Commit graph

963 commits

Author SHA1 Message Date
Jouni Malinen
3e7533b399 WPS ER: Show SetSelectedRegistrar events as ctrl_iface events
This makes it easier to figure out if something goes wrong in
preparing the AP for enrolling a station.
2010-10-25 21:29:22 +03:00
Jouni Malinen
c973f3868a P2P: Remove P2P group on driver resource becoming unavailable
Add a new driver event, EVENT_INTERFACE_UNAVAILABLE, for indicating
that the driver is not able to continue operating the virtual
interface in its current mode anymore, e.g., due to operating
channel for GO interface forced to a DFS channel by another virtual
interface.

When this happens for a P2P group interface, the P2P group will
be terminated and P2P-GROUP-REMOVED event shows the reason for
this as follows:
P2P-GROUP-REMOVED wlan0 GO reason=UNAVAILABLE
2010-10-25 19:16:11 +03:00
Jouni Malinen
129eb428b1 WPS: Fix wps_reg command documentation to require BSSID
Replacing the BSSID with 'any' has never worked with wps_reg
command, so better not claim it could work. In addition, reject
this is wpa_supplicant to make it clearer that the operation
fails.
2010-10-25 18:56:49 +03:00
Jouni Malinen
3071e18109 P2P: Add mechanism for timing out idle groups
A new configuration parameter, p2p_group_idle, can now be used to set
idle timeout value for P2P groups in seconds (0 = no timeout). If set,
this values is used to remove P2P group (both GO and P2P client)
interfaces after the group has been idle (no clients/GO seen) for the
configuration duration.

The P2P-GROUP-REMOVED event is now indicating the reason for group
removal when known. For example:
P2P-GROUP-REMOVED wlan0 GO reason=REQUESTED
P2P-GROUP-REMOVED wlan1 client reason=IDLE
2010-10-25 18:24:15 +03:00
Jouni Malinen
f19858f5a8 Show wpa_supplicant version number in the debug log 2010-10-22 11:50:34 +03:00
Jouni Malinen
35c5d61037 Fix crash on channel list changed event during driver init
The driver wrapper may indicate EVENT_CHANNEL_LIST_CHANGED before
completing init(). This would likely result in segfault when driver
channel list is being read as part of processing this event when
P2P is enabled.
2010-10-20 19:30:55 +03:00
Jouni Malinen
ef10f4733f WPS ER: Add wps_er_set_config to use local configuration
This command can be used to enroll a network based on a local
network configuration block instead of having to (re-)learn the
current AP settings with wps_er_learn.
2010-10-20 13:37:01 +03:00
Jouni Malinen
2af1c18735 P2P: Scan all channels if GO is not found from common channels
This is not supposed to happen, but in theory, the GO may end up
changing its channels at some point. While it would be reasonable
to use one of the common channels, GO may be forced to use another
channel. The most likely reason for this would be if the P2P client
is enforcing only a single channel to be used (e.g., to avoid
multi-channel concurrent operations).
2010-10-19 18:38:49 +03:00
Jouni Malinen
3f4ce13fde P2P: Track non-P2P members in the group and set Group Limit bit
The P2P group component is now tracking of associated stations
in the group and the Group Limit bit in the Group Capabilities
is updated based on whether there is room for new clients in
the group.
2010-10-19 18:10:28 +03:00
Jouni Malinen
de979d8fc7 Fix max_stations to apply to associated STAs, not P2P peers
This driver capability limit was supposed to indicate limit on
how many stations can associate with us in the AP mode, not how
many P2P peers are stored in the peer table.
2010-10-19 17:17:04 +03:00
Jouni Malinen
dae608d5d3 Add max_num_sta config option for wpa_supplicant AP mode
This can be used to limit the number of stations allowed to be
connected to the AP.
2010-10-19 17:08:20 +03:00
Jouni Malinen
59eba7a2b3 P2P: Add p2p_cancel command for cancelling ongoing group formation 2010-10-19 15:53:28 +03:00
Jouni Malinen
93b7ddd032 P2P: Skip GO Neg Conf ack failure workaround of send failures
The workaround to ignore no ctrl::ack received for GO Negotiation
Confirmation frame was only supposed to be used when the frame was
actually transmitted and just the ack was not received. However, due
to the way the driver failure on transmitting the frame were reported,
this ended up getting applied for all failures in sending the GO
Negotiation Confirmation frame.

Improve this by providing a mechanism to indicate whether send_action
operations fail locally before the frame was actually transmitted or
because of not receiving ack frame after having transmitted the frame.
2010-10-19 12:47:33 +03:00
Jouni Malinen
d75e880696 P2P: Try to re-create group interface if pending one is not available
This is needed to work around cases where the pending interface gets
removed, e.g., due to failed GO Negotiation. In such case, we may still
accept new GO Negotiation to be completed, but the interface did not
get created without a separate p2p_connect command.

The current implementation is not ideal since the re-created interface
may, at least in theory, get incorrect interface addrees. Though, this
would likely require that the driver supported more than one P2P group
interface and that the previous one was already taken into use for
another group.
2010-10-18 17:00:50 +03:00
Jouni Malinen
092acb5441 WPS: Add virtual flags in Config Methods for WPS 2.0 if needed
This is a workaround for incorrect configuration (missing
virtual/physical identifier for config methods) for WPS 2.0 to
allow unmodified configuration from WPS 1.0 to be used while
enforcing compliant WPS 2.0 values.
2010-10-16 12:57:47 +03:00
Jouni Malinen
b5c9da8db3 P2P: Add mechanism for updating P2P channel list based on driver events
This allows P2P channel list to be updated whenever the driver changes
its list of allowed channels, e.g., based on country code from scan
results.
2010-10-15 18:55:22 +03:00
Jouni Malinen
ac8d1011b7 P2P: Set channel list per channel instead of per band
This makes the channel list match with driver capabilities without
having to do workaround like disabling channels 12-14.
2010-10-15 18:51:37 +03:00
Jouni Malinen
4ae4650b4c P2P: Verify that forced channel is suitable for autonomous GO 2010-10-15 18:48:06 +03:00
Anil Gathala Sudha
a0dee79709 P2P: Send AP mode WPS-FAIL event to parent interface
The AP operation with wpa_supplicant requires an additional callback
to get the needed event information from hostapd side so that
wpa_msg() can be called for wpa_s->parent if needed.
2010-10-14 20:57:00 +03:00
Jouni Malinen
545cc6af25 P2P: Send WPS-FAIL event to parent interface, too
This makes it easier to figure out what went wrong during group
formation when per-group interfaces are used.
2010-10-14 20:52:31 +03:00
Jouni Malinen
81611b95ff WPS: Add Config Error into WPS-FAIL events
This makes it easier to figure out what could have failed in the
WPS protocol and potentially provide more information for the
user on how to resolve the issue.
2010-10-14 20:49:54 +03:00
Jouni Malinen
d054a4622c P2P: Reject multi-channel concurrent operations depending on driver
The driver wrapper can now indicate whether the driver supports
concurrent operations on multiple channels (e.g., infra STA connection
on 5 GHz channel 36 and P2P group on 2.4 GHz channel 1). If not,
P2P_CONNECT commands will be rejected if they would require
multi-channel concurrency.

The new failure codes for P2P_CONNECT:

FAIL-CHANNEL-UNAVAILABLE:
The requested/needed channel is not currently available (i.e., user has
an option of disconnecting another interface to make the channel
available).

FAIL-CHANNEL-UNSUPPORTED:
The request channel is not available for P2P.
2010-10-14 14:24:56 +03:00
Paul Stewart
174fa7898e bgscan: Add new channel condition parameters to signal change events
bgscan modules can potentially get a richer feel for the channel
condition and make better choices about scan/no-scan and roam/no-roam.
2010-10-12 20:03:36 +03:00
Jouni Malinen
3b29972c09 P2P: Limit p2p_connect .. pbc join based on BSSID
Allow only the expected P2P Interface Address as the BSSID for
the AP to avoid selecting incorrect BSS should there be another
device that is advertising active PBC mode before the target
P2P GO does.
2010-10-12 16:56:17 +03:00
Johannes Berg
6cb22d2fd1 P2P: Fix remain-on-channel abort race
When the P2P state machine requests a remain- on-channel, there's a
potential race where it can then request a stop before the r-o-c has
actually started, in which case the stop will not be processed. Fix
that.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2010-10-10 17:52:13 +03:00
Paul Stewart
8ee69e0633 dbus_new_handlers: Don't send NULL to dbus_message_new_error
The new DBus API helper function wpas_dbus_error_unknown_error
function can be called as a result of a failure within internal
getter calls, which will call this function with a NULL message
parameter.  However, dbus_message_new_error looks very unkindly
(i.e, abort()) on a NULL message, so in this case, we should not
call it.

I've observed this course of events during a call to
wpas_dbus_getter_bss_wpa with a faileld parse of the IE parameter.
We got here through a call to fill_dict_with_properties which
explicitly calls getters with a NULL message parameter.  Judging
from the way it is called, this could easily occur if an AP sends
out a malformed (or mis-received) probe response.  I usually run
into this problem while driving through San Francisco, so I'm
exposed to any number of base stations along this path.
2010-10-09 17:29:51 +03:00
Daniel Kurtz
556522ee09 dbus: Treat '' in SSIDs of Interface.Scan as a request for broadcast scan
This patch changes wpa_supplicant policy for handling '' in SSIDs field of
Interface.SSID DBus message. It treats '' (zero-length) SSID as a request
for a broadcast scan, instead of ignoring it.

This patch updates DBus API .Scan() logic per the test cases listed below:

1) Interface.Scan({'Type':'active', 'Channel':(2412, 20)})
   Request:     Active scan with only '' SSID (1 channel)
   Should be:   1 broadcast ProbeRequest on specified channel
   Previous:    1 broadcast ProbeRequest on specified channel
   This Patch:  1 broadcast ProbeRequest on specified channel

2) Interface.Scan({'Type':'active', 'Channel':(2412, 20), 'SSIDs':['']})
   Request:     Active scan with only '' SSID (1 channel)
   Should be:   1 broadcast ProbeRequest on specified channel
   Previous:    No ProbeRequests; passive scan results for specified channel
   This Patch:  FIXED: 1 broadcast ProbeRequest on specified channel

3) Interface.Scan({'Type':'active', 'Channel':(2412, 20), 'SSIDs':['MySSID']})
   Request:     Active scan with only non-'' SSIDs (1 channel)
   Should be:   1 directed ProbeRequest for each SSID on specified channel,
	no broadcast ProbeRequest
   Previous:    1 directed ProbeRequest for each SSID on specified channel,
	no broadcast ProbeRequest
   This Patch:  1 directed ProbeRequest for each SSID on specified channel,
	no broadcast ProbeRequest

4) Interface.Scan({'Type':'active', 'Channel':(2412, 20), 'SSIDs':['',
	'MySSID']})
   Request:     Active scan with SSIDs, including 1 '' SSID (1 channel)
   Should be:   1 broadcast ProbeRequest, 1 directed ProbeRequest for each
	non-'' SSID on specified channel
   Previous:    1 directed ProbeRequest for each non-'' SSID on specified
	channel
   This Patch:  FIXED: 1 broadcast ProbeRequest, 1 directed ProbeRequest for
	each non-'' SSID on specified channel
2010-10-09 16:27:53 +03:00
Daniel Kurtz
a7af023b84 dbus: Fix passive/active scans in some cases
Currently the DBus Interface.Scan API is counter-intuitive. It issues
ProbeRequests when doing passive scans when channels are specified, and
does not issue ProbeRequests for broadcast active scans.

This patch updates DBus API .Scan() logic per the test cases listed below:

 1) Interface.Scan({'Type':'passive'})
    Request:     Passive scan (all channels)
    Should be:   No ProbeRequests; Passive Scan results for all channels
    Previous:    1 ProbeRequest on all channels for both broadcast SSID and
	selected network (scan_ssid=1)
    This Patch:  --No change--: 1 ProbeRequest on all channels for both
	broadcast SSID and selected network (scan_ssid=1)

 2) Interface.Scan({'Type':'passive', 'Channel':(2412, 20)})
    Request:     Passive scan (1 channel)
    Should be:   No ProbeRequests; Passive Scan results for 1 channel
	(plus overlapping channels)
    Previous:    1 broadcast ProbeRequest on specified channel
    This Patch:  --Fixed--: No ProbeRequests; Passive Scan results for 1
	channel (plus overlapping channels)

 3) Interface.Scan({'Type':'active'})
    Request:     Active scan with no SSIDs (all channels)
    Should be:   1 broadcast ProbeRequest on all channels
    Previous:    No ProbeRequests;  passive scan results for all channels
    This Patch:  --Fixed--: 1 broadcast ProbeRequest on all channels

 4) Interface.Scan({'Type':'active', 'Channel':(2412, 20)})
    Request:     Active scan with no SSIDs (1 channel)
    Should be:   1 broadcast ProbeRequest on specified channel
    Previous:    No ProbeRequests; Passive scan results for specified
	channel (plus overlapping channels)
    This Patch:  --Fixed--: 1 broadcast ProbeRequest on specified channel
2010-10-09 16:22:39 +03:00
Jouni Malinen
01cf713e51 Fix .gitignore files to not ignore subdirectory matches
The previous used .gitignore files were mathing some files that
were actually already in the repository (e.g.,
hostapd/logwatch/hostapd). Avoid this by listing the conflicting
entries in the root directory .gitignore with full path.
2010-10-07 11:04:16 +03:00
Ben Greear
199716adb3 Fix wpa_supplicant build without CONFIG_WPS and CONFIG_AP 2010-10-07 10:41:58 +03:00
Johannes Berg
9919f7a22b Fix AP mode in wpa_supplicant with interface events
Needs to not trigger a scan here when the AP mode setup sets
interface down/up.
2010-10-06 17:10:07 +03:00
Jouni Malinen
d9c8a7c44c Fix build with CONFIG_WPS_OOB 2010-10-06 16:40:20 +03:00
Jouni Malinen
235f69fcd6 Mark ctrl_iface RX debug for PING commands excessive
This cleans up debug log from unnecessary entries when using
wpa_cli/hostapd_cli or other ctrl_iface monitors that PING
periodically to check connectivity.
2010-09-24 15:50:13 -07:00
Jouni Malinen
95ee81e4e7 WPS: Documented wps_er_pin MAC address option 2010-09-24 15:44:26 -07:00
Jouni Malinen
3981cb3cb8 WPS: Add wps_check_pin command for processing PIN from user input
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
2010-09-23 10:30:52 -07:00
Jouni Malinen
f648bc7d0d WPS: Use blacklist more aggressively during WPS provisioning
This allows more APs to be tried during the WPS timeout.
2010-09-22 11:50:15 -07:00
Jouni Malinen
0e2e565a44 WPS 2.0: Provide (Re)Association Response WPS IE to driver
WPS 2.0 mandates the AP to include WPS IE in (Re)Association Response
if the matching (Re)Association Request included WPS IE. Provide the
needed WPS IE information to the driver_ops API for drivers that
process association frames internally.

Note: This modifies the driver_ops API by adding a new argument to
set_ap_wps_ie().
2010-09-22 10:46:44 -07:00
Jouni Malinen
b4e34f2fdf WPS: Make testing operations configurable at runtime
Instead of build time options (CONFIG_WPS_TESTING_EXTRA_CRED and
CONFIG_WPS_EXTENSIBILITY_TESTING), use a single build option
(CONFIG_WPS_TESTING) and runtime configuration of which testing
operations are enabled. This allows a single binary to be used
for various tests.

The runtime configuration can be done through control interface
with wpa_cli/hostapd_cli commands:
Enable extensibility tests:
set wps_version_number 0x57
Disable extensibility tests (WPS2 build):
set wps_version_number 0x20
Enable extra credential tests:
set wps_testing_dummy_cred 1
Disable extra credential tests:
set wps_testing_dummy_cred 0
2010-09-21 19:51:23 -07:00
Jouni Malinen
9647120b07 WPS: Add more verbose debug info on PBC session overlap detection 2010-09-20 15:08:52 -07:00
Jouni Malinen
ff28ccafd5 WPS: Add BSSID to strict validation error messages
This makes it easier to figure out which AP is sending invalid
Beacon or Probe Response frames.
2010-09-20 14:54:22 -07:00
Jouni Malinen
7736f18bef WPS: Cancel WPS operation on PBC session overlap detection
Previously, wpa_supplicant remaining in scanning state without
trying to connect, but there is no particular need to do that.
Instead, cancel WPS operation completely whenever PBC session
overlap is detected.
2010-09-19 17:04:04 -07:00
Dan Harkins
df684d82ff EAP-pwd: Add support for EAP-pwd server and peer functionality
This adds an initial EAP-pwd (RFC 5931) implementation. For now,
this requires OpenSSL.
2010-09-14 21:51:40 -10:00
Jouni Malinen
ea184114ca Allow auto-connect to request scan in associating state
Disconnection event may be received while in associating state.
Previously, wpa_supplicant could get stuck not trying to reconnect
in that case at least with nl80211. Allow scan request in this
state to avoid the issue. This helps especially with APs that do
load balancing by sending Deauthentication frame as a response to
Reassociation Request frame after successful Authentication frame
exchange.
2010-09-14 00:07:54 -07:00
Sudhakar Swaminathan
0f66abd25b P2P: Add option for disabling intra BSS distribution
p2p_intra_bss configuration parameter can now be used to
disable/enable intra BSS distribution (bridging of frames between
the clients in a group).
2010-09-10 10:30:26 -07:00
Ardong Chen
0d0a8ca1cc Add option for disabling automatic reconnection on disconnection
ctrl_interface STA_AUTOCONNECT command can now be used to disable
automatic reconnection on receiving disconnection event. The default
behavior is for wpa_supplicant to try to reconnect automatically, i.e.,
to maintain previous behavior.
2010-09-10 10:30:26 -07:00
Ardong Chen
2049af2bd5 P2P: Fix invitation_received callback to use NULL bssid (if not known)
Previously, the storage buffer for the Group BSSID was returned
regardless of whether it was included in the invitation or not.
2010-09-10 10:30:26 -07:00
Kuko Li
4c01083400 P2P: Do not process configuration changes on non-P2P interfaces 2010-09-10 10:30:26 -07:00
Jouni Malinen
b73bf0a74b P2P: Stop connection attempt on PBC session overlap
The overlap condition cannot disappear before group formation timeout
hits, so there is no point in continuing in this case and failure can
be indicated immediately.
2010-09-10 10:30:25 -07:00
Jouni Malinen
3094d4837a P2P: Use group formation timeout (but longer one) with join-a-group
This allows the pending group interface to be removed if we fail
to join a running group. A longer than 15 second timeout is needed
here since the GO may not have authorized our connection yet.
2010-09-10 10:30:25 -07:00
Jouni Malinen
ae3e342108 P2P: Add peer timeout into group formation 15 second timeout
This adds some more time for WPS provisioning step in case the peer
takes long time to start group interface operations.
2010-09-10 10:30:25 -07:00