Commit graph

15595 commits

Author SHA1 Message Date
Jouni Malinen
8b138d2826 OWE: PTK derivation workaround in STA mode
Initial OWE implementation used SHA256 when deriving the PTK for all OWE
groups. This was supposed to change to SHA384 for group 20 and SHA512
for group 21. The new owe_ptk_workaround=1 network parameter can be used
to enable older behavior mainly for testing purposes. There is no impact
to group 19 behavior, but if enabled, this will make group 20 and 21
cases use SHA256-based PTK derivation which will not work with the
updated OWE implementation on the AP side.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-24 00:47:41 +02:00
Jouni Malinen
65a44e849a OWE: PTK derivation workaround in AP mode
Initial OWE implementation used SHA256 when deriving the PTK for all OWE
groups. This was supposed to change to SHA384 for group 20 and SHA512
for group 21. The new owe_ptk_workaround parameter can be used to enable
workaround for interoperability with stations that use SHA256 with
groups 20 and 21. By default, only the appropriate hash function is
accepted. When workaround is enabled (owe_ptk_workaround=1), the
appropriate hash function is tried first and if that fails, SHA256-based
PTK derivation is attempted. This workaround can result in reduced
security for groups 20 and 21, but is required for interoperability with
older implementations. There is no impact to group 19 behavior.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-24 00:47:41 +02:00
Jouni Malinen
bd50805e40 OWE: Select KDF hash algorithm based on the length of the prime
Previous implementation was hardcoding use of SHA256 PMK-to-PTK
derivation for all groups. Replace that with hash algorithm selection
based on the length of the prime similarly to the way this was done for
other derivation steps in OWE.

This breaks backwards compatibility when using group 20 or 21; group 19
behavior remains same.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-24 00:47:16 +02:00
Jouni Malinen
10bdce692d Fix a typo in an example configuration file comment
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-24 00:08:12 +02:00
Jouni Malinen
0d445cd394 Fix a typo in a comment
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-24 00:08:10 +02:00
Jouni Malinen
ce26f0086c Fix coloc_intf_reporting config param in hostapd in non-OWE builds
This has nothing to do with OWE and parsing of this value was not
supposed to be within an ifdef CONFIG_OWE block.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-24 00:08:10 +02:00
Jouni Malinen
ca10117cd7 tests: Make ap_hs20_connect_no_full_match more robust
Explicitly clear cfg80211 scan cache to avoid issues with old BSS
entries from previous test cases.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-23 16:54:45 +02:00
Vamsi Krishna
1011c79900 Do not enable HT/VHT for 6 GHz band 20 MHz width channels also
The previous commit had a rebasing issue that ended up covering only the
center_segment0 != 0 case. These were supposed to apply for all 6 GHz
band cases.

Fixes: 0bfc04b8d0 ("Do not enable HT/VHT when operating in 6 GHz band")
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-23 16:10:41 +02:00
Vamsi Krishna
d0e116f61f Enhance get_mode() to return correct hw_mode with 6 GHz support
The 5 GHz channels are stored in one hw_features set with mode
HOSTAPD_MODE_IEEE80211A while the 6 GHz channels will need to be stored
in a separate hw_features set (but with same mode
HOSTAPD_MODE_IEEE80211A) due to possibility of different HT/VHT/HE
capabilities being available between the 5 GHz and 6 GHz bands.

Iterate through all hw_features sets and check and match the band of
channel supported by the hw_features set while getting the hw_features
set in get_mode(). This allows both the 5 GHz and 6 GHz channels to be
found and correct capabilities to be used in cases where the driver
reports different capability values between 5 and 6 GHz channels.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-23 15:48:51 +02:00
Chaitanya Tata
4658eb77d6 Remove deprecated text for ap_scan=0
Users might be tempted to try ap_scan=0 for offloading scan,
ap_selection and, WPA to driver. Update the text to reflect that this is
deprecated.

Jouni confirmed deprecation in
https://www.spinics.net/lists/hostap/msg06482.html

Signed-off-by: Chaitanya Tata <chaitanya.tata@bluwireless.com>
2020-01-21 18:17:07 +02:00
Jouni Malinen
2be278696b tests: Allow more time for sigma_dut sta_associate commands
The previously used timeout of two seconds did not allow more than a
single scan attempt and that could fail every now and then. Make these
more robust by increasing the timeout to 10 seconds which allows another
scan attempt to be completed similarly to the most non-sigma_dut test
cases.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-21 13:22:57 +02:00
Jouni Malinen
5e32fb0170 SAE: Use Anti-Clogging Token Container element with H2E
IEEE P802.11-REVmd was modified to use a container IE for anti-clogging
token whenver H2E is used so that parsing of the SAE Authentication
frames can be simplified.

See this document for more details of the approved changes:
https://mentor.ieee.org/802.11/dcn/19/11-19-2154-02-000m-sae-anti-clogging-token.docx

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-21 13:13:56 +02:00
Jouni Malinen
e36a5894d0 SAE: Use H2E whenever Password Identifier is used
IEEE P802.11-REVmd was modified to require H2E to be used whenever
Password Identifier is used with SAE.

See this document for more details of the approved changes:
https://mentor.ieee.org/802.11/dcn/19/11-19-2154-02-000m-sae-anti-clogging-token.docx

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-21 13:13:56 +02:00
Jouni Malinen
6a673d0fb0 tests: Remove mesh SAE Password Identifier test cases for now
IEEE P802.11-REVmd was modified to require H2E to be used whenever
Password Identifier is used with SAE. Since wpa_supplicant and mac80211
do not yet support SAE H2E in mesh, Password Identifier cannot be used
in mesh cases. Remove the test cases that verified this behavior for now
to allow H2E to be required per updated REVmd definition. These test
cases will be restored once H2E is fully functionality in mesh cases.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-21 13:00:20 +02:00
Jouni Malinen
c56b7a2fdf SAE: Mark sae_derive_pt_ecc() static
This function is not used outside sae.c.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-21 00:35:16 +02:00
Jouni Malinen
6ce883de69 tests: SAE anti clogging (forced, H2E)
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-20 21:17:46 +02:00
Jouni Malinen
29dd0b3164 SAE H2E: Check H2E-only BSS membership selector only if SAE is enabled
This BSS membership selector has impact only for SAE functionality, so
ignore it when configured not to use SAE. This allows WPA-PSK connection
to and AP that advertises WPA-PSK and SAE while requiring H2E for SAE.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-20 21:17:28 +02:00
Johannes Berg
f124367afb tests: parallel-vm: allow running without curses
Allow running without curses, in which case the log is simply written to
stdout instead of a file. This is useful for automated (but parallel)
testing. Note that in most cases, you'd want to specify --debug, and so
I added a .rstrip() there on the lines to clean that up a bit.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-01-20 21:17:24 +02:00
Johannes Berg
4ee5a50358 trace: Handle binutils bfd.h breakage
Some things in bfd.h that we use were renamed, and in the case of
bfd_get_section_vma() a parameter was dropped. Work around this.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-01-20 21:17:21 +02:00
Daniel Golle
fa308a6496 hostapd: Fix a typo in sample configuration
'assocition' -> 'association'

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2020-01-20 19:09:52 +02:00
Jouni Malinen
961eb08723 tests: Flush scan results in more Hotspot 2.0 test cases
This makes testing of INTERWORKING_CONNECT more robust.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-10 22:55:44 +02:00
Jouni Malinen
447ce4813a tests: Opportunistic Wireless Encryption transition mode disabled on STA
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-10 20:37:41 +02:00
Hai Shalom
d20365db17 EAP-SIM/AKA peer: Add support for EAP Method prefix
Add support for EAP method prefix in the anonymous identity
used during EAP-SIM/AKA/AKA' authentication when encrypted IMSI
is used. The prefix is a single character that indicates which
EAP method is required by the client.

Signed-off-by: Hai Shalom <haishalom@google.com>
2020-01-10 19:16:13 +02:00
Jouni Malinen
991e6b9e79 tests: Call stop_sigma_dut() in more failure cases
Some of the sigma_dut test cases were not yet using try/finally to
ensure stop_sigma_dut() gets called. That could result in not logging
all failure reasons in the log and getting stuck with being unable to
start new sigma_dut processes after failed test cases.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-10 00:44:07 +02:00
Jouni Malinen
f0b6b23fe3 tests: Enable sigma_dut debug log for all test cases
There is no point in having to enable this separately for each test case
since the debug details are always useful if something fails.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-10 00:21:15 +02:00
Jouni Malinen
a04c153b9f tests: Verify that sigma_dut is functional after startup
There is no point in continuing the test ase if sigma_dut is not in
functional state.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-10 00:04:43 +02:00
Jouni Malinen
fb0f13fbf8 tests: Log sigma_dut stdout/stderr separately for each command
This makes logs easier to understand and this may also help in running
over buffer space and getting stuck with sigma_dut termination.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-09 23:31:29 +02:00
Vamsi Krishna
4bf78a79d0 ACS: Populate channel config from external ACS per documented behavior
Based on the now documented seg0/seg1 values from offloaded ACS, there
is a mismatch between the driver interface and internal hostapd use.

The value of segment0 field in ACS results is the index of the channel
center frequency for 20 MHz, 40 MHz, and 80M Hz channels. The value is
the center frequency index of the primary 80 MHz segment for 160 MHz and
80+80 MHz channels.

The value of segment1 field in ACS results is zero for 20 MHz, 40 MHz,
and 80 MHz channels. The value is the index of the channel center
frequency for 160 MHz channels and the center frequency index of the
secondary 80 MHz segment for 80+80 MHz channels.

However, in struct hostapd_config, for 160 MHz channels, the value of
the segment0 field is the index of the channel center frequency of 160
MHz channel and the value of the segment1 field is zero. Map the values
from ACS event into hostapd_config fields accordingly.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-09 20:22:12 +02:00
Vamsi Krishna
fe1552d93c ACS: Update documentation of external ACS results event parameters
Update the documentation with values to be sent for seg0 and seg1 fields
in external ACS result event for 20 MHz, 40 MHz, 80 MHz, 160 MHz, and
80+80 MHz channels. These values match the changes done to definitions
of seg0 and seg1 fields in the IEEE 802.11 standard.

This vendor command had not previously been documented in this level of
detail and had not actually been used for the only case that could have
two different interpretation (160 MHz) based on which version of IEEE
802.11 standard is used.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-09 20:12:14 +02:00
Vamsi Krishna
881177201a 6 GHz: Fix Channel Width value for 80+80 in 6 GHZ Operation Info field
The Channel Width field value is 0 for 20 MHz, 1 for 40 MHz, 2 for 80
MHz, and 3 for both 160 MHz and 80+80 MHz channels. The 80+80 MHz case
was not addressed previously correctly since it cannot be derived from
seg0 only.

The Channel Center Frequency Segment 0 field value is the index of
channel center frequency for 20 MHz, 40 MHz, and 80 MHz channels. The
value is the center frequency index of the primary 80 MHz segment for
160 MHz and 80+80 MHz channels.

The Channel Center Frequency Segment 1 field value is zero for 20 MHz,
40 MHz, and 80 MHz channels. The value is the index of the channel
center frequency for 160 MHz channel and the center frequency index of
the secondary 80 MHz segment for 80+80 MHz channels.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-09 17:43:28 +02:00
Jouni Malinen
b4fe37c4fa Silence compiler warning in no-NEED_AP_MLME builds
Make the dummy hostapd_hw_mode_txt() wrapper return "UNKNOWN" instead of
NULL to avoid a warning from a debug printf using %s with NULL.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-09 12:44:08 +02:00
Jouni Malinen
dd530b8739 Silence compiler warning with CONFIG_NO_ROAMING=y
Comment out unused static functions if CONFIG_NO_ROAMING is defined.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-09 12:40:17 +02:00
Alexander Wetzel
e1650a7b0e tests: Set key_flag when using SET_KEY
Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
2020-01-09 12:38:36 +02:00
Alexander Wetzel
a919a26035 Introduce and add key_flag
Add the new set_key() parameter "key_flag" to provide more specific
description of what type of a key is being configured. This is needed to
be able to add support for "Extended Key ID for Individually Addressed
Frames" from IEEE Std 802.11-2016. In addition, this may be used to
replace the set_tx boolean eventually once all the driver wrappers have
moved to using the new key_flag.

The following flag are defined:

  KEY_FLAG_MODIFY
    Set when an already installed key must be updated.
    So far the only use-case is changing RX/TX status of installed
    keys. Must not be set when deleting a key.

  KEY_FLAG_DEFAULT
    Set when the key is also a default key. Must not be set when
    deleting a key. (This is the replacement for set_tx.)

  KEY_FLAG_RX
    The key is valid for RX. Must not be set when deleting a key.

  KEY_FLAG_TX
    The key is valid for TX. Must not be set when deleting a key.

  KEY_FLAG_GROUP
    The key is a broadcast or group key.

  KEY_FLAG_PAIRWISE
    The key is a pairwise key.

  KEY_FLAG_PMK
    The key is a Pairwise Master Key (PMK).

Predefined and needed flag combinations so far are:

  KEY_FLAG_GROUP_RX_TX
    WEP key not used as default key (yet).

  KEY_FLAG_GROUP_RX_TX_DEFAULT
    Default WEP or WPA-NONE key.

  KEY_FLAG_GROUP_RX
    GTK key valid for RX only.

  KEY_FLAG_GROUP_TX_DEFAULT
    GTK key valid for TX only, immediately taking over TX.

  KEY_FLAG_PAIRWISE_RX_TX
    Pairwise key immediately becoming the active pairwise key.

  KEY_FLAG_PAIRWISE_RX
    Pairwise key not yet valid for TX. (Only usable with Extended Key ID
    support.)

  KEY_FLAG_PAIRWISE_RX_TX_MODIFY
    Enable TX for a pairwise key installed with KEY_FLAG_PAIRWISE_RX.

  KEY_FLAG_RX_TX
    Not a valid standalone key type and can only used in combination
    with other flags to mark a key for RX/TX.

This commit is not changing any functionality. It just adds the new
key_flag to all hostapd/wpa_supplicant set_key() functions without using
it, yet.

Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
2020-01-09 12:38:36 +02:00
Markus Theil
7a42316374 tests: Fix Python sleep function
Current Python versions have no os.sleep(), use time.sleep() instead.

module 'os' has no attribute 'sleep'
Traceback (most recent call last):
  File "./run-tests.py", line 521, in main
    t(dev, apdev)
  File "/home/mtheil/hostap/tests/hwsim/test_pmksa_cache.py", line 356, in test_pmksa_cache_expiration
    hapd.wait_ptkinitdone(dev[0].own_addr())
  File "/home/mtheil/hostap/tests/hwsim/hostapd.py", line 282, in wait_ptkinitdone
    os.sleep(0.1)

Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
2020-01-09 11:55:53 +02:00
Jouni Malinen
3df4c05aec nl80211: Pass set_key() parameter struct to wpa_driver_nl80211_set_key()
This is the function that actually uses the parameters, so pass the full
parameter struct to it instead of hiding the struct from it in the
simple wrapper.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-09 00:48:57 +02:00
Gurumoorthi Gnanasambandhan
99d8c4dca3 hostapd: Support VLAN offload to the driver
If the driver supports VLAN offload mechanism with a single netdev, use
that instead of separate per-VLAN netdevs.

Signed-off-by: Gurumoorthi Gnanasambandhan <gguru@codeaurora.org>
2020-01-09 00:48:57 +02:00
Gurumoorthi Gnanasambandhan
0f903f37dc nl80211: VLAN offload support
Add indication for driver VLAN offload capability and configuration of
the VLAN ID to the driver.

Signed-off-by: Gurumoorthi Gnanasambandhan <gguru@codeaurora.org>
2020-01-09 00:48:57 +02:00
Gurumoorthi Gnanasambandhan
4d3ae54fbd Add vlan_id to driver set_key() operation
This is in preparation for adding support to use a single WLAN netdev
with VLAN operations offloaded to the driver. No functional changes are
included in this commit.

Signed-off-by: Gurumoorthi Gnanasambandhan <gguru@codeaurora.org>
2020-01-09 00:48:57 +02:00
Jouni Malinen
f822546451 driver: Move set_key() parameters into a struct
This makes it more convenient to add, remove, and modify the parameters
without always having to update every single driver_*.c implementation
of this callback function.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-09 00:48:57 +02:00
Jouni Malinen
283be365c3 tests: SAE and AP sending Confirm message without waiting STA (2)
This goes through sae_confirm_immediate=2 behavior.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-08 20:58:18 +02:00
Jouni Malinen
3912cbd88d SAE: A bit optimized sae_confirm_immediate=2 for testing purposes
sae_confirm_immediate=2 can now be used in CONFIG_TESTING_OPTIONS=y
builds to minimize the latency between SAE Commit and SAE Confirm by
postponing transmission of SAE Commit until the SAE Confirm frame is
generated. This does not have significant impact, but can get the frames
tiny bit closer to each other over the air to increase testing coverage.
The only difference between sae_confirm_immediate 1 and 2 is in the
former deriving KCK, PMK, PMKID, and CN between transmission of the
frames (i.e., a small number of hash operations).

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-08 20:57:08 +02:00
Vamsi Krishna
33c8a10498 Do not select APs found on disabled channels for connection
If a channel list changed event is received after a scan and before
selecting a BSS for connection, a BSS found on a now disabled channel
may get selected for connection. The connect request issued with the BSS
found on a disabled channel is rejected by cfg80211. Filter out the BSSs
found on disabled channels and select from the other BSSs found on
enabled channels to avoid unnecessary connection attempts that are bound
to fail.

The channel list information will be updated by the driver in cases like
country code update, disabling/enabling specific bands, etc. which can
occur between the scan and connection attempt.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-08 16:19:47 +02:00
Vamsi Krishna
aa663baf45 Fix QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG1_CENTER_CHANNEL NULL check
Correct the check for presence of
QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG1_CENTER_CHANNEL attribute before using it
while processing acs_result event.

Fixes: 857d94225a ("Extend offloaded ACS QCA vendor command to support VHT")
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-08 16:14:24 +02:00
Markus Theil
2ffdf32eb8 tests: Add digestmod for Python 3.8
The digestmod argument also exists in earlier Python versions,
version 3.8 does not set a default argument anymore.

Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
2020-01-08 14:57:13 +02:00
Markus Theil
f7b2fe99ea tests: Fix undefined behavior in module tests
Test: wpa_supplicant module tests
../src/utils/utils_module_tests.c:933:7: runtime error: left shift of 1 by 31 places cannot be represented in type 'int'

Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
2020-01-08 14:56:55 +02:00
Jouni Malinen
297d69161b OpenSSL: Fix memory leak in TOD policy validation
Returned policies from X509_get_ext_d2i() need to be freed.

Fixes: 21f1a1e66c ("Report TOD policy")
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-07 20:40:12 +02:00
Markus Theil
8296ee1805 RSN IBSS: Fix EAPOL TX using control port
This was previously done only in supplicant role, but a similar change
is needed for the authenticator role.

Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
2020-01-06 22:33:45 +02:00
Jouni Malinen
09f96acb9d tests: PSK/EAP without nl80211 control port
Signed-off-by: Jouni Malinen <j@w1.fi>
2020-01-05 21:31:33 +02:00
Jouni Malinen
c52129bed8 nl80211: Allow control port to be disabled with a driver param
This is mainly for testing purposes to allow wpa_supplicant and hostapd
functionality to be tested both with and without using the nl80211
control port which is by default used whenever supported by the driver.
control_port=0 driver parameter will prevent that from happening.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-01-05 21:31:33 +02:00