Commit graph

1203 commits

Author SHA1 Message Date
Mikael Kanstrup
c04a67deb0 hostapd_cli: Add completion for get command
Add command completion support for get command.

Signed-off-by: Mikael Kanstrup <mikael.kanstrup@sonymobile.com>
2016-12-21 12:59:08 +02:00
Mikael Kanstrup
bf4167b9d5 hostapd_cli: Add completion for set command
Add command completion support for set command.

Signed-off-by: Mikael Kanstrup <mikael.kanstrup@sonymobile.com>
2016-12-21 12:57:54 +02:00
Mikael Kanstrup
86adff09e9 hostapd_cli: Completion for further commands with STA parameter
Yet some more commands take STA address as the only parameter. Add
command completion support for the following commands:

signature, sa_query, send_qos_map_conf and req_lci

Signed-off-by: Mikael Kanstrup <mikael.kanstrup@sonymobile.com>
2016-12-21 12:55:36 +02:00
Mikael Kanstrup
4f59ad0699 hostapd_cli: Use common completion for commands that use stations
More than one command takes STA address as the only parameter. Make use
of a common completion routine.

Signed-off-by: Mikael Kanstrup <mikael.kanstrup@sonymobile.com>
2016-12-21 12:54:24 +02:00
Mikael Kanstrup
62b95eb67e hostapd_cli: Add missing command help descriptions
Some commands are missing help description making them not show up in
the list of supported commands. Add command help description for all
missing commands.

Signed-off-by: Mikael Kanstrup <mikael.kanstrup@sonymobile.com>
2016-12-21 12:53:53 +02:00
Jouni Malinen
26bf70e3d2 FILS: Separate FILS realm configuration from ERP domain
The new hostapd configuration parameter fils_realm=<realm> can now be
used to configure one or more FILS realms to advertise for ERP domains
when using FILS. This replaces the use of erp_domain=<domain> parameter
for the FILS use case.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-12-17 22:08:23 +02:00
Jouni Malinen
20b1a9e238 Allow hostapd wep_key# parameters to be cleared
Setting wep_key# to an empty string will now clear a previously
configured key. This is needed to be able to change WEP configured AP to
using WPA/WPA2 through the hostapd control interface SET commands.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-12-05 21:28:50 +02:00
Michael Braun
34f7c699a6 Add multicast to unicast support
This adds support for nl80211 NL80211_CMD_SET_MULTICAST_TO_UNICAST
command.

By setting the new hostapd configuration option multicast_to_unicast=1,
hostapd configures this AP to perform multicast to unicast conversion.

When enabled, all multicast packets with ethertype ARP, IPv4, or IPv6
(possibly within an 802.1Q header) will be sent out to each station once
with the destination (multicast) MAC address replaced by the station's
MAC address. Note that this may break certain expectations of the
receiver, e.g., the ability to drop unicast IP packets encapsulated in
multicast L2 frames, or the ability to not send destination unreachable
messages in such cases.

This also does not implement Directed Multicast Service (DMS).

Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
2016-12-04 21:00:06 +02:00
Jouni Malinen
47d74bf010 Add MGMT_RX_PROCESS test command for hostapd
This makes it easier to write hwsim test cases to verify management
frame processing sequences with dropped or modified frames. When
ext_mgmt_frame_handling is used, this new command can be used to request
hostapd to process a received a management frame, e.g., based on
information reported in the MGMT-RX events.

This is more or less identical to the earlier wpa_supplicant commit
4de70e2330 ('Add MGMT_RX_PROCESS test
command for wpa_supplicant'), but for hostapd.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-11-29 16:26:00 +02:00
Purushottam Kushwaha
29483a5678 Add support for user configurable Beacon frame data rate for AP mode
Allow configuration of Beacon frame TX rate from hostapd.conf with
"beacon_rate=xx" option. The following format is used to set
legacy/HT/VHT beacon rates:

Legacy (CCK/OFDM rates):
	beacon_rate=<legacy rate in 100 kbps>
HT:
	beacon_rate=ht:<HT MCS>
VHT:
	beacon_rate=vht:<VHT MCS>

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-11-25 23:12:30 +02:00
Jouni Malinen
d503eeead1 FT: Complete CONFIG_IEEE80211R_AP renaming for hostapd
Commit 4ec1fd8e42 ('FT: Differentiate
between FT for station and for AP in build') renamed all
CONFIG_IEEE80211R instances within src/ap/* to CONFIG_IEEE80211R_AP, but
it did not change hostapd/* files to match. While this does not cause
much harm for normal use cases, this broke some test builds where
wpa_supplicant build is used to build in hostapd/*.c files for analysis.
Fix this by completing CONFIG_IEEE80211R_AP renaming.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-11-20 00:35:35 +02:00
Jouni Malinen
5acbf22bb0 Fix hostapd usage entry style for -T
Remove the extra equals sign from the line since hostapd usage text does
not have it for other entries either (while wpa_supplicant does and this
was likely copy-pasted from there).

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-11-19 22:20:14 +02:00
Jouni Malinen
fde3a53132 Rename a function argument to avoid shadowing a variable in global scope
Do not use optarg as a function argument since a variable with that name
is in the global scope.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-11-12 19:26:47 +02:00
Ilan Peer
4ec1fd8e42 FT: Differentiate between FT for station and for AP in build
Previously, CONFIG_IEEE80211R enabled build that supports FT for both
station mode and AP mode. However, in most wpa_supplicant cases only
station mode FT is required and there is no need for AP mode FT.

Add support to differentiate between station mode FT and AP mode FT in
wpa_supplicant builds by adding CONFIG_IEEE80211R_AP that should be used
when AP mode FT support is required in addition to station mode FT. This
allows binary size to be reduced for builds that require only the
station side FT functionality.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2016-10-29 22:14:54 +03:00
David Spinadel
451a27b1ad hostapd: Add a configuration to set an AP as stationary
Add a configuration option in hostapd.conf and in neighbor report that
sets an AP as stationary. To enable this option on the current AP set
the config option stationary_ap to 1. To set a neighbor entry to be
marked as stationary add the word stat to the SET_NEIGHBOR command. This
option tells hostapd to send LCI data even if it is older than requested
by max age subelement in RRM request.

Signed-off-by: David Spinadel <david.spinadel@intel.com>
2016-10-29 19:16:47 +03:00
Ilan Peer
5cb59370d5 hostapd: Clear location configuration when it is reset
In case that LCI or location civic configuration is cleared,
free the buffer holding the corresponding information to avoid
cases that the information is considered as valid/useful.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2016-10-29 19:11:59 +03:00
Kevin Mahoney
a818425d1c hostapd: Added signal level to STA tracking
Add signal level information to the station tracking information. Also
make it available via the "TRACK_STA_LIST" control command.

Signed-off-by: Kevin Mahoney <k.mahoney@cablelabs.com>
2016-10-29 00:55:49 +03:00
Michael Braun
a1047f55b8 Remove duplicate dl_list_init() for global_ctrl_dst
Commit 56885eecf4 ('hostapd: Add UDP
support for ctrl_iface') added dl_list_init() for global_ctrl_dst to
hostapd_global_ctrl_iface_init().

Though, hostapd_global_ctrl_iface_init() is only called from
main.c:main(), which already initializes global_ctrl_dst unconditionally
before. Same with global_ctrl_sock.

Remove this duplicate initialization.

Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
2016-10-29 00:55:49 +03:00
Dmitry Shmidt
3765c9705c hostapd_cli: Remove duplicate const in hostapd_cli_cmd()
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2016-10-29 00:55:38 +03:00
Jouni Malinen
e097556eef hostapd_cli: Mark number of char *cmd constant
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-10-16 12:30:32 +03:00
Mikael Kanstrup
4c43f44b29 cli: Add list_sta command
Add list_sta command to print addresses of all stations. Command
added to both wpa_cli and hostapd_cli.

Signed-off-by: Mikael Kanstrup <mikael.kanstrup@sonymobile.com>
2016-10-16 12:28:02 +03:00
Mikael Kanstrup
85bab32522 hostapd_cli: Process events received following control iface commands
Events received as an immediate result of control interface commands
end up on the control request message callback function instead of
the registered read socket. This makes for example the station list
used for complete functions for disassociate and deauthenticate out
of sync. Process events in the message callback function too to ensure
no events are missed.

Signed-off-by: Mikael Kanstrup <mikael.kanstrup@sonymobile.com>
2016-10-16 12:26:52 +03:00
Mikael Kanstrup
e054a4333e hostapd_cli: Refactor control iface reconnects with common helper
Code for connecting/reconnecting to the hostapd control interface
is found duplicated a number of times. Create a common reconnect
helper function to avoid code duplication.

Signed-off-by: Mikael Kanstrup <mikael.kanstrup@sonymobile.com>
2016-10-16 12:26:42 +03:00
Mikael Kanstrup
aa2ab916ef hostapd_cli: Refresh stations list on control interface reconnect
Whenever reconnecting the control interface the hostapd station list
is unknown as stations might have dropped or connected. Refresh the
list of stations used for command completion on cli connect, reconnect
and interface change.

Signed-off-by: Mikael Kanstrup <mikael.kanstrup@sonymobile.com>
2016-10-16 12:13:07 +03:00
Mikael Kanstrup
839e4a8a98 hostapd_cli: Add completion for sta command
Signed-off-by: Mikael Kanstrup <mikael.kanstrup@sonymobile.com>
2016-10-16 11:55:02 +03:00
Mikael Kanstrup
bc4b680c22 hostapd_cli: Enable command completion and history for Android
Signed-off-by: Mikael Kanstrup <mikael.kanstrup@sonymobile.com>
2016-10-16 11:55:02 +03:00
Mikael Kanstrup
cf296a23d5 hostapd_cli: Add support for cli history file
Signed-off-by: Mikael Kanstrup <mikael.kanstrup@sonymobile.com>
2016-10-16 11:55:02 +03:00
Mikael Kanstrup
c650f92916 hostapd: Add CONFIG_WPA_CLI_EDIT to defconfig
As hostapd_cli now supports command completion add documentation
of the config option to defconfig. Disabled per default.

Signed-off-by: Mikael Kanstrup <mikael.kanstrup@sonymobile.com>
2016-10-16 11:55:02 +03:00
Joel Cunningham
33111c910b Check for NULL qsort() base pointers
There are a couple of places in wpa_supplicant/hostapd where qsort() can
be called with a NULL base pointer. This results in undefined behavior
according to the C standard and with some standard C libraries (ARM RVCT
2.2) results in a data abort/memory exception. Fix this by skipping such
calls since there is nothing needing to be sorted.

Signed-off-by: Joel Cunningham <joel.cunningham@me.com>
2016-10-15 18:58:27 +03:00
Jouni Malinen
3b5b7aa8fb FILS: Use AEAD cipher to check received EAPOL-Key frames (AP)
This changes 4-way handshake authenticator processing to decrypt the
EAPOL-Key frames using an AEAD cipher (AES-SIV with FILS AKMs) before
processing the Key Data field. This replaces Key MIC validation for the
cases where AEAD cipher is used. This needs to move the EAPOL-Key msg
2/4 RSN element processing to happen only after the PTK has been derived
and validated. That is done for all AKMs to avoid extra complexity with
having to maintain two code paths for this.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-10 21:11:47 +03:00
Jouni Malinen
903ecbe8da FILS: Add hostapd configuration options
This adds CONFIG_FILS=y build configuration option and new key
management options for FILS authentication.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-10 21:11:27 +03:00
Michael Braun
96590564d6 FT: Allow PMK-R0 and PMK-R1 for FT-PSK to be generated locally
Station should be able to connect initially without ft_pmk_cache filled,
so the target AP has the PSK available and thus the same information as
the origin AP. Therefore neither caching nor communication between the
APs with respect to PMK-R0 or PMK-R1 or VLANs is required if the target
AP derives the required PMKs locally.

This patch introduces the generation of the required PMKs locally for
FT-PSK. Additionally, PMK-R0 is not stored (and thus pushed) for FT-PSK.

So for FT-PSK networks, no configuration of inter-AP communication is
needed anymore when using ft_psk_generate_local=1 configuration. The
default behavior (ft_psk_generate_local=0) remains to use the pull/push
protocol.

Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
2016-10-09 11:57:56 +03:00
Jouni Malinen
2462f347bc Change version number to v2.6 for the release
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-10-02 21:51:11 +03:00
Jouni Malinen
61bcc85398 Update ChangeLog files for v2.6
This adds a summary of new changes since the last update.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-09-25 21:12:11 +03:00
Denton Gentry
04059ab844 Passive Client Taxonomy
Implement the signature mechanism described in the paper
"Passive Taxonomy of Wifi Clients using MLME Frame Contents"
published by Denton Gentry and Avery Pennarun.

http://research.google.com/pubs/pub45429.html
https://arxiv.org/abs/1608.01725

This involves:
1. Add a CONFIG_TAXONOMY compile option. Enabling taxonomy incurs
   a memory overhead of up to several kilobytes per associated
   station.
2. If enabled, store the Probe Request and (Re)Associate Request frame in
   struct sta_info.
3. Implement code to extract the ID of each Information Element,
   plus selected fields and bitmasks from certain IEs, into a
   descriptive text string. This is done in a new source file,
   src/ap/taxonomy.c.
4. Implement a "signature qq:rr:ss:tt:uu:vv" command
   in hostapd_cli to retrieve the signature.

Signatures take the form of a text string. For example, a signature
for the Nexus 5X is:
  wifi4|probe:0,1,127,45,191,htcap:01ef,htagg:03,htmcs:0000ffff,vhtcap:338061b2,
  vhtrxmcs:030cfffa,vhttxmcs:030cfffa,extcap:00000a0201000040|assoc:0,1,48,45,
  221(0050f2,2),191,127,htcap:01ef,htagg:03,htmcs:0000ffff,vhtcap:339071b2,
  vhtrxmcs:030cfffa,vhttxmcs:030cfffa,extcap:0000000000000040

Signed-off-by: dgentry@google.com (Denton Gentry)
Signed-off-by: denny@geekhold.com (Denton Gentry)
Signed-off-by: rofrankel@google.com (Richard Frankel)
Signed-off-by: richard@frankel.tv (Richard Frankel)
2016-09-22 00:45:24 +03:00
Lior David
faecb39236 hostapd: Allow FTM functionality to be published
Add configuration options that control publishing of fine timing
measurement (FTM) responder and initiator functionality via bits 70, 71
of Extended Capabilities element. Typically, FTM functionality is
controlled by a location framework outside hostapd. When framework is
activated, it will use hostapd to configure the AP to publish the FTM
functionality. See IEEE P802.11-REVmc/D7.0, 9.4.2.27.

Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
2016-09-05 21:23:07 +03:00
Tamizh chelvam
fc72a48a63 hostapd: Use stations nsts capability in (Re)Association Response frame
Some deployed stations incorrectly consider nsts capability in
(Re)Association Response frame as required capability instead of maximum
capability and if it is greater than station's capability then beamform
will not happen in uplink traffic.

This commit adds support for an optional workaround to use station's
nsts capability in (Re)Association Response frame if the station's nsts
is less than AP by using the use_sta_nsts=1 configuration parameter.
This configuration is introduced in this commit and it is disabled by
default.

Signed-off-by: Tamizh chelvam <c_traja@qti.qualcomm.com>
2016-09-05 21:14:40 +03:00
Jouni Malinen
30e0745bf7 Fix TRACK_STA_LIST before BSS enabled
This hostapd control interface command could hit a NULL pointer
dereference if issued before the BSS was enabled.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-08-19 16:26:48 +03:00
Christopher Wiley
9d5d1c5dd2 Add init fragment for hostapd on Android
This fragment defines how the Android init system should start hostapd
as a standalone service. Previously, hostapd was fork/exec'd from
Android's netd. This left hostapd with some dangling file descriptors
and a process parent minimally interested in acting as init for child
processes.

Signed-off-by: Christopher Wiley <wiley@google.com>
2016-08-18 10:50:59 +03:00
Felix Fietkau
79931efa0d hostapd: Fix parsing the das_client option
The musl implementation of inet_aton() returns an error if there are any
characters left after the IP address. When parsing the das_client, split
the string at the whitespace separator to be able to parse the address
successfully.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-08-13 10:48:28 +03:00
Nick Lowe
42d30e9ea0 Add a require_message_authenticator configuration option
This can be used to mandate the presence of the Message-Authenticator
attribute on CoA/Disconnect-Request packets.

Signed-off-by: Nick Lowe <nick.lowe@lugatech.com>
2016-08-08 00:36:17 +03:00
Jouni Malinen
ac81b3948b cli: Share a common tokenize_cmd() implementation
wpa_cli and hostapd_cli had identical copies of this function.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-08-06 12:46:39 +03:00
Jouni Malinen
980afcce53 cli: Share a common write_cmd() implementation
wpa_cli and hostapd_cli had identical copies of this function.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-08-06 12:41:56 +03:00
Jouni Malinen
fcc84b48b2 cli: Share a common get_cmd_arg_num() implementation
wpa_cli and hostapd_cli had identical copies of this function.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-08-06 12:39:56 +03:00
Jouni Malinen
e55df99ee6 Share a single str_starts() implementation
No need to define this as a static function in multiple files.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-08-06 12:38:21 +03:00
Mikael Kanstrup
23c130e9b7 Use a common license string for hostapd_cli and wpa_cli
Move the license strings for hostapd_cli and wpa_cli to common.

Signed-off-by: Mikael Kanstrup <mikael.kanstrup@sonymobile.com>
2016-08-06 12:34:25 +03:00
Mikael Kanstrup
b90c13d934 hostapd_cli: Completion for interface command
Implement command completion for interface command

Signed-off-by: Mikael Kanstrup <mikael.kanstrup@sonymobile.com>
2016-08-06 12:33:23 +03:00
Mikael Kanstrup
8b73c6aa11 hostapd_cli: Completion for disassociate and deauthenticate
Command completion routine for disassociate and deauthenticate
commands implemented. Tracks AP-STA-CONNECTED/AP-STA-DISCONNECTED
events for easy station MAC address lookup.

Signed-off-by: Mikael Kanstrup <mikael.kanstrup@sonymobile.com>
2016-08-06 12:29:19 +03:00
Mikael Kanstrup
1cef253aab hostapd_cli: Implement event handler
Add an empty event handler in preparation for additional command
completion routines that will need to dynamically build parameters
based on events received.

Signed-off-by: Mikael Kanstrup <mikael.kanstrup@sonymobile.com>
2016-08-06 12:28:54 +03:00
Mikael Kanstrup
977c0796f9 Move parts of wpa_cli to a new common file
In preparation for adding further command completion support
to hostapd_cli move some cli related utility functions out of
wpa_cli into a new common cli file.

Signed-off-by: Mikael Kanstrup <mikael.kanstrup@sonymobile.com>
2016-08-06 12:25:58 +03:00