Commit graph

48 commits

Author SHA1 Message Date
Jouni Malinen
158211b2db WNM: Use country code, if available, to help in channel mapping
The country code from the current AP needs to be used in
ieee80211_chan_to_freq() to support cases where non-global operating
class table is used.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-24 10:57:38 +02:00
Jouni Malinen
fecc09edc3 WNM: Use a clearer validation step for key_len_total
The previous one based on pointer arithmetic was apparently too much for
some static analyzers (CID 68130).

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-23 18:04:02 +02:00
Jouni Malinen
f5f3728a81 WNM: Print debug message if Action frame sending fails
This makes wpa_drv_send_action() return value checking more consistent
(CID 75390).

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-23 16:13:50 +02:00
Jouni Malinen
75d65857d5 WNM: Use recent scan results on BSS transition request
If the last scans are recent (for now, less than ten seconds old), use
them instead of triggering a new scan when a BSS Transition Management
Request frame is received. As a fallback, allow a new scan to be
triggered if no matches were found.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-22 20:17:47 +02:00
Jouni Malinen
e1117c1c01 WNM: Optimize BSS transition management scans
When the list of preferred transition candidates is received, use the
identified channels to optimize the following scan so that no time is
wasted on other channels.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-22 20:17:47 +02:00
Jouni Malinen
d0b9ab69f6 WNM: Move transition candidate list processing to normal scan
This makes it easier to optimize transition request processing.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-22 18:40:03 +02:00
Jouni Malinen
279b5486a6 WNM: Fix TM candidate freeing if multiple requests are processed
The previously cached candidate list needs to be free properly through a
call to wnm_deallocate_memory() to ensure all subelements gets freed.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-22 18:40:03 +02:00
Jouni Malinen
027454d2e9 WNM: Allow BSS transition request in same ESS even if RSSI is worse
This allows an AP to steer us to another BSS within the ESS even if that
results in reduced signal strength as long as the signal strength with
the target BSS is expected to provide some connectivity.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-22 18:06:37 +02:00
Jouni Malinen
6900b6d96f WNM: Mark wnm_scan_response() static
This function is not used outside wnm_sta.c.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-22 18:06:37 +02:00
Jouni Malinen
ff2c5758bb WNM: Order BSS transmission candidate entries based on preference
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-22 18:06:37 +02:00
Jouni Malinen
093226783d WNM: Simplify how candidate subelements are stored
There is no need to use a separately allocated data structures for this.
A bitfield indicating which information is present and variables within
struct neighbor_report are simpler to use and more efficient.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-22 18:06:37 +02:00
Jouni Malinen
8c9af762f3 WNM: Calculate valid-until time for transition candidate list
This is of more use than the raw validity interval (number of beacon
intervals) that was recorded previously.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-22 18:06:27 +02:00
Jouni Malinen
4c381f0d1c WNM: Convert BSSID Info into a u32
This is more convenient to use than u8 array.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-22 17:03:15 +02:00
Jouni Malinen
8040dc53c2 WNM: Debug print WNM BSS Transition Candidate List
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-22 16:34:34 +02:00
Jouni Malinen
2703fb4ad9 WNM: Use cleaner way of generating pointer to a field (CID 68100)
The Action code field is in a fixed location, so the IEEE80211_HDRLEN
can be used here to clean up bounds checking to avoid false reports from
static analyzer.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-13 00:27:15 +03:00
Jouni Malinen
897a5ccee8 WNM: Remove unnecessary present flag
The structures are all allocated, so the pointer can be compared to NULL
to determine whether the subelement was present.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-04-08 01:34:17 +03:00
Jouni Malinen
f6ce70dc0d WNM: Fix neighbor report subelement formats
Number of of subelements were using incorrect format definition.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-04-08 01:32:28 +03:00
Jouni Malinen
e9cb7b9275 WNM: Fix neighbor report subelement parser to not leak memory
If a subelement is unexpectedly included multiple times, the parser must
not re-allocate memory for the entry without first freeing the old
allocation.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-04-08 01:20:24 +03:00
Jouni Malinen
1aa6f953bb WNM: Fix neighbor report subelement parser
Only the Neighbor Report element should be included here, so verify that
the element id matches. In addition, verify that each subelement has
valid length before using the data.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-04-08 01:01:55 +03:00
Jouni Malinen
ec331d09a2 WNM: Fix deinit path to clean neighbor report count
wnm_deallocate_memory() left wnm_num_neighbor_report set while freeing
the allocated buffer of neighbor reports. If this function was called
twice in a row without having went through new neighbor report parsing,
invalid pointers could have been freed resulted in segfault.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-04-07 13:40:45 +03:00
Jouni Malinen
9a147ba18d WNM: Fix regression in Sleep Mode exit key data parsing
Commit dbfb8e82ff changed the Action frame
RX payload pointer design to point to a different field. WNM Sleep Mode
Response handler updated one of the uses to accommodate this change, but
that commit missed another use for key data length. This resulted in GTK
and IGTK being ignored in many cases when waking up from WNM Sleep Mode
with PMF enabled.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-05 20:42:13 +03:00
Jouni Malinen
67adcd266c WNM: Check wpa_s->current_bss more consistently
The scan result comparison routine would not make much sense without
current BSS level known, so return from the function without going
through the iteration that could have dereferenced the pointer if
wpa_s->current_bss == NULL.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-02 17:15:12 +02:00
Jouni Malinen
7ef6947993 HS 2.0R2: Add STA support for Deauthentication Request notification
If requested, disable the network based on the HS 2.0 deauthentication
request.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-26 01:24:23 +02:00
Jouni Malinen
95a3ea9426 HS 2.0R2: Add WNM-Notification Request for Subscription Remediation
Subscription remediation notification WNM-Notification Request is now
shown in the following way in wpa_supplicant control interface:
<3>HS20-SUBSCRIPTION-REMEDIATION http://example.com/foo/

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-26 01:24:23 +02:00
Jouni Malinen
dbfb8e82ff Remove unnecessary EVENT_RX_ACTION
This driver event was used separately for some Action frames, but all
the driver wrappers converted to this from information that would have
been enough to indicate an EVENT_RX_MGMT event. In addition, the
received event was then converted back to a full IEEE 802.11 management
frame for processing in most cases. This is unnecessary complexity, so
get rid of the extra path and use EVENT_RX_MGMT for Action frames as
well as other management frame subtypes.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-29 17:18:17 +02:00
Jouni Malinen
2cd0f6a429 WNM: Add Target BSSID into BSS Transition Management Response
P802.11-REVmc clarifies that the Target BSSID field is always present
hen status code is zero, so match that requirement.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-27 18:11:07 +02:00
Jouni Malinen
a8a6a35fd6 WNM: Use nonzero dialog token in BSS Transition Management Query
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-27 18:11:07 +02:00
Sudha Daram
3c1060ff8f WNM: Add debug logs to get the RSSI from the scan results
This commit adds few more debug prints to log the RSSI information from
the scanned BSSIDs and the current connected BSSID when comparing
neighbor results during WNM Transition Management Request processing.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-12-26 22:26:05 +02:00
Jouni Malinen
ae8535b6e1 WNM: Make ESS Disassoc Imminent event more convenient to use
Define a proper event prefix and include additional information to allow
ESS Dissassociation Imminent event to be used in a wpa_cli action
script.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-23 16:51:03 +03:00
Jouni Malinen
6df634faf9 WNM: Do not reject ESS Disassoc Imminent
This indication is not expected to include candidates, so do not reject
it based on that.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-23 16:50:55 +03:00
Jouni Malinen
7b53acd395 WNM: Use defines for BSS Trans Mgmt field values
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-23 16:50:39 +03:00
Vinayak Kamath
65bcd0a92d WNM: Add sending of BSS Transition Management Query
The new control interface command can be used to send a
BSS Transition Management Query frame to the current AP.

Signed-hostap: Vinayak Kamath <vkamat@codeaurora.org>
2013-05-16 17:50:31 +03:00
Vinayak Kamath
e27d20bb68 WNM: Add neighbor report processing for BSS Transition Management
Process the neighbor report received in BSS Management Request frames.

Signed-hostap: Vinayak Kamath <vkamat@codeaurora.org>
2013-05-16 17:48:59 +03:00
Jouni Malinen
2049a875bc WNM: Additional BSS Transition Management capability
Add some more functionality for BSS Transition Management:
- advertise support for BSS Transition Management in extended
  capabilities element
- add hostapd.conf parameter bss_transition=1 for enabling support
  for BSS Transition Management
- add "hostapd_cli disassoc_imminent <STA> <num TBTTs>" for sending
  disassociation imminent notifications for testing purposes
- wpa_supplicant: trigger a new scan to find another BSS if the
  current AP indicates disassociation imminent (TODO: the old AP needs
  to be marked to use lower priority to avoid re-selecting it)

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-12-22 20:27:30 +02:00
Jouni Malinen
27c77751f7 WNM: Fix BSS Transition Management Request processing
The WNM-Sleep Mode handler took over WNM Action frame processing without
addressing the previously implemented WNM handler. Fix this by moving
the BSs Transition Management processing into wnm_sta.c to share a
single handler function for WNM Action frames.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-12-22 12:02:15 +02:00
Jouni Malinen
14df897c7a WNM: Fix memory leak on error path
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-12-16 19:31:25 +02:00
Jouni Malinen
ad3872a372 WNM: Use CONFIG_WNM more consistently
Replace CONFIG_IEEE80211V with CONFIG_WNM to get more consistent build
options for WNM-Sleep Mode operations. Previously it was possible to
define CONFIG_IEEE80211V without CONFIG_WNM which would break the build.
In addition, IEEE 802.11v has been merged into IEEE Std 802.11-2012 and
WNM is a better term to use for this new functionality anyway.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-12-16 18:22:54 +02:00
Jouni Malinen
74b4a3606d WNM: Split WNM-Sleep Mode Response processing into separate functions
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-12-16 13:05:19 +02:00
Jouni Malinen
df80a0ccff WNM: Use defined macros for WNM-Sleep Mode Action Type values
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-12-16 12:57:38 +02:00
Jouni Malinen
0a47a6a747 WNM: Remove unnecessary extra indentation level
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-12-16 12:51:02 +02:00
Jouni Malinen
68db9ab047 WNM: Fix GTK/IGTK parsing for WNM-Sleep Mode Response frame
These fields do not use AES keywrap. Instead, they are protected with
management frame protection (and not included if PMF is disabled).

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-12-16 12:48:34 +02:00
Jouni Malinen
62f6fbb480 WNM: Accept GTK update version of WNM-Sleep Response status
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-12-16 12:33:55 +02:00
Jouni Malinen
e0c54a159b WNM: Use Dialog Token value 1 in WNM-Sleep Mode Request
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-12-16 12:32:53 +02:00
Jouni Malinen
cd0ef65784 WNM: Add option for passing TFS request from external programs
The optional tfs_req=<hex dump> parameter can be added for the wnm_sleep
command to specify the TFS request element to use in the WNM-Sleep Mode
Request frame.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-12-16 12:31:16 +02:00
Jouni Malinen
61c54976f5 WNM: Remove unnecessary path component from includes
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-12-16 12:29:44 +02:00
Jouni Malinen
e9199e3149 WNM: Add ctrl_iface command for sending WNM-Sleep Mode Request
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-12-16 12:29:10 +02:00
Jouni Malinen
9af431035f WNM: Remove unused variable
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-12-16 12:27:38 +02:00
Xi Chen
75cad1a0d4 WNM: Add WNM-Sleep Mode for station mode
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-01 13:21:27 +03:00