Commit graph

6924 commits

Author SHA1 Message Date
Jouni Malinen
24b06511e2 EAP-SAKE server: Fix memory freeing on error path
Allocated struct wpabuf was freed with incorrect freeing function. Fix
this by using the appropriate function.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-04-19 16:44:38 +03:00
Jouni Malinen
b583ed38df FT: Derive PTK properly for rekeying with FT protocol
Do not try to derive a PMK-R0 and PMK-R1 again for the case where an
association was started with FT protocol and PTK is rekeyed using 4-way
handshake. Instead, use the previously derived PMK-R1 to allow a new PTK
to be derived.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-19 11:45:13 +03:00
Jouni Malinen
fb1dee221b FT: Do not add bogus PMKID in msg 1/4 for FT protocol PTK rekeying
Do not try to derive a PMKID for EAPOL-key msg 1/4 when going through
4-way handshake to rekey PTK during an association that was started
through FT protocol.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-19 01:12:30 +03:00
Jouni Malinen
8a576f5ea5 FT: Maintain PMK-R1 for a connected STA
This is needed to allow PTK rekeying to be performed through 4-way
handshake in an association started through FT protocol.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-19 01:12:30 +03:00
Jouni Malinen
09ab81b9e8 WPA: Clear authenticator keys for a STA on deinit/disconnection
Do not leave keys in heap memory after they are no longer needed.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-19 01:12:30 +03:00
Jouni Malinen
f006c13c14 WPA: Stop WPA statement on STA disassociation
This is needed to avoid leaving some timers (e.g., for PTK rekeying)
running afrer a STA has disassociated.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-19 01:12:29 +03:00
Jouni Malinen
d178ab0d57 FT: Start PTK rekey timer on FT protocol completion
This is needed to trigger PTK rekeying properly for associations started
with FT protocol.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-19 01:12:29 +03:00
Jouni Malinen
267c366f38 FT: Remove unused pmk argument from wpa_auth_derive_ptk_ft()
FT rules for PTK derivation do not use PMK. Remove the unused argument
to the PTK derivation function.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-19 01:05:47 +03:00
Jouni Malinen
0a1a82db92 FT: Allow 4-way handshake for PTK rekeying to continue without PMK/PMKID
There is no PMK/PMKID when going through 4-way handshake during an
association started with FT protocol, so need to allow the operation to
proceed even if there is no selected PMKSA cache entry in place.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-19 01:05:41 +03:00
Jouni Malinen
a40bd06e9b FILS: Fix PTK rekeying
The PMK and PMKID information from FILS ERP and FILS PMKSA caching needs
to be stored within struct wpa_state_machine for PTK to work. Without
this, PTK derivation would fail and attempt to go through rekeying would
result in disconnection. Furthermore, wpa_rekey_ptk() timer needs to be
started at the completion of FILS association since the place where it
was done for non-FILS cases at the end of 4-way handshake is not reached
when FILS authentication is used.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-18 21:55:39 +03:00
Jouni Malinen
c8931afe24 nl80211: Check nla_put_flag() failure for ext auth
All nla_put*() operations should be verified to succeed, so check this
recently added one for NL80211_ATTR_EXTERNAL_AUTH_SUPPORT.

Fixes: 236e793e7b ("nl80211: External authentication in driver-based AP SME mode")
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-18 21:55:39 +03:00
Jouni Malinen
6151c9b900 EAP-pwd server: Remove unused srandom() call
Commit 4b16c15bbc ("EAP-pwd server: Use os_get_random() for
unpredictable token") replaced use of os_random(), i.e., of random(),
with os_get_random(), but forgot to remove the now unused srandom()
call. Clean up the implementation and remove that unneeded code.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-17 13:24:37 +03:00
Jouni Malinen
d2d1a324ce EAP-pwd peer: Fix reassembly buffer handling
Unexpected fragment might result in data->inbuf not being allocated
before processing and that could have resulted in NULL pointer
dereference. Fix that by explicitly checking for data->inbuf to be
available before using it.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-17 13:24:37 +03:00
Jouni Malinen
fe76f487e2 EAP-pwd server: Fix reassembly buffer handling
data->inbuf allocation might fail and if that were to happen, the next
fragment in the exchange could have resulted in NULL pointer
dereference. Unexpected fragment with more bit might also be able to
trigger this. Fix that by explicitly checking for data->inbuf to be
available before using it.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-17 02:23:31 +03:00
Jouni Malinen
a9d224f560 EAP-pwd server: Fix a memory leak on error path
eap_pwd_h_final() needs to be called to free the value from
eap_pwd_h_init() even in error cases.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-17 01:48:40 +03:00
Jouni Malinen
90ee1bf5f1 EAP-MSCHAPv2: Propagate GetAsymetricStartKey() failures up from getKey()
Report failure from getKey() if MSK cannot be derived due to unexpected
sha1_vector() local failure.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-16 21:21:35 +03:00
Jouni Malinen
824cb5a530 RSN: Ignore IGTK configuration errors with swapped KeyID values
There are number of deployed APs with broken PMF implementation where
the IGTK KDE uses swapped bytes in the KeyID field (0x0400 and 0x0500
instead of 4 and 5). Such APs cannot be trusted to implement BIP
correctly or provide a valid IGTK, so do not try to configure this key
with swapped KeyID bytes. Instead, continue without configuring the IGTK
so that the driver can drop any received group-addressed robust
management frames due to missing keys.

Normally, this error behavior would result in us disconnecting, but
there are number of deployed APs with this broken behavior, so as an
interoperability workaround, allow the connection to proceed.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-16 19:31:34 +03:00
Jouni Malinen
dfdabd917a RSN: Report completion only after IGTK configuration
Previously wpa_supplicant_key_neg_complete() was called before the
attempt to configure the IGTK received from the authenticator. This
could resulted in somewhat surprising sequence of events if IGTK
configuration failed since completion event would be followed by
immediate disconnection event. Reorder these operations so that
completion is reported only if GTK and IGTK are configurated
successfully.

Furthermore, check for missing GTK KDE in case of RSN and handle that
with an explicit disconnection instead of waiting for the AP to deliver
the GTK later.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-16 19:31:08 +03:00
Ilan Peer
323a51cc01 nl80211: Handle NL80211_CMD_PROBE_CLIENT command response
When processing the NL80211_CMD_PROBE_CLIENT command response, the
nl80211 layer in the kernel sends a response containing the cookie
associated with the client probe request. This response was not handled
by driver_nl80211.c when sending the command, and it was mistakenly
handled as an asynchronous event. This incorrect event did not include
the MAC/ACK attributes, so it was ignored in practice, but nevertheless,
the command response should not be processed as an event.

Fix this by reading the response as part of the sending the command
flow.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2019-04-16 01:53:18 +03:00
Jouni Malinen
28f19a3ae5 nl80211: More detailed PROBE_CLIENT debug print
Include the MAC address of the peer, knowledge of whether the poll was
ACKed, and cookie into the debug message to make this more useful.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-04-16 01:52:34 +03:00
Jouni Malinen
0be8b9238f mka: Avoid memory leak in unexpected case in RECEIVE
It looks like it is possible for the RECEIVE state to leak memory where
a previously allocated sm->lki is moved to sm->oki while sm->oki is
pointing to not yet freed entry. It is not clear how this can be
triggered, but it has come up in hwsim testing under heavy load.

Free sm->oki if it is still set in RECEIVE before replacing it with
sm->lki to avoid this memory leak.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-15 22:50:06 +03:00
Jouni Malinen
10cf866bac mesh: Fix operations after SAE state machine removing the STA
It is possible for the SAE state machine to remove the STA and free the
sta pointer in the mesh use cases. handle_auth_sae() could have
dereferenced that pointer and used freed memory in some cases. Fix that
by explicitly checking whether the STA was removed.

Fixes: bb598c3bdd ("AP: Add support for full station state")
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-15 22:09:12 +03:00
Jouni Malinen
153d4c501a mesh: Fix SAE reauthentication processing
ap_free_sta() frees the sta entry, so sta->addr cannot be used after
that call. Fix the sequence of these two calls to avoid use of freed
memory to determine which PMKSA cache entry to remove.

Fixes: 9f2cf23e2e ("mesh: Add support for PMKSA caching")
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-15 21:57:58 +03:00
Jouni Malinen
c5fff8bbd2 nl80211: Update assoc_freq and bss->freq based on real association info
Move event.assoc_info.freq selection to be after the
nl80211_get_assoc_ssid() call so that the current cfg80211 information
on the operating channel can be used should anything unexpected have
happened between the association request and completion of association.
Furthermore, update bss->freq based on assoc_freq to make that
information a bit more useful for station mode. It was already updated
after channel switches during association, but not at the beginning of
association.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-04-14 12:40:45 +03:00
Jouni Malinen
091c227714 nl80211: Clear bss->freq on station mode disconnection
This fixes some issues where bss->freq could have been used to replace
the current operating channel when sending out a management frame.
bss->freq has not been consistently used to track the current operating
channel in station mode, so it should not be trusted for this type of
uses. Clearing it makes this a bit more robust by at least avoiding the
cases of information from past association being used.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-04-14 12:33:37 +03:00
Jouni Malinen
cb5db189ed Remove the unused crypto_ec_cofactor() function
All users of this wrapper function were removed, so the wrapper can be
removed as well.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-04-13 18:28:05 +03:00
Jouni Malinen
8b093db2c3 EAP-pwd: Remove unused checks for cofactor > 1 cases
None of the ECC groups supported in the implementation had a cofactor
greater than 1, so these checks are unreachable and for all cases, the
cofactor is known to be 1. Furthermore, RFC 5931 explicitly disallow use
of ECC groups with cofactor larger than 1, so this checks cannot be
needed for any curve that is compliant with the RFC.

Remove the unneeded group cofactor checks to simplify the
implementation.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-04-13 18:28:05 +03:00
Jouni Malinen
92e1b96c26 EAP-pwd: Disallow ECC groups with a prime under 256 bits
Based on the SAE implementation guidance update to not allow ECC groups
with a prime that is under 256 bits, reject groups 25, 26, and 27 in
EAP-pwd.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-04-13 18:28:05 +03:00
Jouni Malinen
6fe3ee722d tests: EAP-pwd local failure in crypto_bignum_rand()
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-04-13 18:28:05 +03:00
Jouni Malinen
6570949b2c OpenSSL: Fix server side openssl_ecdh_curves configuration with 1.0.2
It looks like SSL_CTX_set1_curves_list() command alone is not sufficient
to enable ECDH curve selection with older OpenSSL versions for TLS
server, so enable automatic selection first and specify the exact list
of curves after that.

This fixes failures in openssl_ecdh_curves test case when hostapd uses
OpenSSL 1.0.2.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-04-13 18:28:05 +03:00
Jouni Malinen
52b1cb5d73 tests: crypto_hash_finish() failure in eap_pwd_kdf()
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-04-13 12:53:42 +03:00
Ryo ONODERA
8f36c84a27 bsd: Fix a typo in error message
When SIOCG80211 failed, show error message with SIOCG80211
instead of SIOCS80211.

Signed-off-by: Ryo ONODERA <ryo@tetera.org>
2019-04-13 11:26:25 +03:00
Jouni Malinen
dd1a8cef4c Remove unnecessary copying of SSID and BSSID for external_auth
The external authentication command and event does not need to copy the
BSSID/SSID values into struct external_auth since those values are used
before returning from the call. Simplify this by using const u8 * to
external data instead of the array with a copy of the external data.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-12 20:43:26 +03:00
Srinivas Dasari
4ffb0fefe4 hostapd: Support external authentication offload in AP mode
Extend commit 5ff39c1380 ("SAE: Support external authentication
offload for driver-SME cases") to support external authentication
with drivers that implement AP SME by notifying the status of
SAE authentication to the driver after SAE handshake as the
driver acts as a pass through for the SAE Authentication frames.

Signed-off-by: Srinivas Dasari <dasaris@codeaurora.org>
2019-04-12 20:33:35 +03:00
Srinivas Dasari
236e793e7b nl80211: External authentication in driver-based AP SME mode
This extends driver interface to nl80211 by introducing the following
changes,
1. Register for Authenication frames in driver-based AP SME mode.
2. Advertise NL80211_ATTR_EXTERNAL_AUTH_SUPPORT in set_ap when
   offloaded SAE authentication is supported.
3. Extend the NL80211_CMD_EXTERNAL_AUTH interface to also send PMKID
   so that the drivers can respond to the PMKSA cached connection
   attempts from the stations avoiding the need to contact user space
   for all PMKID-based connections.
4. Send external auth status to driver only if it is a driver based
   SME solution.

Signed-off-by: Srinivas Dasari <dasaris@codeaurora.org>
2019-04-12 20:29:56 +03:00
nakul kachhwaha
2ab19f4be9 Reset beacon_set_done on disabling interface
beacon_set_done did not get reset to zero on disabling interface using
DISABLE control interface command and the subsequent ENABLE command will
caused configuration of Beacon/Probe Response/Association Response frame
IEs twice. The unnecessary two step configuration can be avoided by
resetting beacon_set_done on DISABLE so that ENABLE can bring up the
interface in a single step with fully updated IEs.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-12 20:18:09 +03:00
Jouni Malinen
89bbe6f87a EAP-pwd: Get rid of unnecessary allocation of temporary buffer
Binary presentations of element and scalar can be written directly to
the allocated commit message buffer instead of having to first write
them into temporary buffers just to copy them to the actual message
buffer.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-09 17:11:15 +03:00
Jouni Malinen
4396f74a36 EAP-pwd: Enforce 1 < rand,mask < r and rand+mask mod r > 1
RFC 5931 has these conditions as MUST requirements, so better follow
them explicitly even if the rand,mask == 0 or rand+mask == 0 or 1 cases
are very unlikely to occur in practice while generating random values
locally.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-09 17:11:15 +03:00
Jouni Malinen
72056f69aa tests: Module tests for const_time_*() functions
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-09 17:11:15 +03:00
Jouni Malinen
16d4f10691 EAP-pwd: Check element x,y coordinates explicitly
This adds an explicit check for 0 < x,y < prime based on RFC 5931,
2.8.5.2.2 requirement. The earlier checks might have covered this
implicitly, but it is safer to avoid any dependency on implicit checks
and specific crypto library behavior. (CVE-2019-9498 and CVE-2019-9499)

Furthermore, this moves the EAP-pwd element and scalar parsing and
validation steps into shared helper functions so that there is no need
to maintain two separate copies of this common functionality between the
server and peer implementations.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-09 17:11:15 +03:00
Mathy Vanhoef
8ad8585f91 EAP-pwd client: Verify received scalar and element
When processing an EAP-pwd Commit frame, the server's scalar and element
(elliptic curve point) were not validated. This allowed an adversary to
bypass authentication, and act as a rogue Access Point (AP) if the
crypto implementation did not verify the validity of the EC point.

Fix this vulnerability by assuring the received scalar lies within the
valid range, and by checking that the received element is not the point
at infinity and lies on the elliptic curve being used. (CVE-2019-9499)

The vulnerability is only exploitable if OpenSSL version 1.0.2 or lower
is used, or if LibreSSL or wolfssl is used. Newer versions of OpenSSL
(and also BoringSSL) implicitly validate the elliptic curve point in
EC_POINT_set_affine_coordinates_GFp(), preventing the attack.

Signed-off-by: Mathy Vanhoef <mathy.vanhoef@nyu.edu>
2019-04-09 17:11:15 +03:00
Mathy Vanhoef
d63edfa902 EAP-pwd server: Detect reflection attacks
When processing an EAP-pwd Commit frame, verify that the peer's scalar
and elliptic curve element differ from the one sent by the server. This
prevents reflection attacks where the adversary reflects the scalar and
element sent by the server. (CVE-2019-9497)

The vulnerability allows an adversary to complete the EAP-pwd handshake
as any user. However, the adversary does not learn the negotiated
session key, meaning the subsequent 4-way handshake would fail. As a
result, this cannot be abused to bypass authentication unless EAP-pwd is
used in non-WLAN cases without any following key exchange that would
require the attacker to learn the MSK.

Signed-off-by: Mathy Vanhoef <mathy.vanhoef@nyu.edu>
2019-04-09 17:11:15 +03:00
Mathy Vanhoef
70ff850e89 EAP-pwd server: Verify received scalar and element
When processing an EAP-pwd Commit frame, the peer's scalar and element
(elliptic curve point) were not validated. This allowed an adversary to
bypass authentication, and impersonate any user if the crypto
implementation did not verify the validity of the EC point.

Fix this vulnerability by assuring the received scalar lies within the
valid range, and by checking that the received element is not the point
at infinity and lies on the elliptic curve being used. (CVE-2019-9498)

The vulnerability is only exploitable if OpenSSL version 1.0.2 or lower
is used, or if LibreSSL or wolfssl is used. Newer versions of OpenSSL
(and also BoringSSL) implicitly validate the elliptic curve point in
EC_POINT_set_affine_coordinates_GFp(), preventing the attack.

Signed-off-by: Mathy Vanhoef <mathy.vanhoef@nyu.edu>
2019-04-09 17:11:15 +03:00
Jouni Malinen
ac8fa9ef19 SAE: Fix confirm message validation in error cases
Explicitly verify that own and peer commit scalar/element are available
when trying to check SAE confirm message. It could have been possible to
hit a NULL pointer dereference if the peer element could not have been
parsed. (CVE-2019-9496)

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-09 17:11:15 +03:00
Jouni Malinen
cff138b074 SAE: Use constant time operations in sae_test_pwd_seed_ffc()
Try to avoid showing externally visible timing or memory access
differences regardless of whether the derived pwd-value is smaller than
the group prime.

This is related to CVE-2019-9494.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-09 17:11:15 +03:00
Jouni Malinen
f8f20717f8 SAE: Use const_time selection for PWE in FFC
This is an initial step towards making the FFC case use strictly
constant time operations similarly to the ECC case.
sae_test_pwd_seed_ffc() does not yet have constant time behavior,
though.

This is related to CVE-2019-9494.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-09 17:11:15 +03:00
Jouni Malinen
90839597cc SAE: Mask timing of MODP groups 22, 23, 24
These groups have significant probability of coming up with pwd-value
that is equal or greater than the prime and as such, need for going
through the PWE derivation loop multiple times. This can result in
sufficient timing different to allow an external observer to determine
how many rounds are needed and that can leak information about the used
password.

Force at least 40 loop rounds for these MODP groups similarly to the ECC
group design to mask timing. This behavior is not described in IEEE Std
802.11-2016 for SAE, but it does not result in different values (i.e.,
only different timing), so such implementation specific countermeasures
can be done without breaking interoperability with other implementation.

Note: These MODP groups 22, 23, and 24 are not considered sufficiently
strong to be used with SAE (or more or less anything else). As such,
they should never be enabled in runtime configuration for any production
use cases. These changes to introduce additional protection to mask
timing is only for completeness of implementation and not an indication
that these groups should be used.

This is related to CVE-2019-9494.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-09 17:11:15 +03:00
Jouni Malinen
362704dda0 SAE: Avoid branches in is_quadratic_residue_blind()
Make the non-failure path in the function proceed without branches based
on r_odd and in constant time to minimize risk of observable differences
in timing or cache use. (CVE-2019-9494)

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-09 17:11:15 +03:00
Jouni Malinen
6513db3e96 SAE: Minimize timing differences in PWE derivation
The QR test result can provide information about the password to an
attacker, so try to minimize differences in how the
sae_test_pwd_seed_ecc() result is used. (CVE-2019-9494)

Use heap memory for the dummy password to allow the same password length
to be used even with long passwords.

Use constant time selection functions to track the real vs. dummy
variables so that the exact same operations can be performed for both QR
test results.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-09 17:11:15 +03:00
Jouni Malinen
aaf65feac6 EAP-pwd: Use constant time and memory access for finding the PWE
This algorithm could leak information to external observers in form of
timing differences or memory access patterns (cache use). While the
previous implementation had protection against the most visible timing
differences (looping 40 rounds and masking the legendre operation), it
did not protect against memory access patterns between the two possible
code paths in the masking operations. That might be sufficient to allow
an unprivileged process running on the same device to be able to
determine which path is being executed through a cache attack and based
on that, determine information about the used password.

Convert the PWE finding loop to use constant time functions and
identical memory access path without different branches for the QR/QNR
cases to minimize possible side-channel information similarly to the
changes done for SAE authentication. (CVE-2019-9495)

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-09 17:11:15 +03:00