Commit graph

2222 commits

Author SHA1 Message Date
Jouni Malinen
677c2283e7 tests: Update eap_proto_psk_errors and ap_wpa2_eap_psk_oom
The extension of aes_128_ctr_encrypt() to allow AES-192 and AES-256 to
be used in addition to AES-128 for CTR mode encryption resulted in the
backtrace for the function calls changing. Update the test cases that
started failing due to that change.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-10 20:27:31 +03:00
Jouni Malinen
a8ef83f49d tests: Mesh network and SELECT_NETWORK
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-10-09 17:09:56 +03:00
Michael Braun
150948e68b test: FT: EAP test for mismatching keys
Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
2016-10-09 12:02:23 +03:00
Michael Braun
d0175d6e48 test: FT with locally generated PMK-R0/PMK-R1 from PSK
Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
2016-10-09 12:01:34 +03:00
Jouni Malinen
c64b454a2f tests: Fix wpas_ctrl_sched_scan_plans without WPA_TRACE
This test case did not clear sched_scan_plans if alloc_fail() resulted
in skipping the test case. This would result in the following
autoscan_exponential and autoscan_periodic test cases failing.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-03 11:35:42 +03:00
Avraham Stern
8181c13a8d tests: Fix cfg80211_tx_frame test
In case that a dedicated P2P Device interface is used, a new interface
must be create for a P2P group. Thus, in order to send mgmt
frames, attach a new WpaSupplicant object to the newly created group
and use this object for sending the frames.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2016-10-02 21:27:43 +03:00
Ilan Peer
401ff12799 tests: Use global control interface to remove P2P networks
Use the global control interface to remove P2P networks in
persistent_group_peer_dropped3 to support configurations that use a
dedicated P2P Device interface.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2016-10-02 21:16:55 +03:00
Avraham Stern
a71a3d6d46 tests: Fix p2p_ext_vendor_elem_assoc test with P2P Device interface
For configurations that use a dedicated P2P Device interface, which
mandates that a separate interface is used for the P2P group, vendor
specific IE's must be added to the VENDOR_ELEM_P2P_* frame types in
order to be used by the P2P group interface. The VENDOR_ELEM_ASSOC_REQ
(13) parameter would need to be issued on the group interface which
would be challenging to do due to timing in case a separate group
interface gets used.

In case a dedicated P2P Device interface is used, don't include a test
for VENDOR_ELEM_ASSOC_REQ to avoid failing this part of the test case.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2016-10-02 19:57:34 +03:00
Jouni Malinen
d57ca5cd45 tests: Fix ap_track_taxonomy to clear country code setting
This test case could have ended with the station devices still in US
regulatory domain and that could make a following test case fail in some
sequences. For example, "ap_track_taxonomy ibss_5ghz" sequence made
ibss_5ghz fail to see the regdom change event since there was not one
due to the US country code already being in use at the beginning of the
test case. Fix this by clearing the country code at the end of
ap_track_taxonomy.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-09-30 23:46:17 +03:00
Jouni Malinen
09b812c952 tests: Extend gas_anqp_get to cover MBO cases with non-MBO AP
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-09-30 22:45:03 +03:00
Jouni Malinen
5b71cb552b tests: Update server and user certificates (2015)
The previous versions expired, so need to re-sign these to fix number of
the EAP test cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-09-30 22:45:03 +03:00
Jouni Malinen
a39a54517a tests: Long P2P_LISTEN and offchannel TX
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-09-27 00:43:27 +03:00
Jouni Malinen
7084c4d489 tests: WNM BSS Transition Management request getting rejected
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-09-25 17:31:26 +03:00
Jouni Malinen
62066bef69 tests: MBO and ignoring disallowed association
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-09-25 17:31:26 +03:00
Jouni Malinen
f75a0c0c0c tests: Fix a typo in a debug message (mbo_assoc_disallow)
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-09-25 17:31:26 +03:00
Jouni Malinen
80b84fb2d2 tests: Update MBO test cases for non_pref_chan changes
The reason_detail field was removed from the implementation, so the test
cases need matching changes.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-09-25 17:31:26 +03:00
Mikael Kanstrup
7137c7daee tests: Add testcase for reconnect failure due to auth timeout
Add testcase to verify a failed reconnect attempt due to authentication
timeout blacklists the correct AP. Driver capabilities are forced to
non-SME and driver roaming (BSS selection) mode.

Signed-off-by: Mikael Kanstrup <mikael.kanstrup@sonymobile.com>
2016-09-23 17:36:55 +03:00
Mikael Kanstrup
d258c70f96 tests: Add testcase for (reassoc) roam failure due to auth timeout
Add testcase to verify failed roaming attempt due to authentication
timeout blacklists the correct AP. Roaming attempt is performed
with the reassociate command and bssid_set=1. Driver capabilities
are forced to non-SME and driver roaming (BSS selection) mode.

Signed-off-by: Mikael Kanstrup <mikael.kanstrup@sonymobile.com>
2016-09-23 17:36:55 +03:00
Jouni Malinen
1c82fbf271 tests: Make pmksa_cache_{,opportunistic_}multiple_sta more robust
Clear wpa_supplicant scan cache before starting these test cases since
the ROAM command depends on the correct BSS entry being found.
scan_for_bss() does not enforce that correct entry to be present if
there was an earlier BSS entry with the same BSSID.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-09-23 17:36:14 +03:00
Jouni Malinen
78a37200f8 tests: Reset wlan5 device before RELOG command
This moves the wpa_supplicant debug entries from the end of a test case
using a dynamically added wlan5 interface to the correct test case,
i.e., the test case that added the interface instead of whatever test
case happens to follow this.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-09-23 16:03:59 +03:00
Jouni Malinen
50bb5c8627 tests: WPA-PSK AP and only rsn_pairwise set
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-09-23 11:45:55 +03:00
Ilan Peer
7487ef144e tests: Skip wpas_ap_dfs when MCC > 1
Skip wpas_ap_dfs in case that multi-channel is used, as
DFS operation is not supported in such a case.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2016-09-22 23:46:27 +03:00
Jouni Malinen
5c30a84b91 tests: mode=mesh in STATUS
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-09-22 23:20:48 +03:00
Jouni Malinen
425cb95337 tests: AP tracking STA taxonomy
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-09-22 00:45:24 +03:00
Jonathan Afek
44a4c52c86 tests: Setup wlantest once for qosmap tests
Some tests call the check_qos_map() function more than once. Make sure
each test sets up wlantest only once before the first time the function
is called.

The wlantest setup sets the channel for the wlantest interface and
executes the wlantest executable. It is more efficient to do that only
once for each test.

Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
2016-09-17 22:14:06 +03:00
Jonathan Afek
c7ca843d05 tests: Increase timeout for remote tests
Some operations take longer time on real hardware than on hwsim. This
commit increases two timeouts so that the tests will pass on real
hardware, too.

Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
2016-09-17 22:12:35 +03:00
Jonathan Afek
67a0d4f94e tests: Increase connection timeouts for remote tests
Use increased timeouts for connect and disconnect since these operations
take a longer time on real harware than they do on hwsim.

Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
2016-09-17 22:09:36 +03:00
Jouni Malinen
4ef3325fb6 tests: Dynamic Interworking element update
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-09-08 19:48:44 +03:00
Jouni Malinen
30ee6cc436 tests: FTM capability indication
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-09-05 21:43:36 +03:00
Jouni Malinen
ff22993594 tests: VHT with 80 MHz channel width and use_sta_nsts=1
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-09-05 21:16:40 +03:00
Jouni Malinen
cb320a6d2d tests: Allow regdb missing some op classes in mbo_supp_oper_classes
Not all installed regdb files include channels for global operating
classes 121-123, and 129.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-08-22 19:22:01 +03:00
Jouni Malinen
d952f02136 tests: Make FST kill_pid() more robust
It looks like the attempt to read the process id from a PID file can
return empty data. This resulted in kill_pid() failing to kill the
process and all the following FST test cases using the extra interface
failing. While the PID file is really supposed to have a valid PID value
when we get this far, it is better to try multiple times to avoid
failing large number of test cases.

The current os_daemonize() implementation ends up calling daemon() first
and then writing the PID file from the remaining process that is running
in the background. This leaves a short race condition where an external
process that started hostapd/wpa_supplicant could end up trying to read
the PID file before it has been written.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-08-22 17:44:05 +03:00
Jouni Malinen
7509b550f6 tests: hostapd and ctrl_iface commands when BSS not yet fully enabled
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-08-22 17:44:05 +03:00
Jouni Malinen
548d280162 tests: IAPP and multiple BSSes
This verifies IAPP socket registration from multiple hostapd interfaces.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-08-18 20:07:17 +03:00
Jouni Malinen
6b6286eb78 tests: hostapd and MIB ctrl_iface command with open network
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-08-18 10:42:56 +03:00
Jouni Malinen
26820b4fc1 tests: IEEE 802.1X + WEP reauthentication
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-08-17 13:40:40 +03:00
Jouni Malinen
e5d3e13a5c tests: Fix ap_wps_er_http_proto max concurrent requests case
Commit 2d6a526ac3 ('tests: Make
ap_wps_er_http_proto more robust') tried to work around the timeouts
here, but that was not really the best approach since the one second
timeout that was used here for connect() ended up being very close to
the limit even before the kernel change. The longer connect() time is
caused by a sequence where the listen() backlog ignores the connection
instead of accept() followed by close() within the wpa_supplicant ER
HTTP connection handling. The time to retransmit the SYN changed a bit
in the kernel from 1.0 sec to about 1.03 sec. This was enough to push
that over the one second timeout.

Fix this by using a sufficiently long timeout (10 sec) to allow SYN
retransmission to occur to recover from the listen() backlog case.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-08-17 13:37:25 +03:00
Jouni Malinen
50348c5c32 tests: More coverage for IBSS RSN OOM
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-08-14 00:22:50 +03:00
Jouni Malinen
a412157262 tests: IBSS RSN group rekeying
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-08-13 16:29:07 +03:00
Jouni Malinen
2d6a526ac3 tests: Make ap_wps_er_http_proto more robust
It looks like connect() for a TCP socket can time out at least with a
recent kernel. Handle that case more gracefully by ignoring that socket
while allowing the test to continue.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-08-11 15:58:13 +03:00
Jouni Malinen
f27b9277d5 tests: Make FST config tests more robust and easier to debug
It looks like it is possible for the separate started wpa_supplicant
process to remain running after a test case like fst_sta_config_default.
This would result in failures to run any following test case that uses
the wlan5 interface. Try to kill the process more thoroughly by waiting
for the PID file to show up and write more details into the logs to make
it easier to debug issues in this area.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-08-10 17:55:20 +03:00
Jouni Malinen
96485214f7 tests: HT/VHT values in STATUS
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-08-02 17:43:38 +03:00
Jouni Malinen
1b8ef4061c tests: WEP with HT/VHT
Verify that HT/VHT gets disabled in WEP configuration.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-08-02 17:43:26 +03:00
Jouni Malinen
ce4af56322 tests: DRIVER_FLAGS command
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-23 20:51:55 +03:00
Jouni Malinen
d9ed0ce65e tests: WPA2-PSK AP with station using SA Query local failures
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-18 00:58:27 +03:00
Jouni Malinen
e0a9370b3f tests: Overlapping BSS scan request (HT40+)
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-18 00:14:34 +03:00
Jouni Malinen
dcbb5d808b tests: FT OOM in SME
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-18 00:14:14 +03:00
Jouni Malinen
674af173fe tests: AP with open mode and driver operations failing
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-17 23:49:44 +03:00
Jouni Malinen
28be769bc3 tests: SAE and invalid anti-clogging token request
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-17 17:53:25 +03:00
Jouni Malinen
dcd54211c4 tests: IEEE 802.1X connection using dynamic WEP104 when WPA enabled
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-17 17:34:16 +03:00