Commit graph

316 commits

Author SHA1 Message Date
Kevin Lund
cff545720e wpa_supplicant: Clear blacklist when SSID configs change
If the stored configurations for an SSID have changed, we can no longer
trust the current blacklist state of that SSID, since the updated
configs could change the behavior of the network. E.g., the BSS could be
blacklisted due to a bad password, and the config could be updated to
store the correct password. In this case, keeping the BSS in the
blacklist will prevent the user from connecting to the BSS after the
correct password has been updated.

Add the value was_changed_recently to the wpa_ssid struct. Update this
value every time a config is changed through wpa_set_config(). Check
this value in wpa_blacklist_get() to clear the blacklist whenever the
configs of current_ssid have changed.

This solution was chosen over simply clearing the blacklist whenever
configs change because the user should be able to change configs on an
inactive SSID without affecting the blacklist for the currently active
SSID. This way, the blacklist won't be cleared until the user attempts
to connect to the inactive network again. Furthermore, the blacklist is
stored per-BSSID while configs are stored per-SSID, so we don't have the
option to just clear out certain blacklist entries that would be
affected by the configs.

Finally, the function wpa_supplicant_reload_configuration() causes the
configs to be reloaded from scratch, so after a call to this function
all bets are off as to the relevance of our current blacklist state.
Thus, we clear the entire blacklist within this function.

Signed-off-by: Kevin Lund <kglund@google.com>
Signed-off-by: Brian Norris <briannorris@chromium.org>
2020-10-10 18:34:59 +03:00
Yogesh Kulkarni
6d6310701b Fix STA mode default TXOP Limit values for AC_VI and AC_VO
commit f4e3860f ("Fix AP mode default TXOP Limit values for AC_VI
and AC_VO") corrects the default values of txop_limit from 93/46
to 94/47 for AP. STA would also need the same change.

Signed-off-by: Yogesh Kulkarni <yogesh.kulkarni@nxp.com>
Signed-off-by: Cathy Luo <xiaohua.luo@nxp.com>
Signed-off-by: Ganapathi Bhat <ganapathi.bhat@nxp.com>
2020-10-10 17:04:27 +03:00
Matthew Wang
4756ecabcf Allow bgscan parameters to be reconfigured
Teach wpa_supplicant to {de,}initialize bgscans when bgscan parameters
are set after initial connection.

Signed-off-by: Matthew Wang <matthewmwang@chromium.org>
2020-10-09 16:50:36 +03:00
Matthew Wang
922fa09972 Global parser functions to return 1 when property unchanged
Currently, wpa_config_set(), the function that sets wpa_supplicant
per-network properties, returns 1 when a property it attempts to set is
unchanged. Its global parallel, wpa_config_process_global(), doesn't do
this even though much of the code is very similar. Change this, and
several of the parser functions, to resemble the per-network parser and
setter functions.

Signed-off-by: Matthew Wang <matthewmwang@chromium.org>
2020-10-09 16:50:36 +03:00
Sreeramya Soratkal
14318ccff5 P2P: Add configuration support to disable P2P in 6 GHz band
Add a new configuration parameter p2p_6ghz_disable=1 to disable P2P
operation in the 6 GHz band. This avoids additional delays caused by
scanning 6 GHz channels in p2p_find and p2p_join operations in the cases
where user doesn't want P2P connection in the 6 GHz band.

Signed-off-by: Sreeramya Soratkal <ssramya@codeaurora.org>
2020-10-08 23:29:22 +03:00
Subrat Dash
790026c3da Allow TX queue parameters to be configured for wpa_supplicant AP/P2P GO
Allow user to configure the TX queue parameters through the
wpa_supplicant configuration file similarly to the way these can be set
in hostapd.

Parse the tx_queue_* parameters in the wpa_supplicant configuration file
and update the TX queue configuration to the AP/P2P GO interface in the
function wpa_supplicant_create_ap().

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-09 00:29:42 +03:00
Jouni Malinen
9ad010c290 SAE-PK: Allow automatic SAE-PK to be disabled
This replaces the previously used sae_pk_only configuration parameter
with a more generic sae_pk that can be used to specify how SAE-PK is
negotiated. The default behavior (sae_pk=0) is to automatically
negotiate SAE-PK whenever the AP supports it and the password is in
appropriate format. sae_pk=1 allows only SAE-PK to be used and sae_pk=2
disables SAE-PK completely.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-07 11:55:16 +03:00
Jouni Malinen
1c846d647e SAE-PK: Allow SAE authentication without PK to be disabled
The new wpa_supplicant network profile parameter sae_pk_only=1 can now
be used to disable use of SAE authentication without SAE-PK.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-06 15:18:13 +03:00
P Praneesh
7c8f540ee0 wpa_supplicant: Add HE override support
Add HE override support under the build parameter CONFIG_HE_OVERRIDES=y.
The disable_he=1 network profile parameter can be used to disable HE.
This requires a fallback to VHT on the 5 GHz band and to HT on the 2.4
GHz band.

There is no nl80211 support for configuring the driver to disable HE, so
for now, this applies only to IBSS and mesh cases.

Signed-off-by: P Praneesh <ppranees@codeaurora.org>
2020-03-30 12:55:01 +03:00
Jouni Malinen
5058f771d9 DPP2: Allow station to require or not allow PFS
The new wpa_supplicant network profile parameter dpp_pfs can be used to
specify how PFS is applied to associations. The default behavior
(dpp_pfs=0) remains same as it was previously, i.e., try to use PFS if
the AP supports it. PFS use can now be required (dpp_pfs=1) or disabled
(dpp_pfs=2).

This is also working around an interoperability issue of DPP R2 STA with
certain hostapd builds that included both OWE and DPP functionality.
That issue was introduced by commit 09368515d1 ("OWE: Process
Diffie-Hellman Parameter element in AP mode") and removed by commit
16a4e931f0 ("OWE: Allow Diffie-Hellman Parameter element to be
included with DPP"). hostapd builds between those two commits would
reject DPP association attempt with PFS. The new wpa_supplicant default
(dpp_pfs=0) behavior is to automatically try to connect again with PFS
disabled if that happens.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-03-28 17:23:22 +02:00
Jouni Malinen
96686e637c wpa_supplicant AP mode configuration for Transition Disable KDE
Allow AP mode network profile in wpa_supplicant to be configured to
advertise Transition Disable DKE.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-03-26 00:18:06 +02:00
Alexander Wetzel
b17b7a8e53 STA: Support Extended Key ID
Support Extended Key ID in wpa_supplicant according to
IEEE Std 802.11-2016 for infrastructure (AP) associations.

Extended Key ID allows to rekey pairwise keys without the otherwise
unavoidable MPDU losses on a busy link. The standard is fully backward
compatible, allowing STAs to also connect to APs not supporting it.

Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
2020-03-23 11:47:31 +02:00
Jouni Malinen
d2d16e3100 Use size_t instead of int or unsigned int for configuration items
While int and unsigned int are not going overflow in practice as 32-bit
values, these could at least in theory hit an integer overflow with
16-bit int. Use size_t to avoid such potential issue cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-03-22 18:50:04 +02:00
Jouni Malinen
200c7693c9 Make WEP functionality an optional build parameter
WEP should not be used for anything anymore. As a step towards removing
it completely, move all WEP related functionality to be within
CONFIG_WEP blocks. This will be included in builds only if CONFIG_WEP=y
is explicitly set in build configuration.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-02-29 17:45:25 +02:00
Alexander Wetzel
1f90a49d02 STA: Allow PTK rekeying without Ext KeyID to be disabled as a workaround
Rekeying a pairwise key using only keyid 0 (PTK0 rekey) has many broken
implementations and should be avoided when using or interacting with
one. The effects can be triggered by either end of the connection and
range from hardly noticeable disconnects over long connection freezes up
to leaking clear text MPDUs.

To allow affected users to mitigate the issues, add a new configuration
option "wpa_deny_ptk0_rekey" to replace all PTK0 rekeys with fast
reconnects.

Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
2020-02-23 13:05:19 +02:00
Jouni Malinen
ecbf59e693 wpa_supplicant configuration for Beacon protection
Add a new wpa_supplicant network profile configuration parameter
beacon_prot=<0/1> to allow Beacon protection to be enabled.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-02-18 00:18:47 +02:00
Jouni Malinen
641d79f165 SAE: Special test mode sae_pwe=3 for looping with password identifier
The new sae_pwe=3 mode can be used to test non-compliant behavior with
SAE Password Identifiers. This can be used to force use of
hunting-and-pecking loop for PWE derivation when Password Identifier is
used. This is not allowed by the standard and as such, this
functionality is aimed at compliance testing.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-02-10 05:13:13 +02:00
Jouni Malinen
8b138d2826 OWE: PTK derivation workaround in STA mode
Initial OWE implementation used SHA256 when deriving the PTK for all OWE
groups. This was supposed to change to SHA384 for group 20 and SHA512
for group 21. The new owe_ptk_workaround=1 network parameter can be used
to enable older behavior mainly for testing purposes. There is no impact
to group 19 behavior, but if enabled, this will make group 20 and 21
cases use SHA256-based PTK derivation which will not work with the
updated OWE implementation on the AP side.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-24 00:47:41 +02:00
Ahmad Masri
996662250d P2P: Add support for EDMG channels
This allows a P2P connection over P802.11ay EDMG channels to achieve the
highest link speed that the standard allows for channel bonding (CB) up
to CB4.

Let each P2P peer add its EDMG channels to the Supported Channels IE
advertised in P2P GO negotiation. Give EDMG channels priority when peers
negotiate for operating channel.

User may add 'edmg' parameter to p2p_connect, p2p_add_group, and
p2p_invite commands to prefer an EDMG channel for the P2P link. User may
also set p2p_go_edmg=1 in wpa_supplicant configuration file to prefer
EDMG.

When EDMG is used, P2P will try to find the highest channel bonding
supported channel that matches the frequency parameter, if the devices
do not support EDMG, the P2P connection will use a legacy (1-6) 60 GHz
channel.

Signed-off-by: Ahmad Masri <amasri@codeaurora.org>
2019-12-20 00:13:08 +02:00
Jouni Malinen
05a2fb0d11 SAE: Derive H2E PT in STA before connection
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-15 15:39:22 +03:00
Jouni Malinen
85e64e634d SAE: Add sae_pwe configuration parameter for wpa_supplicant
This parameter can be used to specify which PWE derivation mechanism(s)
is enabled. This commit is only introducing the new parameter; actual
use of it will be address in separate commits.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-15 15:39:22 +03:00
Alexei Avshalom Lazar
e8ff22f471 wpa_supplicant: Add EDMG channel configuration parameters
Add two new configuration parameters for wpa_supplicant:
enable_edmg: Enable EDMG capability for STA/AP mode
edmg_channel: Configure channel bonding. In AP mode it defines the EDMG
channel to start the AP on. In STA mode it defines the EDMG channel to
use for connection.

Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org>
2019-10-07 16:50:06 +03:00
Jouni Malinen
5a5639b068 DPP: Allow name and mudurl to be configured for Config Request
The new hostapd and wpa_supplicant configuration parameters dpp_name and
dpp_mud_url can now be used to set a specific name and MUD URL for the
Enrollee to use in the Configuration Request. dpp_name replaces the
previously hardcoded "Test" string (which is still the default if an
explicit configuration entry is not included). dpp_mud_url can
optionally be used to add a MUD URL to describe the Enrollee device.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-09-19 00:21:47 +03:00
Sujay Patwardhan
21dc1627f6 wpa_supplicant: Don't return an error when successfully parsing WMM rules
The config file parser previously would fall through into an error if
CONFIG_AP is defined and it hit a wmm_ac_* rule with a valid value. Add
a return to prevent incorrectly printing an error message and returning
a non-zero exit code.

Signed-off-by: Sujay Patwardhan <sujay@eero.com>
2019-09-13 16:35:16 +03:00
Alexei Avshalom Lazar
dc6c3be4e2 wpa_supplicant: Add support for 60 GHz band channels 5 and 6
The previous support in the 60 GHz band was for channels 1-4.
Add support for channels 5 and 6.

Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org>
2019-09-13 16:14:17 +03:00
Jouni Malinen
7d2ed8bae8 Remove CONFIG_IEEE80211W build parameter
Hardcode this to be defined and remove the separate build options for
PMF since this functionality is needed with large number of newer
protocol extensions and is also something that should be enabled in all
WPA2/WPA3 networks.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-09-08 17:33:40 +03:00
Jouni Malinen
6816182461 EAP-TEAP peer: Add support for machine credentials using certificates
This allows EAP-TLS to be used within an EAP-TEAP tunnel when there is
an explicit request for machine credentials. The network profile
parameters are otherwise same as the Phase 1 parameters, but each one
uses a "machine_" prefix for the parameter name.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-09-01 17:19:43 +03:00
Jouni Malinen
043de65f1c EAP peer config: Move ocsp param to phase1/phase2
OCSP configuration is applicable to each instance of TLS-based
authentication and as such, the configuration might need to be different
for Phase 1 and Phase 2. Move ocsp into struct eap_peer_cert_config and
add a separate ocsp2 network profile parameter to set this for Phase 2.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-09-01 17:19:35 +03:00
Jouni Malinen
b99c4cadb7 EAP peer: Move certificate configuration params into shared struct
These parameters for certificate authentication are identical for the
Phase 1 (EAP-TLS alone) and Phase 2 (EAP-TLS inside a TLS tunnel).
Furthermore, yet another copy would be needed to support separate
machine credential in Phase 2. Clean this up by moving the shared
parameters into a separate data struct that can then be used for each
need without having to define separate struct members for each use.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-09-01 17:19:31 +03:00
Jouni Malinen
c724a0a16c EAP peer: Add a concept of a separate machine credential
This is an initial step in adding support for configuring separate user
and machine credentials. The new wpa_supplicant network profile
parameters machine_identity and machine_password are similar to the
existing identity and password, but explicitly assigned for the purpose
of machine authentication.

This commit alone does not change actual EAP peer method behavior as
separate commits are needed to determine when there is an explicit
request for machine authentication. Furthermore, this is only addressing
the username/password credential type, i.e., additional changes
following this design approach will be needed for certificate
credentials.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-08-20 13:24:14 +03:00
Jouni Malinen
d2b2083843 SAE: Allow PMKID to be added into Association Request frame following SAE
IEEE Std 802.11-2016 does not require this behavior from a SAE STA, but
it is not disallowed either, so it is useful to have an option to
identify the derived PMKSA in the immediately following Association
Request frames. This is disabled by default (i.e., no change to previous
behavior) and can be enabled with a global wpa_supplicant configuration
parameter sae_pmkid_in_assoc=1.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-08-14 17:49:23 +03:00
Ankita Bajaj
ef59f98729 WNM: Provide option to disable/enable BTM support in STA
Add support to disable/enable BTM support using configuration and
wpa_cli command. This is useful mainly for testing purposes.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-06-14 23:10:51 +03:00
John Crispin
464dcfd030 HE: Remove VHT_ prefix from CHANWITDH_* define
The bandwidth values are shared between VHT and HE mode so remove the
VHT specific prefix.

Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com>
Signed-off-by: John Crispin <john@phrozen.org>
2019-05-27 16:27:49 +03:00
Jouni Malinen
9083ef1355 FT: Allow PMKSA caching to be enabled with FT-EAP
The new wpa_supplicant network profile configuration parameter
ft_eap_pmksa_caching=1 can be used to enable use of PMKSA caching with
FT-EAP for FT initial mobility domain association. This is still
disabled by default (i.e., maintaining previous behavior) to avoid
likely interoperability issues.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-28 16:01:45 +03:00
Jared Bents
841205a1ce OpenSSL: Add 'check_cert_subject' support for TLS server
This patch added 'check_cert_subject' support to match the value of
every field against the DN of the subject in the client certificate. If
the values do not match, the certificate verification will fail and will
reject the user.

This option allows hostapd to match every individual field in the right
order, also allow '*' character as a wildcard (e.g OU=Development*).

Note: hostapd will match string up to 'wildcard' against the DN of the
subject in the client certificate for every individual field.

Signed-off-by: Paresh Chaudhary <paresh.chaudhary@rockwellcollins.com>
Signed-off-by: Jared Bents <jared.bents@rockwellcollins.com>
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-03-11 14:09:45 +02:00
Jouni Malinen
339dc8bd6b WPS: Allow SAE configuration to be added automatically for PSK
The new wpa_supplicant configuration parameter wps_cred_add_sae=1 can be
used to request wpa_supplicant to add SAE configuration whenever WPS is
used to provision WPA2-PSK credentials and the credential includes a
passphrase (instead of PSK). This can be used to enable WPA3-Personal
transition mode with both SAE and PSK enabled and also with PMF enabled.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-03-06 21:52:49 +02:00
Jimmy Chen
a95906f938 P2P: support random interface address
To enhance privacy, generate a random interface for each group.

There are two configurations are introduced:
* p2p_interface_random_mac_addr
  enable interface random MAC address feature, default disable.

Signed-off-by: Jimmy Chen <jimmycmchen@google.com>
2019-01-12 17:58:30 +02:00
Jimmy Chen
9359cc8483 P2P: Support random device address
To enhance privacy, generate a random device address for P2P interface.
If there is no saved persistent group, it generate a new random MAC
address on bringing up p2p0. If there is saved persistent group, it will
use last MAC address to avoid breaking group reinvoke behavior.

There are two configurations are introduced:
* p2p_device_random_mac_addr
  enable device random MAC address feature, default disable.
* p2p_device_persistent_mac_addr
  store last used random MAC address.

Signed-off-by: Jimmy Chen <jimmycmchen@google.com>
2019-01-12 17:55:42 +02:00
Peng Xu
5a3319ab1b P2P: Add 802.11ax support for P2P GO
An optional parameter "he" is added to p2p_connect, p2p_group_add, and
p2p_invite to enable 11ax HE support. The new p2p_go_he=1 configuration
parameter can be used to request this to be enabled by default.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-01-12 13:09:39 +02:00
Peter Oh
806db174fd mesh: Add VHT_CHANWIDTH_USE_HT to max_oper_chwidth
Channel width in VHT mode refers HT capability when the width goes down
to below 80 MHz, hence add checking HT channel width to its max
operation channel width. So that mesh has capability to select bandwidth
below 80 MHz.

Signed-off-by: Peter Oh <peter.oh@bowerswilkins.com>
2019-01-06 23:43:40 +02:00
Jouni Malinen
871439b5d5 mka: Allow 256-bit CAK to be configured for PSK mode
This allows 256-bit CAK to be used as the root key in the MKA key
hierarchy.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-12-26 16:44:58 +02:00
Andrey Kartashev
e49b78c0d5 mka: Allow configuration of MACsec replay protection
Add new configuration parameters macsec_replay_protect and
macsec_replay_window to allow user to set up MACsec replay protection
feature. Note that according to IEEE Std 802.1X-2010 replay protection
and delay protection are different features: replay protection is
related only to SecY and does not appear on MKA level while delay
protection is something that KaY can use to manage SecY state.

Signed-off-by: Andrey Kartashev <andrey.kartashev@afconsult.com>
2018-12-26 16:42:25 +02:00
michael-dev
b678ed1efc macsec: Make pre-shared CKN variable length
IEEE Std 802.1X-2010, 9.3.1 defines following restrictions for CKN:

"MKA places no restriction on the format of the CKN, save that it comprise
an integral number of octets, between 1 and 32 (inclusive), and that all
potential members of the CA use the same CKN. No further constraints are
placed on the CKNs used with PSKs, ..."

Hence do not require a 32 octet long CKN but instead allow a shorter CKN
to be configured.

This fixes interoperability with some Aruba switches, that do not accept
a 32 octet long CKN (only support shorter ones).

Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
2018-12-25 17:29:15 +02:00
Sergey Matyukevich
cdeea70f59 wpa_supplicant: Allow overriding HT STBC capabilities
Allow user to override STBC configuration for Rx and Tx spatial streams.
Add new configuration options to test for HT capability overrides.

Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com>
2018-12-23 17:25:11 +02:00
Venkateswara Naralasetty
5abc7823bd wpa_supplicant: Add Multi-AP backhaul STA support
Advertise vendor specific Multi-AP IE in (Re)Association Request frames
and process Multi-AP IE from (Re)Association Response frames if the user
enables Multi-AP fuctionality. If the (Re)Association Response frame
does not contain the Multi-AP IE, disassociate.

This adds a new configuration parameter 'multi_ap_backhaul_sta' to
enable/disable Multi-AP functionality.

Enable 4-address mode after association (if the Association Response
frame contains the Multi-AP IE). Also enable the bridge in that case.
This is necessary because wpa_supplicant only enables the bridge in
wpa_drv_if_add(), which only gets called when an interface is added
through the control interface, not when it is configured from the
command line.

Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2018-12-20 12:10:31 +02:00
Mathy Vanhoef
ce6829c284 OCV: Add wpa_supplicant config parameter
Add wpa_supplicant network profile parameter ocv to disable or enable
Operating Channel Verification (OCV) support.

Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@cs.kuleuven.be>
2018-12-16 20:31:21 +02:00
Jouni Malinen
06c00e6d93 OWE: Fix OWE network profile saving
key_mgmt=OWE did not have a config parameter writer and wpa_supplicant
was unable to save such a network profile correctly. Fix this by adding
the needed parameter writer.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-12-08 16:27:26 +02:00
Damodaran, Rohit (Contractor)
ad6a92472d DPP: Support DPP key_mgmt saving to wpa_supplicant configuration
In the existing code, there was no "DPP" string available to the DPP key
management type for configuration parser of wpa supplicant. When the
configuration is saved, the key management string was left out from the
config file. Fix this by adding support for writing key_mgmt=DPP option.

Signed-off-by: Rohit Damodaran <Rohit_Damodaran@comcast.com>
2018-12-08 16:17:48 +02:00
Jouni Malinen
d514b50265 WNM: Collocated Interference Reporting
Add support for negotiating WNM Collocated Interference Reporting. This
allows hostapd to request associated STAs to report their collocated
interference information and wpa_supplicant to process such request and
reporting. The actual values (Collocated Interference Report Elements)
are out of scope of hostapd and wpa_supplicant, i.e., external
components are expected to generated and process these.

For hostapd/AP, this mechanism is enabled by setting
coloc_intf_reporting=1 in configuration. STAs are requested to perform
reporting with "COLOC_INTF_REQ <addr> <Automatic Report Enabled> <Report
Timeout>" control interface command. The received reports are indicated
as control interface events "COLOC-INTF-REPORT <addr> <dialog token>
<hexdump of report elements>".

For wpa_supplicant/STA, this mechanism is enabled by setting
coloc_intf_reporting=1 in configuration and setting Collocated
Interference Report Elements as a hexdump with "SET coloc_intf_elems
<hexdump>" control interface command. The hexdump can contain one or
more Collocated Interference Report Elements (each including the
information element header). For additional testing purposes, received
requests are reported with "COLOC-INTF-REQ <dialog token> <automatic
report enabled> <report timeout>" control interface events and
unsolicited reports can be sent with "COLOC_INTF_REPORT <hexdump>".

This commit adds support for reporting changes in the collocated
interference (Automatic Report Enabled == 1 and partial 3), but not for
periodic reports (2 and other part of 3).

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-10-30 14:07:51 +02:00
Andrei Otcheretianski
ac0ac1ddfd wpa_supplicant: Fix buffer overflow in roaming_consortiums
When configuring more than 36 roaming consortiums with SET_CRED, the
stack is smashed. Fix that by correctly verifying the
num_roaming_consortiums.

Fixes: 909a948b ("HS 2.0: Add a new cred block parameter roaming_consortiums")
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2018-10-14 20:47:35 +03:00