Commit graph

2065 commits

Author SHA1 Message Date
Jouni Malinen
77e4e85321 P2P: Mark peer authorized for persistent group invitation
When p2p_invite persistent=<id> is used to request a persistent group to
be re-invoked, the peer may reply with status=1 (info not yet available)
if upper layer processing of the invitiation is requested. The peer is
ten expected to start another invitation exchanged within 120 seconds if
the user authorizes the connection. Allow this process to be used more
easily by automatically authorizing the peer that we tried to invite to
use this second invitation sequence even if persistent_reconnect=0.

For this mechanism to work, the device that starts the invitation needs
to start listen mode to be able to receive the invitation request from
the peer. At least for now, this is not done automatically, but future
changes could potentially enable this automatically at least if there
are no concurrent operations in progress.

Example sequence on the initiator:

cmd: P2P_INVITE persistent=1 peer=<addr>
event: P2P-INVITATION-RESULT status=1
cmd: P2P_LISTEN 120
wait for peer to start another invitiation round.. group will be
re-invoked automatically

On the peer (with persistent_reconnect=0):

event: P2P-INVITATION-RECEIVED sa=<addr> persistent=1 [freq=<MHz>]
wait for user approval
cmd: P2P_INVITE persistent=1 peer=<addr>
group will be re-invoked automatically

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-03-01 21:32:33 +02:00
Jouni Malinen
cd1e2309a2 P2P: Indicate frequency for upper layer invitation processing
When a device that is a GO in a persistent group receives an Invitation
Request from a P2P client and persistent_reconnect=0, upper layer is
notified of this with P2P-INVITATION-RECEIVED event. The upper layer is
supposed to run another invitation exchange is this case, but if that
does not happen and the GO is started without successful (status=0)
invitation exchange, the operating channel for the group may end up
getting set in a way that the P2P client is not able to support. Provide
optional freq parameter in the P2P-INVITATION-RECEIVED event on the GO
side. If this parameter is received and the upper layer decides to issue
P2P_GROUP_ADD command, that command should include this freq parameter
to make sure the operating channel gets selected from the set that the
peer can support.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-03-01 21:27:31 +02:00
Jouni Malinen
18206e02c5 Allow wpa_supplicant AP mode to configure Beacon interval
beacon_int (in TU) can now be used to configure Beacon interval for AP
mode operations (including P2P GO) in wpa_supplicant. This can be set
either in a network block or as a global parameter in the configuration
file (or with "SET beacon_int <value>" control interface command) to
apply for all networks that do not include the beacon_int parameter to
override the default.

In addition, this commits extends the dtim_period parameter to be
available as a global parameter to set the default value. dtim_period is
now stored in the configuration file, too, if it was set.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-03-01 20:50:08 +02:00
Jouni Malinen
5473362458 P2P: Use peer's channel list to limit GO freq on invitation
Peer device includes its list of allowed operating channels in the
Invitation Response frame. When we are becoming the GO, use that list
from the peer to filter out acceptable channels to avoid selecting a
channel that the peer is unable to use.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-03-01 20:01:01 +02:00
Jouni Malinen
f5877af01e P2P: Allow P2P client to specify preferred group channel
When re-invoking a persistent group in P2P client role, the new
pref=<MHz> parameter can now be used with the p2p_invite command to
indicate a preferred operating frequency. Unlike the older freq=<MHz>
parameter, this leaves GO an option to select another channel (from our
supported channels) if the GO cannot accept the channel.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-03-01 19:40:54 +02:00
Jouni Malinen
5de4b72177 P2P: Use shared function for setting up frequencies
p2p_connect() and p2p_invite() cases used more or less identical
implementatin. Use a shared function to avoid duplicated code.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-03-01 18:40:39 +02:00
Deepthi Gowri
79879f4ae8 P2P: Allow all channels in case of multi channel concurrency
If multi channel concurrency is supported, we have to populate the
p2p_channels with list of channels that we support. Use the same design
that was previously added for GO Negotiation.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-03-01 18:40:39 +02:00
Jouni Malinen
ff48691368 Avoid partial BSS entries in control interface
Most of the print_bss_info() cases were already returning zero lenth to
avoid returning partial returns to the BSS commands, but the HS 2.0 and
Wi-Fi Display entries behaved differently. Make those consistent with
rest of the items.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-28 18:49:33 +02:00
Dmitry Shmidt
cfd42c94ee Mark last BSS entry by #### instead of ====
This allows ctrl_iface users to iterate through the BSS entries by
fetching multiple BSS entries with "BSS RANGE=N-" without having to use
one extra round to get empty return value as the indication of the last
entry having been found.

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2013-02-28 18:46:06 +02:00
Dmitry Shmidt
c667342933 Add WPA_BSS_MASK_DELIM flag to BSS command
This flag will add ==== delimiter between to separate bss results.
Unlike the other BSS command MASK values, this delimiter is not
included by default to avoid issues with existing users of the BSS
command.

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2013-02-28 18:43:05 +02:00
Masashi Honma
5e24beae02 Use scan results for reconnection
This patch uses existing scan results for fast connection on REASSOCIATE
and RECONNECT commands.

Signed-hostap: Masashi Honma <masashi.honma@gmail.com>
2013-02-28 16:34:08 +02:00
Masashi Honma
ad5dda8222 Interworking: Remove unused variable warnings
This patch removes these warnings.

interworking.c: In function 'interworking_credentials_available_3gpp':
interworking.c:1330:6: warning: unused variable 'ret' [-Wunused-variable]
interworking.c:1329:19: warning: unused variable 'cred' [-Wunused-variable]

Signed-hostap: Masashi Honma <masashi.honma@gmail.com>
2013-02-28 16:34:06 +02:00
Jouni Malinen
aec309c407 wpa_cli: Increase receive buffer from 2048 to 4096 bytes
wpa_supplicant uses 4096 byte buffer for control interface responses, so
wpa_cli should do the same to avoid truncating responses unnecessarily.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-27 15:59:55 +02:00
Sunil Dutt
f8361e3d68 TDLS: Pass peer's VHT Capability information during sta_add
The information of the peer's VHT capability is required for the
driver to establish a TDLS link in VHT mode with a compatible peer.
Pass this information to the driver when the peer station is
getting added.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-25 10:31:50 +02:00
Jouni Malinen
f23ce1f032 WPS: Add AP mode NFC connection handover with wpa_supplicant/nfcpy
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-24 10:57:06 +02:00
Jouni Malinen
f3f2ba2e6e WPS NFC: Add connection handover support for ER
wpa_supplicant can now generate the WPS carrier record for connection
handover response when acting as an ER. The AP whose configuration is
provided in this way is identified with an UUID as an argument to
wps-nfc.py.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-24 10:56:29 +02:00
Jouni Malinen
c39fdb8529 WPS: Add wps-er-config command for writing config token from ER
UUID of the AP is specified on the command line to select which
configuration is used.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-24 10:54:18 +02:00
Jouni Malinen
b618a469c4 Interworking: Select highest priority cred if multiple matches
Previously, the credential to use for a connection with a specific BSS
was picked arbitrary based on first found match of each matching
mechanism. While the credential priorities were used elsewhere, this did
not take into account that different mechanisms could find multiple
matching credentials. As such, the highest priority credential was not
always used in case more than one credential matched with the selected
BSS. Fix this by checking credential priorities again during connection
request.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-16 19:57:35 +02:00
Jouni Malinen
87470ea298 WPS: Fix build without CONFIG_WPS_NFC
Commit bbf41865c9 added calls to functions
that are only defined if CONFIG_WPS_NFC=y. Protect those calls properly
to avoid build issues.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-15 17:09:24 +02:00
Jouni Malinen
5ab9a6a53e WPS: Add support for NFC handover select generation with wpa_supplicant
When wpa_supplicant is controlling an AP mode interface, it can generate
the alternative carrier record for NFC connection handover select
message similarly to the way this is done in hostapd.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-15 12:34:55 +02:00
Jouni Malinen
7bfe27778b WPS: Update NFC connection handover documentation
The last couple of changes to the control interface commands for NFC
connection handover had not yet been documented.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-15 11:51:28 +02:00
Jouni Malinen
bbf41865c9 WPS: Add support for config token generation with wpa_supplicant
When wpa_supplicant is controlling an AP mode interface, it can generate
the NFC configuration token similarly to the way this is done in
hostapd.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-15 11:47:52 +02:00
Jouni Malinen
23ffcaf172 WPS: Allow password token to be written with nfcpy
This adds write-password option for the nfcpy example script for
wpa_supplicant to match hostapd wps-ap-nfc.py functionality.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-15 11:34:13 +02:00
Jouni Malinen
042ec551d4 WPS: Use pre-configured NFC password token instead of overriding it
"WPS_NFC_TOKEN <WPS/NDEF>" used to generate a new NFC password token
regardless of whether there was a pre-configured token in the
configuration. Change this to use the pre-configured value, if
available, instead. This allows the same command to be used to write the
password token to an NFC tag more conveniently.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-15 11:24:29 +02:00
Sunil Dutt
d16531c40c TDLS: Pass peer's Capability and Ext Capability info during sta_add
The contents of the peer's capability and extended capability
information is required for the driver to perform TDLS P-UAPSD and Off
Channel operations. Pass this information to the driver when the peer
station is getting added.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-14 21:02:34 +02:00
Sunil Dutt
189206dddb Android: Enable TDLS support in the build
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-14 21:01:54 +02:00
Sunil Dutt
ff4178d57c TDLS: Pass peer's HT Capability and QOS information during sta_add
The information of the peer's HT capability and the QOS information is
required for the driver to perform TDLS operations. Pass this
information to the driver when the peer station is getting added.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-14 21:01:50 +02:00
Jouni Malinen
b8df43dec6 TDLS: Fix add/set STA operation
Commit a9a1d0f08a added vht_capabilities
to struct hostapd_sta_add_params but forgot to update
wpa_supplicant_tdls_peer_addset() to initialize the variable to NULL.
This could result in uninitialized pointer being used in
driver_nl80211.c when adding a TDLS peer entry. Fix this by clearing the
hostapd_sta_add_params with memset.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-14 21:01:07 +02:00
Sunil Dutt
7b44ff2c21 TDLS: Tear down peers when disconnecting from the AP
A TDLS Teardown frame with Reason Code 3 (Deauthenticated because
sending STA is leaving (or has left) IBSS or ESS) shall be transmitted
to all TDLS peer STAs (via the AP or via the direct path) prior to
transmitting a Disassociation frame or a Deauthentication frame to the
AP.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-13 01:19:44 +02:00
Jouni Malinen
c5f10e804a Use more accurate timestamps for scan results
For various P2P use cases, it is useful to have more accurate timestamp
for the peer information update. This commit improves scan result
handling by using a single timestamp that is taken immediately after
fetching the results from the driver and then using that value to
calculate the time when the driver last updated the BSS entry. In
addition, more debug information is added for P2P peer updates to be
able to clearly see how old information is being used here.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-12 19:14:32 +02:00
Jouni Malinen
e47588279a WPS: Report NFC connection handover completion differently
Instead of reporting only one connection handover message, report
completion of NFC connection handover with carrier record from both the
request and select messages.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-11 18:43:46 +02:00
Jouni Malinen
ec01d5f6b0 P2P: Avoid concurrent scans during all steps of group formation
Previously, only some P2P states were considered to postpone concurrent
station mode scans during group formation. Especially the WPS
provisioning step was skipped due to issues to scans run on the P2P
client interface (see commit fc6997b345).
This is not ideal since a concurrent scan can slow down group formation
considerably and potentially make it time out. Enforce p2p-in-progress
through all steps of group formation on another interface to address
this.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-11 12:21:03 +02:00
Jouni Malinen
77dfafd07d P2P: Cancel group formation timeout on group removal (on client)
Group formation timeout is normally canceled when 4-way handshake is
completed (WPA_COMPLETED -> wpas_p2p_completed). However, it is possible
for the GO to stop the group before this happens (i.e., send
Deauthentication frame with reason code 3 before 4-way handshake is
completed). This resulted in the group getting removed, but the group
formation timeout left behind. The unexpected timeout may then result in
undesired termination of the following operation. Fix this by canceling
the group formation timeout in wpas_p2p_group_delete() similarly to how
group idle timeout was canceled there.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-10 23:36:52 +02:00
Jouni Malinen
bd692a8b0e WPS: Change listen time to match nfcpy default (250 ms)
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-02-10 18:49:20 +02:00
Jouni Malinen
b8dbc5d689 WPS: Report only the carrier record from NFC to wpa_supplicant
Since there could be multiple carrier records, it is cleaner to report
only the WPS carrier record instead of full NFC connection handover
select to wpa_supplicant.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-02-10 18:42:43 +02:00
Jouni Malinen
bbaaaee171 WPS: Fetch only the carrier record from wpa_supplicant for NFC
Since there could be multiple carrier records, it is cleaner to build
only the WPS carrier record instead of full NFC connection handover
request within wpa_supplicant.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-02-10 18:19:59 +02:00
Jouni Malinen
cf78e2acc8 WPS: Clean up debug prints with nfcpy
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-02-10 16:27:59 +02:00
Jouni Malinen
8414860422 WPS: Remove 0.5 sec extra wait from NFC handover with nfcpy
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-02-10 16:27:14 +02:00
Jouni Malinen
dc6bda1123 WPS: Use alternating poll/listen for NFC peer discovery with nfcpy
This is needed to find the NFC peer to avoid cases where both devices
could be using the same operation.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-02-10 16:25:20 +02:00
Jouni Malinen
8140ae969b WPS: Configure logging to show nfcpy log message
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-02-10 16:20:25 +02:00
Peter Wu
a24a5ccb28 dbus: Add missing signal description for WPS (7)
Commit caff399250 added a property named
"WPS" to the dbus interface. It did not add the new
WPAS_DBUS_BSS_PROP_WPS property to the function responsible for marking
changed properties though. This cause the following messages to be
printed repeatedly to syslog:

    dbus: wpas_dbus_bss_signal_prop_changed: Unknown Property value 7

Signed-hostap: Peter Wu <lekensteyn@gmail.com>
2013-02-09 12:13:54 +02:00
Jouni Malinen
62cab3b737 eap_proxy: Add a dummy implementation for compilation testing
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-08 11:54:05 +02:00
Deepthi Gowri
bd3ca9d0bf Android: Enable EAP-AKA support in the build
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-08 11:54:03 +02:00
Deepthi Gowri
45f4a97a3a eap_proxy: Add mechanism for allowing EAP methods to be offloaded
In addition to the offload mechanism, the Android configuration and
makefiles are extended to allow this to be configured for the build by
dropping in platform specific configuration files and makefile without
having to modify any existing files.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-08 11:54:01 +02:00
Dmitry Shmidt
66fe0f703c Add 'SCAN TYPE=ONLY' functionality
Usual manual scan request may cause reassociation due to several
reasons. New command is intended to perform pure scan without taking any
automatic action based on the results.

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2013-02-07 18:09:50 +02:00
Vladimir Kondratiev
ff3ad3c531 Capability matching for 60 GHz band
On the DMG (60 GHz) band, capability bits defined differently from
non-DMG ones. Adjust capability matching to cover both cases.

Also, for non-DMG bands, check ESS bit is set.

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
2013-02-07 16:20:18 +02:00
Raja Mani
3140803b6d nl80211: Add ctrl_iface message for AP mode connection rejection
When AP mode operation reject the client, nl80211 layer advertises the
connect failed event with the reason for failures (for example, max
client reached, etc.) using NL80211_CMD_CONN_FAILED.

This patch adds some debug messages whenever such an event is received
from the nl80211 layer and also the same event is posted to the upper
layer via wpa_msg().

Signed-off-by: Raja Mani <rmani@qca.qualcomm.com>
2013-02-07 15:24:53 +02:00
Jouni Malinen
409ca9a84d P2P: Allow local configuration to use 5 GHz band 40 MHz channels
These channels were already enabled for P2P use, but the local
configuration parameter was not allowed to use the operating class in
which the 40 MHz channels are specified.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-07 12:51:17 +02:00
Amar Singhal
9f42d49c55 Fix BSS RANGE command for no exact id match cases
The RANGE=N1-N2 command did not return any entries in some cases where
N1 does not match with any BSS entry. Fix this by allow entries to be
fetched even without knowing the exact id values.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-07 12:27:52 +02:00
Amar Singhal
cc03d0fef3 Add "BSS LAST ..." command
Add the "BSS LAST ..." command. This command helps in fetching the scan
entries iteratively from FIRST entry to LAST entry by ID.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-06 00:31:34 +02:00