Commit graph

254 commits

Author SHA1 Message Date
Jouni Malinen
92e3c0b14c EAP-PAX: Derive EAP Session-Id
This adds EAP-PAX server and peer method functions for deriving
Session-Id from Method-Id per RFC 4746 and RFC 5247.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-01 01:46:07 +02:00
Jouni Malinen
a7bec9e7b2 EAP-TTLS: Add support for deriving EMSK
This extends EAP-TTLS server and peer implementations to support EMSK
derivation per RFC 5281.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-01 01:28:19 +02:00
Jouni Malinen
9429bee4cc EAP-TLS server: Clear temporary buffer during EMSK derivation
Now that EMSK derivation is taken into use with ERP, it is better to
make sure the temporary MSK + EMSK buffer does not get left in heap
after use.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-01 01:28:19 +02:00
Jouni Malinen
d1f89dd732 EAP server: Add getSessionId
This extends EAP server implementation to derive Session-Id similarly to
the existing EAP peer implementation.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-30 15:53:11 +02:00
Jouni Malinen
adf96fb66b WPS: Add explicit message length limit of 50000 bytes
Previously, this was implicitly limited by the 16-bit length field to
65535. This resulted in unhelpful static analyzer warnings (CID 62868).
Add an explicit (but pretty arbitrary) limit of 50000 bytes to avoid
this. The actual WSC messages are significantly shorter in practice, but
there is no specific protocol limit, so 50000 is as good as any limit to
use here.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-23 21:03:40 +02:00
Jouni Malinen
453553698c EAP-pwd: Remove unnecessary OpenSSL EVP_sha256() registration
This gets registered in tls_openssl.c from tls_init(), so there is no
need for EAP-pwd implementation to register explicitly. This avoids some
corner cases where OpenSSL resources do not get fully freed on exit.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-17 01:20:10 +02:00
Jouni Malinen
8c5dfc79a5 EAP-MSCHAPv2 server: Check ms_funcs results more consistently
This makes the code more consistent by checking the somewhat theoretical
error cases more consistently (CID 72685).

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-11 19:43:36 +03:00
Jouni Malinen
6c9f74deaf EAP-PAX server: Remove unused assignment
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-11 18:14:42 +03:00
Jouni Malinen
918bd0fe78 EAP-SIM DB: Remove unused assignment
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-11 18:13:32 +03:00
Jouni Malinen
6f577c5e45 EAP-FAST server: Remove unused assignment
Commit e8c08c9a36 ('EAP-FAST server: Fix
potential read-after-buffer (by one byte)') changed the while loop
design in a way that does not require the pos variable to be updated
anymore. Remove that unneeded code to clean up static analyzer warnings
about unused assignments.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-11 18:11:14 +03:00
Jouni Malinen
e9471493ef EAP-FAST server: Remove unused write
next_type is not used in case m->check() results in ignoring the packet.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-11 18:10:27 +03:00
Jouni Malinen
eefec1e40b AES: Extend key wrap design to support longer AES keys
This adds kek_len argument to aes_wrap() and aes_unwrap() functions and
allows AES to be initialized with 192 and 256 bit KEK in addition to
the previously supported 128 bit KEK.

The test vectors in test-aes.c are extended to cover all the test
vectors from RFC 3394.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-07 14:57:06 +03:00
Jouni Malinen
6473e80ea4 EAP-PAX server: Add explicit CID length limit
Instead of using implicit limit based on 16-bit unsigned integer having
a maximum value of 65535, limit the maximum length of a CID explicitly
to 1500 bytes. This will hopefully help in reducing false warnings from
static analyzers (CID 72712).

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-09-07 17:10:33 +03:00
Jouni Malinen
e8c08c9a36 EAP-FAST server: Fix potential read-after-buffer (by one byte)
The special PAC_OPAQUE_TYPE_PAD case did not skip incrementing of the
pos pointer and could result in one octet read-after-buffer when parsing
the PAC-Opaque data.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-07-26 21:14:05 +03:00
Jouni Malinen
1f1fe195cd EAP-pwd: Clear identity string and temporary buffer explicitly
Use an explicit memset call to clear any configuration parameter and
dynamic data that contains private information like keys or identity.
This brings in an additional layer of protection by reducing the length
of time this type of private data is kept in memory.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-07-24 20:12:57 +03:00
Florent Daigniere
f119d66942 EAP-pwd: Verify BN_rand_range return code
This makes the EAP-pwd server and peer implementations more robust
should OpenSSL fail to derive random number for some reason. While this
is unlikely to happen in practice, the implementation better be prepared
for this should something unexpected ever happen. See
http://jbp.io/2014/01/16/openssl-rand-api/#review-of-randbytes-callers
for more details.

Signed-off-by: Florent Daigniere <nextgens@freenetproject.org>
2014-07-24 19:42:44 +03:00
Florent Daigniere
5197f0335c EAP-pwd: Use os_memcmp_const() for hash comparisons
This makes the implementation less likely to provide useful timing
information to potential attackers from comparisons of information
received from a remote device and private material known only by the
authorized devices.

Signed-off-by: Florent Daigniere <nextgens@freenetproject.org>
2014-07-24 19:39:44 +03:00
Florent Daigniere
26c10f797c OpenSSL: Use EC_POINT_clear_free instead of EC_POINT_free
This changes OpenSSL calls to explicitly clear the EC_POINT memory
allocations when freeing them. This adds an extra layer of security by
avoiding leaving potentially private keys into local memory after they
are not needed anymore. While some of these variables are not really
private (e.g., they are sent in clear anyway), the extra cost of
clearing them is not significant and it is simpler to just clear these
explicitly rather than review each possible code path to confirm where
this does not help.

Signed-off-by: Florent Daigniere <nextgens@freenetproject.org>
2014-07-24 19:35:07 +03:00
Florent Daigniere
3248071dc3 OpenSSL: Use BN_clear_free instead of BN_free
This changes OpenSSL calls to explicitly clear the bignum memory
allocations when freeing them. This adds an extra layer of security by
avoiding leaving potentially private keys into local memory after they
are not needed anymore. While some of these variables are not really
private (e.g., they are sent in clear anyway), the extra cost of
clearing them is not significant and it is simpler to just clear these
explicitly rather than review each possible code path to confirm where
this does not help.

Signed-off-by: Florent Daigniere <nextgens@freenetproject.org>
2014-07-24 19:28:39 +03:00
Jouni Malinen
0a13e06bdb EAP server: Clear keying material on deinit
Reduce the amount of time keying material (MSK, EMSK, temporary private
data) remains in memory in EAP methods. This provides additional
protection should there be any issues that could expose process memory
to external observers.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-07-02 12:38:48 +03:00
Jouni Malinen
3e4b77c9bd EAP-GTC: Use os_memcmp_const() for hash/password comparisons
This makes the implementation less likely to provide useful timing
information to potential attackers from comparisons of information
received from a remote device and private material known only by the
authorized devices.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-07-02 12:38:48 +03:00
Jouni Malinen
a6eae3f7a1 EAP-MSCHAPv2: Use os_memcmp_const() for hash/password comparisons
This makes the implementation less likely to provide useful timing
information to potential attackers from comparisons of information
received from a remote device and private material known only by the
authorized devices.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-07-02 12:38:48 +03:00
Jouni Malinen
30411b351c EAP-TTLS: Use os_memcmp_const() for hash/password comparisons
This makes the implementation less likely to provide useful timing
information to potential attackers from comparisons of information
received from a remote device and private material known only by the
authorized devices.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-07-02 12:38:47 +03:00
Jouni Malinen
a564d9ca36 EAP-MD5: Use os_memcmp_const() for hash/password comparisons
This makes the implementation less likely to provide useful timing
information to potential attackers from comparisons of information
received from a remote device and private material known only by the
authorized devices.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-07-02 12:38:47 +03:00
Jouni Malinen
4685482552 EAP-PSK: Use os_memcmp_const() for hash/password comparisons
This makes the implementation less likely to provide useful timing
information to potential attackers from comparisons of information
received from a remote device and private material known only by the
authorized devices.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-07-02 12:38:47 +03:00
Jouni Malinen
cba0f8698b EAP-PEAP: Use os_memcmp_const() for hash/password comparisons
This makes the implementation less likely to provide useful timing
information to potential attackers from comparisons of information
received from a remote device and private material known only by the
authorized devices.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-07-02 12:38:47 +03:00
Jouni Malinen
8f92826b15 EAP-GPSK: Use os_memcmp_const() for hash/password comparisons
This makes the implementation less likely to provide useful timing
information to potential attackers from comparisons of information
received from a remote device and private material known only by the
authorized devices.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-07-02 12:38:47 +03:00
Jouni Malinen
e1550d4be8 EAP-PAX: Use os_memcmp_const() for hash/password comparisons
This makes the implementation less likely to provide useful timing
information to potential attackers from comparisons of information
received from a remote device and private material known only by the
authorized devices.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-07-02 12:38:47 +03:00
Jouni Malinen
c434503f5e EAP-FAST: Use os_memcmp_const() for hash/password comparisons
This makes the implementation less likely to provide useful timing
information to potential attackers from comparisons of information
received from a remote device and private material known only by the
authorized devices.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-07-02 12:38:47 +03:00
Jouni Malinen
dddf7bbd4e EAP-EKE: Use os_memcmp_const() for hash/password comparisons
This makes the implementation less likely to provide useful timing
information to potential attackers from comparisons of information
received from a remote device and private material known only by the
authorized devices.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-07-02 12:38:47 +03:00
Jouni Malinen
dfb5608139 EAP-SAKE: Use os_memcmp_const() for hash/password comparisons
This makes the implementation less likely to provide useful timing
information to potential attackers from comparisons of information
received from a remote device and private material known only by the
authorized devices.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-07-02 12:38:47 +03:00
Jouni Malinen
05c79d6acd EAP-SIM/AKA: Use os_memcmp_const() for hash/password comparisons
This makes the implementation less likely to provide useful timing
information to potential attackers from comparisons of information
received from a remote device and private material known only by the
authorized devices.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-07-02 12:38:47 +03:00
Jouni Malinen
675ddad1c2 EAP-IKEv2: Use os_memcmp_const() for hash/password comparisons
This makes the implementation less likely to provide useful timing
information to potential attackers from comparisons of information
received from a remote device and private material known only by the
authorized devices.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-07-02 12:38:47 +03:00
Jouni Malinen
ee352f1e5a EAP-pwd: Add explicit total length limit
Instead of using implicit limit based on 16-bit unsigned integer having
a maximum value of 65535, limit the maximum length of a fragmented
EAP-pwd message explicitly to 15000 bytes. None of the supported groups
use longer messages, so it is fine to reject any longer message without
even trying to reassemble it. This will hopefully also help in reducing
false warnings from static analyzers (CID 68124).

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-07-02 12:38:47 +03:00
Jouni Malinen
b2b8a4cb10 EAP-SIM/AKA: Pass EAP type as argument to eap_sim_msg_finish()
This makes it easier for static analyzers to figure out which code paths
are possible within eap_sim_msg_finish() for EAP-SIM. This will
hopefully avoid some false warnings (CID 68110, CID 68113, CID 68114).

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-07-02 12:38:47 +03:00
Jouni Malinen
2dbc959699 EAP-FAST: Clean up TLV length validation (CID 62853)
Use size_t instead of int for storing and comparing the TLV length
against the remaining buffer length to make this easier for static
analyzers to understand.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-18 16:45:03 +03:00
Jouni Malinen
6590b6400f EAP-TNC: Limit maximum message buffer to 75000 bytes (CID 62873)
Since there is a limit on the EAP exchange due to maximum number of
roundtrips, there is no point in allowing excessively large buffers to
be allocated based on what the peer device claims the total message to
be. Instead, reject the message if it would not be possible to receive
it in full anyway.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-13 16:03:45 +03:00
Jouni Malinen
95f6f6a49d RADIUS/EAP server: Use longer username buffer to avoid truncation
If the peer provides a username with large part of it being non-ASCII
characters, the previously used buffers may not have been long enough to
include the full string in debug logs and database search due to forced
truncation of the string by printf_encode(). Avoid this by increasing
the buffer sizes to fit in the maximum result.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-06-02 17:36:51 +03:00
Jouni Malinen
10b58b5029 TNC: Allow TNC to be enabled dynamically
Previously, hostapd had to be started with at least one of the
configuration files enabling TNC for TNC to be usable. Change this to
allow TNC to be enabled when the first interface with TNC enabled gets
added during runtime.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-17 20:05:55 +03:00
Jouni Malinen
0a626a5060 TNC: Move common definitions into a shared header file
No need to duplicate these in multiple places.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-17 20:05:55 +03:00
Jouni Malinen
4075e4e862 TNC: Allow tnc_config file path to be replaced
This is for enabling easier testing of TNCS/TNCC functionality as part
of the test scripts without having to use the fixed /etc/tnc_config
location that could be used by the main system and would require changes
within /etc.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-17 20:05:55 +03:00
Jouni Malinen
f4626235de EAP-pwd server: Allow fragment_size to be configured
Previously, the fragment_size parameter was ignored and the default
value of 1020 was hardcoded.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-11 22:47:25 +03:00
Jouni Malinen
c876dcd70f EAP-IKEv2: Allow frag ack without integrity checksum
RFC 5106 is not exactly clear on the requirements for the "no data"
packet that is used to acknowledge a fragmented message. Allow it to be
processed without the integrity checksum data field since it is possible
to interpret the RFC as this not being included. This fixes reassembly
of fragmented frames after keys have been derived.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-11 22:47:25 +03:00
Jouni Malinen
0f73c642cc EAP-pwd: Fix processing of group setup failure
If invalid group was negotiated, compute_password_element() left some of
the data->grp pointer uninitialized and this could result in
segmentation fault when deinitializing the EAP method. Fix this by
explicitly clearing all the pointer with eap_zalloc(). In addition,
speed up EAP failure reporting in this type of error case by indicating
that the EAP method execution cannot continue anymore on the peer side
instead of waiting for a timeout.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-11 21:24:05 +03:00
Jouni Malinen
13e2574f7d EAP-pwd peer: Export Session-Id through getSessionId callback
EAP-pwd was already deriving the EAP Session-Id, but it was not yet
exposed through the EAP method API.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-11 21:22:55 +03:00
Jouni Malinen
48f668eecf EAP-pwd: Fix memory leak on error path with fragmentation
If fragmentation is used, the temporary inbuf/outbuf could have been
leaked in error cases (e.g., reaching maximum number of roundtrips).

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-06 00:34:30 +03:00
Jouni Malinen
8943cc998a RADIUS server: Add support for MAC ACL
"user" MACACL "password" style lines in the eap_user file can now be
used to configured user entries for RADIUS-based MAC ACL.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-29 19:31:56 +02:00
Jouni Malinen
390b92913a TLS testing: Allow hostapd to be used as a TLS testing tool
The internal TLS server implementation and RADIUS server implementation
in hostapd can be configured to allow EAP clients to be tested to
perform TLS validation steps correctly. This functionality is not
included in the default build; CONFIG_TESTING_OPTIONS=y in
hostapd/.config can be used to enable this.

When enabled, the RADIUS server will configure special TLS test modes
based on the received User-Name attribute value in this format:
<user>@test-tls-<id>.<rest-of-realm>. For example,
anonymous@test-tls-1.example.com. When this special format is used, TLS
test modes are enabled. For other cases, the RADIUS server works
normally.

The following TLS test cases are enabled in this commit:
1 - break verify_data in the server Finished message
2 - break signed_params hash in ServerKeyExchange
3 - break Signature in ServerKeyExchange

Correctly behaving TLS client must abort connection if any of these
failures is detected and as such, shall not transmit continue the
session.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-09 18:47:09 +02:00
Jouni Malinen
994afe3390 RADIUS server: Allow TLS implementation add log entries
This allows the internal TLS implementation to write log entries to the
same authlog with rest of the RADIUS server and EAP server
functionality.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-09 18:21:13 +02:00
Jouni Malinen
01f7fe10ef RADIUS server: Allow EAP methods to log into SQLite DB
This extends RADIUS server logging capabilities to allow EAP server
methods to add log entries.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-09 18:21:13 +02:00