Commit graph

369 commits

Author SHA1 Message Date
Witold Sowa
b2cc805619 Set current ssid when entering AP mode
After successful starting AP mode, current_ssid field is set to
ssid used to create AP.
2009-08-15 21:04:50 +03:00
Jouni Malinen
905a32a5f4 Added new SHA1 files into VS project files to fix the build 2009-08-15 20:51:35 +03:00
Jouni Malinen
49eba5f82f WPS: Workaround mixed-mode WPA+WPA2 auth type in credentials
An SMC router was reported to use 0x22 (WPAPSK + WPA2PSK) in the
authentication type of the provisioned credential and wpa_supplicant
rejected this as invalid. Work around this by replacing WPAPSK + WPA2PSK
with WPA2PSK.
2009-08-15 20:40:45 +03:00
Jouni Malinen
ba30964b60 Force rebuilding of src/drivers between hostapd and wpa_supplicant
This is a (hopefully) temporary workaround to allow the same source code
tree to be used for building hostapd and wpa_supplicant without having
to manually force recompilation of some files. Currently, some of the
driver wrapper files need to be built separately for hostapd and
wpa_supplicant (#ifdef's in the files based on AP functionality).

This is somewhat racy as far as parallel make execution is concerned,
i.e., it may be necessary to run "make -j#" twice (plain "make" works
fine. Since this is supposed to be a temporary workaround, there is not
much point in trying to fix this with any more complex make processing.
2009-08-14 20:40:37 +03:00
Johannes Berg
fe6bdb777e Replace NEED_MLME with NEED_AP_MLME
This makes it clearer that it's about the AP, not client-side MLME, even
when built into the client (wpa_supplicant).
2009-08-14 20:01:41 +03:00
Johannes Berg
e7cd16cac5 Create a common drivers makefile snippet
Instead of having all driver stuff collected across wpa_supplicant
and hostapd, create a common snippet that they both include and
that handles the build configuration.
2009-08-14 19:53:27 +03:00
Jouni Malinen
3e91d24260 wpa_passphrase does not need FIPS PRF, MD4, or AES extra functionality 2009-08-13 17:07:36 +03:00
Johannes Berg
4c9e03e0b2 Crypto build cleanup: remove CONFIG_NO_AES_*
Instead of using a defines and conditional building of AES parts,
move the conditional functionality into separate files.
2009-08-13 11:40:28 +03:00
Johannes Berg
27da6d4a0e Crypto build cleanup: remove CONFIG_NO_AES_ENCRYPT
Instead of using a define and conditional building of AES parts,
move the AES encryption routines into a separate file.
2009-08-13 11:21:32 +03:00
Johannes Berg
381fcbc9f4 Crypto build cleanup: remove CONFIG_NO_AES_DECRYPT
Instead of using a define and conditional building of AES parts,
move the AES decryption routines into a separate file.
2009-08-13 11:16:21 +03:00
Johannes Berg
18abe7acb0 Crypto build cleanup: remove CONFIG_NO_PBKDF2
Instead of using a define and conditional building of sha1.c parts,
move the PBKDF2 implementation into a separate file.
2009-08-11 20:31:39 +03:00
Johannes Berg
d9feab18fc Crypto build cleanup: remove CONFIG_NO_TLS_PRF
Instead of using a define and conditional building of sha1.c parts,
move the TLS PRF implementation into a separate file.
2009-08-11 20:24:06 +03:00
Johannes Berg
6f693b5d0b Crypto build cleanup: remove CONFIG_NO_T_PRF
Instead of using a define and conditional building of sha1.c parts,
move the T-PRF implementation into a separate file.
2009-08-11 20:19:37 +03:00
Johannes Berg
05edfe2994 Crypto build cleanup: remove NEED_FIPS186_2_PRF
Instead of using a define and conditional building of crypto wrapper
parts, move the FIPS 186-2 PRF implementation into separate files.
2009-08-11 20:06:23 +03:00
Johannes Berg
ad01a5315e Crypto build cleanup: remove INTERNAL_MD5
Instead of using a define and conditional building of md5.c parts,
move the internal-MD5 into a separate file.
2009-07-28 21:36:13 +03:00
Johannes Berg
bd4e28950d Crypto build cleanup: remove INTERNAL_MD4
In addition, rename md4.c to md4-internal.c to match in style with
SHA-1 conditionally built internal implementation.
2009-07-28 21:27:02 +03:00
Johannes Berg
598a792d8c Crypto build cleanup: remove INTERNAL_SHA256
Instead of using a define and conditional building of sha256.c parts,
move the internal-SHA256 into a separate file.
2009-07-28 21:20:04 +03:00
Johannes Berg
246157cba6 Crypto build cleanup: remove INTERNAL_AES
In addition, rename aes.c to aes-internal.c to match in style with
SHA-1 conditionally built internal implementation.
2009-07-28 21:09:57 +03:00
Johannes Berg
657f038102 Crypto build cleanup: remove INTERNAL_DES
In addition, rename des.c to des-internal.c to match in style with
SHA-1 conditionally built internal implementation.
2009-07-28 21:00:44 +03:00
Johannes Berg
928a50a355 Crypto build cleanup: remove INTERNAL_SHA1
Instead of using a define and conditional building of sha1.c parts,
move the internal-SHA-1 into a separate file.
2009-07-28 20:47:04 +03:00
Johannes Berg
602606091b CONFIG_WIRELESS_EXTENSION need not be in CFLAGS 2009-07-28 20:25:19 +03:00
Johannes Berg
91382de4d1 CONFIG_WIRELESS_EXTENSION is purely internal to the Makefile 2009-07-28 14:41:33 +03:00
Johannes Berg
b2840aafaf make the build process quieter to see warnings 2009-07-28 14:37:40 +03:00
Johannes Berg
8055fb781d Clean up some more binaries in wpa_supplicant 'make clean' 2009-07-28 14:15:04 +03:00
Jon Loeliger
2e8eac2d67 Allow wpa_supplicant to use libnl-2.0
Change existing CONFIG_LIBNL20 compatibility code in
driver_nl80211.c to be used by both wpa_supplicant
and hostapd, but take care of nl_handle too now.

Propagate CONFIG_LIBNL20 out of .config file and onto
CFLAGS in the Makefile.

Use libnl-gen now too.

Signed-off-by: Jon Loeliger <jdl@bigfootnetworks.com>
---
2009-07-25 17:21:52 +03:00
Witold Sowa
137fb724b3 Set state to COMPLETE when AP mode has been initialized successfully 2009-07-25 17:01:23 +03:00
Jouni Malinen
4625a47f4b WPS: Change wpa_supplicant wps_reg to not send out M8
Since we do not currently support changing the AP settings received
from M7, there is no point in actually sending out the M8 that would
likely trigger the AP to reconfigure itself and potentially reboot.
For now, we just receive the AP settings in M7 and add a local network
configuration block based on those, but NACK the message. This makes
wps_reg work like wps_pin, but by using the AP PIN instead of a client
PIN.
2009-06-10 15:53:35 +03:00
Jouni Malinen
b14912025f Comment out unused functions if IEEE8021X_EAPOL is not defined 2009-05-29 22:35:31 +03:00
Dan Williams
cb8564b1dd dbus: add 'scanning' property
When the supplicant is connected and performs a scan, it doesn't enter
WPA_SCANNING state for various reasons.  However, external programs
still need to know that the supplicant is scanning since they may not
wish to perform certain operations during a scan (as those operations
will likely fail or yield incorrect results).  Add a 'scanning' property
and signal to the supplicant dbus interface to allow clients to
synchronize better with the supplicant when it scans.

Signed-off-by: Dan Williams <dcbw@redhat.com>
2009-05-27 21:06:40 +03:00
Jouni Malinen
077a781f7a WPS: Add support for setting timeout for PIN
hostapd_cli wps_pin command can now have an optional timeout
parameter that sets the PIN lifetime in seconds. This can be used
to reduce the likelihood of someone else using the PIN should an
active PIN be left in the Registrar.
2009-05-26 17:44:44 +03:00
Jaime Soriano Pastor
e8fa6039f6 WPS methods exported over DBus
I've exported the methods wpsPbc, wpsReg and wpsPin (patch attached),
so wpa_supplicant should be able to connect with WPS using the dbus
interface. I couldn't test it well because the problem seems to be in
my wireless card, a Broadcom BCM4328. At least it seems to do the same
using both interfaces. With ndiswrapper driver the "wpsie" entry
(thanks Dan!) didn't appear, and with the Broadcom wl driver it
appears but I cannot associate using WPS.
2009-05-06 13:23:41 +03:00
Helmut Schaa
01a569e8a1 wpa_supplicant: add DBus method for changing debug parameters
Add a new DBus method "setDebugParams" which takes the parameters
debug_level, debug_timestamp and show_keys as input and updates the
internal debug variables accordingly.

To change the debug level, enable/disable timestamps and enable/disable
show_keys the following dbus-send command can be used:

dbus-send --system --dest=fi.epitest.hostap.WPASupplicant --print-reply
/fi/epitest/hostap/WPASupplicant fi.epitest.hostap.WPASupplicant.setDebugParams
int32:0 boolean:false boolean:false

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
2009-05-06 11:54:00 +03:00
Jouni Malinen
da1fb17ca7 Add handling of SME auth/assoc timeout events
This allows wpa_supplicant to start searching for other APs (or re-try)
if the MLME times out.
2009-04-24 00:08:24 +03:00
Jouni Malinen
4bc181ecc7 Add new wpa_supplicant driver op for setting 802.1X port status
This can be used with drivers that implement PAE to control whether
normal data frames (non-EAPOL) are allowed.
2009-04-22 16:01:37 +03:00
Jouni Malinen
3ec97afe57 wpa_supplicant AP: Add preliminary support for WPS Internal Registrar
When in AP mode, wpa_supplicant is now enabling WPS (only Internal
Registrar). wpa_cli wps_pbc and wps_pin commands can be used to initiate
WPS negotiation similarly to how this is done in station mode (though,
the BSSID parameter is ignored).
2009-04-21 16:45:16 +03:00
Jouni Malinen
a8d6ffa48f wpa_supplicant AP: Add sta_set_flags 2009-04-20 16:33:13 +03:00
Jouni Malinen
db149ac949 wpa_supplicant AP: Add EAPOL frame TX and RX
This allows WPA-Personal 4-way handshake to be completed successfully.
2009-04-20 16:27:45 +03:00
Jouni Malinen
07d9a55297 wpa_supplicant AP: Update WPA/RSN configuration
Couple of additional operations are needed to make hostapd configuration
valid for WPA.
2009-04-20 16:11:08 +03:00
Jouni Malinen
c3dc92e85f Make deauthentication and disassociation consistent
This fixes an issue where the station was not marked disassociated
properly with locally requested deauthentication.
2009-04-20 11:36:47 +03:00
Jouni Malinen
83935317a7 Disconnect if 4-way handshake processing fails
There is no point in trying to continue if a 4-way handshake frame is
discarded or if PTK/GTK/IGTK configuration fails. Force the client to
disconnect in such a case to avoid confusing user by claiming the
connection was successfully completed.
2009-04-20 11:35:21 +03:00
Jouni Malinen
0f4e8b4f65 wpa_supplicant AP: add sta_add() and sta_remove() 2009-04-17 20:09:20 +03:00
Jouni Malinen
be301e56b6 wpa_supplicant AP: Fix build after hostapd driver_ops changes 2009-04-17 16:41:53 +03:00
Jouni Malinen
b615a25e4e wpa_supplicant AP: Fix hw_mode for 5 GHz channels 2009-04-12 12:10:08 +03:00
Jouni Malinen
92f475b4d8 Merge hostapd driver init functions into one
Use a parameter structure to pass in information that can be more easily
extended in the future. Include some of the parameters that were
previously read directly from hapd->conf in order to reduce need for
including hostapd/config.h into driver wrappers.
2009-04-09 23:28:21 +03:00
Jouni Malinen
c3965310e6 Use common get_hw_feature_data for hostapd and wpa_supplicant
This merges the driver wrapper implementations to use the same
implementation both for hostapd and wpa_supplicant operations to avoid
code duplication.
2009-04-09 14:11:39 +03:00
Jouni Malinen
c51218372f Merge wpa_supplicant and hostapd driver wrapper implementations
This commit merges the driver_ops structures and implementations from
hostapd/driver*.[ch] into src/drivers. This is only an initial step and
there is room for number of cleanups to share code between the hostapd
and wpa_supplicant parts of the wrappers to avoid unnecessary source
code duplication.
2009-04-09 13:40:12 +03:00
Jouni Malinen
c2220ec0b7 Fix couple of forgotten wpa_hw_modes -> hostapd_hw_modes
Some build configurations resulted in failure due to missed structure
rename.
2009-04-06 15:02:48 +03:00
Jouni Malinen
a0b2f99bd7 nl80211: Fix static WEP key configuration when using SME
Need to set WEP keys before requesting authentication in order to get
Shared Key authentication working. Previously, the WEP keys were not set
at all when using SME in wpa_supplicant.
2009-04-04 16:58:16 +03:00
Jouni Malinen
282d55908b wpa_supplicant AP: Add get_hw_feature_data
This is enough to allow open mode association to be completed with
driver_nl80211.c.
2009-04-03 19:11:22 +03:00
Jouni Malinen
6caf9ca68c Share same hw_feature definitions between hostapd and wpa_supplicant 2009-04-03 19:04:20 +03:00