Commit graph

115 commits

Author SHA1 Message Date
Jouni Malinen
065c3cb8d1 tests: wpa_supplicant SET relative RSSI
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-10 19:48:12 +02:00
Jouni Malinen
d85b1aa6de tests: More GET wifi_display coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-08 16:52:56 +02:00
Jouni Malinen
74582acc14 tests: wpa_supplicant SET tdls_trigger_control
Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-08 16:48:59 +02:00
Jouni Malinen
35b023b79a tests: wpa_supplicant SET radio_disabled
Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-08 14:54:01 +02:00
Jouni Malinen
22e0dade9a tests: wpa_supplicant SET lci error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-08 14:51:09 +02:00
Jouni Malinen
0c8d7b085c tests: wpa_supplicant BSS CURRENT command
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-12-21 12:46:14 +02:00
Jouni Malinen
c64b454a2f tests: Fix wpas_ctrl_sched_scan_plans without WPA_TRACE
This test case did not clear sched_scan_plans if alloc_fail() resulted
in skipping the test case. This would result in the following
autoscan_exponential and autoscan_periodic test cases failing.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-03 11:35:42 +03:00
Jouni Malinen
ce4af56322 tests: DRIVER_FLAGS command
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-23 20:51:55 +03:00
Jouni Malinen
bc6e32880f tests: Remove extra semicolons from python scripts
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-03 22:37:01 +03:00
Jouni Malinen
52be7b4116 tests: wpa_supplicant P2P_LO_START and P2P_LO_STOP commands
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-03 22:37:00 +03:00
Jonathan Afek
9fd6804d61 tests: Mark 525 tests as remote compatible
After successfully passing the 525 tests on a remote setup mark the
tests as remote compatible.

Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
2016-06-27 21:47:37 +03:00
Jonathan Afek
40c62e6e8d tests: Use cmd_execute() for ip addr add/del
The hwsim tests used to execute shell commands in the tests using the
subprocess python module. Use the cmd_execute() general function for
executing "ip addr add/del .." so that this would also work on remote
setups.

Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
2016-06-27 21:10:35 +03:00
Jouni Malinen
3d53cd50ab tests: More coverage in wpas_ctrl_sched_scan_plans
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-05-28 23:00:42 +03:00
David Spinadel
51269b386a tests: Add RRM tests
1. Add tests for hostapd neighbor database and neighbor report and
   request. Remove the partial neighbor report request test from
   test_wpas_ctrl.py since they are now covered more completely in
   test_rrm.py.
2. Add LCI request test.
3. Add FTM range request signaling test. This covers only the control
   interface commands and measurement request/response exchange for now.
   Full end-to-end functionality requires support of station reporting
   RRM capability.

Signed-off-by: David Spinadel <david.spinadel@intel.com>
2016-04-17 18:32:18 +03:00
David Spinadel
bf767ac136 tests: Replace radio_measurements with rrm_neighbor_report
This moves neighbor report testing to use the new hostapd.conf
parameter.

Signed-off-by: David Spinadel <david.spinadel@intel.com>
2016-04-16 21:05:40 +03:00
David Spinadel
56de6fe4fe tests: Update NEIGHBOR_REP_REQUEST format
Use quotation marks to match the new SSID encoding format in the
NEIGHBOR_REP_REQUEST command. In this specific test case, the exact SSID
value did not make any difference for behavior. The previous version
ended up getting decoded as a hexstring after the NEIGHBOR_REP_REQUEST
format change. The new version goes back to the ASCII string version of
"abcdef".

Signed-off-by: David Spinadel <david.spinadel@intel.com>
2016-04-16 21:05:39 +03:00
Janusz Dziedzic
8b8a1864ff tests: Pass full apdev to add_ap() function (1)
Pass the full apdev to the add_ap() function instead of just ifname.
This allows us to handle also remote hosts while we can check
apdev['hostname'], apdev['port'].

This step (1) converts the cases where apdev[#]['ifname'] was used as
the argument to hostapd.add_ap().

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-04-03 22:45:57 +03:00
Jouni Malinen
eaef5861d7 tests: Fix wpas_ctrl_oom
The OpenSSL memory allocation changes broke this test case. Fix this by
removing the cases that do not get triggered anymore and add a separate
wpas_ctrl_error test case to cover the fail_test() versions of errors.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-01-15 16:27:13 +02:00
Jouni Malinen
27f6b03115 tests: wpa_supplicant SIGNAL_MONITOR command
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-18 21:02:37 +02:00
Jouni Malinen
be90370bd5 tests: Fix wpas_ctrl_country and dbus_country with valid db.txt
init=CORE was previously used due to invalid db.txt data for 00. For
now, allow both it and the new init=USER after fixed db.txt.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-12 12:45:30 +02:00
Jouni Malinen
c00f19061c tests: wpa_supplicant sched_scan_plans parsing
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-30 14:03:29 +02:00
Jouni Malinen
c5ef7bbfa5 tests: Fix wpas_ctrl_oom with the internal TLS implementation
One of the OOM cases does not apply for internal crypto implementation.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-29 20:43:44 +02:00
Jouni Malinen
c675f669c3 tests: Fix wpas_ctrl_network without SAE
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-29 20:38:34 +02:00
Jouni Malinen
05bc2b44c1 tests: INTERFACE_ADD create testing coverage
This covers an invalid interface type and interface type 'sta'.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-22 17:59:54 +02:00
Ilan Peer
061190308d tests: wpa_supplicant interface creation in AP mode
Add a test case that creates a new interface in AP mode.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-11-22 17:54:07 +02:00
Jouni Malinen
d0f56772ea tests: Fix wpas_ctrl_network for builds without Suite B support
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-02 00:30:00 +02:00
Jouni Malinen
1720ff58ec tests: More SET_CRED coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-01 01:03:45 +02:00
Jouni Malinen
dd5e61b4d8 tests: Additional SET_NETWORK coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-01 00:46:09 +02:00
Jouni Malinen
4128f53d8b tests: Additional wpa_supplicant SET ctrl_iface command coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-01 00:28:35 +02:00
Jouni Malinen
3392a90dec tests: Clear config_methods at the end of wpas_ctrl_set_wps_params
It was possible for dev[2] to be left with non-default config_methods
parameter at the end of the test case and that could result issues in
following test cases. This hit a failure in the following sequence:
wpas_ctrl_set_wps_params p2ps_channel_active_go_and_station_same

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-31 21:56:59 +02:00
Avraham Stern
c5d070f249 tests: Set MAC address in wpas_ctrl_interface_add2 test
mac80211_hwsim only supports 2 different MAC addresses.
Configurations that use a dedicated P2P Device interface already
use these 2 addresses, so adding another interface on the same
PHY results in a duplicated MAC address.

Fix this by changing the MAC address of the added interface to make
sure the new interface has a unique MAC address.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2015-10-16 20:26:48 +03:00
Jouni Malinen
35d2e24bc7 tests: Read monitor events explicitly in wpas_ctrl_interface_add_many
This test case ended up hitting control socket output queue limit
unnecessarily due to the test script not reading pending event messages.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-04 18:52:38 +03:00
Jouni Malinen
d9052150eb tests: wpa_supplicant control socket and event burst
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-04 18:52:38 +03:00
Jouni Malinen
6b86872a7c tests: Control interface output buffer limit
This verifies wpa_supplicant behavior in number of cases where the
external program opening a control interface socket does not behave
properly.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-14 21:21:00 +03:00
Jouni Malinen
492f007ec5 tests: Various wpa_supplicant ctrl_iface OOM cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-08 23:52:43 +03:00
Jouni Malinen
ccfe3e5db9 tests: wpa_supplicant ctrl_iface network OOM in string parsing
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-19 23:07:04 +03:00
Jouni Malinen
523061996c tests: wpa_supplicant control interface wait for client
This test case is also adding code coverage for process daemonizing and
Linux tracing.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-19 23:07:04 +03:00
Jouni Malinen
5b0afb0a29 tests: UUID parsing error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-19 22:04:50 +03:00
Jouni Malinen
2531dc9f6b tests: wpa_supplicant ctrl_iface DUP_NETWORK (global)
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 18:26:16 +03:00
Jouni Malinen
1275208c82 tests: Update wpas_ctrl_network to match removal of WEP as group cipher
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-20 23:04:31 +03:00
Ben Rosenfeld
2e96aef298 tests: Wait on the global control interface for CTRL-EVENT-REGDOM-CHANGE
The event is not interface specific, so wait for it on the global
control interface socket.

Signed-off-by: Ben Rosenfeld <ben.rosenfeld@intel.com>
2015-06-19 11:31:53 +03:00
Jouni Malinen
5bf30c6715 tests: wpa_supplicant INTERFACE_ADD/REMOVE with large number of vifs
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-04-24 01:22:15 +03:00
Jouni Malinen
138bf11852 tests: INTERFACE_ADD/REMOVE with vif without creation/removal
This is also a regression test for INTERFACE_ADD parsing.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-04-04 11:02:22 +03:00
Jouni Malinen
25f2cb618c tests: INTERFACE_ADD/REMOVE with vif addition/removal
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-03-26 22:20:35 +02:00
Jouni Malinen
7ebc7e8fa6 tests: wpa_supplicant DUMP/GET global parameter
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-02-08 22:49:58 +02:00
Jouni Malinen
874057da4e tests: Make wpas_ctrl_many_networks more robust under valgrind
It is possible for a low powered CPU to take excessively long time to
delete 1000 network blocks when running under valgrind. This would have
resulted in the test case failing and the following reset operation
timing out which would then stop the test sequence completely.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-02-08 13:25:35 +02:00
Ilan Peer
75826fc6e6 tests: Use global control interface in wpas_ctrl_global
Use the global control interface to set/get the status of the
P2P Device.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-02-07 15:37:13 +02:00
Jouni Malinen
c4668009d0 tests: Remove unnecessary use of sudo from test cases
run-tests.py is running as root, so sudo does not need to be used
anymore from within each test case.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-07 15:37:13 +02:00
Jouni Malinen
90ad11e625 tests: Make active scans more robust
This makes testing under very heavy load or under extensive kernel
debugging options more robust by allowing number of test cases to scan
multiple times before giving up on active scans. The main reason for
many of the related test failures is in Probe Response frame from
hostapd not getting out quickly enough especially when multiple BSSes
are operating.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-23 00:52:40 +02:00
Jouni Malinen
615d8a9705 tests: Add room for more vendor elems in wpas_ctrl_vendor_elem
This test case was verifying that the first unused VENDOR_ELEM value
above the current maximum is rejected. That makes it a bit inconvenient
to add new entries, so increase the elem value to leave room for new
additions without having to continuously modify this test case.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-14 01:12:56 +02:00