Commit graph

226 commits

Author SHA1 Message Date
Jouni Malinen
1c243e402b tests: FILS SK with PFS
Signed-off-by: Jouni Malinen <j@w1.fi>
2017-03-12 23:23:09 +02:00
Jouni Malinen
6bb32582df tests: Extend PMKSA output parser to handle FILS Cache Identifier
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-21 12:51:48 +02:00
Jouni Malinen
c0dd37f5f8 tests: AP with Probe Response frame sending from hostapd disabled
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-12-29 12:42:49 +02:00
Jouni Malinen
bb5d761c2e tests: Do not attach wpa_supplicant monitor interface unnecessarily
There is no need to attach the monitor interface was events when issuing
only a single INTERFACES command.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-12-14 13:56:15 +02:00
Jouni Malinen
10f312d4a6 tests: Use longer timeout in p2p_go_neg_auth_result()
It is possible for the P2P-GROUP-STARTED event to get delayed more than
one second especially when the GO Negotiation responder becomes the P2P
Client and the system is heavily loaded. Increase the default timeout
for the expected success case from 1 to 5 seconds to avoid failing test
cases that would have succeeded if given a bit more time to complete the
exchange.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-12-14 12:45:37 +02:00
Jouni Malinen
79124c7ba1 tests: Scan and only_new=1 multiple times
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-12-10 17:04:08 +02:00
Jouni Malinen
dff690b859 tests: Random MAC address in scans while connected
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-11-25 22:52:39 +02:00
Jonathan Afek
c7ca843d05 tests: Increase timeout for remote tests
Some operations take longer time on real hardware than on hwsim. This
commit increases two timeouts so that the tests will pass on real
hardware, too.

Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
2016-09-17 22:12:35 +03:00
Jonathan Afek
67a0d4f94e tests: Increase connection timeouts for remote tests
Use increased timeouts for connect and disconnect since these operations
take a longer time on real harware than they do on hwsim.

Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
2016-09-17 22:09:36 +03:00
Jouni Malinen
604f559ae4 tests: Hotspot 2.0 and failures during profile configuration
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-04 17:49:57 +03:00
Jouni Malinen
bc6e32880f tests: Remove extra semicolons from python scripts
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-03 22:37:01 +03:00
Jouni Malinen
e9f2d54f44 tests: Use shell in local cmd_execute() only if needed
The generic cmd_execute() function was introduced in a manner that
converted the argument array to a string and used shell to run the
command unconditionally. This is not really desirable, so move back to
using the command array by default and use the single command string
with a shell only when really needed.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-27 21:10:35 +03:00
Jonathan Afek
7fd9fbc27d tests: Add functions to execute shell commands on interface host
Add the feature to execute shell commands on each wpa_supplicant/hostapd
interface host. When executing remote tests the interfaces are not all
on a single host so when executing shell commands the test needs to
execute the command on the host which the interface relevant for the
command is on. This patch enables tests to execute the command on the
relevant host.

Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
2016-06-19 23:48:07 +03:00
Jonathan Afek
d28cfc2a25 tests: Support P2P group interfaces in hwsim remote tests
Start using the wpa_supplicant remote UDP interface for the control and
monitor sockets for P2P group interfaces so that P2P tests would work on
real hardware. Also have the group requests and events show in the test
log with the hostname and the interface name of the group interface.

Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
2016-05-30 17:56:43 +03:00
Jouni Malinen
a68a749322 tests: P2P group formation using P2PS method without specifying PIN
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-05-20 23:37:51 +03:00
Jouni Malinen
50d06776c6 tests: Fix WEXT testing
Commit afb2e8b891 ('tests: Store P2P
Device ifname in class WpaSupplicant') did not take into account the
possibility of capa.flags not existing in get_driver_status() and broke
WEXT test cases. Fix this by checking that capa.flags is present before
looking at its value.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-05-14 18:59:47 +03:00
Jouni Malinen
df49b90e35 tests: Secure mesh and the first plink Open dropped
This is a regression test case to verify that MTK is calculated properly
also in this unexpected sequence.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-05-13 20:54:51 +03:00
Jouni Malinen
0663ae22ff tests: Do not use tabs for indentation
Be more consistent with indentation (always uses spaces in Python
files).

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-04-25 00:19:40 +03:00
Avraham Stern
5e65346ade tests: persistent_group_profile_add to support P2P Device interface
Modify the persistent_group_profile_add test to support configurations
that use a dedicated P2P Device interface by sending the ADD_NETWORK and
SET_NETWORK commands on the global control interface and specifying the
P2P Device interface name.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2016-04-24 23:45:16 +03:00
Avraham Stern
afb2e8b891 tests: Store P2P Device ifname in class WpaSupplicant
Add an attribute to class WpaSupplicant with the name of the
P2P Device interface. If a separate interface is not used for
P2P Device, this attribute will hold the name of the only used
interface (with functions also as the P2P Device management
interface).

This attribute will be used to direct P2P related commands to the
P2P Device interface, which is needed for configurations that use
a separate interface for the P2P Device.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2016-04-24 23:24:06 +03:00
Jouni Malinen
5a766accee tests: Convert Host() class to use list of arguments instead of string
It is better to use a list of command line arguments for the local
execution case and convert that to a space-separated string for the
remote case.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-04-24 20:16:30 +03:00
Janusz Dziedzic
d4944fad72 tests: Improve debug logs in hostapd/wpasupplicant with remote commands
Show more info when we are using remote wpaspy and UDP-based control
interface.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-03-20 21:49:35 +02:00
Janusz Dziedzic
8ce4855b23 tests: hostapd.py/wpasupplicant.py use Host when executing commands
Execute commands using the Host class. This enables use of remote hosts
as well.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-03-20 21:49:26 +02:00
Jouni Malinen
2b5488a4e1 tests: Return result from WpaSupplicant::global_request() in all cases
The no self.global_iface case was not returning the result from the
self.request() case. While this is not really a path that is supposed to
be used, make it return the response since it is at least theoretically
possible to get here.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-03-20 11:08:12 +02:00
Janusz Dziedzic
e3b36d420e tests: Add terminate support for hostapd/wpa_supplicant
Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-03-05 17:44:51 +02:00
Janusz Dziedzic
0fd4792b48 tests: Add UDP ctrl_iface support to wpasupplicant.py
Allow use of a remote host using wpaspy.Ctrl with UDP ctrl_iface
support.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-03-05 17:44:51 +02:00
Jouni Malinen
a89faedc22 tests: EAP-TLS error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-02-02 00:39:39 +02:00
Jouni Malinen
8251be17be tests: Speed up discovery_group_client and nfc_p2p_client
There is no need for these to go through a full scan when the GO
operating channel is known.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-01-06 18:56:31 +02:00
Jouni Malinen
e4ab0d9034 tests: Do not dump pending events in p2p_go_neg_init timeout=0 case
It was possible for the dump_monitor() call to drop a P2P-GO-NEG-FAILURE
event that was indicated quickly after the P2P_CONNECT command was
issued. This could result in grpform_reject test case failing to see the
expected event and fail the test due to "Rejection not reported".

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-31 22:41:21 +02:00
Jouni Malinen
b90b3eab1f tests: Clear ignore_old_scan_res explicitly in test cases where it is used
This parameter is used only in couple of test cases and there is no need
to maintain the code to reset it in WpaSupplicant::reset().

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-28 17:48:01 +02:00
Jouni Malinen
49d51a0dcb tests: Clear p2p_pref_chan explicitly in test cases where it is used
This parameter is used only in couple of test cases and there is no need
to maintain the code to reset it in WpaSupplicant::reset().

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-28 17:43:46 +02:00
Jouni Malinen
db3070d289 tests: Clear p2p_go_intent explicitly in test cases where it is used
This parameter is used only in couple of test cases and there is no need
to maintain the code to reset it in WpaSupplicant::reset().

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-28 17:40:25 +02:00
Jouni Malinen
cf3a9d8f06 tests: Clear p2p_add_cli_chan explicitly in test cases where it is used
This parameter is used only in couple of test cases and there is no need
to maintain the code to reset it in WpaSupplicant::reset().

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-28 17:33:17 +02:00
Jouni Malinen
721ec02da5 tests: Clear p2p_no_go_freq explicitly in test cases where it is used
This parameter is used only in couple of test cases and there is no need
to maintain the code to reset it in WpaSupplicant::reset().

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-28 17:33:09 +02:00
Jouni Malinen
35b61a496a tests: Verify P2P group formation with 80+80 MHz channel
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-25 22:43:38 +02:00
Ilan Peer
061190308d tests: wpa_supplicant interface creation in AP mode
Add a test case that creates a new interface in AP mode.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-11-22 17:54:07 +02:00
Jouni Malinen
7f2fea59ea tests: P2P device discovery and control character in Device Name
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-10-26 23:43:45 +02:00
Ilan Peer
a537887074 tests: Add role parameter to asp_provision
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-10-11 21:42:03 +03:00
Andrei Otcheretianski
a3dc75020a tests: Add extended listen functions to WpaSupplicant
Add p2p_ext_listen() and p2p_cancel_ext_listen() functions.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2015-10-07 17:07:21 +03:00
Jouni Malinen
d9052150eb tests: wpa_supplicant control socket and event burst
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-04 18:52:38 +03:00
Jouni Malinen
9425bb7828 tests: Dualband AP rejecting authentication from dualband STA on 2.4 GHz
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-05 19:11:02 +03:00
Max Stepanov
c1e31bdb7f tests: Add CPT parameter to WpaSupplicant asp_provision()
Add an optional CPT parameter to asp_provision() method of
WpaSupplicant.

Signed-off-by: Max Stepanov <Max.Stepanov@intel.com>
Reviewed-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-07-27 00:47:19 +03:00
Andrei Otcheretianski
1a1b015622 tests: Add asp_provision method to wpa_supplicant
Add asp_provision method which issues either P2PS PD Request or, if the
status is provided, continues the deferred flow by sending follow on
PD Request.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Max Stepanov <Max.Stepanov@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-07-26 21:45:35 +03:00
Jouni Malinen
c0183847d9 tests: Silence unnecessary get_driver_status() prints
Commit 53606b105c ('tests: Wait for scan
to complete on all interfaces in reset()') added option of passing
ifname to get_driver_status(). This could result in FAIL-NO-IFNAME-MATCH
returns that get printed out in "Ignore unexpected status-driver line"
messages if the interface is not found. Check for this case to avoid
that unnecessary print.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 18:26:16 +03:00
Andrei Otcheretianski
53606b105c tests: Wait for scan to complete on all interfaces in reset()
When WpaSupplicant executes reset() it waits until all the ongoing scans
are completed. However, it checks the status of the wlanX interface
only. If a dedicated P2P device interface is used, scan may be still
running on the P2P Device interface, e.g., due to P2P_FIND. This might
affect subsequent tests.

Fix this by waiting until the scan is done both on wlanX and P2P
Device interfaces.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-07-08 16:52:42 +03:00
Ilan Peer
a2168cf476 tests: Modify reset() to use the global control interface
Change the reset() method to use the global control interface
for resetting P2P state and also add a call to P2P_FLUSH.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-06-19 10:38:22 +03:00
Jouni Malinen
c1e38fec75 tests: Make flush_scan_cache() more robust
There seem to be cases where flush_scan_cache() was unable to clear all
BSS entries due to a hidden SSID BSS (SSID length 0) showing up again
from cfg80211 BSS table. Check for this and run the flush operation
again if any entries remain.

This fixes an issue where the following hwsim test case sequence
resulted in the last test case failing due to the old BSS entry from the
first test case being in place and showing unexpected flags information:
ap_hs20_min_bandwidth_home_hidden_ssid_in_scan_res
ap_hs20_remediation_required
ap_mixed_security

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-06-12 21:28:14 +03:00
Ben Rosenfeld
8e751cfa05 tests: Change list_networks() to use global interface with P2P
list_networks() always used the wlanX control interface to query for the
current list of networks. However, when a dedicated P2P Device is used,
the global control interface should be used when checking persistent
group network profiles.

Fix this by adding an optional parameter indicating that the P2P
networks are requested, and in such a case use the global control
interface.

In addition update test_p2p_persistent to use the argument when needed.

Signed-off-by: Ben Rosenfeld <ben.rosenfeld@intel.com>
2015-05-08 18:29:03 +03:00
Ben Rosenfeld
09f60224a5 tests: Remove all P2P networks in call to reset
When resetting a device, remove all the P2P networks to prevent
unexpected behavior in following tests. This is needed for the case
where P2P Device interface is used.

Signed-off-by: Ben Rosenfeld <ben.rosenfeld@intel.com>
2015-05-07 21:14:31 +03:00
Oren Givon
2380d80493 tests: TDLS link status test
Add a test case for checking TDLS link status.

Signed-off-by: Oren Givon <oren.givon@intel.com>
2015-05-03 17:24:38 +03:00