Commit graph

25 commits

Author SHA1 Message Date
Masashi Honma
255f3846a9 tests: ap_eap test requires more memory in VM
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2019-01-26 13:05:44 +02:00
Jouni Malinen
2cef6f6e89 tests: Enable dynamic debug from cfg80211/mac80211
These debug logs were lost due to CONFIG_DYNAMIC_DEBUG=y.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-12-22 00:18:33 +02:00
Lubomir Rintel
c6ba02154e tests: Enable dynamic debugging for mac80211_hwsim
mac80211_hwsim module typically dumps a lot of details into the kernel
message buffer. While it's probably okay in a dedicated VM, it's way too
chatty in other setups.

The kernel allows fine-tuning logging via the dynamic debugging
facility. Let's enable all logging locations in the mac80211_hwsim
module so that we don't loose debugging output when the kernel adopts
the dynamic debug mechanism for the driver.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
2017-11-26 11:47:46 +02:00
Johannes Berg
23fcfd6004 tests: Allow passing more arguments to vm-run.sh
The script is currently limited by the maximum kernel command line
length and if that's exceeded the kernel panics at boot. Fix this by
writing the arguments to a file and reading it in the VM.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-11-30 14:03:28 +02:00
Johannes Berg
680ce356c0 tests: Honor HWSIM_TEST_LOG_DIR variable in VM runs
If /tmp has a relatively small size limit, or multiple people run the
tests on the same machine, using the same output directory can easily
cause problems.

Make the test framework honor the new HWSIM_TEST_LOG_DIR environment
variable to make it easier to avoid those problems.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-11-27 21:11:53 +02:00
Dan Williams
d7273180c6 tests: Fix VM tests for Fedora
Binaries aren't always in /usr/bin/, plus kvm is sometimes 'qemu-kvm'.

Signed-off-by: Dan Williams <dcbw@redhat.com>
2015-10-14 19:23:00 +03:00
Anton Nayshtut
41a256ecd9 tests: Add FST module tests
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 18:26:16 +03:00
Jouni Malinen
8412dd52d1 tests: Increase default VM memory from 128M to 192M
It looks like the 128M default memory size for the hwsim test setup was
not large enough to cover all the needs anymore. Some of the test cases
using tshark could hit OOM with that size. Increase the default
allocation to 192M to avoid this type of issues.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-25 19:02:43 +02:00
Jouni Malinen
5554fbef46 tests: Make parallel VM start a bit more resource friendly
Wait one second between each kvm start to avoid hitting large number of
processes trying to start in parallel. This allows the VMs to be started
more efficiently for parallel-vm.py runs with large number of VMs.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-21 22:04:54 +02:00
Jouni Malinen
f24489d94f tests: Use new scripts for vm-run.sh codecov
Now there is only one set of commands to maintain. The separate reports
for individual components have not been of much use in the past, so they
are dropped for now.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-21 16:41:59 +02:00
Jouni Malinen
e0cccf26a4 tests: Add --codecov support to parallel-vm.py
This allows code coverage report to be generated must faster with the
help of parallel VMs executing test cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 01:24:28 +02:00
Jouni Malinen
7e6942253c tests: Use a single timestamp in all vm-run.sh instances
This avoids possible mismatches in directory and log file timestamps if
the UNIX timestamp (seconds) changes during the startup sequence.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-16 22:24:18 +02:00
Ilan Peer
006a1c4d3b tests: Make vm-run.sh arguments non-positional
This was currently breaking parallel-run.*, as it was passing
--split num/num parameters (intended for rnu-tests.py)
to vm-run.sh which broke the --codecov and --timewrap options.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2014-11-01 17:55:23 +02:00
Johannes Berg
1e3c7e82b5 tests: Disable support_p2p_device by default
When loading the hwsim module, disable support_p2p_device by default.
This will also become the default in the kernel, but until then it
makes sure it's not turned on by default.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-22 10:53:52 +03:00
Jouni Malinen
09e38c2fce tests: Add scripts to allow parallel execution of tests in VMs
"parallel-vm.sh <number of VMs> [arguments..]" can now be used to run
multiple VMs in parallel to speed up full test cycle significantly. In
addition, the "--split srv/total" argument used in this design would
also make it possible to split this to multiple servers to speed up
testing.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-24 23:37:42 +02:00
Jouni Malinen
1cfb58d400 tests: Build hlr_auc_gw separately for code coverage analysis
This improves accuracy of the code coverage reports with hostapd-as-AS
and hlr_auc_gw getting analyzed separately.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-15 17:08:38 +02:00
Johannes Berg
ac5e8631e6 hwsim tests: vm: add optional time-warp
To test the code under the influence of time jumps, add the option
(--timewarp) to the VM tests to reset the clock all the time, which
makes the wall clock time jump speed up 20x, causing gettimeofday()
to be unreliable for timeout calculations.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2014-01-17 12:00:20 +02:00
Johannes Berg
fd77e594a4 hwsim tests: vm: read a config file from $HOME
The vm-config in the subdirectory is less useful as it
will get removed by "git clean" and similar, so read a
config file from ~/.wpas-vm-config in addition.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-01-14 17:08:04 +02:00
Jouni Malinen
9489637b42 tests: Verify dynamic wpa_supplicant interface addition/removal
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-31 15:45:18 +02:00
Jouni Malinen
4472aafbe0 tests: Generate a combined code coverage report
This combines coverage from all three separate reports into a single
report.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-28 16:32:54 +02:00
Jouni Malinen
3f33b3ad8c tests: Collect code coverage separately from each component in vm
Use a more robust design for collecting the gcov logs from the case
where test cases are run within a virtual machine. This generates a
writable-from-vm build tree for each component separately so that the
lcov and gcov can easily find the matching source code and data files.
In addition, prepare the reports automatically at the end of the
vm-run.sh --codecov execution.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-27 18:11:07 +02:00
Jouni Malinen
f4bfa2d27f tests: Allow gcov to be used when running test cases within vm
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-26 13:37:06 +02:00
Johannes Berg
4ecf11c559 hwsim tests: Make channel configuration for VM tests easier
Add a CHANNELS configuration to the script running the VM
that can be added to the vm-config file to allow running
the tests with hwsim devices supporting more than a single
channel.

Eventually, with the (hopefully) upcoming dynamic work in
mac80211_hwsim, this might go away entirely, but for now
this allows testing more code paths.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-11-07 14:01:06 +02:00
Johannes Berg
1cd3eae362 hwsim tests: Allow setting KERNEL and KVMARGS
Rather than just having KERNELDIR, allow setting KERNEL directly.
Also remove the -s option that prevents running multiple machines
at the same time, but add a KVMARGS= variable that can be used to
restore that if needed.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-11-02 10:01:09 +02:00
Johannes Berg
970d3b096f hwsim tests: Add scripts to run in a VM
Instead of running on the host, it can be useful to run in a
VM, particularly to test kernel rather than userspace changes,
so add a few scripts that allow doing so easily.

The basic idea is that the VM kernel is the same architecture
as the host kernel, so the host's root filesystem can be used
(in read-only mode) to run everything. Only a log filesystem
is mounted read-write and will get all the test output.

The kernel console output is collected to a special 'console'
file in the logs directory and kernel crashes are detected.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-10-31 11:08:16 +02:00