Commit graph

43 commits

Author SHA1 Message Date
Jonathan Afek
9fd6804d61 tests: Mark 525 tests as remote compatible
After successfully passing the 525 tests on a remote setup mark the
tests as remote compatible.

Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
2016-06-27 21:47:37 +03:00
Andrei Otcheretianski
597cbc0075 tests: Fix persistent_group_peer_dropped tests
Use the global control interface to remove P2P network blocks, to
support cases when a dedicated P2P Device interface is used.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2016-04-25 00:06:20 +03:00
Avraham Stern
5e65346ade tests: persistent_group_profile_add to support P2P Device interface
Modify the persistent_group_profile_add test to support configurations
that use a dedicated P2P Device interface by sending the ADD_NETWORK and
SET_NETWORK commands on the global control interface and specifying the
P2P Device interface name.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2016-04-24 23:45:16 +03:00
Jouni Malinen
601e55726c tests: Add P2P invitation coverage during p2p_find
The new persistent_group_peer_dropped3 test case is similar to
persistent_group_peer_dropped with the difference being in the
responding device (the one from which the persistent group information
is dropped) is not issued a separate P2P_LISTEN command and instead, a
single P2P_FIND is used through the exchange to verify that this
operation does not get stopped unexpectedly. This is a regression test
case to verify that P2P_PENDING_INVITATION_RESPONSE case ends up calling
p2p_check_after_scan_tx_continuation() in non-success case. It should be
noted that this is dependent on timing: Action frame TX request needs to
occur during the P2P_FIND Search phase (scan). As such, not every
execution of this test case will hit the previous issue sequence, but
that should be hit every now and then.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-04-07 21:10:10 +03:00
Jouni Malinen
d4c2860b6b tests: P2P persistent group re-invocation with peer having dropped info
This verifies that the persistent group information gets dropped based
on peer response (unknown group) and that a new group formation can be
completed after such invitation failure.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-02-02 13:27:32 +02:00
Jouni Malinen
cf3a9d8f06 tests: Clear p2p_add_cli_chan explicitly in test cases where it is used
This parameter is used only in couple of test cases and there is no need
to maintain the code to reset it in WpaSupplicant::reset().

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-28 17:33:17 +02:00
Jouni Malinen
b134397b11 tests: P2P persistent group formation, re-invocation, and cancel
Verify that P2P_CANCEL gets rejected on fully re-invoked persistent
group. This did not work properly before the last couple of commits and
before this week, the P2P_CANCEL on a separate group interface in P2p
Client role could result in use of freed memory and process termination.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-04 23:15:11 +02:00
Jouni Malinen
9cb3413090 tests: Move P2P helper functions to a separate file
This makes it easier to import these into the P2P test scripts.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-25 19:37:17 +02:00
Jouni Malinen
72f460a27b tests: Support non-social oper channel in persistent_group_per_sta_psk
This allows driver-based preference list to override default operating
channel selection mechanism by using a non-social P2P find if needed.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-31 15:24:45 +03:00
Ben Rosenfeld
0208e8329d tests: Use global interface for "P2P_SET"
Setting P2P per_sta_psk should be done using the global control
interface.

Signed-off-by: Ben Rosenfeld <ben.rosenfeld@intel.com>
2015-06-19 10:37:08 +03:00
Jouni Malinen
1a5041791e tests: Create a P2P persistent group with ADD_NETWORK
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-06-11 00:02:05 +03:00
Jouni Malinen
be43588a3c tests: P2P group re-invocation with invitation response getting lost
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-05-29 13:34:22 +03:00
Jouni Malinen
38ad1ea317 tests: Fix persistent_group_per_sta_psk for P2P Device case
The dev[1] <--> dev[2] data connectivity test was using incorrect
function. dev[2] is also using a P2P group and as such, can have a
different group interface.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-05-08 18:33:20 +03:00
Jouni Malinen
f033200e94 tests: Add P2P Device support for persistent_group
The network operations need to use the global control interface to be
performed on the interface that stores the network profiles for
persistent groups.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-05-08 18:33:11 +03:00
Ben Rosenfeld
622ef15b77 tests: Update group_ifname after group start
After P2P-GROUP-STARTED event, use group_form_result in order to update
the group_ifname for the device. This is needed when using P2P Device
for managing P2P operations which results in a separate group interface
being used.

Signed-off-by: Ben Rosenfeld <ben.rosenfeld@intel.com>
2015-05-08 18:32:34 +03:00
Ben Rosenfeld
9766d403a6 tests: Change persistent_go_client_list to use global interface
Signed-off-by: Ben Rosenfeld <ben.rosenfeld@intel.com>
2015-05-08 18:30:45 +03:00
Ben Rosenfeld
85ef1f4345 tests: Use global interface in persistent_group_invite_removed_client
When removing a persistent P2P group, global interface needs to be used.

Signed-off-by: Ben Rosenfeld <ben.rosenfeld@intel.com>
2015-05-08 18:29:29 +03:00
Ben Rosenfeld
8e751cfa05 tests: Change list_networks() to use global interface with P2P
list_networks() always used the wlanX control interface to query for the
current list of networks. However, when a dedicated P2P Device is used,
the global control interface should be used when checking persistent
group network profiles.

Fix this by adding an optional parameter indicating that the P2P
networks are requested, and in such a case use the global control
interface.

In addition update test_p2p_persistent to use the argument when needed.

Signed-off-by: Ben Rosenfeld <ben.rosenfeld@intel.com>
2015-05-08 18:29:03 +03:00
Ben Rosenfeld
d7e2d79b1a tests: Change persistent_group_per_sta_psk to use global interface
This is required for cases that a dedicated P2P Device interface
is used and then the event will happen on the global interface.

Signed-off-by: Ben Rosenfeld <ben.rosenfeld@intel.com>
2015-05-08 18:27:25 +03:00
Ben Rosenfeld
cbeab59c9f tests: Change test_p2p_persistent to use the global control interface
Send request to set persistent_reconnect on the global control
interface so it would also work when using a dedicated P2P Device
interface.

Signed-off-by: Ben Rosenfeld <ben.rosenfeld@intel.com>
2015-05-08 18:27:04 +03:00
Jouni Malinen
c62438b822 tests: Optimize p2p_persistent test cases
Number of unnecessary scan iterations can removed from these test cases
by specifying a single channel.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-11 15:18:11 +02:00
Jouni Malinen
c93b6706d2 tests: Additional P2P_REMOVE_CLIENT coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-11 15:18:11 +02:00
Jouni Malinen
bccbd51a80 tests: Additional P2P_GROUP_ADD coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-09 23:03:27 +02:00
Jouni Malinen
e22335e5db tests: Invalid P2P_INVITE parameters
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-08 21:15:26 +02:00
Jouni Malinen
9c2d2378ba tests: P2P re-invocation with p2p_add_cli_chan=1
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-18 17:00:57 +03:00
Jouni Malinen
06f94fd0e1 tests: Increase P2P persistent group with per-STA PSK coverage
Remove and re-start the persistent group manually to increase test
coverage to include the case of re-configuring the PSK list entries from
a stored persistent group.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-09-28 18:09:53 +03:00
Jouni Malinen
95cf24abcd tests: More protocol testing coverage for P2P invitation messages
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-05-29 16:46:59 +03:00
Jouni Malinen
5e5818458f tests: Persistent group invitation while GO already running
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-05-27 13:53:01 +03:00
Jouni Malinen
84d746c8dd tests: P2P persistent group during concurrent operation
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-05-27 13:53:00 +03:00
Jouni Malinen
2d68cfaaec tests: Persistent P2P group re-invocation without persistent reconnect
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-05-27 13:53:00 +03:00
Jouni Malinen
edb69bd622 tests: SELECT/ENABLE/DISABLE/REMOVE_NETWORK failure cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-29 12:52:10 +03:00
Jouni Malinen
bdc4476476 tests: P2P group formation using parameters from persistent group
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-15 01:16:32 +03:00
Jouni Malinen
ed634ef6b4 tests: P2P GO removing persistent client based on invitation result
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-13 10:26:53 +03:00
Jouni Malinen
406739c499 tests: P2P persistent group re-invocation with empty BSS table
This verifies P2P Client scanning behavior during group re-invocation in
a case where old scan results are not available to allow the scan to be
skipped completely.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-25 15:09:34 +02:00
Jouni Malinen
39f1cac57e tests: Persistent group formation with reverse roles
This increase test coverage a bit for the Persistent group flag in GO
Negotiation Response.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-05 22:40:28 +02:00
Jouni Malinen
5be9dcbb86 tests: Remove unnecessary interpreter line from most python files
Only run-tests.py is actually executed, so there is no need to specify
the interpreter in all the helper files and test script files.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-21 20:21:53 +02:00
Jouni Malinen
675b1f891b tests: p2p_client_list on persistent GO
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:12 +02:00
Jouni Malinen
01370f49a6 tests: Verify that re-invoked P2P group is identified as persistent
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-21 11:39:12 +02:00
Jouni Malinen
c9aa430896 tests: Split run-tests.py logger info into per test case files
The run-tests.py -l argument does not take an argument value anymore.
Instead, debug output is directed to a separate file <test>.log for each
test case.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-31 12:51:08 +02:00
Jouni Malinen
e201e5ab61 tests: Add P2P channel selection test cases for group re-invocation
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-10-26 23:50:11 +03:00
Jouni Malinen
18b12b56c1 tests: Add a test case for invitation after client removal
test_persistent_group_invite_removed_client verifies that a client
that is removed from a group can rejoin based on new invitation.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-01 21:53:03 +03:00
Jouni Malinen
2c914e2464 tests: Use a helper function for waiting session termination
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-01 21:35:10 +03:00
Jouni Malinen
451afb4fd3 tests: Add test cases for persistent P2P groups
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-01 21:35:10 +03:00