Commit graph

7305 commits

Author SHA1 Message Date
Jouni Malinen
0cd9846c63 nl80211: Print debug info on STA flag changes
This makes it easier to follow how kernel STA flags are managed.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-09-11 11:25:04 +03:00
Jouni Malinen
17e2091279 P2P: Fix radio work issue with wait-for-peer GO Negotiation
If a TX status event and RX event for a GO Negotiation frame gets
delayed long enough to miss the initial wait, it was possible for
reception of a GO Negotiation Response frame with status 1 to try to
initiate a new p2p-listen work item to wait for the peer to become ready
while a previous p2p-listen was already in progress due to that earlier
timeout while waiting for peer. This would result in the new
start_listen request getting rejected ("P2P: Reject start_listen since
p2p_listen_work already exists") and the negotiation not proceeding.

Work around this by using P2P_WAIT_PEER_CONNECT state instead of
P2P_WAIT_PEER_IDLE if P2P_CONNECT_LISTEN state has already been entered
when processing this special GO Negotiation Response status=1 case. This
can avoid double-scheduling of p2p-listen and as such, completion of the
GO negotiation even if the driver event or peer response are not
received in time (the response is supposed to be there within 100 ms per
spec, but there are number of deployed devices that do not really meet
this requirement).

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-09-09 18:00:42 +03:00
Jouni Malinen
76db5b6b12 Work around broken AP PMKSA caching implementation
An interoperability issue with a deployed AP has been identified where
the connection fails due to that AP failing to operate correctly if
PMKID is included in the Association Request frame. To work around this,
allow EAPOL-Start packet to be transmitted on startWhen reaching 0 even
when trying to use PMKSA caching. In practice, this allows fallback to
full EAP authentication if the AP/Authenticator takes more than 1-2
seconds to initiate 4-way handshake for PMKSA caching or full EAP
authentication if there was no PMKSA cache match.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-09-08 17:18:01 +03:00
Jouni Malinen
b08d5fa793 WPS: Set EAPOL workarounds dynamically based on association
Previously, the shorter startWhen value was used based on build
parameters (i.e., if WPS was enabled). This is not really ideal and the
knowledge of WPS use can be provided to the EAPOL state machine to allow
this (and similar WPS workarounds) to be done only when the association
is for the purpose of WPS.

Reduce the default startWhen value from 3 to 2 seconds for non-WPS case
since WPS builds have likely received most testing for the past years
with the 1 second value and there is no strong justification for forcing
the longer 3 second wait should a frame be lost or something else
require the EAPOL-Start to initiate operation after a connection.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-09-08 17:16:04 +03:00
Jouni Malinen
8511a0f67b WPS: Extend internal entropy pool help for key/snonce derivation
The internal entropy pool was previously used to prevent 4-way handshake
in AP mode from completing before sufficient entropy was available to
allow secure keys to be generated. This commit extends that workaround
for boards that do not provide secure OS level PRNG (e.g., /dev/urandom
does not get enough entropy) for the most critical WPS operations by
rejecting AP-as-enrollee case (use of AP PIN to learn/modify AP
configuration) and new PSK/passphrase generation. This does not have any
effect on devices that have an appropriately working OS level PRNG
(e.g., /dev/random and /dev/urandom on Linux).

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-09-08 12:54:18 +03:00
Dmitry Shmidt
abc05534aa Remove WPA_EVENT_SCAN_STARTED message from MSG_INFO log
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2014-09-07 19:54:39 +03:00
Eduardo Abinader
c45dabb855 P2P: Deauth p2p client just after dbus notify
Currently to signal PropertiesChanged upon group client
removal (group property), wpa_supplicant dbus uses wpa_s
members like go_dev_addr and current_ssid, for instance.
Thus, deferring p2p client deauth to after dbus notify,
but keeping the same order as before, solves the issue,
as wpa_s is not yet completely deinitialized.

Signed-off-by: Eduardo Abinader <eduardo.abinader@openbossa.org>
2014-09-07 19:50:32 +03:00
Eduardo Abinader
3ee18569f5 nl80211: Register eloop after hs20 action frame
Even when hs20 action frame is unable to be registered,
for whatever reason, it should be possible to register
event handle for received driver messages. This patch also
avoids a segmentation fault, when p2p and hs20 were enabled
and GO NEG was unable to create p2p iface, the destroy eloop
was crashing by reading an invalid handle.

Signed-off-by: Eduardo Abinader <eduardo.abinader@openbossa.org>
2014-09-07 19:22:49 +03:00
Dan Williams
3bd3257a0a dbus: add BSS Age property to indicate last-seen time
"Age" is the age in seconds since the BSS was last seen, and is
emitted as a PropertyChanged signal whenever the BSS is updated
from a scan result. It also returns the correct age when queried
directly.

This property can be used to resolve issues where, if no other
properties of the BSS changed from scan results (for example,
if the BSS always had 100% signal) no D-Bus signals would be
emitted to indicate that the BSS had just been seen in the scan.

Signed-hostap: Dan Williams <dcbw@redhat.com>
2014-09-07 19:18:45 +03:00
Masashi Honma
5c61d214ad openssl: Fix memory leak in openssl ec deinit
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2014-09-07 19:14:18 +03:00
Jouni Malinen
10e7948f76 Fix hostapd GET_CONFIG wpa_pairwise_cipher value
Copy-paste error ended up getting rsn_pairwise_cipher value for both
rsn_pairwise_cipher and wpa_pairwise_cipher (CID 72693).

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-09-07 18:40:05 +03:00
Jouni Malinen
3a413e0ed8 RADIUS client: Check getsockname() return value
In theory, this function could fail, so check the return value before
printing out the RADIUS local address debug message (CID 72700).

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-09-07 18:35:46 +03:00
Jouni Malinen
9c196f7703 HTTP: Fix OCSP status check
Due to a missing curly brackets, the OCSP status checking was not
working in the expected way. Instead of allowing optional-OCSP
configuration to accept connection when OCSP response was ready, all
such cases were marked as hard failures. In addition, the debug prints
were not necessarily accurate for the mandatory-OCSP-but-no-response
case (CID 72694, CID 72704).

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-09-07 18:30:58 +03:00
Jouni Malinen
cb5ef952c8 SME: Verify that os_get_random() succeeds for SA Query
Be more consistent on checking os_get_random() return value (CID 72706).

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-09-07 18:27:42 +03:00
Jouni Malinen
c9cd78e5a1 RADIUS server: Fix IPv6 radiusAuthClientAddress mask
Incorrect buffer was used when writing the IPv6 mask for RADIUS server
MIB information (CID 72707).

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-09-07 18:25:04 +03:00
Jouni Malinen
5e62cfdf75 P2P: Verify that os_get_random() succeeds
Be more consistent with os_get_random() use (CID 72710).

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-09-07 18:05:53 +03:00
Jouni Malinen
6473e80ea4 EAP-PAX server: Add explicit CID length limit
Instead of using implicit limit based on 16-bit unsigned integer having
a maximum value of 65535, limit the maximum length of a CID explicitly
to 1500 bytes. This will hopefully help in reducing false warnings from
static analyzers (CID 72712).

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-09-07 17:10:33 +03:00
Jouni Malinen
6a6566c7af Remove unnecessarily shadowed local variable
The same local X509 *cert variable can be used for both the X509_dup()
calls.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-09-07 16:40:33 +03:00
Ashok Kumar Ponnaiah
eb2223e0ec wlantest: Add decryption of CCMP-256, GCMP, GCMP-256
This extends wlantest support for decrypting the new cipher suites.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-09-03 15:41:35 +03:00
Ashok Kumar Ponnaiah
3a3cb8ee81 wlantest: Indicate if a TKIP/CCMP replay has Retry=1
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-09-03 15:41:35 +03:00
Ashok Kumar Ponnaiah
fa6fff1893 wlantest: Recognize CCMP-256, GCMP, and GCMP-256 ciphers
This adds support for displaying whether a BSS or STA is using one of
the newer cipher suites.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-09-03 15:41:35 +03:00
Jouni Malinen
df756b374e hostapd: Remove unused variable assignment
The local bss variable is used only within the while loop, so no need to
assign or even make it visible outside the loop.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-09-03 15:37:58 +03:00
Sunil Dutt
e47abdb9db TDLS: Decline Setup Request with status code 37 if BSSID does not match
TDLS Setup Request frame has to be rejected with status code 37 ("The
request has been declined"), if the BSSID in the received Link
Identifier does not match the current BSSID per IEEE Std 802.11-2012,
10.22.4 ('TDLS direct-link establishment') step (b). The previously used
status code 7 ('Not in same BSS') is described to used only when
processing TPK Handshake Message 2 in TDLS Setup Response frame.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-09-02 18:06:58 +03:00
Mahesh A Saptasagar
ce2002acca TDLS: Add RSN and Timeout interval IEs in TDLS Discovery Response frame
If RSN is enabled, add RSN and Timeout interval elements in TDLS
Discovery Response frames.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-09-02 17:11:42 +03:00
Edhar, Mahesh Kumar
1c2aa04c96 P2P: Do not add P2P IEs on P2P disabled interface
While building Association Request frame IEs we should consider adding
P2P IEs only on interface where P2P functionality is enabled. Consider
per interface p2p_disabled parameter before adding P2P IEs to complete
the checks for this.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-09-02 11:04:26 +03:00
Jouni Malinen
d885a0ba7c tests: P2P GO netdev in a bridge
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-09-01 16:27:27 +03:00
Jouni Malinen
f2e9083549 nl80211: Add more RTM_NEWLINK/DELLINK debug messages
This makes it easier to figure out what operations are generating each
RTM_DELLINK message.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-09-01 16:18:01 +03:00
Jouni Malinen
728ff2f469 nl80211: Fix RTM_DELLINK processing for bridge events
When a netdev is removed from a bridge, RTM_DELLINK message is received
with ifname (IFLA_IFNAME) pointing to the main netdev event though that
netdev is not deleted. This was causing issues with P2P GO interface
getting disabled when the netdev was removed from a bridge. Fix this by
filtering RTM_DELLINK events that are related to the bridge when
indicating interface status changes.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-09-01 16:14:07 +03:00
Jouni Malinen
a0fd2ae643 tests: WPS mixed-WPA/WPA2 credential merging
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-08-29 20:25:18 +03:00
Hu Wang
e5a4b85b2f WPS: Merge mixed-WPA/WPA2 credentials if received in same session
Some deployed APs send two credentials when in mixed-WPA/WPA2
configuration; one for the WPA-Personal/TKIP and the other for
WPA2-Personal/CCMP. Previously, this would result in two network blocks
getting added for the single AP. This can be somewhat confusing and
unnecessary, so merge such credentials into a single one that allows
both WPA and WPA2 to be used.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-08-29 20:25:18 +03:00
Srinivas Girigowda
db9418bb1b Add printf NULL checks to silence static analyzer
Add NULL checks to take care of issues reported by static analyzer tool
on potentially using NULL with printf format %s (which has undefined
behavior even though many compilers end up printing "(null)").

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-08-28 18:25:32 +03:00
Jouni Malinen
d6df0d7e62 tests: Verify that sec_dev_type gets reported for P2P peer
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-08-27 16:22:53 +03:00
Chandrasekaran, Manishekar
4e5367516b P2P: Overwrite pending interface only after verifying BSS entry
Previously, the P2P Interface Address of the peer gets updated in the
peer table every time based on the scan results.

For example, in a two port concurrency scenario, where the peer device
has two interfaces with unique P2P Interface Addresses and with same P2P
Device Address, based on the Probe Response/Beacon frames from these two
interfaces, their peer table gets updated, but each of these updates
happens in the peer table only based on the P2P Device Address. So, the
same peer's P2P Interface address is updated every time and hence, at
any instant, only one P2P Device Address to P2P Interface Address
mapping entry exist in the peer table for the peer which has two
interfaces.

When we try to join a group operated by the peer, lookup happens in the
peer table and when an interface entry is not available, the pending
interface address gets overwritten with the P2P Device Address and hence
the P2P connection can fail. Since the BSS table is the one that is
up-to-date, this fix will ensure that the interface overwriting will
happen only when there is no BSS entry for the pending P2P Interface
Address as well.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-08-26 18:58:54 +03:00
Jouni Malinen
4b15c3f256 tests: P2P GO channel preference and regulatory rule mismatch
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-08-26 17:57:26 +03:00
Jouni Malinen
04a258e7c5 hostapd: Check that EVENT_ASSOC data is present before using it
While hostapd should not really receive the EVENT_ASSOC message for
IBSS, driver_nl80211.c could potentially generate that if something
external forces the interface into IBSS mode and the IBSS case does not
provide the struct assoc_info data. Avoid the potential NULL pointer
dereference by explicitly verifying for the event data to be present.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-08-26 17:23:02 +03:00
Bojan Prtvar
1cc0d6a0eb wpa_supplicant: Use freq_list scan filtar in sched_scan
Global freq_list scan filtar was taken into account only by
req_scan and not by req_sched_scan. We want to allow the user
to limit the channels that wpa_supplicant will scan in req_sched_scan
requests as well.

Signed-off-by: Bojan Prtvar <bojan.prtvar@rt-rk.com>
2014-08-12 16:44:04 +03:00
Eduardo Abinader
4aa9c156e5 dbus: Close dbus dict just after appending data
Before fixing this issue, calling wpas_dbus_getter_p2p_device_config
was causing early termination of dbus connection, due to writing
values to an already closed dict.

Signed-off-by: Eduardo Abinader <eduardo.abinader@openbossa.org>
2014-08-10 11:29:49 +03:00
Avinash Patil
b8d87ed296 nl80211: Disable Probe Request reporting for static AP during deinit
Disable Probe Request reporting for statically created AP interfaces
during de-initialization. We will enable it again while starting AP
operations.

Signed-off-by: Avinash Patil <avinashapatil@gmail.com>
2014-08-10 11:22:30 +03:00
Avinash Patil
bf144cf649 nl80211: Do not change iftype for static AP interface
Some devices have limitations which do not allow changing virtual
interface mode from AP to station or vice versa. To work around this,
check if such AP interface is not dynamic. If such an interface is
enumarated, just set ifmode to AP and avoid setting nlmode to default
station mode on deinit.

Signed-off-by: Avinash Patil <avinashapatil@gmail.com>
2014-08-10 11:19:11 +03:00
Jean-Marie Lemetayer
61157afb1c wext: Add signal_poll callback
Add a basic implementation of a signal_poll callback for wext drivers.

Signed-off-by: Jean-Marie Lemetayer <jeanmarie.lemetayer@gmail.com>
2014-08-10 11:07:05 +03:00
Eduardo Abinader
af65bc36bb P2P: Use ssid instead of wpa_ssid to find GO iface
In order to find a GO interface, there has to be a
comparison among two SSIDs, instead of a wpa_ssid and
a ssid.

Signed-off-by: Eduardo Abinader <eduardo.abinader@openbossa.org>
2014-08-10 11:04:08 +03:00
Jouni Malinen
6c460eaf7e Add RSN cipher/AKM suite attributes into RADIUS messages
This adds hostapd support for the new WLAN-Pairwise-Cipher,
WLAN-Group-Cipher, WLAN-AKM-Suite, and WLAN-Group-Mgmt-Pairwise-Cipher
attributes defined in RFC 7268. These attributes are added to RADIUS
messages when the station negotiates use of WPA/RSN.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-07-31 19:55:29 +03:00
Jouni Malinen
cdffd72173 Add WLAN-HESSID into RADIUS messages
This adds hostapd support for the new WLAN-HESSID attribute defined in
RFC 7268. This attribute contains the HESSID and it is added whenever
Interworking is enabled and HESSID is configured.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-07-31 19:55:29 +03:00
Jouni Malinen
69002fb0a8 Add Mobility-Domain-Id into RADIUS messages
This adds hostapd support for the new Mobility-Domain-Id attribute
defined in RFC 7268. This attribute contains the mobility domain id and
it is added whenever the station negotiates use of FT.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-07-31 19:55:29 +03:00
Tomasz Bursztyka
4a0693a4d5 dbus: Declare and implement GroupFinished as for GroupStarted
First for better concistancy but also to tell about the group_object
that is getting removed, thus the client will know about it and will be
able to act accordingly.

Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2014-07-31 17:20:56 +03:00
Jithu Jance
2fa980f0f1 P2P: Cancel pending action TX radio work on p2p_cancel
When p2p_cancel is invoked while the GO Negotiation Action TX was
pending, the p2p_send_action_work was not getting cleared.

Signed-off-by: Jithu Jance <jithu@broadcom.com>
2014-07-31 17:13:46 +03:00
Philippe Nunes
8b627b7c47 Fix writing of the wowlan_triggers parameter
The parameter wowlan_triggers is a global string and is not recognised
if it is embraced with double-quotes.

Signed-off-by: Philippe Nunes <philippe.nunes@linux.intel.com>
2014-07-31 17:03:33 +03:00
Elliott Hughes
ec5357323c Android: Always #include <sys/...>, not <linux/...>
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2014-07-31 16:59:23 +03:00
Jouni Malinen
e8c08c9a36 EAP-FAST server: Fix potential read-after-buffer (by one byte)
The special PAC_OPAQUE_TYPE_PAD case did not skip incrementing of the
pos pointer and could result in one octet read-after-buffer when parsing
the PAC-Opaque data.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-07-26 21:14:05 +03:00
Jouni Malinen
8b65fefeed Interworking: Remove unnecessary placeholder for PAME-BI
The PAME-BI bit in the Advertisement Protocol element is reserved for
non-AP STA, so this function will never set that bit to one and as such,
there is not much point in maintaining the placeholder dead code for
this either. (CID 68107)

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-07-26 20:28:03 +03:00