2P Device management
interface).

This attribute will be used to direct P2P related commands to the
P2P Device interface, which is needed for configurations that use
a separate interface for the P2P Device.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2016-04-24 23:24:06 +03:00
Jouni Malinen
5a766accee tests: Convert Host() class to use list of arguments instead of string
It is better to use a list of command line arguments for the local
execution case and convert that to a space-separated string for the
remote case.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-04-24 20:16:30 +03:00
Janusz Dziedzic
d4944fad72 tests: Improve debug logs in hostapd/wpasupplicant with remote commands
Show more info when we are using remote wpaspy and UDP-based control
interface.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-03-20 21:49:35 +02:00
Janusz Dziedzic
8ce4855b23 tests: hostapd.py/wpasupplicant.py use Host when executing commands
Execute commands using the Host class. This enables use of remote hosts
as well.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-03-20 21:49:26 +02:00
Jouni Malinen
2b5488a4e1 tests: Return result from WpaSupplicant::global_request() in all cases
The no self.global_iface case was not returning the result from the
self.request() case. While this is not really a path that is supposed to
be used, make it return the response since it is at least theoretically
possible to get here.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-03-20 11:08:12 +02:00
Janusz Dziedzic
e3b36d420e tests: Add terminate support for hostapd/wpa_supplicant
Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-03-05 17:44:51 +02:00
Janusz Dziedzic
0fd4792b48 tests: Add UDP ctrl_iface support to wpasupplicant.py
Allow use of a remote host using wpaspy.Ctrl with UDP ctrl_iface
support.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-03-05 17:44:51 +02:00
Jouni Malinen
a89faedc22 tests: EAP-TLS error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-02-02 00:39:39 +02:00
Jouni Malinen
8251be17be tests: Speed up discovery_group_client and nfc_p2p_client
There is no need for these to go through a full scan when the GO
operating channel is known.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-01-06 18:56:31 +02:00
Jouni Malinen
e4ab0d9034 tests: Do not dump pending events in p2p_go_neg_init timeout=0 case
It was possible for the dump_monitor() call to drop a P2P-GO-NEG-FAILURE
event that was indicated quickly after the P2P_CONNECT command was
issued. This could result in grpform_reject test case failing to see the
expected event and fail the test due to "Rejection not reported".

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-31 22:41:21 +02:00
Jouni Malinen
b90b3eab1f tests: Clear ignore_old_scan_res explicitly in test cases where it is used
This parameter is used only in couple of test cases and there is no need
to maintain the code to reset it in WpaSupplicant::reset().

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-28 17:48:01 +02:00
Jouni Malinen
49d51a0dcb tests: Clear p2p_pref_chan explicitly in test cases where it is used
This parameter is used only in couple of test cases and there is no need
to maintain the code to reset it in WpaSupplicant::reset().

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-28 17:43:46 +02:00
Jouni Malinen
db3070d289 tests: Clear p2p_go_intent explicitly in test cases where it is used
This parameter is used only in couple of test cases and there is no need
to maintain the code to reset it in WpaSupplicant::reset().

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-28 17:40:25 +02:00
Jouni Malinen
cf3a9d8f06 tests: Clear p2p_add_cli_chan explicitly in test cases where it is used
This parameter is used only in couple of test cases and there is no need
to maintain the code to reset it in WpaSupplicant::reset().

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-28 17:33:17 +02:00
Jouni Malinen
721ec02da5 tests: Clear p2p_no_go_freq explicitly in test cases where it is used
This parameter is used only in couple of test cases and there is no need
to maintain the code to reset it in WpaSupplicant::reset().

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-28 17:33:09 +02:00
Jouni Malinen
35b61a496a tests: Verify P2P group formation with 80+80 MHz channel
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-25 22:43:38 +02:00
Ilan Peer
061190308d tests: wpa_supplicant interface creation in AP mode
Add a test case that creates a new interface in AP mode.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-11-22 17:54:07 +02:00
Jouni Malinen
7f2fea59ea tests: P2P device discovery and control character in Device Name
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-10-26 23:43:45 +02:00
Ilan Peer
a537887074 tests: Add role parameter to asp_provision
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-10-11 21:42:03 +03:00
Andrei Otcheretianski
a3dc75020a tests: Add extended listen functions to WpaSupplicant
Add p2p_ext_listen() and p2p_cancel_ext_listen() functions.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2015-10-07 17:07:21 +03:00
Jouni Malinen
d9052150eb tests: wpa_supplicant control socket and event burst
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-04 18:52:38 +03:00
Jouni Malinen
9425bb7828 tests: Dualband AP rejecting authentication from dualband STA on 2.4 GHz
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-05 19:11:02 +03:00
Max Stepanov
c1e31bdb7f tests: Add CPT parameter to WpaSupplicant asp_provision()
Add an optional CPT parameter to asp_provision() method of
WpaSupplicant.

Signed-off-by: Max Stepanov <Max.Stepanov@intel.com>
Reviewed-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-07-27 00:47:19 +03:00
Andrei Otcheretianski
1a1b015622 tests: Add asp_provision method to wpa_supplicant
Add asp_provision method which issues either P2PS PD Request or, if the
status is provided, continues the deferred flow by sending follow on
PD Request.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Max Stepanov <Max.Stepanov@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-07-26 21:45:35 +03:00
Jouni Malinen
c0183847d9 tests: Silence unnecessary get_driver_status() prints
Commit 53606b105c ('tests: Wait for scan
to complete on all interfaces in reset()') added option of passing
ifname to get_driver_status(). This could result in FAIL-NO-IFNAME-MATCH
returns that get printed out in "Ignore unexpected status-driver line"
messages if the interface is not found. Check for this case to avoid
that unnecessary print.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 18:26:16 +03:00
Andrei Otcheretianski
53606b105c tests: Wait for scan to complete on all interfaces in reset()
When WpaSupplicant executes reset() it waits until all the ongoing scans
are completed. However, it checks the status of the wlanX interface
only. If a dedicated P2P device interface is used, scan may be still
running on the P2P Device interface, e.g., due to P2P_FIND. This might
affect subsequent tests.

Fix this by waiting until the scan is done both on wlanX and P2P
Device interfaces.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-07-08 16:52:42 +03:00
Ilan Peer
a2168cf476 tests: Modify reset() to use the global control interface
Change the reset() method to use the global control interface
for resetting P2P state and also add a call to P2P_FLUSH.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-06-19 10:38:22 +03:00
Jouni Malinen
c1e38fec75 tests: Make flush_scan_cache() more robust
There seem to be cases where flush_scan_cache() was unable to clear all
BSS entries due to a hidden SSID BSS (SSID length 0) showing up again
from cfg80211 BSS table. Check for this and run the flush operation
again if any entries remain.

This fixes an issue where the following hwsim test case sequence
resulted in the last test case failing due to the old BSS entry from the
first test case being in place and showing unexpected flags information:
ap_hs20_min_bandwidth_home_hidden_ssid_in_scan_res
ap_hs20_remediation_required
ap_mixed_security

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-06-12 21:28:14 +03:00
Ben Rosenfeld
8e751cfa05 tests: Change list_networks() to use global interface with P2P
list_networks() always used the wlanX control interface to query for the
current list of networks. However, when a dedicated P2P Device is used,
the global control interface should be used when checking persistent
group network profiles.

Fix this by adding an optional parameter indicating that the P2P
networks are requested, and in such a case use the global control
interface.

In addition update test_p2p_persistent to use the argument when needed.

Signed-off-by: Ben Rosenfeld <ben.rosenfeld@intel.com>
2015-05-08 18:29:03 +03:00
Ben Rosenfeld
09f60224a5 tests: Remove all P2P networks in call to reset
When resetting a device, remove all the P2P networks to prevent
unexpected behavior in following tests. This is needed for the case
where P2P Device interface is used.

Signed-off-by: Ben Rosenfeld <ben.rosenfeld@intel.com>
2015-05-07 21:14:31 +03:00
Oren Givon
2380d80493 tests: TDLS link status test
Add a test case for checking TDLS link status.

Signed-off-by: Oren Givon <oren.givon@intel.com>
2015-05-03 17:24:38 +03:00
Jouni Malinen
138bf11852 tests: INTERFACE_ADD/REMOVE with vif without creation/removal
This is also a regression test for INTERFACE_ADD parsing.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-04-04 11:02:22 +03:00
Jouni Malinen
febf575200 tests: EAP-TTLS with TLS session ticket enabled
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-04-01 12:57:11 +03:00
Jouni Malinen
53f4ed68ee tests: WPA2-PSK AP with passphrase only in memory
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-28 11:08:31 +02:00
Jouni Malinen
25f2cb618c tests: INTERFACE_ADD/REMOVE with vif addition/removal
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-03-26 22:20:35 +02:00
Jouni Malinen
6d0b447464 tests: P2P_FIND with freq parameter to scan a single channel
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-02-28 22:06:24 +02:00
Jouni Malinen
7ebc7e8fa6 tests: wpa_supplicant DUMP/GET global parameter
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-02-08 22:49:58 +02:00
Jouni Malinen
2265376271 tests: INTERWORKING_ADD_NETWORK
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-02-08 22:49:58 +02:00
Jouni Malinen
874057da4e tests: Make wpas_ctrl_many_networks more robust under valgrind
It is possible for a low powered CPU to take excessively long time to
delete 1000 network blocks when running under valgrind. This would have
resulted in the test case failing and the following reset operation
timing out which would then stop the test sequence completely.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-02-08 13:25:35 +02:00
David Spinadel
bbcbbd3701 tests: Modify autogo_bridge test to use group interface
1. Add get_group_ifname() to wpasupplicant.py
2. Use the function to get the interface name for the bridge.

Signed-off-by: David Spinadel <david.spinadel@intel.com>
2015-02-07 15:37:13 +02:00
Jouni Malinen
c4668009d0 tests: Remove unnecessary use of sudo from test cases
run-tests.py is running as root, so sudo does not need to be used
anymore from within each test case.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-07 15:37:13 +02:00
Ilan Peer
fb9cf82eb3 tests: Add option to specify ifname to get_bss()
This is needed for cases that the group interface differs from the main
interface, i.e., when a dedicated P2P Device interface is used.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-02-05 13:48:40 +02:00
Ilan Peer
b0d697be91 tests: Use global control interface in wait_go_ending_session()
P2P_EVENT_GROUP_REMOVED is a global event, so use
wait_global_event() instead of wait_event().

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-02-05 12:50:44 +02:00
Jouni Malinen
a1512a0cc7 tests: wpa_supplicant and station interface in a bridge
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-31 17:28:08 +02:00
Jouni Malinen
d2432b8b7e tests: PMKSA cache size limit in wpa_supplicant
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-31 13:26:46 +02:00
Jouni Malinen
1f53fe0310 tests: P2P group formation using PBC multiple times in a row
This verifies that PBC session overlap detection does not get indicated
when forming the group with the same peer multiple times.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-01-22 20:53:03 +02:00
Jouni Malinen
a66d2248a0 tests: Close wlan5 control interface monitor more explicitly
There were couple of common cases where the control interface for the
dynamic wpa_supplicant instance could have been left in attached state
until Python ends up cleaning up the instance. This could result in
issues if many monitor interface events were queued for that attached
socket. Make this less likely to cause issues by explicitly detaching
and closing control interfaces before moving to the next test case.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-18 17:13:55 +02:00
Jouni Malinen
061cbb258f tests: domain_match checking against server certificate
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-14 15:45:18 +02:00
Jouni Malinen
c2096d9981 tests: bssid_blacklist and bssid_whitelist
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-10 17:35:53 +02:00
Eliad Peller
bc32f830f4 tests: wmm_ac_status and roaming case with WMM-AC
Make sure the wmm_ac_status command reflects correctly the existing
tspecs after add_ts/del_ts commands. Add a new test to verify all tspecs
are removed on roaming (while FT is not used).

Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
2015-01-04 18:57:23 +02:00
Jouni Malinen
a42f88f8e7 tests: bg_scan_period parameter configuration
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 19:44:40 +02:00
Jouni Malinen
5f35a5e27f tests: Add wait_connected() and wait_disconnected() helpers
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 13:10:09 +02:00
Jouni Malinen
c8836a4f03 tests: Allow dump_monitor() to be used without global monitor interface
It is possible for WpaSupplicant instance to be used without the global
control socket, so allow dump_monitor() to handle this case cleanly.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-18 16:01:41 +02:00
Jouni Malinen
970a23f665 tests: Make flush_scan_cache() more robust
It was possible for BSS entries on the scanned channel (2412 MHz) to be
left behind after flush_scan_cache() call. Use a less likely channel
2417 MHz as the default channel to scan. This will hopefully get rid of
most problematic BSS entries from previous test cases. For example,
ap_hs20_oen followed by ap_hs20_random_mac could fail due to
INTERWORKING_CONNECT seeing non-RSN scan result from the previous test
case.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-15 01:13:03 +02:00
Jouni Malinen
909f13cc52 tests: Move 'SET pmf 0' from reset() to test cases
This avoids one more cleanup step between most test cases by clearing
the default PMF behavior change only in case it was actually modified
during a test.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-14 02:28:03 +02:00
Jouni Malinen
be9f156200 tests: Move WPS_ER_STOP from reset() to test cases
This avoids one more cleanup step between most test cases by stopping ER
only in case it was actually used during a test.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-14 02:28:03 +02:00
Jouni Malinen
25057d9227 tests: P2P cross connection
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-11 15:18:11 +02:00
Jouni Malinen
7457c63538 tests: Additional P2P_FIND parameter coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-08 17:56:47 +02:00
Jouni Malinen
ceb767d501 tests: More coverage for WMM-AC
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-05 14:08:24 +02:00
Jouni Malinen
acc9a635c8 tests: EAP Re-authentication Protocol (ERP)
This tests RP EAP-Initiate/Re-auth-Start transmission, ERP key
derivation, and EAP-Initiate/Re-auth + EAP-Finish/Re-auth exchange and
rMSK derivation.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-04 12:16:29 +02:00
Jouni Malinen
243dcc4ae4 tests: Add a helper function for clearing scan cache
This makes it more convenient and consistent to clear the cached scan
results from cfg80211 and wpa_supplicant.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-01 12:20:53 +02:00
Jouni Malinen
ee3f9f3837 tests: Optimize autogo test cases by removing unnecessary scans
Keep full channel scans in autogo for test coverage, but use single
channel scan in all other autogo* test cases to remove unnecessary
waiting that does not add any test coverage. This removes more than one
minute from the total test execution time.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-28 23:02:29 +02:00
Jouni Malinen
e4d7b5134e tests: Move hessid and access_network_type reset to test case
This removes unnecessary reset() steps from between every test case.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-28 23:02:29 +02:00
Jouni Malinen
47dcb1186f tests: Move external_sim reset to test cases that change this
This removes unnecessary reset() step from between every test case.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-28 23:02:29 +02:00
Johannes Berg
6bb9d861f9 tests: Ignore status responses without =
There are valid status (and possibly status-driver) responses
that don't have a name=value format, ignore those in the test
framework parser.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-27 20:15:51 +02:00
Javier Lopez
68157c0674 tests: Add test_wpas_mesh test cases
This wpa_supplicant tests include basic tests for:

- Mesh scan
- Mesh group add/remove
- Mesh peer connected/disconnected
- Add/Set/Remove to test mesh mode network
- Open mesh connectivity test
- Secure mesh connectivity test
- no_auto_peer

Signed-off-by: Jason Mobarak <x@jason.mobarak.name>
[no_auto_peer test by: Javier Cardona <javier@cozybit.com>
Signed-off-by: Javier Lopez <jlopex@gmail.com>
2014-11-20 16:31:12 +02:00
Jouni Malinen
168d4b097c tests: WEP with non-zero key index
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-19 17:37:54 +02:00
Eliad Peller
7613345814 tests: Add wpa_supplicant WMM-AC test
Add basic wpa_supplicant tests for WMM-AC TSPEC addition/deletion.

Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
2014-11-16 21:40:57 +02:00
Jouni Malinen
eec0cc8da2 tests: Clear ignore_old_scan_res setting
This parameter was used in some of the NFC test cases to make scanning
more robust in case of changing AP configuration. However, the parameter
was not cleared anywhere, so it could have been left in use for other
test cases as well. To get more consistent behavior, clear the value
back to its default between test cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-15 12:56:02 +02:00
Jouni Malinen
5f797376f2 tests: Make RELOG command use global control interface
This allows RELOG to be used even if a wpa_supplicant process does not
have any interfaces configured.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-20 12:52:25 +03:00
Jouni Malinen
4823566ca7 tests: Add WpaSupplicant.wait_group_event()
This can be used to wait for events from a P2P group interface.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-19 22:27:37 +03:00
Jouni Malinen
f6420942cb tests: Add own_addr() for both Hostapd and WpaSupplicant classes
This makes it easier to use instances of control interfaces in common
code without having to separately address hostapd and wpa_supplicant
behavior differences.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-19 22:27:37 +03:00
Jouni Malinen
89f20842f6 tests: OpenSSL cipherlist configuration
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-12 11:59:04 +03:00
Jouni Malinen
b43ac5d5ab tests: P2P group formation with WSC_Done missing
This verifies that GO is able to complete group formation even if the
P2P Client does not send WSC_Done message (or that message is dropped
for any reason) in case the P2P Client completes 4-way handshake
successfully.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-10 18:40:57 +03:00
Jouni Malinen
816e3df972 tests: Random MAC address use
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-09-27 20:07:55 +03:00
Jouni Malinen
bbf20ca265 tests: Use TYPE=ONLY scan for scan_for_bss
This avoids unexpected connection attempts in cases a matching network
is enabled and there is no existing connection (e.g., when testing with
ENABLE_NETWORK no-connect option).

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-09-27 16:12:41 +03:00
Jouni Malinen
f1a36a53a5 tests: update_identifier in network block
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-07-02 15:51:20 +03:00
Haim Dreyfuss
5fe7a42601 tests: Add wpasupplicant get_mcc helper function
The function returns the number of concurrent channels supported by the
driver.

Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
2014-06-14 19:49:17 +03:00
Jouni Malinen
54c20c9b43 tests: Make discovery_group_client more robust
Allow three P2P_FIND attempts for discovering the GO on a non-social
channels since the single Probe Response frame can be missed easily
under heavy CPU load.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-15 18:38:11 +03:00
Jouni Malinen
655bc8bfd6 tests: Make FT test cases more robust
Scan explicitly for the AP that may be started during the test case
execution. This is needed to work around issues where under heavy CPU
load, the single active scan round may miss the delayed Probe Response
from the second AP. In addition, check for ROAM/FT_DS failures to be
able to report errors more clearly.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-15 16:56:59 +03:00
Jouni Malinen
841bed04de tests: Make HS 2.0 test cases more robust
Scan explicitly for the AP that may be started during the test case
execution. This is needed to work around issues where under heavy CPU
load, the single active scan round may miss the delayed Probe Response
from the second AP.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-15 16:56:49 +03:00
Jouni Malinen
c126cb4d1c tests: Make pmksa_cache_on_roam_back more robust
The single channel scan while associated to another AP and immediately
after starting the second AP can miss the Probe Response frame
especially under heavy CPU load. Avoid false error reports by allowing
multiple scan rounds to be performed. wpas_ctrl_bssid_filter is also
modified to take into account different get_bss() behavior.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-15 16:56:45 +03:00
Jouni Malinen
521b7e7925 tests: Verify global control interface before starting each test
This allows control interface issues to be caught in a bit more readable
way in the debug logs. In addition, dump pending monitor socket
information more frequently and within each test case in the log files
to make the output clearer and less likely to go over the socket buffer
limit.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-04-29 15:20:23 +03:00
Jouni Malinen
26cf800d11 tests: id_str in network configuration
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-29 12:52:10 +03:00
Jouni Malinen
bd6bb3e37b tests: HT 20/40 co-ex functionality during BSS lifetime
Verify that AP acts on 40 MHz intolerant STA association/disassociation
and on 20/40 co-ex report indicating 40 MHz intolerant AP showed up and
removed.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-04-29 12:52:10 +03:00
Jouni Malinen
117caa4a0c tests: wpa_supplicant configuration file reading/writing
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-16 01:45:13 +03:00
Jouni Malinen
bdc4476476 tests: P2P group formation using parameters from persistent group
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-15 01:16:32 +03:00
Jouni Malinen
08429720a7 tests: HT capability overrides
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-13 10:26:53 +03:00
Jouni Malinen
5070b14a51 tests: p2p_find with progressive scan
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-13 10:26:53 +03:00
Jouni Malinen
543f9f7ead tests: auto_interworking=1
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-13 10:26:53 +03:00
Jouni Malinen
b3ec107c8b tests: BSS_EXPIRE_COUNT/AGE
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-13 10:26:52 +03:00
Jouni Malinen
31ec9faf47 tests: bgscan test cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-13 10:26:52 +03:00
Jouni Malinen
f44c45ac7f tests: Verify STATUS-WPS passphrase on GO
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-07 00:56:04 +03:00
Jouni Malinen
861671b6ca tests: Use random WPS PIN
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-07 00:56:04 +03:00
Jouni Malinen
538da4f4d2 tests: TDLS setup failure due to BSSID mismatch
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-05 20:42:12 +03:00
Jouni Malinen
ca4fd18290 tests: Speed up IBSS test using single channel scan on SELECT_NETWORK
This removes unnecessary waits and adds test coverage for SELECT_NETWORK
freq parameter.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-04 23:13:49 +03:00