Commit graph

1276 commits

Author SHA1 Message Date
Jouni Malinen
03948f423f Add CONFIG_IEEE80211N to wpa_supplicant defconfig
This is needed for AP mode functionality with some drivers.
2011-07-18 21:34:25 +03:00
Jouni Malinen
ffad885837 P2P: Set p2p auth/assoc parameter based on connection type
Fix the previous code that was hardcoding the p2p parameter based
on the driver P2P capability regardless of whether the connection
was really used for P2P or not.
2011-07-17 20:52:49 +03:00
Eliad Peller
2f4f73b154 nl80211: Change vif type to P2P_CLI upon P2P authentication
Currently, wpa_driver_nl80211_authenticate() changes the interface type
to station. However, in case of P2P, we need to change the interface
type to P2P_CLI.

Add p2p field to the authentication params, and consider it for choosing
the correct interface type.

Signed-off-by: Eliad Peller <eliad@wizery.com>
2011-07-17 20:25:58 +03:00
Jouni Malinen
7b7ce8aa13 Deauthenticate on reconfiguration
This makes sure that the old connection is not maintained if the new
configuration does not allow it anymore. In addition, it is better to
use wpa_supplicant_clear_connection() instead of just clearing
wpa_s->current_ssid here to keep things in sync.
2011-07-16 16:57:11 +03:00
Jouni Malinen
018a309a94 Drop oldest unknown BSS table entries first
When the BSS table size limit has been reached, drop first the oldest
BSS entries for which there is not a matching network in the
configuration based on SSID (wildcards are ignored). This makes it
less likely to hit connection issues in environments with huge number
of visible APs.
2011-07-16 13:22:58 +03:00
Jouni Malinen
04a85e4401 P2P: Filter Probe Request frames based on DA and BSSID in Listen state
Only accept Probe Request frames that have a Wildcard BSSID and a
destination address that matches with our P2P Device Address or is the
broadcast address per P2P specification 3.1.2.1.1.
2011-07-15 20:28:46 +03:00
Johannes Berg
6cd930cb3c P2P: Fix p2p_intra_bss with nl80211
The current implementation of p2p_intra_bss doesn't work since the flag
isn't propagated into the corresponding hostapd config, so AP code will
never enable AP isolation and will in fact disable it again after it had
been enabled by the P2P code.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-07-15 17:13:44 +03:00
Jouni Malinen
0d0db41271 P2P: Remove unused SearchOnly parameter from D-Bus p2p_find 2011-07-15 16:59:05 +03:00
Jouni Malinen
263ef84d3a P2P: Fix memory leak in D-Bus p2p_find handler 2011-07-15 16:33:21 +03:00
Jouni Malinen
e24b918202 P2P: Coding style cleanup 2011-07-15 14:41:01 +03:00
Jouni Malinen
70b9a5ca6a P2P: Fix error path not to build error message twice 2011-07-15 14:40:04 +03:00
Jouni Malinen
e1739fb617 P2P: Clear entry.key to avoid use of uninitialized value on error path 2011-07-15 14:39:07 +03:00
Jouni Malinen
d87e90b646 WPS: Check malloc success on workaround path
ssid->ssid could be NULL here if malloc failed, so better check that
consistently.
2011-07-15 14:21:50 +03:00
Jouni Malinen
21fe9e757e P2P: Use consistent checking of ssid != NULL 2011-07-15 14:20:31 +03:00
Jouni Malinen
f94a85ee33 P2P: Coding style cleanup for D-Bus handlers 2011-07-15 14:18:29 +03:00
Jouni Malinen
faa9f2cf95 P2P: Fix D-Bus error path (potential NULL pointer deref)
The paths pointer could have been NULL when going through the shared
freeing path in error case. Avoid the NULL pointer dereference by
checking whether that is the case. In addition, remove unnecessary
gotos to make the function more readable.
2011-07-15 14:03:41 +03:00
Jouni Malinen
ab1dee81a2 P2P: Remove dead code from wpas_p2p_connect()
The case of joining a running group is handled before this location
and the P2P client iftype is assigned at a callback function for that
case.
2011-07-15 13:57:31 +03:00
Henry Gebhardt
f0573c7989 wpa_supplicant: Edit BINDIR in dbus and systemd service files
This is useful, since in Gentoo BINDIR=/usr/sbin.
2011-07-15 12:25:02 +03:00
Henry Gebhardt
2ecaec50c8 wpa_supplicant: Add systemd support 2011-07-15 12:13:40 +03:00
Johannes Berg
b14a210ce2 nl80211: Support GTK rekey offload
Add support to wpa_supplicant for device-based GTK rekeying. In order to
support that, pass the KEK, KCK, and replay counter to the driver, and
handle rekey events that update the latter.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-07-12 21:22:51 +03:00
Mikael Wikström
ed49fbbf3a Fix non D-Bus builds by removing 'void void' in return value 2011-07-12 15:39:33 +03:00
Hong Wu
8fd0f0f323 FT: Clear SME ft_used/ft_ies when disconnecting
Previous ft_ies needs to be removed before supplicant starts a new FT
initial association and this requires the ft_used state to be cleared
here.

Signed-off-by: Hong Wu <hong.wu@dspg.com>
2011-07-05 21:17:31 +03:00
Angie Chinchilla
2db9174503 wpa_s AP mode: Enable HT20 if driver supports it
If the driver supports HT20, set the config parameter ieee80211n
to enable it. This does not enable HT40.

Signed-off-by: Angie Chinchilla <angie.v.chinchilla@intel.com>
2011-07-05 16:49:28 +03:00
Jouni Malinen
ca62e114aa wpa_supplicant AP: Disable AP mode on disassoc paths
Regardless of how the AP mode is disabled, wpa_supplicant_ap_deinit()
must be called. Make sure this happens on all paths by calling the
deinit function from wpa_supplicant_mark_disassoc().
2011-07-05 16:38:30 +03:00
Jouni Malinen
4f525d8e5b Move peer certificate wpa_msg() calls to notify.c
This type of wpa_supplicant specific message construction does not need
to be at the EAP implementation, so better move it up to notify.c.
2011-07-05 12:40:37 +03:00
Michael Chang
ade74830b4 Add dbus signal for information about server certification
In general, this patch attemps to extend commit
00468b4650 with dbus support.

This can be used by dbus client to implement subject match text
entry with preset value probed from server. This preset value, if
user accepts it, is remembered and passed to subject_match config
for any future authentication.

Signed-off-by: Michael Chang <mchang@novell.com>
2011-07-05 12:22:32 +03:00
Paul Stewart
572a171f4f wpa_supplicant: Respect PKG_CONFIG variable if set in the environment
This is required for cross-compilation support on certain
platforms to avoid changing the pkg-config files themselves.

Signed-off-by: David James <davidjames@chromium.org>
Signed-off-by: Paul Stewart <pstew@chromium.org>
2011-07-04 20:35:38 +03:00
Marcin Klimczewski
751bc722bd wpa_cli: Add missing parameter for P2P_GROUP_ADD command
Both freq and persistent parameters of P2P_GROUP_ADD could be passed at
one time.
2011-07-04 20:32:15 +03:00
Jayant Sane
a362dc1d43 DBus/P2P: Rectified type of SecondaryDeviceTypes in device property Get
To be consistent with what it expected in corresponding Set property as
byte[][].

Signed-off-by: Jayant Sane <jayant.sane@intel.com>
2011-07-04 20:27:53 +03:00
Jayant Sane
b05fe0e557 DBus/P2P: Adding decl for PersistentGroupRemoved signal
Minor - for completeness sake.

Signed-off-by: Jayant Sane <jayant.sane@intel.com>
2011-07-04 20:24:45 +03:00
Jouni Malinen
7a2b53b4ef Fix D-Bus build without CONFIG_P2P=y 2011-06-27 21:23:22 +03:00
Jouni Malinen
20a0b03deb Clear WPA and EAPOL state machine config pointer on network removal
Make sure that the WPA and EAPOL state machines do not hold a pointer
to a network configuration that is about to be freed. This can fix
potential issues with references to freed memory.
2011-06-27 19:02:24 +03:00
Jean-Michel.Bachot
8be6450cb6 P2P: Fix WpsFailed signal in P2P D-Bus
Fix a NULL pointer dereference in commit
3734552f15 in the case of PBC overlap and
timeout case.

Signed-off-by: Jean-Michel.Bachot <jean-michelx.bachot@intel.com>
Signed-off-by: Jayant Sane <jayant.sane@intel.com>
Signed-off-by: Angie Chinchilla <angie.v.chinchilla@intel.com>
2011-06-25 15:29:31 +03:00
Jayant Sane
2463ba70e2 P2P: Update listen and operating channel from P2P D-Bus
Some P2PDevice properties were not updated in p2p->cfg structure:
reg_class, channel, op_reg_class, and op_channel. Hence, update p2p->cfg
parameters through p2p core calls in wpas_p2p_update_config().

Signed-off-by: Jean-Michel.Bachot <jean-michelx.bachot@intel.com>
Signed-off-by: Jayant Sane <jayant.sane@intel.com>
2011-06-25 12:08:43 +03:00
Jayant Sane
3734552f15 P2P: Add WpsFailed signal in P2P D-Bus
Signal is triggered if an error occurs during WPS provisioning phase.

Signed-off-by: Jean-Michel.Bachot <jean-michelx.bachot@intel.com>
Signed-off-by: Jayant Sane <jayant.sane@intel.com>
2011-06-25 11:47:04 +03:00
Jayant Sane
2855070673 P2P: More complete persistent group management over D-Bus
Extend commit c2762e410f to allow
applications to manage (add/remove) persistent groups and accepted
network object paths while invoking a persistent group.
2011-06-24 11:20:19 +03:00
Jayant Sane
5d5fe8ed08 P2P: Add dissasoc_low_ack in P2P device properties
This can be used to activate the keep alive mechanism enabled in
mac80211. Allows to trigger Peer Disconnected signal if signal is lost
on a P2P peer.

Signed-off-by: Jean-Michel Bachot <jean-michelx.bachot@linux.intel.com>
Signed-off-by: Jayant Sane <jayant.sane@intel.com>
2011-06-23 21:35:20 +03:00
Jayant Sane
2a10959e7c P2P: Fix P2P device signal level type in D-Bus
Signed-off-by: Fabien Marotte <fabienx.marotte@intel.com>
Signed-off-by: Jayant Sane <jayant.sane@intel.com>
2011-06-23 21:31:22 +03:00
Jayant Sane
6402fc438b P2P: Show P2P peer signal level in D-Bus P2P device properties
Move level parameter from p2p_device to p2p_device_info in order to
expose this information and modify D-Bus P2P handler to return this new
parameter through the P2P device properties.

Signed-off-by: Fabien Marotte <fabienx.marotte@intel.com>
Signed-off-by: Jayant Sane <jayant.sane@intel.com>
2011-06-23 21:29:10 +03:00
Jayant Sane
c2762e410f P2P: Update D-Bus network object semantics during group formation
Do not emit network objects during P2P group formation since such
network objects can confuse certain apps. Instead, a persistent group
object is created to allow apps to keep track of persistent groups.
Persistent group objects only represent the info needed to recreate the
group.

Also fixes a minor bug in the handling of persistent group objects
during WPS operations.

Signed-off-by: Jayant Sane <jayant.sane@intel.com>
2011-06-23 21:25:13 +03:00
Jayant Sane
c988980d95 P2P: Enable P2P capability advertisement on D-Bus
Append "P2P" to capability information if supported by device.

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Jayant Sane <jayant.sane@intel.com>
2011-06-23 20:51:27 +03:00
Jouni Malinen
62b98282ba Fix CONFIG_NO_WPA_PASSPHRASE=y build
Need to define CONFIG_NO_PBKDF2 even though the crypto cleanup moved
the function to a separate file since there is conditional code in
wpa_supplicant/config.c. In addition, wpa_passphrase should not be
built at all if passphrase functionality is removed.
2011-06-23 19:53:45 +03:00
Jouni Malinen
4aced422d3 Add notes for CONFIG_WPS_ER build configuration option
[Bug 407]
2011-06-23 19:30:13 +03:00
Jouni Malinen
ee8ad5d849 Use nl80211 as an example instead of WEXT 2011-06-23 19:28:14 +03:00
Jouni Malinen
29fbc52251 Fix AP selection to check privacy mismatch and IBSS with WPA/RSN IE
These checks were previously skipped if the scan result included WPA
or RSN IE. However, that can result in selecting a network that does
not match local configuration in some cases.
2011-06-23 15:39:00 +03:00
Jouni Malinen
7dcdcfd68d P2P: Start GO without extra scan step
There are some corner cases, where the wpa_supplicant_req_scan() call
may end up scheduling a scan even if we are about to start a GO. Avoid
this by explicitly marking the GO network to be selected for the next
connection.
2011-06-21 11:47:03 +03:00
Jouni Malinen
692cb2266f Fix non-P2P D-Bus build 2011-06-20 09:02:41 +03:00
Jouni Malinen
634ce80246 Fix CONFIG_AP=y build without CONFIG_P2P=y 2011-06-20 08:58:32 +03:00
Jouni Malinen
83fa07226d DBus: Fix some typos on comments 2011-06-12 15:09:32 -07:00
Johannes Berg
9abafccc0d DBus: Add support for P2P primitives
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-06-12 15:08:19 -07:00
Johannes Berg
911e97e400 DBus: Refactor array adding, add binary arrays
Some new code we're working on will require the dbus type "aay" (an
array of arrays of bytes). To add this, refactor the array code to
reduce code duplication by given a type string to the array starting
code, and also add code to create and parse such arrays from or into an
array of struct wpabuf respectively.

Since there's no unique DBus type for this, add a "fake"
WPAS_DBUS_TYPE_BINARRAY type that is separate from the regular DBus
types for parsing.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-06-12 14:47:49 -07:00
Fabien Marotte
58f80e2aeb DBus: Move wpas_dbus_new_decompose_object_path()
Moved wpas_dbus_new_decompose_object_path from dbus_new_handlers.c
to dbus_new_helpers.c.

Signed-off-by: Fabien Marotte <fabienx.marotte@linux.intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-06-12 14:41:41 -07:00
Jean-Michel Bachot
4b6baa2f5e P2P: Add group started notification
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-06-12 14:35:37 -07:00
Johannes Berg
dd8a7e0547 P2P: Add wpas_notify_p2p_provision_discovery()
Add a notification for P2P provision discovery status/result.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-06-12 14:31:56 -07:00
Jouni Malinen
38e24575c1 random: Add support for maintaining internal entropy store over restarts
This can be used to avoid rejection of first two 4-way handshakes every
time hostapd (or wpa_supplicant in AP/IBSS mode) is restarted. A new
command line parameter, -e, can now be used to specify an entropy file
that will be used to maintain the needed state.
2011-05-31 20:07:11 +03:00
Jouni Malinen
ceb34f250a Remove compiler warning for non-P2P builds 2011-05-27 19:06:05 +03:00
Jouni Malinen
6d28fb9627 Fix regression in RSN pre-authentication candidate list generation
Processing of the scan results for RSN pre-authentication candidates
was moved to happen before the network was selected. This resulted in
all candidates being dropped due to no SSID having been configured.
Fix this by moving the processing to happen after the network has
been selected. Since the raw scan results are not available at that
point, use the BSS table instead of scan results to fetch the
information.
2011-05-19 17:52:46 +03:00
Dmitry Shmidt
bcb90f750d Add TDLS support to Android.mk 2011-05-16 22:29:43 +03:00
Jouni Malinen
64f992652d P2P: Include operating class 124 (channels 149,153,157,161)
When using the p2p_oper_reg_class configuration option instead of
p2p_group_add freq parameter, the operating class 124 was not
processed correctly. Include that class in the list of 5 GHz classes
for the p2p_oper_reg_class to resolve this.
2011-05-16 21:07:05 +03:00
Jouni Malinen
eec92ec597 WPS: Remove obsolete note about lack for WPS ER support 2011-05-16 21:06:08 +03:00
Jouni Malinen
117e812d06 Update BSS table entry if roaming event indicates frequency change
This is needed to make sure the frequency in the BSS table entry
remains up-to-date if the AP changes its operating frequency.
2011-05-16 19:19:30 +03:00
Jouni Malinen
0725cc7b7e Enable CONFIG_DRIVER_NL80211=y in the default configuration
nl80211 should be preferred over WEXT with any recent Linux kernel
version.
2011-04-21 20:41:01 +03:00
Dmitry Shmidt
60b24b0de4 Add 'signal_poll' command interface
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2011-04-15 18:52:01 +03:00
Dmitry Shmidt
746bba1a5e Prevent explicit scan command during scan or association
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2011-04-15 18:40:29 +03:00
Jouni Malinen
849b5dc78b Update driver country info on 'SET country <value>' 2011-04-15 17:00:01 +03:00
Jouni Malinen
4a26df7107 IBSS RSN: peer->addr is an array so it cannot be NULL 2011-04-14 20:18:12 +03:00
Jouni Malinen
95cb2d88e9 TDLS: Verify that scan results for BSS are available before using them 2011-04-14 19:50:26 +03:00
Jouni Malinen
5dac11e027 WPS: Use strict validation of (Re)AssocResp only if IEs are known 2011-04-14 02:57:24 +03:00
Jouni Malinen
b211f3eb71 Add sanity checks to EVENT_RX_PROBE_REQ event data
Both the SA and IEs from the received Probe Request frames must be
included and the Probe Request RX callback functions may assume that
these are not NULL.
2011-04-14 02:39:25 +03:00
Jouni Malinen
f4fbba8cf9 Distinguish empty concatenated vendor-specific IE from missing one
When comparing BSS table entries, handle empty concatenated
vendor-specific IE differently from completely missing IE. This
does not change anything for the only currently compared IE that
can be fragmented (WPS IE), but it is better to have the generic
code here ready for any possible new IE that could be used in
with zero-length data.
2011-04-14 02:25:43 +03:00
Jouni Malinen
714b8b5378 P2P: Fix memory leak in UPnP service discovery request processing 2011-04-14 01:33:26 +03:00
Jouni Malinen
62c0d27ed3 P2P: Clear go_dev_addr for group started events if it is not known
Better make sure the address value included in the event message gets
cleared in case the GO Device Address is not known for some reason.
Previously, this could potentially have been some random data from
stack should we ever hit the case where wpa_s->current_ssid is not
set (which should not really happen in normal use cases).
2011-04-13 22:03:52 +03:00
Jouni Malinen
be5b1e86a3 Make the example action script less likely to result in failures
Use "=" instead of "==" and add an example statement between "then"
and "fi".
2011-04-13 19:55:34 +03:00
Dmitry Shmidt
67b9bd089b Make scan interval configurable
It is now possible to configure the the time in seconds that
wpa_supplicant waits before requesting a new scan after failing to find
a suitable network in scan results.

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2011-04-11 23:14:38 +03:00
Jouni Malinen
c2197bc9bc Return NULL instead of 0 as the pointer on error case 2011-04-08 19:16:20 +03:00
Jouni Malinen
c2f1fe41c2 Fix WPA/WPA2 AP rejection on parameter mismatch
If WPA/WPA2 was enabled in the configuration, the non-WPA exception
could allow an incorrect AP to be selected from scan results. Do
not use the exception if WPA/WPA2 is enabled in configuration.
2011-04-08 19:13:58 +03:00
Sam Leffler
9768da202b dbus: Add support to get/set the country code
Add an Interface.Country property and support to get/set the value.

Signed-off-by: Sam Leffler <sleffler@chromium.org>
2011-04-05 01:24:26 +03:00
Jouni Malinen
e73edcaa6a wpa_s AP mode: Fix regression in P2P AP mode setup
Commit c76e5d7f9b moved the
ap_configured_cb() call into a completion callback from AP mode code.
However, this callback can be called before hostap_setup_interface()
returns. In that case, the ap_configured_cb() ended up getting
called before the wpa_supplicant connection information was updated.
Fix this by reordering code to set up everything before calling
hostapd_setup_interface().
2011-04-04 12:50:26 +03:00
Felix Fietkau
4378fc14eb nl80211: Send EAPOL frames as QoS data frames for QoS aware clients
This should fix EAPOL reauthentication and rekeying timeout issues
with Intel clients when using WMM (e.g., with IEEE 802.11n). These
stations do not seem to be able to handle EAPOL data frames as
non-QoS Data frames after the initial setup.

This adds STA flags to hapd_send_eapol() driver op to allow
driver_nl80211.c to mark the EAPOL frames as QoS Data frame
when injecting it through the monitor interface.
2011-04-02 22:03:05 +03:00
Paul Stewart
439efd1eac bgscan_simple: Reschedule first fast scan
If the scan interval switches to the short interval soon after a
scan, bgscan_simple should not immediately scan again. However,
it should also make sure that the next scan occurs no later than
the new, short scan interval.

Signed-off-by: Paul Stewart <pstew@google.com>
2011-03-31 18:06:09 +03:00
Paul Stewart
6d21d41125 bgscan_simple: Time out short scan interval
We gain diminishing returns by the short scan interval. The short
scan interval is used to hunt for a better AP if the RSSI of the
current AP drops. However, if we never roam, and the AP continues
to have low RSSI, at some point we should give up and return to
the slow background scan rate, otherwise we waste a lot of power.

Signed-off-by: Paul Stewart <pstew@google.com>
2011-03-31 18:04:48 +03:00
Paul Stewart
db03ddacff bgscan-simple: Poll for signal in init
It is not guaranteed that we will get a CQM signal shortly after setting
up monitoring. In order to establish the correct initial background
scanning rate, poll directly for the signal strength.

Signed-off-by: Paul Stewart
2011-03-31 18:02:37 +03:00
Paul Stewart
1c5c7273f5 driver: Function to directly poll signal quality
This provides a means for the supplicant to directly request signal
quality metrics from the driver. This is useful, for example for
background scan algorithms that might ask desire this information
out-of-band with CQM events.

Signed-off-by: Paul Stewart <pstew@google.com>
2011-03-31 17:56:48 +03:00
Paul Stewart
14dc00115e dbus: Add "excessive" to debug_strings
The "debug_strings" private array in dbus_new_handles.c has fallen out
of sync with wpa_debug.h. Add the new "excessive" level to the head of
the list, realigning everything.

Signed-off-by: Paul Stewart <pstew@google.com>
2011-03-31 17:38:08 +03:00
Jouni Malinen
b6e0180035 P2P: Add more WPS attributes into Listen state Probe Response
Configure more WPS attributes in the P2P module and use them
when generating WSC IE for Probe Response frames in Listen state.
2011-03-28 15:24:12 +03:00
Jouni Malinen
b8f64582e3 TDLS: Allow TDLS to be disabled at runtime for testing purposes
Control interface command 'SET tdls_disabled <1/0>' can now be used
to disable/enable TDLS at runtime. This is mainly for testing
purposes.
2011-03-24 20:44:17 +02:00
Jouni Malinen
78177a000e RSN IBSS: Restart IBSS state machines for each new IBSS
Change the old design of running a single long living RSN IBSS
instance to keep a separate instance for each IBSS connection.
This fixes number of issues in getting keys set properly for
new connections and is in general quite a bit more correct
design.
2011-03-23 21:15:46 +02:00
Jouni Malinen
d47fa330b8 random: Read /dev/random in the background with eloop read socket
This makes it more likely to be able to fetch the 20 octet seed from
/dev/random in cases where other programs may also be competing for
this.
2011-03-22 23:15:00 +02:00
Sam Leffler
78633c3709 wpa_supplicant: Parameterize BSS table expiration age + count
Replace compile-time BSS cache expiration age and scan count by config
parameters that can be set via wpa_cli and the new D-Bus API. The latter
is done with interface properties BSSExpireAge and BSSExpireCount.
2011-03-20 12:40:59 +02:00
Paul Stewart
cfe53c9aa5 wpa_supplicant: Start bgscan on COMPLETED, not ASSOCIATED
Move the code snippet to switch on bgscan over to wpa_supplicant.c
from event.c, so that it can be activated on wpa_supplicant_set_state().
Also create a centralized place to switch off bgscan. bgscan is now
turned on in COMPLETED, not ASSOCIATED.
2011-03-20 12:27:03 +02:00
Jouni Malinen
87880919ad Fix a typo in a comment 2011-03-20 12:15:02 +02:00
Sam Leffler
7c49fdd0bd dbus: Add RemoveAllNetworks to the new D-Bus API
This adds a new command to the interface to remove all configured
netblocks. Without this it's necessary to query properties on the
interface and explicitly remove each netblock.
2011-03-20 12:12:12 +02:00
Nathan Williams
bc8397822b wpa_supplicant: Search BSS list from back to front
This fixes an issue seen in our wifi testbed, where we frequently
switch the SSID of the AP. wpa_supplicant's BSS list will have, for
example both <bssid, "Check11b"> (from the previous test) and <bssid,
"Check11g"> (from the current test) - note that the bssid is the same for
both. The (old) D-Bus API for fetching scan responses from wpa_supplicant
is fetch-by-bssid, so the caller (flimflam) incorrectly believes we're
associated with <bssid, "Check11b">.
2011-03-20 12:06:36 +02:00
Sam Leffler
2b65b30da8 dbus: Add D-Bus methods to flush the BSS cache
Add an "Interface.FlushBSS" method to the new D-Bus API and a "flush"
method to the old API. Both take an age parameter that is a threshold
(in seconds) for selecting entries to evict. Setting this parameter
to zero flushes all entries from the cache.

This mechanism is useful for a connection manager to clear state at
startup and on resume (where the age parameter may be used to hold
onto recent/valid data).
2011-03-20 12:02:33 +02:00
Sam Leffler
d4c1ec56f1 dbus: Add ConfigFile to AddInterface properties
This provides feature parity with the old-style D-Bus API. Explicit
properties to control global parameters is preferred but until that
happens this allows doing things like setting pkcs11_engine_path and
pkcs11_module_path via D-Bus.
2011-03-20 11:52:57 +02:00
Jouni Malinen
fe885594ac Document CONFIG_DEBUG_SYSLOG and CONFIG_DEBUG_SYSLOG_FACILITY 2011-03-20 11:49:41 +02:00
Sam Leffler
3e1996216e Add support for setting the syslog facility from the config file
This enables setting the syslog facility at build time.
2011-03-20 11:48:42 +02:00
Johannes Berg
c76e5d7f9b wpa_s AP mode: complete only when setup is complete
The AP code might, currently only in the case of HT40, defer actual
enabling to after a scan. In this case, the wpa_s AP code gets confused.
Add a callback for it to use and make it use it to finish only when the
setup has actually completed.

With appropriate hacks in place this allows using HT40 in P2P mode.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-03-19 13:11:15 +02:00
Johannes Berg
c202f19c68 wpa_s AP mode: propagate scan event
When wpa_s scans in AP mode, it doesn't propagate the scan event to the
AP code, so that code can get stuck if it uses the callbacks there.
Simply call them where appropriate.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-03-19 13:08:08 +02:00
Jean-Michel Bachot
046ef4aa67 P2P: Add option for requested device type in P2P search/scan
With this, p2p_find can be extended to find certain requested device
types.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-03-19 12:57:46 +02:00