Commit graph

11380 commits

Author SHA1 Message Date
Jouni Malinen
2462f347bc Change version number to v2.6 for the release
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-10-02 21:51:11 +03:00
Avraham Stern
8181c13a8d tests: Fix cfg80211_tx_frame test
In case that a dedicated P2P Device interface is used, a new interface
must be create for a P2P group. Thus, in order to send mgmt
frames, attach a new WpaSupplicant object to the newly created group
and use this object for sending the frames.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2016-10-02 21:27:43 +03:00
Ilan Peer
401ff12799 tests: Use global control interface to remove P2P networks
Use the global control interface to remove P2P networks in
persistent_group_peer_dropped3 to support configurations that use a
dedicated P2P Device interface.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2016-10-02 21:16:55 +03:00
Avraham Stern
a71a3d6d46 tests: Fix p2p_ext_vendor_elem_assoc test with P2P Device interface
For configurations that use a dedicated P2P Device interface, which
mandates that a separate interface is used for the P2P group, vendor
specific IE's must be added to the VENDOR_ELEM_P2P_* frame types in
order to be used by the P2P group interface. The VENDOR_ELEM_ASSOC_REQ
(13) parameter would need to be issued on the group interface which
would be challenging to do due to timing in case a separate group
interface gets used.

In case a dedicated P2P Device interface is used, don't include a test
for VENDOR_ELEM_ASSOC_REQ to avoid failing this part of the test case.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2016-10-02 19:57:34 +03:00
Avraham Stern
5ac8f8623d Fix PNO restart flow
PNO is sometimes restarted due to changes in scan parameters
(e.g., selected network changed or MAC randomization being
 enabled/disabled). Restart is done by stopping PNO and immediately
starting it again. This may result in the SCHED_SCAN_STOPPED event being
received after the request for new PNO, which will make wpa_supplicant
believe PNO is not active although it is actually is. As a result, the
next request to start PNO will fail because PNO is active and should be
stopped first.

Fix this by deferring the request to start PNO until the
SCHED_SCAN_STOPPED event is received in case sched_scan is being
stopped.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2016-10-02 19:49:42 +03:00
Avraham Stern
14f34a7303 Continue scanning if sched_scan stops unexpectedly
When scheduled scan stops without the interface request (for example,
driver stopped it unexpectedly), start a regular scan to continue
scanning for networks and avoid being left with no scan at all.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2016-10-02 19:38:57 +03:00
David Spinadel
1ac388633a Remove disconnected APs from BSS table if likely out-of-range
In some cases, after a sudden AP disappearing and reconnection to
another AP in the same ESS, if another scan occurs, wpa_supplicant might
try to roam to the old AP (if it was better ranked than the new one)
because it is still saved in BSS list and the blacklist entry was
cleared in previous reconnect. This attempt is going to fail if the AP
is not present anymore and it'll cause long disconnections.

Remove an AP that is probably out of range from the BSS list to avoid
such disconnections. In particular mac80211-based drivers use the
WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY reason code in locally generated
disconnection events for cases where the AP does not reply anymore.

Signed-off-by: David Spinadel <david.spinadel@intel.com>
2016-10-01 11:14:02 +03:00
Jouni Malinen
d57ca5cd45 tests: Fix ap_track_taxonomy to clear country code setting
This test case could have ended with the station devices still in US
regulatory domain and that could make a following test case fail in some
sequences. For example, "ap_track_taxonomy ibss_5ghz" sequence made
ibss_5ghz fail to see the regdom change event since there was not one
due to the US country code already being in use at the beginning of the
test case. Fix this by clearing the country code at the end of
ap_track_taxonomy.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-09-30 23:46:17 +03:00
Arik Nemtsov
ebf59eb549 Restart PNO/sched_scan on channel list update
As the scan channels might need to change when the channel list has been
updated by the kernel. Use the simulated sched_scan timeout
(wpas_scan_restart_sched_scan()) to handle a possible race where an
ongoing sched_scan has stopped asynchronously while trying to restart a
new sched_scan.

Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
2016-09-30 22:45:03 +03:00
Nishant Chaprana
746e5c2565 Fix spelling mistakes in number of comments
Signed-off-by: Nishant Chaprana <n.chaprana@samsung.com>
2016-09-30 22:45:03 +03:00
Sunil Dutt
8b6688847e Add explicit enum values for QCA vendor config attributes
This makes it easier to copy a subset of definitions without
accidentally getting mismatching values.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-09-30 22:45:03 +03:00
Jouni Malinen
09b812c952 tests: Extend gas_anqp_get to cover MBO cases with non-MBO AP
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-09-30 22:45:03 +03:00
vamsi krishna
8f47917493 MBO: Add support to send ANQP request to get cellular preference
This extends ANQP_GET command to support querying MBO cellular
preference also. The cellular preference can be requested along with
neigbor report by appending mbo:1 to the command arguments.

For example:
ANQP_GET <bssid> 272,mbo:1

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-09-30 22:45:03 +03:00
Jouni Malinen
5b71cb552b tests: Update server and user certificates (2015)
The previous versions expired, so need to re-sign these to fix number of
the EAP test cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-09-30 22:45:03 +03:00
Jouni Malinen
a39a54517a tests: Long P2P_LISTEN and offchannel TX
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-09-27 00:43:27 +03:00
Jouni Malinen
5bb7327a69 Share a common helper function for restarting sched_scan
This code sequence was already used at two different places (and an
additional one has been proposed), so add a common helper function to
avoid having to copy-paste this functionality in multiple locations.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-09-27 00:09:33 +03:00
Max Stepanov
be7ebd892e wpa_supplicant: Cancel sched_scan on SELECT_NETWORK initiated scan
If a scheduled scan is running on select network command,
cancel and reset it before kicking off a regular scan request.

Signed-off-by: Max Stepanov <Max.Stepanov@intel.com>
2016-09-27 00:02:44 +03:00
lifeng
8b7c5b8941 QCA vendor command for antenna diversity feature
The user space app use QCA_NL80211_VENDOR_SUBCMD_GET_CHAIN_RSSI cmd to
get the corresponding antenna rssi value for the specific chain. And the
associcated attributes are added to configure the antenna diversity and
related selftest.

Signed-off-by: Li Feng <lifeng@qti.qualcomm.com>
2016-09-26 23:46:59 +03:00
Jouni Malinen
61bcc85398 Update ChangeLog files for v2.6
This adds a summary of new changes since the last update.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-09-25 21:12:11 +03:00
Jouni Malinen
7084c4d489 tests: WNM BSS Transition Management request getting rejected
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-09-25 17:31:26 +03:00
Jouni Malinen
62066bef69 tests: MBO and ignoring disallowed association
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-09-25 17:31:26 +03:00
Jouni Malinen
f75a0c0c0c tests: Fix a typo in a debug message (mbo_assoc_disallow)
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-09-25 17:31:26 +03:00
Jouni Malinen
80b84fb2d2 tests: Update MBO test cases for non_pref_chan changes
The reason_detail field was removed from the implementation, so the test
cases need matching changes.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-09-25 17:31:26 +03:00
vamsi krishna
64c92c0757 MBO: Do not parse reason_detail in non_pref_chan attr (AP)
The reason detail field was removed from non_pref_chan attr in MBO
v0.0_r25 draft. Don't parse for this element to be compliant with the
latest drafr.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-09-25 17:31:26 +03:00
vamsi krishna
4a83d4b686 MBO: Do not add reason_detail in non_pref_chan attr (STA)
The reason detail field in non_pref_chan attribute was removed from MBO
draft v0.0_r25, so the STA should not include this field to be compliant
with the latest draft.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-09-25 17:31:26 +03:00
vamsi krishna
a483c6f1e2 WNM: Add testing option to reject BSS Transition Management Request
For testing purposes, it is useful to have an option to be able to
reject BTM Request sent by AP in order to verify the AP behavior upon
BTM Request rejection.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-09-25 17:31:26 +03:00
vamsi krishna
2800ec85d2 MBO: Add QCA vendor option to configure driver to ignore assoc disallow
MBO capable APs can set association disallowed in the Beacon/Probe
Response frames. For testing purposes, the STA needs to be configured to
not ignore the association disallowed set by APs and continue to connect
to such AP like non-MBO enabled STA. Add a QCA vendor attribute for
QCA_NL80211_VENDOR_SUBCMD_SET_WIFI_CONFIGURATION vendor sub command to
configure the driver to ignore association disallowed functionality.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-09-25 17:31:26 +03:00
vamsi krishna
6ad37d73ca MBO: Add support to ignore association disallowed set by AP
Add a testing mechanism to allow association disallowed set by AP to be
ignored. This can be used to verify AP behavior for disallowing a
specific association.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-09-25 17:31:26 +03:00
Zhang Qian
320caeab29 Add attributes for QCA_NL80211_VENDOR_SUBCMD_LL_STATS_EXT
More attributes are added for QCA_NL80211_VENDOR_SUBCMD_LL_STATS_EXT
1. Peer signal stats;
2. Peer TX stats;
3. Peer RX stats

Signed-off-by: Zhang Qian <zhangq@qti.qualcomm.com>
2016-09-23 21:13:58 +03:00
Jouni Malinen
0df12cbddc IEEE P802.11ah/D10.0 PV1 CCMP test vectors
Extend wlantest test_vectors to calculate test vectors for P802.11ah
Annex J.6.4.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-09-23 17:49:33 +03:00
Mikael Kanstrup
7137c7daee tests: Add testcase for reconnect failure due to auth timeout
Add testcase to verify a failed reconnect attempt due to authentication
timeout blacklists the correct AP. Driver capabilities are forced to
non-SME and driver roaming (BSS selection) mode.

Signed-off-by: Mikael Kanstrup <mikael.kanstrup@sonymobile.com>
2016-09-23 17:36:55 +03:00
Mikael Kanstrup
d258c70f96 tests: Add testcase for (reassoc) roam failure due to auth timeout
Add testcase to verify failed roaming attempt due to authentication
timeout blacklists the correct AP. Roaming attempt is performed
with the reassociate command and bssid_set=1. Driver capabilities
are forced to non-SME and driver roaming (BSS selection) mode.

Signed-off-by: Mikael Kanstrup <mikael.kanstrup@sonymobile.com>
2016-09-23 17:36:55 +03:00
Mikael Kanstrup
02adead53e Add ignore_auth_resp control interface debug parameter
Implement "SET ignore_auth_resp <0/1>" command to simulate auth/assoc
response loss and EAPOL RX packet loss by ignoring corresponding
incoming events.

Signed-off-by: Mikael Kanstrup <mikael.kanstrup@sonymobile.com>
2016-09-23 17:36:55 +03:00
Jouni Malinen
ef24ad3ec5 nl80211: Remove unnecessary duplication from nl80211_set_param()
There is no need to find bss->drv separately for each parameter, so do
this once at the beginning of the function.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-09-23 17:36:55 +03:00
Mikael Kanstrup
4d584d8c2b nl80211: Add driver parameter force_bss_selection
Add driver parameter command to force capability flag
WPA_DRIVER_FLAGS_BSS_SELECTION even if driver states otherwise. This is
mainly for testing purposes.

Signed-off-by: Mikael Kanstrup <mikael.kanstrup@sonymobile.com>
2016-09-23 17:36:55 +03:00
Mikael Kanstrup
04e3d8156a Blacklist correct BSSID on authentication timeout
If authentication times out while reassociating to same ESS incorrect
BSSID may end up being blacklisted. Use pending_bssid field on
authentication timeout and deauthentication to ensure the correct AP
gets blacklisted. This is mainly to address cases related to Android
framework roaming behavior.

Signed-off-by: Mikael Kanstrup <mikael.kanstrup@sonymobile.com>
2016-09-23 17:36:55 +03:00
Jouni Malinen
1c82fbf271 tests: Make pmksa_cache_{,opportunistic_}multiple_sta more robust
Clear wpa_supplicant scan cache before starting these test cases since
the ROAM command depends on the correct BSS entry being found.
scan_for_bss() does not enforce that correct entry to be present if
there was an earlier BSS entry with the same BSSID.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-09-23 17:36:14 +03:00
Jouni Malinen
78a37200f8 tests: Reset wlan5 device before RELOG command
This moves the wpa_supplicant debug entries from the end of a test case
using a dynamically added wlan5 interface to the correct test case,
i.e., the test case that added the interface instead of whatever test
case happens to follow this.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-09-23 16:03:59 +03:00
Jouni Malinen
50bb5c8627 tests: WPA-PSK AP and only rsn_pairwise set
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-09-23 11:45:55 +03:00
Ilan Peer
dc2744f922 P2P: Fix common frequencies calculation for a group
Ignore group members for which there is no supported channels
information when calculating common group frequencies.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2016-09-22 23:48:14 +03:00
Ilan Peer
7487ef144e tests: Skip wpas_ap_dfs when MCC > 1
Skip wpas_ap_dfs in case that multi-channel is used, as
DFS operation is not supported in such a case.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2016-09-22 23:46:27 +03:00
Max Stepanov
5cdd729e26 P2P: Fix compilation warning in p2p_supplicant.c
On some architectures unsigned int differs from size_t, and
some compilers warn about it.

Signed-off-by: Max Stepanov <Max.Stepanov@intel.com>
2016-09-22 23:33:44 +03:00
Moshe Benji
14220fe64c Flush the BSS (scan) entries when an interface becomes disabled
When an interface becomes disabled (e.g., when RF-kill becomes blocked)
we should clear the stored scan results to avoid maintaining stale
information.

Fix this by flushing the BSS entries when an interface becomes
disabled.

Signed-off-by: Moshe Benji <moshe.benji@intel.com>
2016-09-22 23:31:19 +03:00
Reiner Herrmann
b223b55345 doc: Remove duplicate description for -t
Signed-off-by: Reiner Herrmann <reiner@reiner-h.de>
2016-09-22 23:22:36 +03:00
Jouni Malinen
5c30a84b91 tests: mode=mesh in STATUS
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-09-22 23:20:48 +03:00
Saurav Babu
cee0be7343 Show mode=mesh in STATUS command
Signed-off-by: Saurav Babu <saurav.babu@samsung.com>
2016-09-22 23:19:17 +03:00
Srinivas Dasari
0d7eba5417 Define a QCA vendor command to validate encryption engine
This command carries 802.11 header and payload along with key (TK) and
PN for encryption/decryption purpose. Firmware/driver encrypts/decrypts
the given data and sends to userspace as a response to the command. User
space component can validate the data received from the driver to unit
test the hardware's encryption engine.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-09-22 20:30:05 +03:00
Jouni Malinen
425cb95337 tests: AP tracking STA taxonomy
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-09-22 00:45:24 +03:00
Denton Gentry
442819406c taxonomy: Store Probe Request frames in hostapd_sta_info
A weakness in the initial client taxonomy mechanism is from storing both
the Probe and Associate in struct sta_info. struct sta_info is created
after a client associates (or starts authentication frame exchange),
which means that any Probe Request frames sent prior to association are
not retained. The Associate Request frame has to be seen, and then
another Probe Request frame after association, before we have a
signature for the client.

Most clients send lots of Probe Request frames (lots and lots and lots
of Probes, actually), but a few do not. ChromeOS is notably sparing in
sending Probe Request frames, it can take a long time before a signature
for a ChromeOS device is available.

Store the most recent Probe Request frame in struct hostapd_sta_info
tracking list. When a struct sta_info is created, move the Probe Request
frame information from struct hostapd_sta_info to struct sta_info.

Signed-off-by: dgentry@google.com (Denton Gentry)
Signed-off-by: denny@geekhold.com (Denton Gentry)
Signed-off-by: rofrankel@google.com (Richard Frankel)
Signed-off-by: richard@frankel.tv (Richard Frankel)
2016-09-22 00:45:24 +03:00
Denton Gentry
04059ab844 Passive Client Taxonomy
Implement the signature mechanism described in the paper
"Passive Taxonomy of Wifi Clients using MLME Frame Contents"
published by Denton Gentry and Avery Pennarun.

http://research.google.com/pubs/pub45429.html
https://arxiv.org/abs/1608.01725

This involves:
1. Add a CONFIG_TAXONOMY compile option. Enabling taxonomy incurs
   a memory overhead of up to several kilobytes per associated
   station.
2. If enabled, store the Probe Request and (Re)Associate Request frame in
   struct sta_info.
3. Implement code to extract the ID of each Information Element,
   plus selected fields and bitmasks from certain IEs, into a
   descriptive text string. This is done in a new source file,
   src/ap/taxonomy.c.
4. Implement a "signature qq:rr:ss:tt:uu:vv" command
   in hostapd_cli to retrieve the signature.

Signatures take the form of a text string. For example, a signature
for the Nexus 5X is:
  wifi4|probe:0,1,127,45,191,htcap:01ef,htagg:03,htmcs:0000ffff,vhtcap:338061b2,
  vhtrxmcs:030cfffa,vhttxmcs:030cfffa,extcap:00000a0201000040|assoc:0,1,48,45,
  221(0050f2,2),191,127,htcap:01ef,htagg:03,htmcs:0000ffff,vhtcap:339071b2,
  vhtrxmcs:030cfffa,vhttxmcs:030cfffa,extcap:0000000000000040

Signed-off-by: dgentry@google.com (Denton Gentry)
Signed-off-by: denny@geekhold.com (Denton Gentry)
Signed-off-by: rofrankel@google.com (Richard Frankel)
Signed-off-by: richard@frankel.tv (Richard Frankel)
2016-09-22 00:45:24 +03:00