Commit graph

15329 commits

Author SHA1 Message Date
Jouni Malinen
972edba185 tests: DPP connection status - association rejection
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-20 16:53:26 +02:00
Jouni Malinen
9be30ffc13 DPP: Abort ongoing scan if connection status needs to be sent
Ongoing scan could prevent the station Enrollee from sending out DPP
connection status after the 15 second timeout and that would result in
the Configurator timing out on the wait for the status report. Abort any
ongoing scan, if needed, to avoid this.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-20 16:51:59 +02:00
Vamsi Krishna
3f3876344e SAE: Enable NEED_DH_GROUPS_ALL for CONFIG_TESTING_OPTIONS=y builds
Enable all DH FFC groups for SAE in wpa_supplicant testing builds. These
are needed to allow more testing coverage for AP functionality.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-20 16:27:19 +02:00
Min Liu
1f1567d2a6 QCA vendor command for getting STA information
Add a QCA vendor subcommand QCA_NL80211_VENDOR_SUBCMD_GET_STA_INFO with
attributes defined in enum qca_wlan_vendor_attr_get_sta to get
information for a BSS in STA mode or for a peer STA in AP mode. This
vendor sub command can be used to get STA information from the driver to
userspace. The attributes defined in enum
qca_wlan_vendor_attr_get_sta_info are used to encapsulate required
information.

Signed-off-by: Min Liu <minliu@codeaurora.org>
2019-12-20 16:25:30 +02:00
Jouni Malinen
5ae5dd03d5 tests: Automatic channel selection with freqlist set
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-20 13:41:57 +02:00
Vamsi Krishna
e5620bf025 6 GHz: Select channel width using configured op_class
Use op_class to derive channel width for the operating channel when
op_class is configured by the user in both fixed channel and ACS cases.
We can avoid using ht_capab field to derive channel width especially in
the 6 GHz band in which only HE is supported.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-20 13:38:05 +02:00
Vamsi Krishna
0bfc04b8d0 Do not enable HT/VHT when operating in 6 GHz band
Only HE mode is allowed in the 6 GHz band hence do not enable HT/VHT
even if they are configured by the user.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-20 13:25:07 +02:00
Ankita Bajaj
da8570f4c9 Allow non-PCS 6 GHz channels to be excluded from ACS
Add support to exclude non-PSC 6 GHz channels from the input frequency
list to ACS. The new acs_exclude_6ghz_non_psc=1 parameter can be used by
6 GHz only APs.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-20 13:23:13 +02:00
Ankita Bajaj
59bb72642a Allow ACS channel list to be configured as frequencies (in MHz)
The channel numbers are duplicated between 2.4 GHz / 5 GHz bands and 6
GHz band. Hence, add support to configure a list of frequencies to ACS
(freqlist) instead of a list of channel numbers (chanlist). Also, both 5
GHz and 6 GHz channels are referred by HOSTAPD_MODE_IEEE80211A. The 6
GHz channels alone can be configured by using both mode and frequency
list.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-20 13:19:52 +02:00
Ankita Bajaj
5f9b4afdfa Use frequency in HT/VHT validation steps done before starting AP
Using the channel parameter for validating allowed channel combinations
is not scalable to add 6 GHz support in the future since channel numbers
are duplicated between 2.4 GHz / 5 GHz bands and 6 GHz band. Hence use
frequency field for all channel combination validation steps done before
starting AP.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-20 13:05:39 +02:00
Ankita Bajaj
59e33b4a98 ACS: Select current hw_mode based on the selected frequency
After receiving ACS offload results, select the current hw_mode based on
the frequency selected by the ACS algorithm. The current hw_mode will be
further used during other validation steps such as HT capability
validations, DFS validation, etc.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-20 12:45:03 +02:00
Ankita Bajaj
bb781c763f AP: Populate iface->freq before starting AP
Using channel field while starting AP will cause issues with the new
6GHz band as the channel numbers are duplicated between the different
bands. Populate iface->freq before starting AP so that it can be used
instead of the channel number for all validations that need to be done
while starting AP.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-20 12:42:47 +02:00
Ankita Bajaj
41cac481a8 ACS: Use frequency params in ACS (offload) completed event interface
Replace channel fields with frequency fields in ACS completed event
interface from the driver layer. Use
QCA_WLAN_VENDOR_ATTR_ACS_PRIMARY_FREQUENCY and
QCA_WLAN_VENDOR_ATTR_ACS_SECONDARY_FREQUENCY attributes if the driver
includes them in the QCA_NL80211_VENDOR_SUBCMD_DO_ACS event, otherwise
use QCA_WLAN_VENDOR_ATTR_ACS_PRIMARY_CHANNEL and
QCA_WLAN_VENDOR_ATTR_ACS_SECONDARY_CHANNEL attributes to maintain
backwards compatibility with old drivers.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-20 12:31:01 +02:00
Ankita Bajaj
840532aea5 Search through all hw_features sets in hw_get_channel_freq()
The 5 GHz channels are stored in one hw_features set with mode
HOSTAPD_MODE_IEEE80211A while the 6 GHz channels will need to stored in
a separate hw_features set (but with same mode HOSTAPD_MODE_IEEE80211A)
due to possibility of different HE capabilities being available between
the 5 GHz and 6 GHz bands.

Search through all hw_features sets whose mode is same as the input mode
while finding channel corresponding to the input frequency in
hw_get_channel_freq().

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-20 12:21:45 +02:00
Ankita Bajaj
15d3568739 ACS: Add channels from all modes matching with configured hw mode
The 5 GHz channels are stored in one hw_features set with mode
HOSTAPD_MODE_IEEE80211A while the 6 GHz channels will need to stored in
a separate hw_features set (but with same mode HOSTAPD_MODE_IEEE80211A)
due to possibility of different HE capabilities being available between
the 5 GHz and 6 GHz bands.

Iterate through all hw_features sets and populate channels from all
hw_features sets whose hardware mode is matching the configured hardware
mode while preparing the channel list for ACS.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-20 12:21:41 +02:00
Ahmad Masri
996662250d P2P: Add support for EDMG channels
This allows a P2P connection over P802.11ay EDMG channels to achieve the
highest link speed that the standard allows for channel bonding (CB) up
to CB4.

Let each P2P peer add its EDMG channels to the Supported Channels IE
advertised in P2P GO negotiation. Give EDMG channels priority when peers
negotiate for operating channel.

User may add 'edmg' parameter to p2p_connect, p2p_add_group, and
p2p_invite commands to prefer an EDMG channel for the P2P link. User may
also set p2p_go_edmg=1 in wpa_supplicant configuration file to prefer
EDMG.

When EDMG is used, P2P will try to find the highest channel bonding
supported channel that matches the frequency parameter, if the devices
do not support EDMG, the P2P connection will use a legacy (1-6) 60 GHz
channel.

Signed-off-by: Ahmad Masri <amasri@codeaurora.org>
2019-12-20 00:13:08 +02:00
Ahmad Masri
f86e34168e Update operating classes and channels for the 60 GHz band
Update new channels in Channel Bonding (CB2 ... CB4) in the 60 GHz band
for different regulatory regions according to the latest draft amendment
IEEE P802.11ay/D5.0.

Signed-off-by: Ahmad Masri <amasri@codeaurora.org>
2019-12-20 00:00:52 +02:00
Ahmad Masri
a19277a28b Add EDMG bandwidth to channel frequency APIs
Add EDMG bandwidth to CHANWIDTH_ defines.

Update API ieee80211_freq_to_channel_ext() to support EDMG bandwidth
for EDMG channels.

Signed-off-by: Ahmad Masri <amasri@codeaurora.org>
2019-12-19 23:46:28 +02:00
Jouni Malinen
46cb161a81 tests: Clear IP configuration from sigma_dut explicitly
The 127.0.0.11/24 address that could have been left on the wlan0
interface resulted in some test case sequence failures. Fix this by
explicitly clearing that address when terminating sigma_dut.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-18 17:12:23 +02:00
Jouni Malinen
95337647aa tests: Make FILS+FT test cases more robust
Wait for hostapd to report completion of association before running the
data connectivity check.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-18 16:30:40 +02:00
Jouni Malinen
5a563a3d34 Avoid compiler warning on shadowing a local variable
Fixes: 7fde39fb1a ("Add sae_rejected_groups to hostapd STA control interface command")
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-18 13:46:59 +02:00
Jouni Malinen
7327f0fa6f tests: Fix skipping of new sigma_dut test cases
start_sigma_dut() can raise an exception and as such, assigning a
variable to its return value within a try block does not work in this
manner when the result is supposed to be used in the finally statement.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-13 21:19:36 +02:00
Jouni Malinen
06540f232c tests: SAE H2E and RSNXE mismatch in EAPOL-Key msg 2/4 retries
The second round may use PMKSA caching, but AP will need to reject msg
2/4 in that case as well due to RSNXE mismatch.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-13 03:27:25 +02:00
Jouni Malinen
e3c476bd8c SAE H2E: Fix RSNXE override in EAPOL-Key msg 2/4 for testing purposes
The previous implementation missed the case where EAPOL-Key frame may be
reported as having been received before the association event is
processed. This would have resulted in not using the RSNXE override for
EAPOL-Key msg 2/4 when the pending EAPOL-Key frame gets processed
immediately after processing the association event. Fix this by moving
the override case to be handled before that.

Fixes: 1325655397 ("SAE H2E: RSNXE override for testing purposes")
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-13 03:08:27 +02:00
Jouni Malinen
fb3ef06dde tests: sae_rejected_groups with and without sigma_dut
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-12 23:52:36 +02:00
Jouni Malinen
7fde39fb1a Add sae_rejected_groups to hostapd STA control interface command
This is mainly for testing purposes to be able to check which groups
a STA reports as having been rejected when using SAE H2E.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-12 23:52:36 +02:00
Jouni Malinen
5661ebd774 DPP: Configurator netRole for Enrollee
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-12 02:33:00 +02:00
Jouni Malinen
7404574458 DPP: Replace ap boolean with netRole enum in Configurator params
The netRole enum is more generic and can be extended to include new
roles (e.g., Configurator) more easily.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-12 02:33:00 +02:00
Jouni Malinen
053ce8bff7 tests: OCE association in open network
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-12 02:00:26 +02:00
Jouni Malinen
326acce814 tests: sigma_dut controlled SAE association with group negotiation
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-12 01:59:06 +02:00
Jouni Malinen
2ca63f58b9 tests: sigma_dut controlled SAE H2E AP misbehavior with RSNXE
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-07 17:46:44 +02:00
Jouni Malinen
63585099d6 tests: SAE H2E and RSNXE mismatch in EAPOL-Key msg 3/4
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-07 17:46:44 +02:00
Jouni Malinen
f2c4b44b40 SAE H2E: RSNXE override in EAPOL-Key msg 3/4
This new hostapd configuration parameter rsnxe_override_eapol=<hexdump>
can be used to override RSNXE value in EAPOL-Key msg 3/4 for testing
purposes.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-07 17:32:17 +02:00
Jouni Malinen
49ac2466c3 tests: sigma_dut controlled SAE H2E misbehavior with RSNXE
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-07 14:00:23 +02:00
Jouni Malinen
250db2ab51 tests: SAE H2E and RSNXE mismatch (AP detecting)
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-07 12:56:19 +02:00
Jouni Malinen
1325655397 SAE H2E: RSNXE override for testing purposes
"SET rsnxe_override_{assoc,eapol} <hexdump>" can now be used to override
RSNXE in (Re)Association Request frames and EAPOL-Key msg 2/4 for
testing purposes.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-07 12:54:54 +02:00
Jouni Malinen
dedd8f336e tests: sigma_dut controlled SAE H2E misbehavior with rejected groups
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-07 00:51:40 +02:00
Jouni Malinen
90d84bc511 tests: SAE H2E and rejected groups indication (unexpected group)
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-07 00:45:10 +02:00
Jouni Malinen
a889e9a70c SAE: Reject invalid rejected group report in SAE commit explicitly (AP)
Previously, this case was ignored silently in AP mode. While that could
be a reasonable approach for an unexpected condition, it would be fine
to reject this case explicitly as well. This makes it somewhat easier to
test unexpected SAE H2E vs. looping behavior.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-07 00:39:46 +02:00
Jouni Malinen
c88e01e1b6 SAE H2E: Fix validation of rejected groups list
check_sae_rejected_groups() returns 1, not -1, in case an enabled group
is rejected. The previous check for < 0 could not have ever triggered.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-07 00:28:13 +02:00
Jouni Malinen
b834e97003 SAE H2E: Testing option to report extra rejected groups
"SET extra_sae_rejected_groups <groups>" can now be used to enable test
mode in which wpa_supplicant will report additional groups (configured
as space separated integers) when using SAE H2E.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-07 00:26:13 +02:00
Jouni Malinen
4d16d7cc8d tests: sigma_dut controlled SAE H2E misbehavior with looping forced
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-06 17:39:46 +02:00
Jouni Malinen
b1905c7d8e tests: SAE PWE derivation with H2E-only AP and STA forcing loop
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-06 17:28:52 +02:00
Jouni Malinen
918df2227e SAE: Reject unexpected Status Code in SAE commit explicitly (AP)
Previously, this case was ignored silently in AP mode. While that could
be a reasonable approach for an unexpected condition, it would be fine
to reject this case explicitly as well. This makes it somewhat easier to
test unexpected SAE H2E vs. looping behavior.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-06 17:26:57 +02:00
Jouni Malinen
405946d76a SAE: Testing option to ignore H2E requirement mismatch
"SET ignore_sae_h2e_only 1" can now be used to configurate
wpa_supplicant to a test mode where it ignores AP's H2E-required
advertisement and try to connect with hunt-and-pecking loop instead.
This is used only for testing AP behavior with unexpected STA behavior.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-06 17:13:59 +02:00
Ankita Bajaj
23acdd9f33 Fix memory leak in ACS offload operation
freq_list is built in allocated heap memory and it needs to be freed
before returning from this function.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-05 18:02:46 +02:00
Ankita Bajaj
e86ba912aa ACS: Remove redundant ch_list parameters from do_acs interface
Clean up do_acs interface to not pass ch_list to drivers as the same
information is available in freq_list. The channel numbers are
duplicated between 2.4 GHz and 5 GHz bands and the 6 GHz band. So, use
the QCA_WLAN_VENDOR_ATTR_ACS_CH_LIST to populate only 2.4 GHz and 5 GHz
channels to ensure backwards compatibility with old drivers which do not
have support to decode the newer QCA_WLAN_VENDOR_ATTR_ACS_FREQ_LIST
attribute.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-05 18:02:34 +02:00
Ankita Bajaj
3cf360b8e2 DFS: Don't handle DFS ops for 6 GHz channels
Skip DFS checks and CAC operation for 6 GHz channels. AFC checks
will be added for 6 GHz channels later.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-05 17:12:27 +02:00
Ankita Bajaj
ee0030e814 6 GHz: Do not check for HT capability on 6 GHz channels
HT capability check is not required when starting AP on 6 GHz band as
only HE operation mode is allowed in the 6 GHz band.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-05 17:12:27 +02:00
Jouni Malinen
4a667b01e6 tests: DPP bootstrapping via NFC URI record
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-05 12:37:51 +02:00