Commit graph

4267 commits

Author SHA1 Message Date
Shan Palanisamy
06bb8c62ff hostapd: Add global ctrl_iface commands for adding/removing interfaces
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-25 13:47:49 +03:00
Shan Palanisamy
7554565299 hostapd: Add ctrl_iface for enabling/reloading/disabling interface
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-25 13:47:36 +03:00
Shan Palanisamy
c90fd48514 hostapd: Add global control interface
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-25 13:47:24 +03:00
Jouni Malinen
3776ac73b2 Move hostapd global callback functions into hapd_interfaces
These function pointers are going to be the same for each interface so
there is no need to keep them in struct hostapd_iface. Moving them to
struct hapd_interfaces makes it easier to add interfaces at run time.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-25 13:47:05 +03:00
Jouni Malinen
27b80b5b4c wpa_cli: Add a 'raw' command for sending unprocessed data
This can be used to test new control interface commands and to use
commands that may not yet be supported by wpa_cli.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-25 13:33:29 +03:00
Dmitry Shmidt
39ee845f92 wpa_supplicant: Add bss_flush command to invalidate scan results
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2012-08-25 10:23:22 +03:00
Jouni Malinen
bf428a739c P2P: Fix memory leak with driver-based P2P management
If the P2P management operations are handled within the driver, the
P2P service entries were not freed when terminating wpa_supplicant.
Fix this by calling wpas_p2p_service_flush() even if the P2P module
within wpa_supplicant has not been initialized.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-24 20:45:22 +03:00
Jouni Malinen
1e05192eec test: Fix driver data pointer for the P2P commands
The driver_test.c data structures had been changed to use a separate
BSS structure, but the P2P commands were not using the new design.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-24 20:44:24 +03:00
Anirban Sirkhell
1c79cdff20 Add wps_cancel to hostapd_cli help text
Commit 4c374cde2f added a new wps_cancel
command, but didn't add it to the usage text in hostapd_cli. Add an
entry for this command.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-24 19:02:56 +03:00
Sunil Dutt
1af1c9ceb6 P2P: Fix PD retries on delay in off channel transmission
Commit 488f4a7108 configures a timer
before p2p_send_action(). This may result in the timer getting fired
earlier to the off channel transmission of the frame and thus another PD
request being retransmitted. This shall lead to the new PD request with
an incremented dialog token being transmitted. For the cases where the
later PD request might not be transmitted as the host driver is busy
transmitting the earlier frame, the received PD response could be
dropped for the dialog token mismatch. Remove the timer configuration to
avoid this behavior.

Signed-hostap: Sunil Dutt Undekari <duttus@codeaurora.org>
intended-for: hostap-1
2012-08-24 11:54:02 +03:00
Jouni Malinen
b4a5dfa95d P2P: Limit maximum number of stored P2P clients to 100
This limits the maximum size of the p2p_client_list parameter that
is maintained at the GO for a persistent group. In other words, only
the 100 most recently seen P2P clients are kept in the list.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
intended-for: hostap-1
2012-08-24 00:25:14 +03:00
Jouni Malinen
223167956c Improve p2p_client_list updates in configuration file
This list can get truncated due to too many addresses getting added.
Reorder the entries in a way that allows the most recently added values
to be maintained in the list and use better debug/error messages when
parsing the value.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
intended-for: hostap-1
2012-08-24 00:25:14 +03:00
Jouni Malinen
d42bc5e178 Handle long configuration file lines more gracefully
Skip the end of long configuration lines that get truncated in
wpa_config_get_line(). Without this, the rest of the file was being
parsed as another line and that resulted in an unexpected error
message (wrong line number and wrong starting point).

In addition, increase the read buffer for network blocks from 256
to 2000 since p2p_client_list parameter can have long values. These
were supposed to truncated cleanly, but the unexpected processing of
the end of the file (which is now fixed in this commit) could cause
configuration file to be rejected.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
intended-for: hostap-1
2012-08-23 23:52:45 +03:00
Jouni Malinen
cc8c7b8840 P2P: Remove unnecessary call in resuming p2p_find
Commit 99fcd40409 added a call to update
search delay after failed authentication attempt. This change was
supposed to be only in p2p_supplicant.c for the successful case. The
extra call does not really do anything, but it's good to remove it to
avoid any confusion in the future.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-23 20:28:04 +03:00
Jouni Malinen
99fcd40409 P2P: Allow scan operations during p2p_find
Previously, all station mode scan operations were either skipped or
delayed while any P2P operation was in progress. To make concurrent
operations easier to use, reduce this limitation by allowing a scan
operation to be completed in the middle of a p2p_find. In addition,
allow station mode association to be completed. When the station mode
operation is run to its completion (scan results not acted on,
connection to an AP completed, connection failed), resume the p2p_find
operation.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-23 19:42:53 +03:00
Jouni Malinen
05a77b3b46 P2P: Use 500 ms search delay by default during concurrent operations
If the p2p_find command is used without the delay parameter, a 500 ms
default search delay will now be used when any interface using the same
radio is in an concurrent operation. "p2p_find delay=0" can be used to
enforce the old behavior in such a case if needed.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-23 18:34:57 +03:00
Jouni Malinen
37448ede31 P2P: Add option for adding extra delay to p2p_find
A new optional delay=<search delay in milliseconds> parameter can now be
used with p2p_find command to request an extra delay between search
iterations. This can be used, e.g., to make p2p_find friendlier to
concurrent operations by avoiding it from taking 100% of the radio
resources.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-23 18:20:58 +03:00
Jouni Malinen
065d2895b4 Add UNAUTH-TLS vendor specific EAP type
This EAP type uses a vendor specific expanded EAP header to encapsulate
EAP-TLS with a configuration where the EAP server does not authenticate
the EAP peer. In other words, this method includes only server
authentication. The peer is configured with only the ca_cert parameter
(similarly to other TLS-based EAP methods). This method can be used for
cases where the network provides free access to anyone, but use of RSN
with a securely derived unique PMK for each station is desired.

The expanded EAP header uses the hostapd/wpa_supplicant vendor
code 39068 and vendor type 1 to identify the UNAUTH-TLS method.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-22 22:34:11 +03:00
Jouni Malinen
d13f9857f8 Use proper private enterprise number for EAP VENDOR-TEST
Now that the project has its own code, it should be used with the
VENDOR-TEST EAP method.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-22 21:37:19 +03:00
Jouni Malinen
add11058e2 wlantest: Fix couple of compiler warnings
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-22 11:16:48 +03:00
Jouni Malinen
0121126211 Add sha256-prf.tls into libcrypto build
This was forgotten in commit ab637dcb37.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-22 11:15:55 +03:00
Jouni Malinen
a8a3868ddd HS 2.0: Add preliminary documentation for Hotspot 2.0
This describes wpa_supplicant functionality for Interworking
(probe request parameters, network selection) and Hotspot 2.0.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-21 21:32:31 +03:00
Jouni Malinen
597d5d1b11 hlr_auc_gw: Add SQLite database support for Milenage information
An SQLite database can now be used to manage the Milenage information
instead of a text file. The new hlr_auc_gw.txt document describes how
this is configured and used.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-19 22:59:30 +03:00
Jouni Malinen
e43bd7a1b7 hlr_auc_gw: Return FAILURE if IMSI for AKA is not known
Instead of no response, send a FAILURE response as AKA-RESP-AUTH if the
requested IMSI is not known.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-19 22:08:23 +03:00
Jouni Malinen
c13f0a3e00 EAP-SIM DB: Fix a memory leak on DB connection re-opening
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-19 21:17:26 +03:00
Jouni Malinen
704b8762a2 EAP-SIM DB: Do not require external program at startup
The previous implementation was able to re-open the connection to an
external program (e.g., hlr_auc_gw) when needed, but required the
connection to be available during startup. Extend this to allow the
initial failure, so that hlr_auc_gw can be started after hostapd.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-19 20:51:21 +03:00
Jouni Malinen
a120c3fad6 WPS: Remove unused credential handlers for 802.1X
The WPA_AUTH_WPA and WPA_AUTH_WPA2 cases have already been rejected in
this function when execution comes here. In theory, support for
WPA-Enterprise could be added, but since that has not happened over the
years, there is no good reason to keep this dead code here.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-19 19:10:40 +03:00
Jouni Malinen
c7f1791970 OpenSSL: Make fips186_2_prf() easier for static analyzers
Explicitly validate seed_len to skip memset call with zero length of
copied data at the end of the buffer. This is not really needed, but it
makes the code a bit easier for static analyzers. This is identical to
the commit a9ea17491a but for the OpenSSL
version of the function.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-19 18:54:34 +03:00
Jouni Malinen
6e4598755b Use os_strdup() instead of os_malloc() + os_memcpy()
It is simpler to use os_strdup() to copy strings even if the end results
end up being used as binary data with a separate length field.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-19 18:50:42 +03:00
Jouni Malinen
09ad3bb4d4 Remove unnecessary header file inclusion
Commit bfc62fe133 moved the code that
using crypto/random.h, but forgot to remove the inclusion of that header
file.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-19 18:44:53 +03:00
Jouni Malinen
997de7aa5c Remove unnecessary base64.h inclusion
All the TNC base64 operations are within tncs.c, so there is no point in
including base64.h into eap_server_tnc.c.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-19 18:41:45 +03:00
Jouni Malinen
34caf71a09 Handle EVENT_RX_MGMT validation consistently
All the other places processing EVENT_RX_MGMT events assume that the
event data is included, so not much point in verifying that here.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-19 18:38:27 +03:00
Jouni Malinen
41fe8b42b5 Show an error message if sending of Action frame fails
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-19 18:34:16 +03:00
Jouni Malinen
236a52fd1f RADIUS DAS: Verify that Error-Code attribute is added
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-19 18:32:35 +03:00
Jouni Malinen
75227f3ada nl80211: Print an error if WDS STA interface cannot be set up
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-19 18:28:55 +03:00
Jouni Malinen
1871f7116e wpabuf: Get rid of separate ext_data pointer
Use an explicit pointer to the beginning of the buffer and a flag
to indicate whether that is to external data or not. This avoids
a branch whenever accessing the buffer and helps some static
analyzers to understand the wpabuf memory uses better.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-19 18:25:25 +03:00
Jouni Malinen
392824ef10 Clean up the closed stdin/stdout/stderr workaround to close sockets
Close the workaround sockets when wpa_supplicant exists to avoid
hitting resource leak warnings.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-19 18:01:04 +03:00
Jouni Malinen
3489cfb09c Use a shared helper function for merging supported rate lists
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-19 17:52:41 +03:00
Jouni Malinen
a2f94dbe62 Fix memory allocation failure handling in EAP-TTLS/MSCHAPv2 server
If the os_malloc() call for the User-Name value fails in EAP-TTLS
server, the inner MSCHAPv2 processing could have tried to dereference a
NULL pointer. Avoid this by handling this cleanly as an internal error
and reject the authentication attempt.

Signed-hostap: Jouni Malinen <j@w1.fi>
intended-for: hostap-1
2012-08-19 17:23:00 +03:00
Jouni Malinen
44ec48ebfd FIPS: Remove md5-non-fips.c
Commit c9e08af24f removed the only user of
the special case MD5 use that would be allowed in FIPS mode in
tls_prf_sha1_md5(). Commit 271dbf1594
removed the file from the build, but left the implementation into the
repository. To clean things up even further, remove this functionality
completely since it is not expected to be needed for FIPS mode anymore.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-19 16:53:15 +03:00
Michael Braun
be9e8c293c Add User-Name/CUI from RADIUS ACL in Accounting messages
This allows User-Name and Chargeable-User-Identity attributes to be
passed from Access-Accept into Accounting messages even when IEEE 802.1X
is not used.

Signed-hostap: Michael Braun <michael-dev@fami-braun.de>
2012-08-19 14:27:30 +03:00
Michael Braun
1a819aa7d5 Initialize EAPOL auth identity/cui with STA entry data
If RADIUS ACL was used for the STA, identity/cui may already be
known at this point.

Signed-hostap: Michael Braun <michael-dev@fami-braun.de>
2012-08-19 14:23:20 +03:00
Michael Braun
2092597fee Copy User-Name/CUI from RADIUS ACL to STA entry
Signed-hostap: Michael Braun <michael-dev@fami-braun.de>
2012-08-19 14:20:10 +03:00
Michael Braun
35eeaac324 Store User-Name and CUI in RADIUS ACL cache
These can be used for Accounting messages when IEEE 802.1X is not used.

Signed-hostap: Michael Braun <michael-dev@fami-braun.de>
2012-08-19 14:09:28 +03:00
Jouni Malinen
bd1410197e Remove an extra level of indentation in hostapd_acl_cache_get()
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-19 13:46:23 +03:00
Jouni Malinen
99be648c5d HS 2.0: Do not allow AP hs20=1 configuration without RSN
Hotspot 2.0 networks are required to use WPA2-Enterprise/CCMP, so
enforce this while validating hostapd configuration.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-19 12:55:12 +03:00
Jouni Malinen
63e5caaa6f Interworking: Do not match credentials without WPA2-Enterprise
Since we currently support only HS 2.0 networks with Interworking
network selection, do not indicate credential match unless the
network uses WPA2-Enterprise.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-19 12:55:12 +03:00
Jouni Malinen
8601b50312 Interworking: Enforce WPA2-Enterprise/CCMP
Since we currently support only HS 2.0 networks with Interworking
network selection, enforce that WPA2-Enterprise/CCMP is used on the
AP instead of allowing any WPA-Enterprise combination.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-19 12:55:12 +03:00
Jouni Malinen
4ed34f5acd HS 2.0: Do not indicate HS 2.0 status without WPA2-Enterprise
Hotspot 2.0 allows only WPA2-Enterprise to be used, so other types of
networks must not be indicated as Hotspot 2.0 networks even if they
(incorrectly) advertise HS 2.0 support.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-19 12:54:48 +03:00
Jouni Malinen
2b95f57ba5 Interworking: Do not reconnect without "auto" parameter
When there was no credential match, but an enabled network block matched
with a scan result, wpa_supplicant reconnected at the end of
interworking_select command even if "auto" parameter was not used. Fix
this by running the reconnect only if requested to automatically select
a network.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-19 12:26:21 +03:00