Commit graph

1465 commits

Author SHA1 Message Date
Jouni Malinen
4d64fd37b7 Allow RSNE in EAPOL-Key msg 3/4 to be replaced for testing purposes
The new hostapd configuration parameter rsne_override_eapol can now be
used similarly to the previously added rsnxe_override_eapol to override
(replace contents or remove) RSNE in EAPOL-Key msg 3/4. This can be used
for station protocol testing to verify sufficient checks for RSNE
modification between the Beacon/Probe Response frames and EAPOL-Key msg
3/4.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-03-07 16:45:52 +02:00
Jouni Malinen
200c7693c9 Make WEP functionality an optional build parameter
WEP should not be used for anything anymore. As a step towards removing
it completely, move all WEP related functionality to be within
CONFIG_WEP blocks. This will be included in builds only if CONFIG_WEP=y
is explicitly set in build configuration.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-02-29 17:45:25 +02:00
Alexander Wetzel
0e05e8781a Simplify wpa_deny_ptk0_rekey documentation
Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
2020-02-23 23:59:58 +02:00
Alexander Wetzel
a5944db04a Add wpa_deny_ptk0_rekey to AP get_config() output
Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
2020-02-23 23:58:19 +02:00
Janusz Dziedzic
4b04223f24 hostapd: Replace UDP ctrl_iface global cookies with per-instance ones
The cookie values for UDP control interface commands was defined as a
static global array. This did not allow multi-BSS test cases to be
executed with UDP control interface. For example, after
    hapd1 = hostapd.add_bss(apdev[0], ifname1, 'bss-1.conf')
    hapd2 = hostapd.add_bss(apdev[0], ifname2, 'bss-2.conf')

hapd1->ping() did not work.

Move those cookie values to per-instance location in struct
hapd_interfaces and struct hostapd_data to fix this.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@gmail.com>
2020-02-23 17:48:34 +02:00
Janusz Dziedzic
12fb9698ab Use IFNAME= prefix for global UDP control interface events
There does not seem to be a good reason for using the different IFACE=
prefix on the UDP control interface. This got added when the UDP
interface in wpa_supplicant was extended in commit f0e5d3b5c6
("wpa_supplicant: Share attach/detach/send UDP ctrl_iface functions")
and that was then extended to hostapd in commit e920805685 ("hostapd:
Extend global control interface notifications").

Replace the IFACE= prefix in UDP case with IFNAME= to be consistent with
the UNIX domain socket based control interface.

This fixes a problem when at least one test case fail (hapd_ctrl_sta)
when remote/udp used. This also fixes test_connectivity().

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@gmail.com>
2020-02-23 15:40:58 +02:00
Alexander Wetzel
1a7963e36f AP: Allow PTK rekeying without Ext KeyID to be disabled as a workaround
Rekeying a pairwise key using only keyid 0 (PTK0 rekey) has many broken
implementations and should be avoided when using or interacting with
one. The effects can be triggered by either end of the connection and
range from hardly noticeable disconnects over long connection freezes up
to leaking clear text MPDUs.

To allow affected users to mitigate the issues, add a new hostapd
configuration option "wpa_deny_ptk0_rekey" to replace all PTK0 rekeys
with disconnection. This requires the station to reassociate to get
connected again and as such, can result in connectivity issues as well.

Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
2020-02-23 12:22:49 +02:00
Jouni Malinen
f3bcd69603 Remove CONFIG_IEEE80211N build option
Hardcoded CONFIG_IEEE80211N to be included to clean up implementation.
More or less all new devices support IEEE 802.11n (HT) and there is not
much need for being able to remove that functionality from the build.
Included this unconditionally to get rid of one more build options and
to keep things simpler.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-02-22 19:20:44 +02:00
Jouni Malinen
92d407dbd6 hostapd configuration for Beacon protection
Add a new hostapd configuration parameter beacon_prot=<0/1> to allow
Beacon protection to be enabled.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-02-17 23:48:24 +02:00
Didier Raboud
8155b36fae Fix VERSION_STR printf() calls in case the postfix strings include %
Do not use VERSION_STR directly as the format string to printf() since
it is possible for that string to contain '%'.

Signed-off-by: Didier Raboud <odyx@debian.org>
2020-02-17 19:17:10 +02:00
Jouni Malinen
466e48dcd7 HT: Remove SMPS in AP mode
SM Power Save was described in somewhat unclear manner in IEEE Std
802.11n-2009 as far the use of it locally in an AP to save power. That
was clarified in IEEE Std 802.11-2016 to allow only a non-AP STA to use
SMPS while the AP is required to support an associated STA doing so. The
AP itself cannot use SMPS locally and the HT Capability advertisement
for this is not appropriate.

Remove the parts of SMPS support that involve the AP using it locally.
In practice, this reverts the following commits:
04ee647d58 ("HT: Let the driver advertise its supported SMPS modes for AP mode")
8f461b50cf ("HT: Pass the smps_mode in AP parameters")
da1080d721 ("nl80211: Advertise and configure SMPS modes")

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-02-16 13:58:54 +02:00
John Crispin
0cb39f4fd5 HE: Extend BSS color support
The HE Operation field for BSS color consists of a disabled, a partial,
and 6 color bits. The original commit adding support for BSS color
considered this to be a u8. This commit changes this to the actual
bits/values.

This adds an explicit config parameter for the partial bit. The disabled
is set to 0 implicitly if a bss_color is defined.

Interoperability testing showed that stations will require a BSS color
to be set even if the feature is disabled. Hence the default color is 1
when none is defined inside the config file.

Signed-off-by: John Crispin <john@phrozen.org>
2020-02-16 12:32:17 +02:00
Tomasz Jankowski
fde8e79463 WPS: Make it possible to use PSKs loaded from the PSK file
By default, when configuration file set wpa_psk_file, hostapd generated
a random PSK for each Enrollee provisioned using WPS and appended that
PSK to wpa_psk_file.

Changes that behavior by adding a new step. WPS will first try to use a
PSK from wpa_psk_file. It will only try PSKs with wps=1 tag.
Additionally it'll try to match enrollee's MAC address (if provided). If
it fails to find an appropriate PSK, it falls back to generating a new
PSK.

Signed-off-by: Tomasz Jankowski <tomasz.jankowski@plume.com>
2020-02-15 17:28:00 +02:00
Jouni Malinen
31d7fe9171 Add GET_PMK for fetching the current PMK for a STA from hostapd
This test functionality (CONFIG_TESTING_OPTIONS=y) can be used to fetch
the current PMK for a STA.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-02-10 02:52:48 +02:00
Jouni Malinen
312eac1d1e DPP: Add ASN.1 support into build
This will be needed in following patches to process DPPEnvelopedData.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-31 23:16:05 +02:00
Jouni Malinen
5e287724ee DPP: NFC negotiated connection handover
Add new control interface commands "DPP_NFC_HANDOVER_REQ own=<id>
uri=<URI>" and "DPP_NFC_HANDOVER_SEL own=<id> uri=<URI>" to support NFC
negotiated connection handover. These commands are used to report a DPP
URI received from a peer NFC Device in Handover Request and Handover
Select messages. The commands return peer bootstrapping information ID
or FAIL on failure. The returned ID is used similarly to any other
bootstrapping information to initiate DPP authentication.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-27 20:36:09 +02:00
Jouni Malinen
65a44e849a OWE: PTK derivation workaround in AP mode
Initial OWE implementation used SHA256 when deriving the PTK for all OWE
groups. This was supposed to change to SHA384 for group 20 and SHA512
for group 21. The new owe_ptk_workaround parameter can be used to enable
workaround for interoperability with stations that use SHA256 with
groups 20 and 21. By default, only the appropriate hash function is
accepted. When workaround is enabled (owe_ptk_workaround=1), the
appropriate hash function is tried first and if that fails, SHA256-based
PTK derivation is attempted. This workaround can result in reduced
security for groups 20 and 21, but is required for interoperability with
older implementations. There is no impact to group 19 behavior.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-24 00:47:41 +02:00
Jouni Malinen
10bdce692d Fix a typo in an example configuration file comment
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-24 00:08:12 +02:00
Jouni Malinen
ce26f0086c Fix coloc_intf_reporting config param in hostapd in non-OWE builds
This has nothing to do with OWE and parsing of this value was not
supposed to be within an ifdef CONFIG_OWE block.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-24 00:08:10 +02:00
Jouni Malinen
e36a5894d0 SAE: Use H2E whenever Password Identifier is used
IEEE P802.11-REVmd was modified to require H2E to be used whenever
Password Identifier is used with SAE.

See this document for more details of the approved changes:
https://mentor.ieee.org/802.11/dcn/19/11-19-2154-02-000m-sae-anti-clogging-token.docx

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-01-21 13:13:56 +02:00
Daniel Golle
fa308a6496 hostapd: Fix a typo in sample configuration
'assocition' -> 'association'

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2020-01-20 19:09:52 +02:00
Alexander Wetzel
e1650a7b0e tests: Set key_flag when using SET_KEY
Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
2020-01-09 12:38:36 +02:00
Alexander Wetzel
a919a26035 Introduce and add key_flag
Add the new set_key() parameter "key_flag" to provide more specific
description of what type of a key is being configured. This is needed to
be able to add support for "Extended Key ID for Individually Addressed
Frames" from IEEE Std 802.11-2016. In addition, this may be used to
replace the set_tx boolean eventually once all the driver wrappers have
moved to using the new key_flag.

The following flag are defined:

  KEY_FLAG_MODIFY
    Set when an already installed key must be updated.
    So far the only use-case is changing RX/TX status of installed
    keys. Must not be set when deleting a key.

  KEY_FLAG_DEFAULT
    Set when the key is also a default key. Must not be set when
    deleting a key. (This is the replacement for set_tx.)

  KEY_FLAG_RX
    The key is valid for RX. Must not be set when deleting a key.

  KEY_FLAG_TX
    The key is valid for TX. Must not be set when deleting a key.

  KEY_FLAG_GROUP
    The key is a broadcast or group key.

  KEY_FLAG_PAIRWISE
    The key is a pairwise key.

  KEY_FLAG_PMK
    The key is a Pairwise Master Key (PMK).

Predefined and needed flag combinations so far are:

  KEY_FLAG_GROUP_RX_TX
    WEP key not used as default key (yet).

  KEY_FLAG_GROUP_RX_TX_DEFAULT
    Default WEP or WPA-NONE key.

  KEY_FLAG_GROUP_RX
    GTK key valid for RX only.

  KEY_FLAG_GROUP_TX_DEFAULT
    GTK key valid for TX only, immediately taking over TX.

  KEY_FLAG_PAIRWISE_RX_TX
    Pairwise key immediately becoming the active pairwise key.

  KEY_FLAG_PAIRWISE_RX
    Pairwise key not yet valid for TX. (Only usable with Extended Key ID
    support.)

  KEY_FLAG_PAIRWISE_RX_TX_MODIFY
    Enable TX for a pairwise key installed with KEY_FLAG_PAIRWISE_RX.

  KEY_FLAG_RX_TX
    Not a valid standalone key type and can only used in combination
    with other flags to mark a key for RX/TX.

This commit is not changing any functionality. It just adds the new
key_flag to all hostapd/wpa_supplicant set_key() functions without using
it, yet.

Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
2020-01-09 12:38:36 +02:00
Gurumoorthi Gnanasambandhan
4d3ae54fbd Add vlan_id to driver set_key() operation
This is in preparation for adding support to use a single WLAN netdev
with VLAN operations offloaded to the driver. No functional changes are
included in this commit.

Signed-off-by: Gurumoorthi Gnanasambandhan <gguru@codeaurora.org>
2020-01-09 00:48:57 +02:00
Bilal Hatipoglu
3d41dd7c50 WPS: Add application extension data to WPS IE
Application Extension attribute is defined in WSC tech spec v2.07 page
104. Allow hostapd to be configured to add this extension into WPS IE in
Beacon and Probe Response frames. The implementation is very similar to
vendor extension.

A new optional entry called "wps_application_ext" is added to hostapd
config file to configure this. It enodes the payload of the Application
Extension attribute in hexdump format.

Signed-off-by: Veli Demirel <veli.demirel@airties.com>
Signed-off-by: Bilal Hatipoglu <bilal.hatipoglu@airties.com>
2020-01-04 23:39:30 +02:00
Jouni Malinen
8d84c75f7c Allow testing override for GTK/IGTK RSC from AP to STA
The new hostapd gtk_rsc_override and igtk_rsc_override configuration
parameters can be used to set an override value for the RSC that the AP
advertises for STAs for GTK/IGTK. The contents of those parameters is a
hexdump of the RSC in little endian byte order.

This functionality is available only in CONFIG_TESTING_OPTIONS=y builds.
This can be used to verify that stations implement initial RSC
configuration correctly for GTK/ and IGTK.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-01-04 13:05:26 +02:00
Jouni Malinen
3710027463 Make hostapd_drv_send_mlme() more generic
Merge hostapd_drv_send_mlme_csa() functionality into
hostapd_drv_send_mlme() to get a single driver ops handler function for
hostapd. In addition, add a new no_encrypt parameter in preparation for
functionality that is needed to get rid of the separate send_frame()
driver op.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-01-03 13:34:37 +02:00
Roy Marples
a8b00423ea BSD: Use struct ip rather than struct iphdr
As we define __FAVOR_BSD use the BSD IP header.
Compile tested on NetBSD, DragonFlyBSD, and Linux.

Signed-off-by: Roy Marples <roy@marples.name>
2020-01-02 19:17:10 +02:00
Jouni Malinen
1ace2f7c09 Drop debug print level for informative debug messages
These are certainly not error conditions, but normal cases for starting
up. Drop the message from ERROR to DEBUG.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-01-02 18:05:12 +02:00
Andrei Otcheretianski
522450b7b1 AP: Determine Short SSID value for the BSS
This can be used in the future to implement support for RNR and scanning
extensions using a shorter field for the SSID.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2019-12-28 22:32:14 +02:00
Jouni Malinen
53661e3a9a Allow debug log to be written to both syslog and file
If hostapd or wpa_supplicant is started with both -s and -f command line
arguments, debug log ended up being written only into syslog and the log
file was left empty. Change this so that the log entries will be written
to both places. Either -s or -f (or both) results in debug log to stdout
being disabled which was already the case.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-12-28 18:28:10 +02:00
Ben Greear
ee48f48ba1 hostapd: Support showing neighbor list through hostapd_cli
This lets one know the current neighbor list, and could be used
to populate the neighbor list of other hostapd processes.

For instance:

$ hostapd_cli -i vap0001 show_neighbor
04:f0:21:1e:ae:b0 ssid=04f0211eaeb0af190000802809 nr=04f0211eaeb0af1900008028090603022a00
$ hostapd_cli -i vap0000 set_neighbor 04:f0:21:1e:ae:b0 ssid=04f0211eaeb0af190000802809 nr=04f0211eaeb0af1900008028090603022a00
OK
$ hostapd_cli -i vap0000 show_neighbor
04:f0:21:1e:ae:b0 ssid=04f0211eaeb0af190000802809 nr=04f0211eaeb0af1900008028090603022a00
04:f0:21:c3:b2:b0 ssid=04f021c3b2b0af190000802809 nr=04f021c3b2b0af1900008028090603022a00

Signed-off-by: Ben Greear <greearb@candelatech.com>
2019-12-26 17:59:03 +02:00
Ben Greear
70755e6587 Allow removing neighbor DB entries by BSSID alone
Let users delete a neighbor by BSSID alone if they prefer. The
underlying code already properly handled a NULL SSID, so just relax the
control interface command calling restrictions.

Signed-off-by: Ben Greear <greearb@candelatech.com>
2019-12-26 11:01:37 +02:00
Bilal Hatipoglu
0b1839405e Add "reconnect" cmdline argument to hostapd_cli/wpa_cli
When the newly added "-r" parameter is used, both clis will try to
reconnect forever on connection lost until signalled (ctrl+c) or
terminated. This is useful only when used with -a to take action to
retrieve events or get status and the cli process stays even if
hostapd/wpa_supplicant daemons restart for some reason (e.g.,
configuration change).

Signed-off-by: Veli Demirel <veli.demirel@airties.com>
Signed-off-by: Bilal Hatipoglu <bilal.hatipoglu@airties.com>
2019-12-25 20:54:44 +02:00
Jouni Malinen
efaa6256e2 More detailed documentation on ieee80211w configuration parameter
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-12-23 10:48:09 +02:00
Ankita Bajaj
da8570f4c9 Allow non-PCS 6 GHz channels to be excluded from ACS
Add support to exclude non-PSC 6 GHz channels from the input frequency
list to ACS. The new acs_exclude_6ghz_non_psc=1 parameter can be used by
6 GHz only APs.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-20 13:23:13 +02:00
Ankita Bajaj
59bb72642a Allow ACS channel list to be configured as frequencies (in MHz)
The channel numbers are duplicated between 2.4 GHz / 5 GHz bands and 6
GHz band. Hence, add support to configure a list of frequencies to ACS
(freqlist) instead of a list of channel numbers (chanlist). Also, both 5
GHz and 6 GHz channels are referred by HOSTAPD_MODE_IEEE80211A. The 6
GHz channels alone can be configured by using both mode and frequency
list.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-20 13:19:52 +02:00
Jouni Malinen
f2c4b44b40 SAE H2E: RSNXE override in EAPOL-Key msg 3/4
This new hostapd configuration parameter rsnxe_override_eapol=<hexdump>
can be used to override RSNXE value in EAPOL-Key msg 3/4 for testing
purposes.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-07 17:32:17 +02:00
Jouni Malinen
e780b4bf20 DPP: Bootstrapping via NFC URI Record
This extends hostapd and wpa_supplicant DPP implementation to allow the
bootstrapping URI to be generated for and parsed from an NFC Tag with an
NFC URI Record. This is similar to the way the bootstrapping URI is used
with QR Code for unidirectional authentication.

The DPP_BOOTSTRAP_GEN command uses "type=nfc-uri" to request the URI to
be assigned for NFC URI Record. In practice, the URI is generated
identically to the QR Code case, but the internal entry maintains the
NFC-URI type.

A new command "DPP_NFC_URI <uri>" can now be used to parse the URI read
from an NFC Tag with the NFC URI Record. This is similar to the
DPP_QR_CODE command.

Other commands (mainly, DPP_LISTEN and DPP_AUTH_INIT) are used for NFC
URI in the same way as they are used for QR Code.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-05 12:37:51 +02:00
Hu Wang
38203148e9 Extend hostapd to support setband to driver via QCA vendor command
Commit 844dfeb804 ("QCA vendor command support to set band to driver")
added a vendor command to pass 'SET setband' command information to the
driver in wpa_supplicant. Add similar changes to hostapd control
interface.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-02 15:55:43 +02:00
Veerendranath Jakkam
3c13af5573 hostapd: Register wpa_msg callback even if only global ctrl_iface is used
Previously, wpa_msg_register_cb() was called only from successful
completion of per-interface control interface initialization. This would
leave the callback unregistered in case only the global control
interface is used which would result in not delivering control interface
events on the global interface. Fix this by registering the callback
handler also from successful initialization of the global control
interface.

Signed-off-by: Veerendranath Jakkam <vjakkam@codeaurora.org>
2019-12-02 15:46:32 +02:00
Veerendranath Jakkam
e920805685 hostapd: Extend global control interface notifications
Previously, hostapd sent only WPA_MSG_ONLY_GLOBAL type notifications to
the global control interface and all other notifications to
per-interface control interface. Extend this by making it similar to
wpa_supplicant global control interface notifications handling. With
this hostapd now sends all notifications except WPA_MSG_NO_GLOBAL to the
global control interface. In addition, WPA_MSG_PER_INTERFACE type
messages will be prefixed with "IFNAME=<interface name> " while sending
to the global control interface to indicate that the message is
interface specific.

Signed-off-by: Veerendranath Jakkam <vjakkam@codeaurora.org>
2019-12-02 15:44:52 +02:00
Brian Norris
a32acf3918 Fix hostapd build with CONFIG_WPA_TRACE but no CONFIG_WPA_TRACE_BFD
Otherwise, we may get linker failures:

  ld.lld: error: unable to find library -lbfd

While we're at it, pull in the library selection fixes from commit
848905b12a ("Avoid undefined references with CONFIG_WPA_TRACE_BFD=y").

Signed-off-by: Brian Norris <briannorris@chromium.org>
2019-10-25 16:03:37 +03:00
Andrei Otcheretianski
d7c2c5c98c AP: Add initial support for 6 GHz band
Add support for new hardware mode for 6 GHz band. 6 GHz operation is
defined in IEEE P802.11ax/D4.3. 6 GHz band adds global operating classes
131-135 that define channels in frequency range from 5940 MHz to 7105
MHz.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>

- Remove HOSTAPD_MODE_IEEE80211AX mode
- Replace check for HOSTAPD_MODE_IEEE80211AX with is_6ghz_freq()
- Move center_idx_to_bw_6ghz() to ieee802_11_common.c file

Signed-off-by: Vamsi Krishna <vamsin@codeaurora.org>
2019-10-15 15:39:22 +03:00
Liangwei Dong
a5b2faa714 AP: Add op_class config item to specify 6 GHz channels uniquely
Add hostapd config option "op_class" for fixed channel selection along
with existing "channel" option. "op_class" and "channel" config options
together can specify channels across 2.4 GHz, 5 GHz, and 6 GHz bands
uniquely.

Signed-off-by: Liangwei Dong <liangwei@codeaurora.org>
Signed-off-by: Vamsi Krishna <vamsin@codeaurora.org>
2019-10-15 15:39:22 +03:00
Jouni Malinen
43b20b4370 SAE: Derive H2E PT in AP when starting the AP
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-15 15:39:22 +03:00
Jouni Malinen
a36e13a7cd SAE: Add sae_pwe configuration parameter for hostapd
This parameter can be used to specify which PWE derivation mechanism(s)
is enabled. This commit is only introducing the new parameter; actual
use of it will be address in separate commits.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-15 15:39:22 +03:00
Jouni Malinen
f7fe055224 SAE: Allow AP behavior for SAE Confirm to be configured
hostapd is by default waiting STA to send SAE Confirm before sending the
SAE Confirm. This can now be configured with sae_confirm_immediate=1
resulting in hostapd sending out SAE Confirm immediately after sending
SAE Commit.

These are the two different message sequences:

sae_confirm_immediate=0
STA->AP: SAE Commit
AP->STA: SAE Commit
STA->AP: SAE Confirm
AP->STA: SAE Confirm
STA->AP: Association Request
AP->STA: Association Response

sae_confirm_immediate=1
STA->AP: SAE Commit
AP->STA: SAE Commit
AP->STA: SAE Confirm
STA->AP: SAE Confirm
STA->AP: Association Request
AP->STA: Association Response

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-10 15:38:26 +03:00
Alexei Avshalom Lazar
5c5ff22efc hostapd: Add EDMG channel configuration parameters
Add two new configuration parameters for hostapd:
enable_edmg: Enable EDMG capability for AP mode in the 60 GHz band
edmg_channel: Configure channel bonding for AP mode in the 60 GHz band

Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org>
2019-10-07 16:46:29 +03:00
Jouni Malinen
5a5639b068 DPP: Allow name and mudurl to be configured for Config Request
The new hostapd and wpa_supplicant configuration parameters dpp_name and
dpp_mud_url can now be used to set a specific name and MUD URL for the
Enrollee to use in the Configuration Request. dpp_name replaces the
previously hardcoded "Test" string (which is still the default if an
explicit configuration entry is not included). dpp_mud_url can
optionally be used to add a MUD URL to describe the Enrollee device.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-09-19 00:21:47 +03:00