Commit graph

14308 commits

Author SHA1 Message Date
Davina Lu
66819b07b5 hostapd: Support Multi-AP backhaul STA onboarding with WPS
The Wi-Fi Alliance Multi-AP Specification v1.0 allows onboarding of a
backhaul STA through WPS. To enable this, the WPS Registrar offers a
different set of credentials (backhaul credentials instead of fronthaul
credentials) when the Multi-AP subelement is present in the WFA vendor
extension element of the WSC M1 message.

Add new configuration options to specify the backhaul credentials for
the hostapd internal registrar: multi_ap_backhaul_ssid,
multi_ap_backhaul_wpa_psk, multi_ap_backhaul_wpa_passphrase. These are
only relevant for a fronthaul SSID, i.e., where multi_ap is set to 2 or
3. When these options are set, pass the backhaul credentials instead of
the normal credentials when the Multi-AP subelement is present.

Ignore the Multi-AP subelement if the backhaul config options are not
set. Note that for an SSID which is fronthaul and backhaul at the same
time (i.e., multi_ap == 3), this results in the correct credentials
being sent anyway.

The security to be used for the backaul BSS is fixed to WPA2PSK. The
Multi-AP Specification only allows Open and WPA2PSK networks to be
configured. Although not stated explicitly, the backhaul link is
intended to be always encrypted, hence WPA2PSK.

To build the credentials, the credential-building code is essentially
copied and simplified. Indeed, the backhaul credentials are always
WPA2PSK and never use per-device PSK. All the options set for the
fronthaul BSS WPS are simply ignored.

Signed-off-by: Davina Lu <ylu@quantenna.com>
Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Marianna Carrera <marianna.carrera.so@quantenna.com>
2019-02-18 22:35:41 +02:00
Davina Lu
83ebf55865 wpa_supplicant: Support Multi-AP backhaul STA onboarding with WPS
The Wi-Fi Alliance Multi-AP Specification v1.0 allows onboarding of a
backhaul STA through WPS. To enable this, the backhaul STA needs to add
a Multi-AP IE to the WFA vendor extension element in the WSC M1 message
that indicates it supports the Multi-AP backhaul STA role. The Registrar
(if it support Multi-AP onboarding) will respond to that with a WSC M8
message that also contains the Multi-AP IE, and that contains the
credentials for the backhaul SSID (which may be different from the SSID
on which WPS is performed).

Introduce a new parameter to wpas_wps_start_pbc() and allow it to be
set via control interface's new multi_ap=1 parameter of WPS_PBC call.
multi_ap_backhaul_sta is set to 1 in the automatically created SSID.
Thus, if the AP does not support Multi-AP, association will fail and
WPS will be terminated.

Only wps_pbc is supported.

This commit adds the multi_ap argument only to the control socket
interface, not to the D-Bus interface.

Since WPS associates with the fronthaul BSS instead of the backhaul BSS,
we should not drop association if the AP announces fronthaul-only BSS.
Still, we should only do that in the specific case of WPS. Therefore,
add a check to multi_ap_process_assoc_resp() to allow association with a
fronthaul-only BSS if and only if key_mgmt contains WPS.

Signed-off-by: Davina Lu <ylu@quantenna.com>
Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Cc: Marianna Carrera <marianna.carrera.so@quantenna.com>
2019-02-18 22:35:41 +02:00
Arnout Vandecappelle (Essensium/Mind)
56a2d788f9 WPS: Add multi_ap_subelem to wps_build_wfa_ext()
The Multi-AP specification adds a new subelement to the WFA extension
element in the WPS exchange. Add an additional parameter to
wps_build_wfa_ext() to add this subelement. The subelement is only added
if the parameter is nonzero. Note that we don't reuse the existing
MULTI_AP_SUB_ELEM_TYPE definition here, but rather define a new
WFA_ELEM_MULTI_AP, to make sure the enum of WFA subelement types for WPS
vendor extension remains complete.

For now, all callers set the multi_ap_subelem parameter to 0.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2019-02-18 20:30:26 +02:00
Arnout Vandecappelle (Essensium/Mind)
cb3c156e7b tests: Update multi_ap_fronthaul_on_ap to match implementation
Now that the backhaul STA Multi-AP association is not rejected anymore
by the AP, update the test case to expect disconnection to be triggered
by the STA.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2019-02-18 20:26:32 +02:00
Arnout Vandecappelle (Essensium/Mind)
bfcdac1c8b Multi-AP: Don't reject backhaul STA on fronthaul BSS
The Multi-AP specification only specifies that information elements have
to be added to the Association Request and Association Response frame;
it doesn't specify anything about what should be done in case they are
missing. Previously, we rejected non-backhaul associations on a
backhaul-only BSS, and non-fronthaul associations on a fronthaul-only
BSS.

However, this makes WPS fail when fronthaul and backhaul are separate
SSIDs. Indeed, WPS for the backhaul link is performed on the *fronthaul*
SSID. Thus, the Association Request frmae used for WPS *will* contain
the Multi-AP IE indicating a backhaul STA. Rejecting that association
makes WPS fail.

Therefore, accept a multi-AP backhaul STA Association Request frame on a
fronthaul-only BSS. Still issue a warning about it, but only at level
DEBUG intead of INFO. Also change the condition checking to make it
clearer.

While we're at it, also fix the handling of unexpected bits in the
Multi-AP IE. 4 bits are reserved in the specification, so these
certainly have to be ignored. The specification also doesn't say that
setting one of the other bits is not allowed. Therefore, only report
unexpected values in the Multi-AP IE, don't reject because of it. Note
that a malformed IE (containing more than one byte) still triggers a
rejection.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2019-02-18 20:21:01 +02:00
Arnout Vandecappelle (Essensium/Mind)
a1debd3384 tests: Refactor test_multi_ap
With just one additional argument, the run_multi_ap_association()
function can be used for all tests.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2019-02-18 20:15:22 +02:00
Purushottam Kushwaha
7ad7aa0e12 HS 2.0: Make hs20-osu-client SP and <FQDN> directories group writable
This updates SP/<FQDN> directory with following permissions on Android
to allow moving certificate at runtime from Cert/ to SP/<FQDN> folder:
 - user:read/write/exec
 - group:read/write/exec
(i.e., add group write permission)

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-02-18 19:54:36 +02:00
Jouni Malinen
0f9632ceb8 mesh: More consistent checking of wpa_s->ifmsh in completion handler
It does not look like wpa_s->ifmsg could be NULL here, but better be
more consistent anyway to keep static analyzers happier by avoiding
dereference of wpa_s->ifmsh in the function before the NULL check for
it.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-02-18 18:46:40 +02:00
Jouni Malinen
61929f4b07 tests: Empty token in wpa_psk_file
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-02-18 18:41:43 +02:00
Jouni Malinen
2fae58fdc1 Fix wpa_psk_file parser error case handling
str_token() can return NULL for the name if the remaining token contains
only the delimiter. Fix this to avoid NULL pointer dereference with a
corner case of an invalid value used in the configuration.

Fixes: ec5c39a557 ("AP: Allow identifying which passphrase station used with wpa_psk_file")
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-02-18 18:41:32 +02:00
Jouni Malinen
5a3a131993 tests: Mark log files to use utf-8 encoding
This seems to be needed when using python3 in VM for the ssid_utf8 test
case debug prints from the control interface requests. This breaks
python2 support for the same logging entries, but there does not seem to
be any easy way of addressing this in a manner that works for both
python versions, so move ahead with the python3-only support from now
on.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-02-18 18:19:06 +02:00
Masashi Honma
432496cdd8 tests: Switch default python version to 3
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2019-02-17 17:26:01 +02:00
Jouni Malinen
258d88248b tests: AP VLAN based on SAE Password Identifier
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-17 17:24:23 +02:00
Jouni Malinen
b0e91e3877 SAE: VLAN assignment based on SAE Password Identifier
The new sae_password parameter [|vlanid=<VLAN ID>] can now be used to
assign stations to a specific VLAN based on which SAE Password
Identifier they use. This is similar to the WPA2-Enterprise case where
the RADIUS server can assign stations to different VLANs and the
WPA2-Personal case where vlanid parameter in wpa_psk_file is used.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-17 17:24:23 +02:00
Jouni Malinen
cf4643aa7d tests: Force diff chan in p2ps_channel_active_go_and_station_different_mcc
This test case was failing pretty frequently due to an issue in being
able to send out the Provision Discovery Response frame on the operating
channel. Now that wpa_supplicant has a fix for that issue, modify this
test case to hit this error condition every time. In addition, make sure
the possible exception from p2ps_exact_seek() does not get hidden with a
failing remove_group() call in the finally section.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-17 16:55:50 +02:00
Jouni Malinen
947b5a1532 P2P: Stop listen state if Action frame TX is needed on another channel
This speeds up P2P responses to frames received on an operating channel
in case there is an ongoing P2P listen operation on another channel.
This is applicable to drivers that support multiple channels in
concurrently.

This addresses an issue showing up in the
p2ps_channel_active_go_and_station_different_mcc test case where the
Provision Discovery Request frame can be received on the operating
channel of a group instead of the Listen channel. The response was
delayed until the listen operation timed out and this took too long time
for the peer to receive the response.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-17 16:53:03 +02:00
Jouni Malinen
b3e8ca65a6 P2P: Fix a typo in a debug message
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-17 16:24:34 +02:00
Jouni Malinen
e1348d21e9 tests: OpenSSL ECDH curve configuration
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-17 14:01:57 +02:00
Hristo Venev
464064c7e5 hostapd: Document openssl_ecdh_curves configuration parameter
Signed-off-by: Hristo Venev <hristo@venev.name>
2019-02-17 14:01:57 +02:00
Jouni Malinen
836f0ddac1 tests: EAP-PEAP/EAP-GTC
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-02-15 12:03:45 +02:00
Qun Zhang
31ee2992c7 Add QCA vendor subcmd/attribute to check wlan firmware state
Allow user space applications to check whether wlan firmware is alive
through an nl80211 vendor command.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-02-15 02:09:41 +02:00
Jouni Malinen
810dcfb667 tests: Wi-Fi generation indication for HT and VHT
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-02-15 02:09:41 +02:00
Jouni Malinen
3f8ceff54c Indicate wifi_generation in wpa_supplicant STATUS output
This adds a wifi_generation=4/5/6 line to the STATUS output if the
driver reports (Re)Association Request frame and (Re)Association
Response frame information elements in the association or connection
event. Only the generations 4 (HT = 802.11n), 5 (VHT = 802.11ac), and 6
(HE = 802.11ax) are reported.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-02-15 02:09:41 +02:00
Jouni Malinen
ccaf774767 Add HE Capabilities into ieee802_11_parse_elems()
This is needed to determine whether an association negotiated use of HE.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-02-15 02:09:41 +02:00
Jouni Malinen
5d68c0acd2 nl80211: (Re)Association Request frame IEs from association event
Process NL80211_ATTR_REQ_IE from the NL80211_CMD_ASSOCIATE event to
allow request IEs to be made available for the SME-in-wpa_supplicant
case similarly to how this is done with SME-in-driver with
NL80211_CMD_CONNECT.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-02-15 02:09:41 +02:00
Jouni Malinen
dd12e58e5f tests: ap_wpa_ie_parsing to allow EAPOL-Key msg 2/4 rejection
Once mac80211 starts reporting the used Association Request frame IEs in
the association event, wpa_supplicant will update RSN supplicant IE
information based on that and that will make the AP reject EAPOL-Key msg
2/4 in this particular test scenario due to the hack of including two
RSN IEs in the Association Request frame. Accept this sequence as a
valid test execution in addition to the previously expected connection
to avoid reporting incorrect failures.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-02-15 02:09:41 +02:00
Jouni Malinen
b4788908ca tests: AP VLAN based on PSK/passphrase
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-02-14 13:36:54 +02:00
Jouni Malinen
dbfa691df4 VLAN assignment based on used WPA/WPA2 passphrase/PSK
Extend wpa_psk_file to allow an optional VLAN ID to be specified with
"vlanid=<VLAN ID>" prefix on the line. If VLAN ID is specified and the
particular wpa_psk_file entry is used for a station, that station is
bound to the specified VLAN. This can be used to operate a single
WPA2-Personal BSS with multiple VLANs based on the used passphrase/PSK.
This is similar to the WPA2-Enterprise case where the RADIUS server can
assign stations to different VLANs.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-02-14 13:36:54 +02:00
Jouni Malinen
dd2aedeb55 HS 2.0 server: Add X-WFA-Hotspot20-Filtering header line to T&C
When filtering is successfully disabled at the end of the terms and
conditions acceptance sequence, add the "X-WFA-Hotspot20-Filtering:
remove" header line to the HTTP response.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-02-14 12:09:09 +02:00
Jouni Malinen
051c8cae6a tests: DPP and two initiators
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-02-14 11:50:40 +02:00
Jouni Malinen
fe468b0714 HE: Fix set_he_cap() parsing of config options for MU EDCA Params
When I replaced the POS() function with ffs() when applying relevant
parts from the original patch, this ended up breaking the frame
construction since the POS() function was supposed to count the bit
offset for the mask with 0 being the LSB instead of 1 returned by ffs().
Furthermore, ffs() is not available in all C libraries (e.g., not
directly exposed by strings.h on Android), so better not depend on that
or compiler builtins for this since there is no need for this to be as
fast as possible in configuration parsing.

Fix this with a simple function to determine the number of bits the
value needs to be shifted left to align with the mask.

Fixes: 11ce7a1bc3 ("HE: Add MU EDCA Parameter Set element (AP)")
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-02-12 01:23:30 +02:00
Jouni Malinen
6c02fa214b tests: AP not receiving Authentication frame ACK
Verify that the not-associated STA gets deauthenticated, not
disassociated, on inactivity timeout.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-02-11 17:42:59 +02:00
Jouni Malinen
f3a841bbff Do not disassociate not-associated STA on timeout
If the ap_handle_timer() timeout is reached for a not-associated STA, do
not default to disassociating that STA first since Disassociation frame
is not really appropriate to send to a STA that is not in associated
state. Instead, skip directly to deauthentication and STA entry removal.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-02-11 17:42:53 +02:00
Jouni Malinen
91205c8eb4 OpenSSL: Fix uninitialized variable in CRL reloading corner case
The flags variable needs to be initialized to 0 if check_crl is 0 in
the updated configuration.

Fixes: 159a7fbdea ("crl_reload_interval: Add CRL reloading support")
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-11 14:02:17 +02:00
Jouni Malinen
092a19222b Use for_each_element() in ieee802_11_parse_elems()
Use the new iteration macro to simplify the impelmentation and make it
more consistent with other IE parsers.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-11 13:51:11 +02:00
Johannes Berg
b50a638965 common: Use for_each_element_id/_extid for get_ie/get_ie_ext/get_vendor_ie
Simplifications based on the new iteration macros.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-11 13:37:22 +02:00
Johannes Berg
b644797429 common: Use for_each_element_id() in mb_ies_info_by_ies()
The change is bigger because here we need to catch the error
condition if the last element doesn't fit.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-11 13:37:22 +02:00
Johannes Berg
9008048f0f common: Use for_each_element_id() in ieee802_11_vendor_ie_concat()
Simple cleanup using the new iteration helper macro.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-11 13:37:22 +02:00
Johannes Berg
eb84238df6 common: Use for_each_element() in ieee802_11_ie_count()
Simple cleanup using the new macros.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-11 13:37:22 +02:00
Johannes Berg
0e0c31bdc5 common: Add strongly typed element iteration macros
Rather than always iterating elements from frames with pure
u8 pointers, add a type "struct element" that encapsulates
the id/datalen/data format of them.

Then, add the element iteration macros
 * for_each_element
 * for_each_element_id
 * for_each_element_extid

which take, as their first 'argument', such a structure and
iterate through a given u8 array interpreting it as elements.

While at it also add
 * for_each_subelement
 * for_each_subelement_id
 * for_each_subelement_extid

which instead of taking data/length just take an outer element
and use its data/datalen.

Also add for_each_element_completed() to determine if any of
the loops above completed, i.e., it was able to parse all of
the elements successfully and no data remained.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-11 13:37:22 +02:00
Masashi Honma
51c83edfca tests: Catch only specific exceptions
This allows unexpected cases to terminate parallel-vm.py without being
hidden by the exception handler.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2019-02-11 12:42:52 +02:00
Jouni Malinen
b623634262 tests: Document some of the test tools
This will hopefully make it easier for others to use these test tools.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-11 02:35:29 +02:00
Jouni Malinen
a4a9737d6b tests: Fix wnm-fuzzer by adding dummy configuration
Some of the WNM implementation expects configuration to be available
(e.g., ieee802_!1_rx_wnm_coloc_intf_req() dereferences wpa_s->conf), so
add a dummy configuration to allow the fuzzer tool to be used.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-11 02:35:29 +02:00
Jouni Malinen
525923b1d7 tests: EAPOL-Key fuzzing tool
Add test-eapol program that can be used for fuzzing the EAPOL-Key
Supplicant and Authenticator implementations. This tool can write
Supplicant or Authenticator messages into a file as an initialization
step and for the fuzzing step, that file (with potential modifications)
can be used to replace the internally generated message contents.

The TEST_FUZZ=y build parameter is used to make a special build where a
hardcoded random number generator and hardcoded timestamp are used to
force deterministic behavior for the EAPOL-Key operations. This will
also make the implementation ignore Key MIC and AES keywrap errors to
allow processing of modified messages to continue further.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-11 02:35:29 +02:00
Jouni Malinen
02a0a23939 RSN: Do not start preauthentication timer without candidates
There is no need to schedule the postponed RSN preauthentication start
if there are no candidates. Avoid wasting eloop resources for this.

This is most useful for fuzz testing of the 4-way handshake
implementation to avoid getting stuck waiting for this unnecessary one
second time when using eloop to coordinate the Authenticator and
Supplicant state machines.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-11 02:35:29 +02:00
Jouni Malinen
85611e967e eap_example: Update expired certificates
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-11 02:35:29 +02:00
Jouni Malinen
1e5506588d JSON: Fix string parsing when \\ escape is at the end of buffer
This would have resulted in reading one octet past the end of the buffer
before rejecting the string.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-11 02:35:29 +02:00
Jouni Malinen
0dedcb3154 JSON: Fix parsing of a number from the end of the buffer
Avoid reading one octet past the end of the buffer when parsing a number
that is at the very end of the buffer.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-11 02:35:29 +02:00
Jouni Malinen
79fa1b4530 tests: JSON parser fuzzer
test-json can be used for fuzz testing the JSON parser implementation in
src/utils/json.c.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-11 02:35:29 +02:00
Jouni Malinen
62269c8d8d TLS: Fix X.509 certificate name conversion into empty string
If none of the supported name attributes are present, the name string
was nul terminated only at the end. Add an explicit nul termination at
the end of the last written (or beginning of the buffer, if nothing is
written) to avoid writing uninitialized data to debug log.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-11 02:35:29 +02:00