Commit graph

3606 commits

Author SHA1 Message Date
Jouni Malinen
bfba8deb8b Update internal MAC address on EVENT_INTERFACE_ENABLED events
This allows the MAC address of the interface to be changed when the
interface is set down even if the interface does not get completed
removed and re-added.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-03 13:20:40 +02:00
Jouni Malinen
aef85ba204 nl80211: Ignore interface up event if interface is down
The RTM_NEWLINK even can have IFF_UP flag even if the interface is
down. Do not generate EVENT_INTERFACE_ENABLED event based on such a
message.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-03 13:18:57 +02:00
Johan Hedlund
f98eb880eb Update RSN supplicant MAC address on driver reinitialization
I have a test case where I remove and insert another network adapter
between two connections to AP. The interface get the same interface name
but switches macadresses between the connections. When running WPA2 I
got a failure in EAPOL negotiation and found out that the reason for
this was that the supplicant did not update the MAC address in the
correct place.
2011-12-03 13:02:57 +02:00
Jouni Malinen
3b1c7bfdc5 nl80211: Use binary hexdump for scan IEs instead of text
The IEs are binary data, so there is not much point in trying
to show them as ASCII data in debug prints.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-03 12:47:34 +02:00
Jouni Malinen
34445d12ee Convert hostapd_prepare_rates() to use struct hostapd_iface
Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-03 12:20:17 +02:00
Jouni Malinen
e5693c4775 Merge set_rate_sets() driver_ops into set_ap()
Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-03 12:16:03 +02:00
Jouni Malinen
5f17b3ee9f Remove unused parameters from set_rate_sets()
Only setting of the basic rate set was supported, so remove the
unused parameters.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-03 11:57:13 +02:00
Jouni Malinen
e26cd1a180 hostapd: Show driver event names in debug log
Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-03 11:46:47 +02:00
Jouni Malinen
d03e8d118c nl80211: Merge ap_isolate configuration into nl80211_set_bss()
Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-03 11:43:18 +02:00
Jouni Malinen
e53a0c7406 Fix a typo in a comment
Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-03 11:38:51 +02:00
Szymon Bigos
9337e876ab Fix generated WPS PIN values to use zero-padding
The dynamically generated PINs are supposed to have 8 digits, but
some PIN generatation cases were not zero-padding these properly.
2011-12-02 23:04:39 +02:00
Jouni Malinen
47662f4017 Add example WPS AP mode UI for wpa_supplicant
This script shows some minimal WPS user interface requirements for
mobile AP support with wpa_supplicant.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2011-12-01 22:14:07 +02:00
Jouni Malinen
0bc134683e wpa_supplicant AP: Allows passphrase to be fetched
"wpa_cli status wps" can now be used to fetch the WPA2-Personal
passphrase from AP mode operation with wpa_supplicant to make it
easier to meet WPS requirements for legacy STA support.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2011-12-01 22:12:03 +02:00
Jouni Malinen
c0f83f3104 WPS: Disable WPS(v2) in WPA/TKIP-only configuration
When using wpa_supplicant AP mode, WPS support is enabled by default for
WPA/WPA2-Personal. Change this to enforce the WPS2 rules on not allowing
WPS to be used with WPA/TKIP-only configuration (i.e., at minimum, mixed
mode with WPA/TKIP and WPA2/CCMP has to be used for WPS to be enabled).

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2011-12-01 21:46:19 +02:00
Jouni Malinen
56d24b4ee0 Call wpas_connection_failed() only if actually trying to connect
A disconnection event from the driver may end up getting delivered at a
time when wpa_supplicant is not even trying to connect (e.g., during a
scan that was already started after WPS provisioning step). In such a
case, there is not much point calling wpas_connection_failed() and
skipping this avoids confusing attempts of re-starting scanning while
the previous scan is still in progress.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2011-12-01 18:22:56 +02:00
Jouni Malinen
f7da5a9ef4 Make reconnect-on-disassoc debug prints somewhat more helpful
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2011-12-01 18:22:10 +02:00
Jouni Malinen
a9e02d593d P2P: Clear show_group_started on GO start
The show_group_started variable could be left to 1 based on an earlier
failed attempt to start P2P client operation. This can result in
unexpected P2P-GROUP-STARTED event when a GO is started without group
formation (e.g., re-invoke a persistent group or start an autonomous
GO). Avoid this by explicitly clearing show_group_start when setting up
the GO.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2011-12-01 10:49:26 +02:00
Bharat Chakravarty
8e5f913456 WPS: Allow RF Bands value to be overridden
A new hostapd.conf parameter, wps_rf_bands, can now be used to fix the
RF Bands value in cases where hw_mode is not set or when operating a
dual band dual concurrent AP.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2011-11-30 17:44:43 +02:00
Subrat Dash
910b482d9b WPS: Fix stopping of active WPS operation on dual concurrent AP
When hostapd controls multiple radios, WPS operations are started on
all interfaces. However, when the provisioning run had been completed
successfully, actiove WPS mode was stopped only a single interface. Fix
this to iterate through all interfaces so that this is handled
consistently with the starting of WPS operation.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2011-11-30 16:48:14 +02:00
Jouni Malinen
d6d731b848 WPS ER: Fix segfault in some selected registrar change cases
Commit 628d54639a introduced number
of new WPS related ctrl_iface messages to hostapd. Some of these
were for ER events which do not make any sense to hostapd that
cannot operate as an ER. The WPS_EV_ER_SET_SELECTED_REGISTRAR one
from wps_registrar_sel_registrar_changed_event() was especially
problematic since it can cause wpa_supplicant ER code segfault due
to missing event data.

Revert all the ER specific changes from commit
628d54639a to get rid of the segfault
and undesired extra code in hostapd.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2011-11-30 14:44:23 +02:00
Arik Nemtsov
79b8c60f81 Set ht_capab from based on driver capabilities when in P2P GO mode
Set the HT capabilities of a P2P GO according to the wiphy supported
ones. Mask-in a white-list of HT capabilities that won't cause problems
for non-supporting stations.

Signed-hostap: Arik Nemtsov <arik@wizery.com>
2011-11-29 23:45:07 +02:00
Jouni Malinen
ea5bae4731 Increase min sched_scan interval from 2 to 10 seconds
Trying to run sched_scan round every two seconds by defaults sounds way
too frequent since dualband cards are unlikely to be able to complete
the full scan cycle in two seconds. For now, set the hardcoded value to
10 seconds to make this somewhat more reasonable.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2011-11-29 20:05:58 +02:00
Dmitry Shmidt
216eede830 Android: nl80211: Add Android specific PNO configuration
This is based on the Android driver_cmd changes that are converted to
use the sched_scan/stop_sched_scan driver_ops for the case where the
driver does not support the new nl80211 commands.

Change-Id: Iaedc340f84650af422bd2ea57d2a8b0a9d4a5330
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2011-11-29 15:18:52 +02:00
Dmitry Shmidt
5eb429101a Android: wext: Add sched_scan functions for PNO
(jm: This is based on the Android change that used driver_cmd. The same
implementation is used for the actual driver interface, but the commands
are now accessed through sched_scan/stop_sched_scan driver_ops instead
of driver_cmd)
2011-11-29 15:18:45 +02:00
Dmitry Shmidt
06e356fe14 Android: wext: Add driver state events 2011-11-29 15:18:21 +02:00
Dmitry Shmidt
d70b945d4d Fix pno_start() to initialize SSID list properly
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2011-11-29 12:56:32 +02:00
Jouni Malinen
0b7a25c00f Use normal scan before sched_scan if that can speed up connection
When normal scan can speed up operations, use that for the first three
scan runs before starting the sched_scan to allow user space sleep more.
We do this only if the normal scan has functionality that is suitable
for this or if the sched_scan does not have better support for multiple
SSIDs.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2011-11-28 18:36:36 +02:00
Jouni Malinen
76a5249e52 Add broadcast SSID for sched_scan for scan_ssid=0 networks
Previously, only networks with scan_ssid=1 were included in sched_scan.
This needs to behave similarly to the normal scan where broadcast SSID
is used to find networks that are not scanned for with a specific SSID.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2011-11-28 18:12:38 +02:00
Jouni Malinen
5edddf4175 Use common code for disabled network case in sched_scan
There is no need to implement two copies of the iteration code here.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2011-11-28 18:09:37 +02:00
Jouni Malinen
86b47aaf36 Drop sched_scan filter if not enough match sets supported
Instead of including only a single SSID in the sched_scan request if
the driver does not support match sets, just drop the SSID filter and
configure more SSIDs up to the sched_scan limit.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2011-11-28 17:52:36 +02:00
Jouni Malinen
a8cb5a8897 Make sched_scan debug clearer on timeout use
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2011-11-28 17:52:02 +02:00
Jouni Malinen
6ad9c91100 Stop sched_scan on DISCONNECT command
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2011-11-28 16:35:30 +02:00
Jouni Malinen
b5c6831201 Add preferred network offload (PNO) functionality
"SET pno <1/0>" ctrl_iface command can now be used to start/stop PNO
with sched_scan driver commands. This will request offloading of
scanning to find any of the enabled networks in the configuration.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2011-11-28 16:32:44 +02:00
Jouni Malinen
7c6a266ced Fix sched_scan filter_ssids setting for no filters case
The filter_ssids pointer needs to be set to NULL if no SSID filters
are set to avoid filtering out all scan results.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2011-11-28 15:19:41 +02:00
Jouni Malinen
dbfdb3927c Interworking: Verify that BSS information includes SSID
Better make sure that the SSID is available before dereferencing
the pointer to the SSID element.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-11-27 23:00:37 +02:00
Jouni Malinen
363ab44067 EAP-AKA: Use strdup instead of strlen + malloc + memcpy
While the copy is not used as a null terminated string, this can prevent
some static analyzers from complaining about non-issue.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-11-27 22:45:01 +02:00
Jouni Malinen
0ac6c3f71a EAP-PEAP: Remove unused hdr assignment
Signed-hostap: Jouni Malinen <j@w1.fi>
2011-11-27 22:43:21 +02:00
Jouni Malinen
864a8e3bf6 EAP-PSK: Fix memory leak on error path
Signed-hostap: Jouni Malinen <j@w1.fi>
2011-11-27 22:41:38 +02:00
Jouni Malinen
cdc6e5d084 TLS: Add support for SHA256-based cipher suites from RFC 5246
Signed-hostap: Jouni Malinen <j@w1.fi>
2011-11-27 22:33:54 +02:00
Jouni Malinen
48f24f93a5 wpa_passphrase: Include SHA256 objects to fix some build combinations
Signed-hostap: Jouni Malinen <j@w1.fi>
2011-11-27 22:17:41 +02:00
Jouni Malinen
1622b331f6 TLS: Update file headers to include TLS v1.2 support
Signed-hostap: Jouni Malinen <j@w1.fi>
2011-11-27 22:13:52 +02:00
Jouni Malinen
a838e71ccf Include TLS v1.1 and v1.2 support in library build
Signed-hostap: Jouni Malinen <j@w1.fi>
2011-11-27 22:08:29 +02:00
Jouni Malinen
4b919be289 TLS: Allow TLS v1.2 to be negotiated
Signed-hostap: Jouni Malinen <j@w1.fi>
2011-11-27 22:08:29 +02:00
Jouni Malinen
f0b1c5f7b3 TLS: Add TLS v1.2 style CertificateVerify functionality
Add support for generating and verifying RFC 3447 RSASSA-PKCS1-v1_5
style DigestInfo for TLS v1.2 CertificateVerify. For now, this is
hardcoded to only support SHA256-based digest.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-11-27 22:08:29 +02:00
Jouni Malinen
949b2e1f61 TLS: Add SHA256-based verify_data derivation for TLS v1.2
Signed-hostap: Jouni Malinen <j@w1.fi>
2011-11-27 22:08:28 +02:00
Jouni Malinen
20b4cdcd41 TLS: Maintain SHA256-based hash values for TLS v1.2
Signed-hostap: Jouni Malinen <j@w1.fi>
2011-11-27 21:48:34 +02:00
Jouni Malinen
ca84eed7ad TLS: Add build configuration for TLS v1.2 support
This allows the internal TLS implementation to be built for TLS v1.2
support. In addition to the build option, this changes the TLS PRF
based on the negotiated version number. Though, this commit does not
yet complete support for TLS v1.2.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-11-27 21:45:07 +02:00
Jouni Malinen
bcf03f5209 TLS: Assume explicit IV for TLS v1.1 and newer
This is needed to allow TLS v1.2 to be supported.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-11-27 21:38:25 +02:00
Jouni Malinen
6c67d77fef TLS: Increase maximum MAC key from 20 to 32 octets
This is in prepartion of adding support for SHA256-based operations
with TLS v1.2.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-11-27 21:36:56 +02:00
Jouni Malinen
d0485a6208 TLS: Pass version to tls_prf() in preparation for new PRFs
Signed-hostap: Jouni Malinen <j@w1.fi>
2011-11-27 21:35:11 +02:00