Commit graph

4015 commits

Author SHA1 Message Date
Jouni Malinen
4e0131d351 WPS: Add support for OOB dev password lengths 16..31
Previously, only the maximum length 32 octets for OOB device password
was accepted. Since the specification allows a shorter password to be
used with limited OOB mechanism (e.g., small NFC tag), we should accept
lengths 16..32.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-06-27 21:22:12 +03:00
Jouni Malinen
582143e544 WPS: Fix potential memory leak with NFC password token
The old stored public key hash needs to be freed before replacing
the pointer with the new value.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-06-27 21:22:12 +03:00
Jouni Malinen
7be6dc2e96 WPS: Fix NFC password token building with WPS 2.0
The earlier WPS 2.0 changes did not increase the wpabuf size when
adding a new attribute to the NFC password token. This could result
in aborting the application on wpabuf overflow if NFC out-of-band
mechanism is used with WPS 2.0 enabled.

Signed-hostap: Jouni Malinen <j@w1.fi>
intended-for: hostap-1
2012-06-27 21:21:11 +03:00
Jouni Malinen
99f0032409 Allow autoscan parameters to be changed in SCANNING state
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-06-26 20:11:25 +03:00
Jouni Malinen
c3d1223848 Reinitialize autoscan on explicit reassocciate/reconnect command
This clears the exponential scan interval back to the base value
when a reconnection is requested explicitly.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-06-26 20:05:51 +03:00
Jouni Malinen
d7ded75832 Cancel pending scan request on DISCONNECT command
Previously, a pending scan request could be left running when processing
DISCONNECT command from control interface. This can result in unexpected
scan, so cancel the request to avoid this.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-06-26 19:57:03 +03:00
Jouni Malinen
992189991c Start autoscan for first connection attempt
Use wpa_supplicant_set_state() to initialize state to DISCONNECT so that
autoscan gets initialized properly. This needs a change in
autoscan_init() to avoid extra scan request that would postpone the
first scan request when an interface is added.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-06-26 19:52:46 +03:00
Jouni Malinen
460b36d0c0 Fix autoscan exponential to limit interval in all cases
The first time the limit is exceeded could result in using larger
value - avoid that by limiting the interval also in that case.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-06-26 19:51:06 +03:00
Jouni Malinen
ccea4eb3e8 Fix autoscan exponential to start with the base value
Initial implementation used base^2 as the starting value.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-06-26 19:47:25 +03:00
Jouni Malinen
1aea2ca325 Write autoscan parameter to config file on updates
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-06-26 19:43:05 +03:00
Tomasz Bursztyka
e3659c89d2 Add a simple periodic autoscan module
This module will sets a fixed scanning interval. Thus, the parameter to
this module is following this format: <fixed interval>

Signed-hostap: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2012-06-26 19:28:21 +03:00
Tomasz Bursztyka
c0fba2b38d Add autoscan module named exponential
This module will compute the interval on a base exponential. Thus,
params to this module are following this format: <base>:<limit>

Signed-hostap: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2012-06-26 19:22:56 +03:00
Tomasz Bursztyka
2bdd834257 Add autoscan command into wpa_cli
Signed-hostap: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2012-06-26 19:11:17 +03:00
Tomasz Bursztyka
bc5d330ae0 Add ctrl iface command for autoscan
Signed-hostap: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2012-06-26 19:09:47 +03:00
Tomasz Bursztyka
67892d5c0d D-Bus: Add AutoScan interface method to set/unset autoscan parameters
Signed-hostap: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2012-06-26 19:05:09 +03:00
Tomasz Bursztyka
7c865c6853 Add automatic scanning support
Like bgscan, autoscan is an optional module based feature to automate
scanning but while disconnected or inactive.

Instead of requesting directly a scan, it only sets the scan_interval
and the sched_scan_interval. So, if the driver supports sched_scan,
autoscan will be able to tweak its interval. Otherwise, the tweaked
scan_interval will be used. If scan parameters needs to be tweaked, an
autoscan_params pointer in wpa_s will provide those. So req_scan /
req_sched_scan will not set the scan parameters as they usually do, but
instead will use this pointer.

Modules will not have to request a scan directly, like bgscan does.
Instead, it will need to return the interval it wants after each
notification.

Signed-hostap: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2012-06-26 18:55:41 +03:00
Tomasz Bursztyka
b0786fba71 Add autoscan parameters support in config file
Signed-hostap: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2012-06-26 18:09:57 +03:00
Thomas Pedersen
1b487b8b1e nl80211: Handle CH_SWITCH event
Some drivers may independently decide to switch channels. Handle this by
updating the hostapd and wpa_supplicant AP and GO configuration.

Signed-hostap: Thomas Pedersen <c_tpeder@qca.qualcomm.com>
2012-06-25 14:45:14 +03:00
Jouni Malinen
e7381b8473 Sync with include/linux/nl80211.h from wireless-testing.git
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-06-25 14:34:22 +03:00
Jouni Malinen
c1c023429b Set state to DISCONNECTED on auth/assoc failures
Some of the authentication/association failure paths left wpa_state to
its previous value. This can result in unexpected behavior when
wpa_supplicant tries to find an AP to connect to since the uncleared
state can result the in the selected BSS being ignored if it is same as
the previously used BSS. This could happen, e.g., when wpa_supplicant
SME was used and the AP rejected authentication. Fix this by explicitly
setting state to DISCONNECTED on auth/assoc failures that did not yet do
this.

Signed-hostap: Jouni Malinen <j@w1.fi>
intended-for: hostap-1
2012-06-25 14:23:25 +03:00
Sunil Dutt Undekari
5bda43cdee P2P: Reject p2p_find when in provisioning
A p2p_find during provisioning shall not allow the enrollee to
pick the network, hence disable p2p_find during provisioning.

Signed-hostap: Sunil Dutt Undekari <duttus@codeaurora.org>
2012-06-25 14:05:49 +03:00
Jouni Malinen
296a34f0c1 Remove STA entry from AP when starting TKIP countermeasures
Previously, the STA entry was removed only from the driver and the STA
entry within hostapd was just marked disassociated. However, this left
the WPA authenticator state machine with an entry and the session was
not terminated properly. In addition, the STA entry could have remaining
indefinitely if the STA did not reconnect after TKIP countermeasures.
Fix this by removing the STA entry from hostapd instead of just leaving
it disassociated.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-06-25 13:53:24 +03:00
Yoni Divinsky
9148ae58d0 hostapd: Fix PBC config method of WSC IE in Beacon/Probe Response
In AP which supports WPSv2 with only virtual push button, when PBC is
called, the WSC IE should include Selected Registrar Configuration
Methods attribute with the bit of the physical push button not set.

Signed-hostap: Yoni Divinsky <yoni.divinsky@ti.com>
2012-06-25 12:20:37 +03:00
Ben Greear
f115560c21 eloop/poll: Handle POLLER | POLLHUP in read logic
Without this, we can get into a tight loop because the
code in general doesn't add eloop exception handlers,
so socket reporting the POLLERR would never be read.

With this change, any socket with POLLERR or POLLHUP
asserted will be handled by the read logic.

Signed-hostap: Ben Greear <greearb@candelatech.com>
2012-06-24 13:19:34 +03:00
Jouni Malinen
ef3e60bf22 Describe CONFIG_AP=y and CONFIG_P2P=y in defconfig
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-06-24 01:07:15 +03:00
Jouni Malinen
781d8e0f2b Fix a typo
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-06-24 00:59:06 +03:00
Johannes Berg
cad0f50e02 nl80211: Simplify cbmsg buffer
The control message received from the kernel needs some space, but
there's no need for the strange typing that breaks clang compilation.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2012-06-23 20:37:09 +03:00
Jouni Malinen
ecabb132b9 atheros: Remove unused variables
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-06-23 20:34:29 +03:00
Baruch Siach
e2e984ea06 atheros: Fix build when WPS and IEEE80211R are both disabled
Signed-hostap: Baruch Siach <baruch@tkos.co.il>
2012-06-23 20:33:50 +03:00
Aarthi Thiruvengadam
c66cf68d5c P2P: Fix fallback to GO Negotiation to avoid PD-before-join timeout
The wpas_p2p_pd_before_join_timeout could be left behind if the PD
Request in p2p_connect-auto case does not succeed. This timeout can
result in unexpected operations since it could trigger join operation
while going through GO Negotiation. Fix this by canceling the timeout
when falling back to GO Negotiation.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-06-20 21:38:31 +03:00
Jouni Malinen
182748e4fb Copy Chargeable-User-Identity in PMKSA caching case
Maintain a copy of Chargeable-User-Identity in the PMKSA cache to allow
it to be included in accounting messages even if full authentication was
not completed.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-06-17 19:51:57 +03:00
Jouni Malinen
302fc0a3c7 RADIUS DAS: Support Chargeable-User-Identity with Disconnect-Request
Chargeable-User-Identity can now be used in Disconnect-Request to
identify the station to be disconnected.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-06-17 19:44:46 +03:00
Jouni Malinen
e58b5ffed7 RADIUS: Fix a typo in attribute name in debug messages
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-06-17 19:39:29 +03:00
Jouni Malinen
ff7e4589ea RADIUS DAS: Add Event-Timestamp attribute into ACK/NAK messages
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-06-17 19:35:03 +03:00
Jouni Malinen
8047a95809 RADIUS DAS: Add support for Disconnect-Request
Calling-Station-Id, Acct-Session-Id, and User-Name attributes in a
Disconnect-Request message can now be used to indicate which station is
to be disconnected.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-06-17 19:30:01 +03:00
Jouni Malinen
fc2a924a8c RADIUS DAS: Check Disconnect-Request attributes
Reject Disconnect-Request if it includes unsupported attributes.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-06-17 18:14:43 +03:00
Jouni Malinen
bde7ba6caf RADIUS DAS: Validate Event-Timestamp
DAS will now validate Event-Timestamp value to be within an acceptable
time window (300 seconds by default; can be set using
radius_das_time_window parameter). In addition, Event-Timestamp can be
required in Disconnect-Request and CoA-Request messages with
radius_das_require_event_timestamp=1.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-06-17 17:43:36 +03:00
Masashi Honma
c2d76aa624 P2P: Add p2p_client_list support for FullMAC Persistent GO
Currently, FullMAC Persistent GO can't use p2p_client_list because its
own hapd->p2p_group is NULL at ap_sta_set_authorized(). This patch
changes the processing to use sta->p2p_ie instead of
p2p_group_get_dev_addr() on FullMAC GO.

Signed-hostap: Masashi Honma <masashi.honma@gmail.com>
2012-06-17 11:58:46 +03:00
Baruch Siach
17706d1c76 hostapd: Return error value on configuration check failure
Don't count errors since the number isn't used anyway.

Signed-hostap: Baruch Siach <baruch@tkos.co.il>
2012-06-16 20:30:28 +03:00
Baruch Siach
4929898dab hostapd: Remove redundant variable initialization
The 'errors' variable is initialized later anyway.

Signed-hostap: Baruch Siach <baruch@tkos.co.il>
2012-06-16 20:26:51 +03:00
Jouni Malinen
f33bc03582 P2P: Fix P2P Client Discoverability bit updates
The P2P Client Discoverability bit is reserved in most frames and its
value in the local P2P peer table should only be updated based on P2P
Group Info attribute from a GO. Fix this by avoiding changes to this
dev_capab bit based on other P2P frames. It would be more correct to
track this separately for each group in which the peer is a member, but
since we do not do that for the other group specific information either,
this can do for now.

It should be noted that prior to commit
18485b5469 wpa_supplicant set this bit in
all P2P frames. However, that commit changed this to match the
specification, i.e., the bit is not set in frames which are received
from P2P Device role. As such, this fix is needed to be able to figure
out that a peer supports client discoverability capability after that
commit.

Signed-hostap: Jouni Malinen <j@w1.fi>
intended-for: hostap-1
2012-06-16 20:17:39 +03:00
Masashi Honma
18485b5469 P2P: Fix setting of P2P Client Discoverability bit
In the P2P specification v1.1, the P2P Client Discoverability bit is
described in Table 12 "Device Capability Bitmap definition". The table
says "Within a P2P Group Info attribute and a (Re)association request
frame the P2P Client Discoverability field shall be set to 1 when the
P2P Device supports P2P Client Discoverability, and is set to 0
otherwise. This field shall be reserved and set to 0 in all other frames
or uses.". To match with this, filter out P2P Client Discoverability bit
from frames where its use is reserved.

Signed-hostap: Masashi Honma <masashi.honma@gmail.com>
2012-06-16 19:54:47 +03:00
Jouni Malinen
1cebaabd80 EAP-SIM/AKA server: Allow pseudonym to be used after unknown reauth id
If the peer uses an unknown reauth id, it would still be possible to use
pseudonym instead of permanent id. Allow this by changing the
AT_PERMANENT_ID_REQ to AT_FULLAUTH_ID_REQ in case unknown reauth id is
used in EAP-Response/Identity.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-06-15 18:49:54 +03:00
Jithu Jance
ef35f5a0fd P2P: Add driver op for requesting GO/AP channel switch
Signed-hostap: Jithu Jance <jithu@broadcom.com>
2012-06-10 20:54:31 +03:00
Jithu Jance
b9cfc09a81 P2P: Add preference setting for concurrent use cases
Add an additional parameter to prioritize either sta or p2p connection
to resolve conflicts arising during single channel concurrency.

Signed-hostap: Jithu Jance <jithu@broadcom.com>
2012-06-10 20:53:09 +03:00
Jouni Malinen
a0227929dc P2P: Do not use reassociation after getting disassociated
This avoids issues with some APs rejecting a reassociation if the
station is not currently associated as reported by Yossi Wortzel.
The change is based on a patch from Arik Nemtsov.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-06-10 19:51:36 +03:00
Jouni Malinen
198f82a1e3 P2P: Ignore unexpected GO Neg Resp is we have sent Resp
There is a race condition in GO Negotiation Request frame sending and
processing that may end up with both devices sending GO Negotiation
Response. This response frame was previously accepted even if a response
had already been sent. This could result in two GO Negotiation Confirm
frames being exchanged and consequently, with two separate GO
Negotiations completing concurrently. These negotiations could result in
getting mismatching parameters (e.g., both device could believe it was
the GO).

Fix this by ignoring GO Negotiation Response from the peer if twe have
already sent a GO Negotiation Response frame and we have the higher P2P
Device Address. This is similar to the rule used to determine whether to
reply to GO Negotiation Request frame when Request was already sent,
i.e., the same direction of GO Negotiation is maintained here to enforce
that only the negotiation initiated by the device with smaller P2P
Device Address is completed.

Signed-hostap: Jouni Malinen <j@w1.fi>
intended-for: hostap-1
2012-06-09 18:31:24 +03:00
Neeraj Kumar Garg
a1d2ab329e P2P: Address race condition with GO Negotiation Request TX status
If both peers initiate GO Negotiation at about the same time, it is
possible for the GO Negotiation Request frame from the peer to be
received between the local attempt to send the GO Negotiation Request
and TX status event for that. This could result in both devices sending
GO Negotiation Response frames even though one of them should have
skipped this based which device uses a higher MAC address.

Resolve this race by incrementing go_neg_req_sent when p2p_send_action()
returns success instead of doing this from the TX status callback. If
the frame is not acknowledged, go_neg_req_sent is cleared in TX status
handler.

Signed-off-by: Neeraj Garg <neerajkg@broadcom.com>
2012-06-09 18:03:47 +03:00
Antonio Quartulli
dada954ad7 sta_info: Remove duplicated function declaration
In sta_info.h, ap_free_sta() was declared twice.

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-06-09 12:54:00 +03:00
Jouni Malinen
e22ba3e390 LibTomMath: Use 64-bit mode for mp_digit
For 64-bit x86 builds, enable 64-bit mode to optimize bignum operations
with the internal LibTomMath version.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-06-09 11:53:30 +03:00