Commit graph

57 commits

Author SHA1 Message Date
Jonathan Afek
e2f3f0232f tests: Use 10 retries for over-the-air broadcast connectivity
The regular hwsim tests use both unicast and broadcast frames to test
the connectivity between 2 interfaces. For real hardware (remote hwsim
tests) the broadcast frames will sometimes not be seen by all connected
stations since they can be in low power mode during DTIM or because
broadcast frames are not ACKed. Use 10 retries for broadcast
connectivity tests for real hardware so that the test will pass if we
successfully received at least one of them.

Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
2016-05-28 16:33:41 +03:00
Janusz Dziedzic
fb1a7dccbf tests: Return hapd when add_bss() and add_iface() are used
Return hapd from add_bss() and add_iface() while we can next use it.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-04-24 16:18:50 +03:00
Janusz Dziedzic
625bf74436 tests: Pass apdev param to HostapdGlobal()
Pass apdev param to HostapdGlobal() to support operating with a remote
test host.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-04-24 16:18:49 +03:00
Janusz Dziedzic
9cd6f4c015 tests: Pass apdev to hostapd.add_bss()
Pass apdev param to hostapd.add_bss(). Kill hardcoded phy param and get
phy base on apdev. These are needed to support operation with a remote
test host.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-04-24 16:18:46 +03:00
Janusz Dziedzic
29444a0863 tests: Pass apdev to hostapd.add_iface()
Pass apdev param to hostapd.add_iface() to support operation with a
remote test host.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-04-24 11:58:55 +03:00
Janusz Dziedzic
369f712a40 tests: Pass apdev to hostapd.terminate()
Pass apdev dictionary to hostapd.terminate() to support operation with a
remote test host.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-04-24 11:51:06 +03:00
Janusz Dziedzic
c92ee957ca tests: Pass apdev to remove_bss()
We need this for remote host support. From apdev we can get
apdev['hostname'] and apdev['port'].

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-04-24 11:47:03 +03:00
Janusz Dziedzic
78b8319317 tests: Allow full apdev to be passed to add_ap() function
This allows the full apdev dict to be passed to the add_ap() function
instead of just ifname. This allows us to handle also remote hosts while
we can check apdev['hostname'], apdev['port']. The old style ifname
argument is still accepted to avoid having to convert all callers in a
single commit.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-04-03 22:32:26 +03:00
Janusz Dziedzic
d4944fad72 tests: Improve debug logs in hostapd/wpasupplicant with remote commands
Show more info when we are using remote wpaspy and UDP-based control
interface.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-03-20 21:49:35 +02:00
Janusz Dziedzic
8ce4855b23 tests: hostapd.py/wpasupplicant.py use Host when executing commands
Execute commands using the Host class. This enables use of remote hosts
as well.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-03-20 21:49:26 +02:00
Jouni Malinen
865fa1e9ea tests: PMKSA cache control interface operations
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-03-20 18:06:03 +02:00
Janusz Dziedzic
c0ca24fc30 tests: Add hostapd.py helpers for various radio parameters
Add support for generating hostapd parameters for
b_only/g_only/a_only/HT20/HT40/VHT80.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-03-05 17:44:51 +02:00
Janusz Dziedzic
e3b36d420e tests: Add terminate support for hostapd/wpa_supplicant
Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-03-05 17:44:51 +02:00
Janusz Dziedzic
4d48d44ca2 tests: Add HostapdGlobal.get_ctrl_iface_port()
This adds a method to get the UDP port for an interface.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-03-05 17:44:51 +02:00
Janusz Dziedzic
cb73f7e84d tests: Add UDP ctrl_iface support to hostapd.py
Allow use of a remote host using wpaspy.Ctrl with UDP ctrl_iface
support.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-03-05 17:44:51 +02:00
Jouni Malinen
57ff37d0e8 tests: Speed up hostapd_oom_loop tests
At some point, these hostapd_oom_* test cases started to fail with
wpa_msg() allocation failure for the AP-ENABLED event. This resulted in
unnecessary long test execution (waiting 30 seconds for an event that
was dropped). Speed this up by using a shorter timeout.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-04 18:52:38 +03:00
Jouni Malinen
087632168b tests: Add hostapd interface with driver specified
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-17 23:57:04 +03:00
Anton Nayshtut
6f7b96145f tests: hostapd global-to-local control interface redirection
This implements basic global-to-local control interface command
redirection tests.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 20:23:26 +03:00
Anton Nayshtut
41a256ecd9 tests: Add FST module tests
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 18:26:16 +03:00
Jouni Malinen
2496adf046 tests: IEEE 802.1X and EAPOL Authenticator aWhile handling
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-12 11:45:16 +03:00
Michael Braun
54cf411f4c tests: Verify correct VLAN operation in multi-BSS multi-VLAN case
This adds hwsim test ap_vlan_iface_cleanup_multibss. It connects two
stations in different BSS but the same hostapd process. First both
stations are in VLAN 1, then they get reauthenticated into VLAN 2. Due
to the ordering of the stations moving around, this test checks that
bridge and tagged interface referencing counting is done globally, such
that the tagged interface is not removed too early and no bridge is
left over.

Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
2015-06-14 13:40:50 +03:00
Jouni Malinen
f6420942cb tests: Add own_addr() for both Hostapd and WpaSupplicant classes
This makes it easier to use instances of control interfaces in common
code without having to separately address hostapd and wpa_supplicant
behavior differences.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-19 22:27:37 +03:00
Jouni Malinen
138ec97ee5 tests: PSK file error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-29 09:51:54 +02:00
Jouni Malinen
650383134d tests: hostapd GET_CONFIG key_mgmt values
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-22 19:01:34 +02:00
Jouni Malinen
00f74dbdb6 tests: Verify hostapd ENABLE/DISABLE/ENABLE
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-13 20:41:54 +02:00
Jouni Malinen
f8ad9dc21a tests: Check for AP-DISABLED when setting up AP
This allows a critical error to be noticed more quickly and reported
more clearly in the test log.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-12 13:55:05 +02:00
Jouni Malinen
c2149b08da tests: Wait longer for hostapd REMOVE command to complete
Some kernel debugging options (especially
CONFIG_DEBUG_KOBJECT_RELEASE=y) can add significant blocking time to
interface removal with NL80211_CMD_DEL_INTERFACE and
SIOCGIFBR(BRCTL_DEL_BRIDGE) block for 1-8 seconds. This could result in
the VLAN test cases failing due to a wpaspy timeout on the REMOVE
command even though the issue was only in the kernel debugging code
making the operations significantly slower. Work around this by using a
longer timeout for that control interface command to allow this type of
debug kernel to be used.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-12 11:42:59 +02:00
Jouni Malinen
97de642ae3 tests: HS 2.0 OSU and icon fetch
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-02 10:35:34 +02:00
Jouni Malinen
5be9dcbb86 tests: Remove unnecessary interpreter line from most python files
Only run-tests.py is actually executed, so there is no need to specify
the interpreter in all the helper files and test script files.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-21 20:21:53 +02:00
Jouni Malinen
4fcee244b9 tests: Verify RADIUS server MIB values
Enable hostapd control interface for the RADIUS server instance and
verify that the RADIUS server MIB counters are incremented.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-15 21:39:31 +02:00
Jouni Malinen
cce26eb411 tests: ctrl_iface STA-FIRST and STA-NEXT iteration
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-02-04 13:10:57 +02:00
Jouni Malinen
f8949f5f8f tests: Reset hostapd state with FLUSH between test cases
This is similar to the FLUSH command for wpa_supplicant.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-27 22:08:13 +02:00
Jouni Malinen
a36158befe tests: Add get_driver_status for Hostapd
This is identical to the same command in WpaSupplicant class.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:12 +02:00
Jouni Malinen
36408936f8 tests: Optimize wait_event()
Replace the fixed 100 ms waits with a select()-based wait and timeout
for full wait based on monotonic time to optimize wait_event().

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:10 +02:00
Jouni Malinen
d45e417f7b tests: Clean up hostapd ctrl_iface debug logging
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:10 +02:00
Jouni Malinen
5dec879d5b tests: Verify STA command output and EAPOL state
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-02 18:10:30 +02:00
Jouni Malinen
7fd15145ff tests: RADIUS
This adds initial set of test cases to increase RADIUS testing coverage.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-31 19:03:39 +02:00
Jouni Malinen
71390dc87e tests: Verify WPA-Enterprise functionality
All the previous EAP test cases were using WPA2-Enterprise.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-29 10:00:31 +02:00
Jouni Malinen
6435799b85 tests: Add WNM test cases
These are not yet complete, but at least some frame exchanges can
be verified for WNM operations.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-27 20:04:27 +02:00
Jouni Malinen
629dbdd36a tests: Wait for AP-ENABLED
It takes some time for hostapd to complete AP startup. In some cases,
this could potentially result in station starting a scan before the AP
is beaconing or ready to reply to probes. To avoid such race conditions,
wait for AP-ENABLED before going ahead with the test cases.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-27 18:11:07 +02:00
Jouni Malinen
bfe375ec77 tests: Verify behavior on incorrect GAS response type
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-26 16:55:45 +02:00
Jouni Malinen
b47750beba tests: Add test cases for automatic channel selection
This extends the Hostapd class to support monitor interface events and
STATUS command similarly to the WpaSupplicant class so that internal
hostapd state can be verified in more detail.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-03 21:30:31 +02:00
Jouni Malinen
77990cd7a9 tests: Add test case for multi-BSS configuration file
Verify that a single configuration file can be used to initiate multiple
BSSes in hostapd and that these BSSes can then be dynamically removed.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-03 20:20:50 +02:00
Jouni Malinen
75428961d9 tests: Split hostapd debug log into per test case files
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-02 11:53:38 +02:00
Jouni Malinen
a633397756 tests: Test dynamic BSS addition/removal
test_ap_bss_add_remove verifies hostapd behavior when BSSes are
added/removed in multi-BSS configuration.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-31 23:04:50 +02:00
Jouni Malinen
c9aa430896 tests: Split run-tests.py logger info into per test case files
The run-tests.py -l argument does not take an argument value anymore.
Instead, debug output is directed to a separate file <test>.log for each
test case.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-31 12:51:08 +02:00
Jouni Malinen
789b9f1d52 tests: Enable verbose logger_stdout debug in hostapd
This makes hostapd debug logs more helpful for debugging.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-10-30 00:38:57 +02:00
Jouni Malinen
9626962d2f tests: Add test cases for WPA2-Enterprise
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-29 20:35:26 +03:00
Jouni Malinen
cd7f1b9a1d tests: Add test cases for Fast BSS Transition
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-24 16:05:40 +03:00
Jouni Malinen
8c87f65f32 tests: Use /var/run/hostapd-global to avoid socket file in work dir
This makes some cases more convenient with read-only file systems.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-10 17:09:55 +03:00