Commit graph

52 commits

Author SHA1 Message Date
Jouni Malinen
21cf2c5baf tests: Skip more tests based on missing TKIP support
This makes it more convenient to run tests with builds that disable
TKIP/WPA(v1) support completely.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-04-17 23:51:58 +03:00
Jouni Malinen
200c7693c9 Make WEP functionality an optional build parameter
WEP should not be used for anything anymore. As a step towards removing
it completely, move all WEP related functionality to be within
CONFIG_WEP blocks. This will be included in builds only if CONFIG_WEP=y
is explicitly set in build configuration.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-02-29 17:45:25 +02:00
Jouni Malinen
f0825655c4 tests: Make TDLS tests more robust
Wait for hostapd to report connection completion before performing
connectivity test to avoid race conditions especially with UML
time-travel.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-12-26 11:41:01 +02:00
Jouni Malinen
e01a492caa tests: Helper function for DISCONNECT + ABORT_SCAN + wait
Use a helper function to perform this common sequence to disconnect and
stop any possibly started reconnection attempt.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-03-17 17:58:33 +02:00
Jouni Malinen
fab49f6145 tests: Python coding style cleanup (pylint3 bad-whitespace)
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-03-16 18:52:09 +02:00
Jouni Malinen
64766a7783 tests: Make TDLS test case scan clearing more robust
There was a race condition on starting the flush_scan_cache() operations
if a scan happened to be in progress when the test case ended since the
ABORT_SCAN success case did not wait for the pending scan operation to
be completed. Wait for the scan completion event in addition to the
disconnection event if the ABORT_SCAN command is accepted.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-03-13 23:33:21 +02:00
Jouni Malinen
32e4ad4433 tests: Decode station dump output to restore pre-python3 behavior
These TDLS test cases missed Popen() result decode() calls in the
earlier python3 compatibility changes. Add those to make debug log more
readable.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-03-13 20:40:31 +02:00
Masashi Honma
bab493b904 tests: Use python3 compatible "except" statement
This patch is made by using 2to3 command.

$ find . -name *.py | xargs 2to3 -f except -w -n

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2019-01-26 12:11:35 +02:00
Jouni Malinen
cd803b6ccd tests: Clear regulatory Beacon hints more robustly in TDLS test cases
The ap_open_tdls_vht* test cases could leave some pending regulatory
Beacon hints waiting to be cleared during the following test case. This
would result in a failure if the following test case expected specific
regdom event behavior. For example, this caused "ap_open_tdls_vht160
dbus_country" sequence to result in failure in dbus_country. Fix this by
using more robust sequence in clearing regdom state at the end of the
TDLS test cases that have the AP advertising a country code.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-12-29 17:02:54 +02:00
Jouni Malinen
951fc8df34 tests: Double TPK M2 during TDLS setup initiation
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-21 00:49:17 +02:00
Jouni Malinen
f241a2604a tests: TDLS_CHAN_SWITCH error case
Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-08 17:16:01 +02:00
Jouni Malinen
c1c938335e tests: TDLS and tdls_external_control
Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-08 17:12:55 +02:00
Jouni Malinen
8618b3c221 tests: Open AP and TDLS prohibited
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-29 00:28:17 +03:00
Jouni Malinen
bc6e32880f tests: Remove extra semicolons from python scripts
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-03 22:37:01 +03:00
Jonathan Afek
9fd6804d61 tests: Mark 525 tests as remote compatible
After successfully passing the 525 tests on a remote setup mark the
tests as remote compatible.

Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
2016-06-27 21:47:37 +03:00
Jonathan Afek
cbd4e92ba1 tests: Add the forgotten wlantest_setup() call to a TDLS test
One TDLS test case was using wlantest without doing the setup first.
This makes the test not work on real hardware. Fix the issue by adding
the wlantest setup to the test.

Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
2016-06-27 21:10:35 +03:00
Jonathan Afek
f8b9e61ef0 tests: Initialize hapd variable before try-finally uses
Some TDLS and WPS test cases reference the hapd variable in the finally
block even if the test failed before assigning the value to this
variable. This makes the code in the finally block to fail on
referencing this variable. Assign None to the hapd variable before
starting the tests to avoid this.

Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
2016-06-27 19:04:15 +03:00
Jonathan Afek
8efc83d4e7 tests: Add support for wlantest for remote hwsim tests
Use a monitor interface given in the command line that is not also a
station or an AP as a monitor running wlantest on the channel used by
the test. This makes all the tests that use wlantest available for
execution on real hardware on remote hosts.

Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
2016-05-28 16:34:09 +03:00
Janusz Dziedzic
63e6e62f23 tests: Use hapd from hostapd.add_ap() in TDLS
Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-04-24 20:16:29 +03:00
Janusz Dziedzic
4a264a6fa1 tests: Pass full apdev to add_ap() function (5)
Pass the full apdev to the add_ap() function instead of just ifname.
This allows us to handle also remote hosts while we can check
apdev['hostname'], apdev['port'].

This step (5) converts the cases that use the start_ap_wpa2_psk() helper
function.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-04-03 22:46:14 +03:00
Janusz Dziedzic
8b8a1864ff tests: Pass full apdev to add_ap() function (1)
Pass the full apdev to the add_ap() function instead of just ifname.
This allows us to handle also remote hosts while we can check
apdev['hostname'], apdev['port'].

This step (1) converts the cases where apdev[#]['ifname'] was used as
the argument to hostapd.add_ap().

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-04-03 22:45:57 +03:00
Jouni Malinen
d386a9ace8 tests: TDLS with VHT 80, 80+80, and 160
This adds more coverage for TDLS testing for a case where the direct
link should use various VHT channel bandwidths.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-17 21:20:02 +02:00
Jouni Malinen
a1eabc74b8 tests: Skip WPA(V1) test cases in FIPS mode
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-02 16:52:56 +03:00
Oren Givon
2380d80493 tests: TDLS link status test
Add a test case for checking TDLS link status.

Signed-off-by: Oren Givon <oren.givon@intel.com>
2015-05-03 17:24:38 +03:00
Jouni Malinen
c4668009d0 tests: Remove unnecessary use of sudo from test cases
run-tests.py is running as root, so sudo does not need to be used
anymore from within each test case.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-07 15:37:13 +02:00
Jouni Malinen
81e787b750 tests: Convert test skipping to use exception
Instead of returning "skip" from the test function, raise the new
HwsimSkip exception to indicate a test case was skipped.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-08 22:43:47 +02:00
Jouni Malinen
5434f07c20 tests: TDLS channel switching
Verify correct behavior with invalid commands. In addition, allow minor
mac80211_hwsim modifications to be used to enable testing of the driver
interface to enable and disable channel switching.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-04 21:46:38 +02:00
Jouni Malinen
8916857da6 tests: TDLS with VHT
This adds some more coverage, but the TDLS setup is not for VHT due to
missing support in mac80211.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 18:44:48 +02:00
Jouni Malinen
7fd5fd03ac tests: TDLS teardown using wildcard address
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-05 16:56:14 +02:00
Jouni Malinen
1131a1c8d2 tests: Replace last remaining hwsim_test uses with DATA_TEST
External tool is not needed anymore to run the data connectivity tests
since hostapd test mode now allows the possible bridge or VLAN interface
to be specified.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-27 14:09:07 +02:00
Jouni Malinen
a8375c94c0 tests: Pass wpas/hapd instance to test_connectivity()
This makes it easier to replace data connectivity testing to use
something else than local hwsim_test binary on the controller device.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-19 17:54:49 +03:00
Jouni Malinen
c4a8c173b8 Revert "tests: Skip ap_wpa2_tdls_concurrent_init on failure"
This reverts commit bf700cc3d2. The
concurrent initialization test case is now expected to work again with
the STA entry added early enough to avoid the recently added mac80211
validation step failure.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-03 11:53:38 +03:00
Arik Nemtsov
77835ae9dd tests: Verify TDLS responder teardown in encrypted network
Older mac80211 implementations did not set the link identifier
appropriately, resulting in an incorrect teardown packet being sent the
peer. wpa_supplicant adds the FTE containing the MIC field calculated
using the correct link-identifier. This causes a MIC failure on the
other side and the teardown is discarded. Verify this case is fixed by
newer kernel and wpa_supplicant code.

Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
2014-10-03 11:53:31 +03:00
Jouni Malinen
bf700cc3d2 tests: Skip ap_wpa2_tdls_concurrent_init on failure
A mac80211 TDLS validation change ended up breaking test functionality
that was needed for this test case. Instead of reporting this known
issue as a FAIL every time, mark the test as SKIP since the issues is
known and there are no plans of "fixing" it.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-09-27 11:30:56 +03:00
Jouni Malinen
67935bc3a5 tests: FTIE MIC mismatch in TDLS Setup Response/Confirm
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-05 20:42:12 +03:00
Jouni Malinen
538da4f4d2 tests: TDLS setup failure due to BSSID mismatch
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-05 20:42:12 +03:00
Jouni Malinen
77b4a71180 tests: TDLS discovery
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-16 00:03:07 +02:00
Jouni Malinen
5be9dcbb86 tests: Remove unnecessary interpreter line from most python files
Only run-tests.py is actually executed, so there is no need to specify
the interpreter in all the helper files and test script files.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-21 20:21:53 +02:00
Jouni Malinen
c65f23ab64 tests: Use single channel scans to speed up test cases
A full scan in these specific test cases does not add anything to the
coverage, so use a single channel scan for the station connection to
remove undesired extra time needed for a full scan.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-02 11:22:16 +02:00
Jouni Malinen
c9aa430896 tests: Split run-tests.py logger info into per test case files
The run-tests.py -l argument does not take an argument value anymore.
Instead, debug output is directed to a separate file <test>.log for each
test case.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-31 12:51:08 +02:00
Jouni Malinen
9d86f37f78 tests: Validate AP connection in each TDLS step
Make sure the connection between each STA and the AP is in working state
between each TDLS setup/teardown operation.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-07-31 13:38:34 +03:00
Jouni Malinen
ec9589fdac tests: Pass apdev instead of bssid to TDLS functions
This makes it easier to add new validation steps into TDLS setup and
teardown processes.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-07-31 13:27:41 +03:00
Jouni Malinen
ae3ad3284a tests: Pass AP devices to test cases
This removes hardcoded assumptions about AP interfaces from test_*.py.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-31 18:05:31 +03:00
Jouni Malinen
835a546b20 tests: Add test cases for PMF
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-30 13:47:22 +02:00
Jouni Malinen
8bc0799b93 tests: Use the ap_ifname variable instead of hardcoding ifname
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-30 10:31:18 +02:00
Jouni Malinen
894541ea9c tests: Get rid of the unnecessary add_tests() functions
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-29 21:03:55 +02:00
Jouni Malinen
b61e418c35 tests: Add helper functions for connection to an AP
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-29 20:41:57 +02:00
Jouni Malinen
e259d186cf tests: Add helper functions for starting hostapd AP
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-29 20:33:25 +02:00
Jouni Malinen
0165c4be10 tests: Add TDLS test cases for WEP and open network
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-29 19:15:43 +02:00
Jouni Malinen
e492837b67 tests: Add TDLS test cases with WPA-PSK and WPA+WPA2-PSK
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-29 18:51:48 +02:00