Commit graph

3389 commits

Author SHA1 Message Date
Amr BEN ABDESSALEM
0c9fb14ec4 P2P: Add Operating class 125 for P2P supported channels
Add operating class 125 (channels 149..169) to the list of P2P supported
channels. This allows the 5 GHz channels 161 and 169 to be used for P2P
GO when those channels are allowed for AP mode in the current regulatory
domain.

Signed-off-by: Amr BEN ABDESSALEM <amrx.ben.abdessalem@intel.com>
2015-06-12 20:39:49 +03:00
Ilan Peer
57e832de37 GAS: Remove all radio works before calling gas_query_deinit()
Remove all gas-query radio works before calling gas_query_deinit()
as gas_query_deinit() flow frees the query context, which might
be later be accessed from the radio work callback (and result
with unexpected behavior, e.g., segmentation fault).

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-06-11 02:57:34 +03:00
Jouni Malinen
661888be39 P2P: Fix persistent group profile on manual disabled=2 change
ssid->p2p_persistent_group was left to its old value when changing a
network profile to/from P2P persistent group type (disabled=2). This
could result in unexpected behavior when using an incomplete persistent
group profile. This was mainly visible through D-Bus network profile
handling where a persistent group would not be unregistered insome
cases.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-06-11 00:02:05 +03:00
Avichal Agarwal
1a2f7ca1b8 D-Bus: Add WPS pbc-overlap Event
This sends an Event D-Bus signal with name "pbc-overlap" for
WPS-EVENT-OVERLAP.

Signed-off-by: Avichal Agarwal <avichal.a@samsung.com>
2015-06-10 20:51:30 +03:00
Amit Khatri
4f369652da P2P: Add ModelNumber and SerialNumber info into D-Bus peer interface
Signed-off-by: Amit Khatri <amit.khatri@samsung.com>
Signed-off-by: Rahul Jain <rahul.jain@samsung.com>
2015-06-10 19:11:12 +03:00
Amit Khatri
2899cba622 P2P: Add ModelName info into D-Bus peer interface
Signed-off-by: Amit Khatri <amit.khatri@samsung.com>
Signed-off-by: Rahul Jain <rahul.jain@samsung.com>
2015-06-10 19:06:54 +03:00
Jouni Malinen
995a3a06f4 Document the wpa_msg_cb "global" parameter
Instead of an int variable with magic values 0, 1, 2, use an enum that
gives clearer meaning to the values now that the original boolean type
global argument is not really a boolean anymore.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-06-10 16:02:00 +03:00
Jouni Malinen
e66bcedd3e Do not set own_disconnect_req flag if not connected
This fixes some issues where a disconnection event may get ignored if an
earlier operation to remove or disable a network resulted in an attempt
to disconnect event though no connection was in place.
wpa_s->current_ssid != NULL alone is not sufficient to determine that
there will be a driver event notifying completion of such disconnection
request. Set own_disconnect_req to 1 only if wpa_s->wpa_state is also
indicating that there is a connection or an attempt to complete one.

This showed up in a failure, e.g., when running the hwsim test case
scan_int followed by ap_vlan_wpa2_psk_radius_required where the latter
ended up not processing a connection failure event and getting stuck not
trying to run a new scan and connection attempt.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-06-10 15:42:57 +03:00
Jason A. Donenfeld
8d2ed87d82 wpa_gui: Port to Qt5
This adds support for Qt5 while still preserving support for building
with Qt4. The same source code builds with both Qt versions now. The
functionality should be identical.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2015-06-10 14:03:48 +03:00
Ondřej Caletka
e1ede80d3b eapol_test: Support IPv6 for authentication server
This allows testing RADIUS servers over IPv6.

Signed-off-by: Ondřej Caletka <ondrej@caletka.cz>
2015-06-10 13:53:22 +03:00
MAYANK HAARIT
aa2b12562b P2P: Add GO Intent of connecting device in GO Negotiation Request event
Add GO Intent information of connecting device in GO Negotiation Request
event which will help applications to decide its own GO intent value in
advance and can avoid failure cases when both devices use GO Intent 15
depending on application requirement.

Signed-off-by: Mayank Haarit <mayank.h@samsung.com>
2015-06-06 18:16:39 +03:00
Krishna Vamsi
a80651d067 Add support to request a scan with specific SSIDs
Support a request to scan specific SSIDs given by user with the SCAN
command. The SSID list can be suffixed to the scan command as follows.
For example, if SSIDs "ABC" and "abc123" need to be specifically
scanned, the command should be "SCAN ssid 414243 ssid 616263313233". The
value of the SSID is passed in hexadecimal representation.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-06-05 15:55:26 +03:00
Sunil Dutt
94687a0aae WPS: Allow the priority for the WPS networks to be configured
This commit adds a configurable parameter (wps_priority) to specify the
priority for the networks derived through WPS connection.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-06-04 13:55:16 +03:00
Anton Nayshtut
09d57ce40e wpa_supplicant: Remove trailing whitespace
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-06-02 20:06:55 +03:00
Amit Khatri
dc1a341dec P2P: Add manufacturer info into D-Bus peer interface
Allow the Manufacturer information for a found P2P peer device to be
fetched through the D-Bus interface similarly to p2p_peer <mac address>
on ctrl interface.

Signed-off-by: Amit Khatri <amit.khatri@samsung.com>
Signed-off-by: Rahul Jain <rahul.jain@samsung.com>
Signed-off-by: Ashutosh Kaushik <k.ashutosh@samsung.com>
2015-05-29 21:28:26 +03:00
Nishant Chaprana
333039596e P2P: Add P2P Cancel method over D-Bus interface
This patch adds P2P Cancel method over
fi.w1.wpa_supplicant1.Interface.P2PDevice dbus interface.

Signed-off-by: Nishant Chaprana <n.chaprana@samsung.com>
2015-05-29 21:05:17 +03:00
Nishant Chaprana
87d3c62835 WPS: Add WPS Cancel method over D-Bus interface
Signed-off-by: Nishant Chaprana <n.chaprana@samsung.com>
2015-05-29 20:55:08 +03:00
Purushottam Kushwaha
eda9d84dfd P2P: Fix a potential memory leak in a P2P+NFC corner case
Avoid memory leak due to previous allocation for ssid->ssid. It does not
look like this is hit in normal cases, but at might be possible for the
SSID to get set if the peer is present in previous scan results and WPS
code ends up copying the SSID from there.

Signed-off-by: Purushottam Kushwaha <p.kushwaha@samsung.com>
2015-05-29 20:41:25 +03:00
Krishna Vamsi
701d9729b3 Add libwpa_client build option to use a dynamic library
Add support to compile libwpa_client.so. This can be used by external
programs to interact with the wpa_supplicant control interface. Also
rename the static version of this library to libwpa_client.a to be
consistent with the name used previous in Android builds.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-05-29 15:25:52 +03:00
Krishna Vamsi
ccad05a95c P2P: Restart group formation timer upon receiving new Inv Req
A new Invitation Request might be received on a just started persistent
group if the previous Invitation Response sent isn't received at the
peer (GO of the persistent group). When the peer sends an Invitation
Request again, treat it as start of group formation and restart the
group formation timer at this point of time.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-05-29 13:30:26 +03:00
Sunil Dutt
4d3be9cdd1 Postpone updating of wpa_s->current_bss till association event
In the case of driver-based BSS selection, a bssid_hint in the connect
request might not result in to the selection of the same BSS. Thus,
postpone the updation of the wpa_s->current_bss till the association
event is received unless the BSSID is forced. This fixes issues where
wpa_s->current_bss may end up being updated to point to the BSS that
wpa_supplicant provided as a hint for a roaming case, but then not
restored if the driver decides to "return" to the current BSS instead.
This could result in some operations (e.g., WNM BSS TM response) not
working properly due to incorrect BSS being identified in
wpa_s->current_bss.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-05-29 12:18:13 +03:00
Ilan Peer
b4342ca4d8 P2P: Use p2p_init_wpa_s for P2P command redirection over D-Bus
D-Bus used the p2p_dev member in struct wpa_supplicant to track the
interface used for P2P Device operations. However, this is not needed as
the interface used for P2P Device operations is stored in struct
wpa_global->p2p_init_wpa_s.

Replace all the redirections to wpa_s->p2p_dev with redirections to
wpa_s->global->p2p_init_wpa_s and removed this member as it is no
longer needed.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-05-25 18:31:09 +03:00
Jouni Malinen
96512a00d0 P2P: Fix D-Bus PresenceRequest to use group interface
This command is for a specific P2P group, not for the P2P Device
instance and as such, wpa_s pointer must not be replaced with the
interface that is used for P2P Device management.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-05-25 18:31:09 +03:00
Ilan Peer
b740401f18 P2P: Fix wpas_remove_persistent_peer() to use P2P mgmt interface
The function used wpa_s->parent->conf to iterate the P2P networks and
update the configuration file. However, wpa_s->parent is not
necessarily the interface used to manage the P2P Device operations.

Fix this by accessing the configuration file of the interface
initialized to manage the P2P Device operations.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-05-25 18:31:09 +03:00
Ilan Peer
1e0a02942b P2P: Fix wpas_p2p_add_persistent_group_client() to use P2P mgmt interface
The function used wpa_s->parent->conf to iterate the P2P networks and
update the configuration file. However, wpa_s->parent is not
necessarily the interface used to manage the P2P Device operations.

Fix this by accessing the configuration file of the interface initialized
to managed the P2P Device operations.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-05-25 18:31:09 +03:00
Ilan Peer
86b91c89af P2P: Fix wpas_p2p_set_own_freq_preference() to use P2P mgmt interface
wpas_p2p_set_own_freq_preference() accessed wpa_s->parent->conf to test
if p2p_ignore_shared_freq is set, but wpa_s->parent is not necessarily
the interface used to manage the P2P Device operations.

Fix this by accessing the configuration file of the interface
initialized to manage the P2P Device operations.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-05-25 18:31:09 +03:00
Ben Rosenfeld
43677494fb P2P: Use the P2P Device management interface in wpas_p2p_remove_client()
As wpas_p2p_remove_client() is not necessarily called from the interface
used to manage the P2P Device operations, when removing a client, use
the P2P management interface to iterate over the saved networks and
remove the relevant entries form the P2P GO network blocks.

Signed-off-by: Ben Rosenfeld <ben.rosenfeld@intel.com>
2015-05-25 18:31:09 +03:00
Nishant Chaprana
7b642dc80b P2P: Add D-Bus FindStopped to notify P2P-FIND-STOPPED event
Add D-Bus notification mechanism of P2P-FIND-STOPPED event on
fi.w1.wpa_supplicant1.Interface.P2PDevice interface.

Signed-off-by: Nishant Chaprana <n.chaprana@samsung.com>
2015-05-25 18:31:09 +03:00
Sunil Dutt
d63f1419b5 P2P: Advertize cross connection to WLAN AP on a non-P2P interface
Commit 1c2aa04c96 ('P2P: Do not add P2P
IEs on P2P disabled interface') removed the P2P IEs from association on
non-P2P interface. However, an AP functioning as a P2P manager needs the
cross connection capability of the station (P2P Device). This needs to
be done to meet the P2P specification requirements even if the station
interface has p2p_disabled=1 in case P2P in general is enabled.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-05-25 12:44:53 +03:00
Jouni Malinen
c7dafdf9b0 WPS: Fix build without CONFIG_WPS=y
Commit 5add410162 ('WPS: Use shorter
authentication timeout during no-SelReg iteration') broke the build with
WPS disabled.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-05-24 10:33:26 +03:00
Avraham Stern
a5da657445 dbus: Stop ongoing scheduled scan when scan is requested
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2015-05-03 17:34:54 +03:00
Matti Gottlieb
0c28071872 Fix sending ANQP request to an unknown BSS while associated
While being associated, if an ANQP request is received for a different
AP that doesn't exist in the BSS list, the ANQP request will be sent on
the frequency of the AP that we are currently associated to.

In such a case, it is possible that the ANQP request would be sent on
a channel different than that of the requested AP, potentially delaying
other requests/activities.

Avoid sending the ANQP request to an AP that is not in the BSS list.

Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com>
2015-05-03 17:32:32 +03:00
Andrei Otcheretianski
74197e0adf wpa_cli: Fix memory leak when tracking networks
Fix memory leak introduced in commit
32a097fdd2 ("wpa_cli: Keep track of
available networks") by tracking networks only when in interactive mode.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2015-05-03 17:26:46 +03:00
Oren Givon
4504621f9c TDLS: Add TDLS_LINK_STATUS command to the control interface
Add the TDLS_LINK_STATUS command to the control interface. This command
shows what is the status of our current TDLS connection with the given
peer. Also, add the TDLS_LINK_STATUS command to wpa_cli.

Signed-off-by: Oren Givon <oren.givon@intel.com>
2015-05-03 17:20:24 +03:00
Eduardo Abinader
01e87ef64f IBSS: Check ibss_rsn init before starting new IBSS authentication
Sanity check added to avoid segmentation fault which occurs, when
issuing ibss_rsn ctrl iface cmd and IBSS was not initialized previously
via IBSS network selection.

Signed-off-by: Eduardo Abinader <eduardo.abinader@openbossa.org>
2015-05-03 17:15:00 +03:00
Jouni Malinen
5aeebc48e8 D-Bus Fix network_is_persistent_group() for P2P operations
Commit c2762e410f ('P2P: Update D-Bus
network object semantics during group formation') added this helper
function to determine whether a network block is used for storing a
persistent group information. However, it implemented this in a way that
matches both persistent group storage and an operating persist group
instance. This does not seem to match the expected behavior for the
D-Bus objects, so fix this to match only the persistent group storage
case to avoid registering/unregistered incorrect D-Bus objects for
groups.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-04-29 20:52:22 +03:00
Jouni Malinen
5441da2beb Fix wpas_notify_network_removed()
Commit bb3df9a569 ('notify: Do not raise
any signal from a P2P management interface') was supposed to only change
D-Bus behavior, but it ended up disabling non-D-Bus functionality as
well for some sequences where the P2P Device interface is used.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-04-29 20:51:14 +03:00
Jouni Malinen
e8181e26ef dbus: Add a debug print on fill_dict_with_properties() getter failures
This makes it easier to debug issues with D-Bus property getter
operations.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-04-29 20:43:23 +03:00
Jouni Malinen
8a78e227df D-Bus: Fix operations when P2P management interface is used
Commit 21efc940f6 ('wpa_supplicant: Do not
register a P2P management interface on DBus') hides the special P2P
management interface from D-Bus. However, it did not take into account
the possibility of wpa_s->dbus_path and wpa_s->dbus_new_path being NULL
in such cases on number of code paths within the D-Bus handlers. This
could result in invalid arguments (NULL path) being provided to D-Bus
functions (mainly, dbus_message_iter_append_basic) and NULL pointer
dereference when iterating over all interfaces. Either of these could
make wpa_supplicant process terminate.

Fix this by explicitly checking that the interface-specific D-Bus path
has been registered before using it anywhere with D-Bus handlers. In
addition, find the correct wpa_s instance to fix P2P operations through
D-Bus when the P2P Device interface is used.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-04-29 20:42:25 +03:00
Hamad Kadmany
01a025937c WPS: Add support for 60 GHz band
Handling of WPS RF band for 60 GHz was missing. Add it in all relevant
places and also map "AES" as the cipher to GCMP instead of CCMP when
operating on the 60 GHz band.

Signed-off-by: Hamad Kadmany <qca_hkadmany@qca.qualcomm.com>
2015-04-28 00:22:16 +03:00
Jouni Malinen
0ef1e290ab WPS: Fix shorter authentication timeout during no-SelReg iteration
Commit 5add410162 ('WPS: Use shorter
authentication timeout during no-SelReg iteration') added a new
condition on reducing the authentication timeout for the WPS AP
iteration process. However, due it ended up copy-pasting an incorrect
condition for this. This was supposed to apply for PIN-based config
method advertisement, not PBC.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-04-28 00:12:36 +03:00
Jouni Malinen
a250722f38 Try to set PMK only with key mgmt offload support in the driver
Previously, it was possible for the set_key() handler to be used with
WPA_ALG_PMK even if the driver did not indicate support for key
management offload. While this is not really supposed to result in any
difference, it makes the debug logs somewhat confusing. Avoid that by
using driver capability flag for key management offload as an additional
condition for setting the PMK.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-04-27 16:47:07 +03:00
Jouni Malinen
9f390f431c Interworking: Fix network selection warning without SIM/USIM support
interworking_credentials_available_3gpp() would have left excluded2
uninitialized without INTERWORKING_3GPP in the build. This could result
in a static analyzer warning within
interworking_credentials_available_helper() about use of uninitialized
variable. Get rid of that warning by explicitly initializing excluded2
even though this does not really result in any difference in behavior
since the excluded2 value would be used only if the non-NULL is returned
and that could not have been the case here without INTERWORKING_3GPP.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-04-26 17:00:26 +03:00
Jouni Malinen
5678a2d89b P2P: Allow wpa_supplicant to start if social channels are not supported
It was possible for an nl80211-based driver to be determined to support
P2P even when the radio supports only the 5 GHz band. This resulted in
P2P initialization failing due to not being able to pick a social
channel and wpa_supplicant not starting. Fix this by not enabling P2P,
but still allowing wpa_supplicant initialization to complete.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-04-26 13:59:06 +03:00
Jouni Malinen
a6da824b19 Do not use C++ reserved words as variable names
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-04-26 13:36:55 +03:00
Arkadiusz (Arkq) Bokowy
eaa3728a64 wpa_gui: Themed icon loader
Signal strength meter uses non-standard icons (not included in the
freedesktop icon specification), which might not be available in all
icon sets on the market. What's more, according to the latest Ubuntu
practices, in the status-like places one should use symbolic icons.
Unfortunately not all icon sets provide them.

In order to overcome this inconsistency, we are going to try to load
more than one icon from the current theme in the fallback-like
fashion.

Signed-off-by: Arkadiusz Bokowy <arkadiusz.bokowy@gmail.com>
2015-04-26 11:55:21 +03:00
Jouni Malinen
9a3cb4133d Fix wpa_priv (CONFIG_PRIVSEP=y) build
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-04-25 17:37:53 +03:00
Mikael Kanstrup
8b423edbd3 Declare all read only data structures as const
By analysing objdump output some read only structures were found in
.data section. To help compiler further optimize code declare these
as const.

Signed-off-by: Mikael Kanstrup <mikael.kanstrup@sonymobile.com>
2015-04-25 17:33:06 +03:00
Jouni Malinen
5add410162 WPS: Use shorter authentication timeout during no-SelReg iteration
When iterating through WPS APs that do not advertise Selected Registrar
TRUE, limit the authentication timeout to 10 seconds instead of the full
70 second value used with IEEE 802.1X/EAP/WPS in general. This helps
speed up AP iteration for cases where a selected AP misbehaves and does
not reply to EAP exchanges. This should not really be needed, but there
seems to be deployed APs that do not implement WPS correctly and with
such APs in the radio range, this extra timeout can speed up the
iteration to allow the correct AP to be found before the WPS operation
times out.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-04-24 17:55:32 +03:00
Hu Wang
e7d20342b5 WPS: Enforce five second minimum time before AP iteration
Previously, wpa_supplicant was using number of scan iterations
(WPS_PIN_SCAN_IGNORE_SEL_REG = 3) to give some time for finding a WPS AP
with Selected Registrar TRUE before starting to iterate through all WPS
APs. While this works fine in most cases, some drivers may return the
initial three scan results so quickly that the total amount of time is
only couple of seconds in case none of the APs are initially advertising
Selected Registrar TRUE. To give some more time for APs (WPS Registrars)
to become ready, add an additional constraint on the iteration based on
time (WPS_PIN_TIME_IGNORE_SEL_REG = 5 seconds).

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-04-24 17:55:32 +03:00