Commit graph

5009 commits

Author SHA1 Message Date
Jouni Malinen
518be614f1 SAE-PK: Advertise RSNXE capability bit in STA mode
Set the SAE-PK capability bit in RSNXE when sending out (Re)Association
Request frame for a network profile that allows use of SAE-PK.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-10 12:47:07 +03:00
Jouni Malinen
cc2d03601b HS 2.0: Use global pmf=2 for the created network block
Previously, PMF support was enabled in optional mode (ieee80211w=1) for
Hotspot 2.0 network blocks automatically. This did not consider the
global PMF parameter and unconditionally changed that value to optional.
Since the newly added network block had an explicit ieee80211w
parameter, this overrode the global parameter. To make this less
surprising, use the global pmf parameter value to select whether to add
network blocks for Hotspot 2.0 with PMF being optionally enabled (pmf=0
or pmf=1) or required (pmf=2).

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-09 00:55:13 +03:00
Subrat Dash
790026c3da Allow TX queue parameters to be configured for wpa_supplicant AP/P2P GO
Allow user to configure the TX queue parameters through the
wpa_supplicant configuration file similarly to the way these can be set
in hostapd.

Parse the tx_queue_* parameters in the wpa_supplicant configuration file
and update the TX queue configuration to the AP/P2P GO interface in the
function wpa_supplicant_create_ap().

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-09 00:29:42 +03:00
Jouni Malinen
fcef598ea2 Do not try to connect with zero-length SSID
It was possible to find a BSS to local network profile match for a BSS
entry that has no known SSID when going through some of the SSID
wildcard cases. At leas the OWE transition mode case without BSSID match
could result in hitting this. Zero-length SSID (i.e., wildcard SSID) is
not valid in (Re)Association Request frame, so such an association will
fail. Skip such a BSS to avoid known-to-be-failing association attempts.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-08 21:40:56 +03:00
Jouni Malinen
5f48d36b4a SAE-PK: Select SAE-PK network over SAE without PK
If there is an acceptable BSS with SAE-PK enabled in the same ESS,
select that over a BSS that does not enable SAE-PK when the network
profile uses automatic SAE-PK selection.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-07 16:49:07 +03:00
Jouni Malinen
d654ca24de Clean up wpa_scan_res_match()
Move the BSS-against-SSID matching into a separate helper function to
make this overly long function a bit more readable and to allow that
helper function to be used for other purposes.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-07 16:30:32 +03:00
Jouni Malinen
9ad010c290 SAE-PK: Allow automatic SAE-PK to be disabled
This replaces the previously used sae_pk_only configuration parameter
with a more generic sae_pk that can be used to specify how SAE-PK is
negotiated. The default behavior (sae_pk=0) is to automatically
negotiate SAE-PK whenever the AP supports it and the password is in
appropriate format. sae_pk=1 allows only SAE-PK to be used and sae_pk=2
disables SAE-PK completely.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-07 11:55:16 +03:00
Purushottam Kushwaha
85ca13ebcf wpa_cli: Add all_bss command to print all scan results (BSS entries)
The wpa_supplicant control interface returns maximum of 4 kB of response
data and, thus, limits maximum number of scan entries as part of
SCAN_RESULTS to approximately 60. Add a new all_bss command to use a
more robust iteration of the BSS table entries with the BSS command to
to get all scan entries and print them in the same format as the
scan_results command.

Signed-off-by: Purushottam Kushwaha <pkushwah@codeaurora.org>
2020-06-06 17:07:24 +03:00
Jouni Malinen
215b4d8a72 FT: Do not add PMKID to the driver for FT-EAP if caching is disabled
wpa_supplicant disables PMKSA caching with FT-EAP by default due to
known interoperability issues with APs. This is allowed only if the
network profile is explicitly enabling caching with
ft_eap_pmksa_caching=1. However, the PMKID for such PMKSA cache entries
was still being configured to the driver and it was possible for the
driver to build an RSNE with the PMKID for SME-in-driver cases. This
could result in hitting the interop issue with some APs.

Fix this by skipping PMKID configuration to the driver fot FT-EAP AKM if
ft_eap_pmksa_caching=1 is not used in the network profile so that the
driver and wpa_supplicant behavior are in sync for this.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-06 16:48:57 +03:00
Tanmay Garg
63653307df Add support for indicating missing driver AKM capability flags
Add support for missing driver AKM capability flags from the list of
RSN_AUTH_KEY_MGMT_* flags and make these available through the
'GET_CAPABILITY key_mgmt' control interface command.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-06 15:18:13 +03:00
Jouni Malinen
8d1cbaaff7 SAE-PK: Transition mode disabled indication processing
Allow AP to disable transition mode for SAE-PK (i.e., prevent SAE
authentication without SAE-PK).

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-06 15:18:13 +03:00
Jouni Malinen
a752695290 SAE: Add sae_h2e and sae_pk to wpa_supplicant STATUS command
This provides additional information on which options were used during
SAE authentication.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-06 15:18:13 +03:00
Jouni Malinen
cc22fb1b86 SAE: Move H2E and PK flags to main sae_data
This maintains knowledge of whether H2E or PK was used as part of the
SAE authentication beyond the removal of temporary state needed during
that authentication. This makes it easier to use information about which
kind of SAE authentication was used at higher layer functionality.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-06 15:18:13 +03:00
Jouni Malinen
bc908daace Document more network profile parameters
Some of the recently added wpa_supplicant network profile parameters
were not documented in wpa_supplicant.conf. Add these there based on the
documentation in config_ssid.h.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-06 15:18:13 +03:00
Jouni Malinen
1c846d647e SAE-PK: Allow SAE authentication without PK to be disabled
The new wpa_supplicant network profile parameter sae_pk_only=1 can now
be used to disable use of SAE authentication without SAE-PK.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-06 15:18:13 +03:00
Jouni Malinen
b6bcd74e53 Show SAE capabilities in control interface
Indicate local support for SAE H2E and SAE-PK.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-02 23:25:22 +03:00
Jouni Malinen
9bf576870e Show SAE flags in scan results
Indicate AP support for SAE H2E and SAE-PK in scan results.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-02 23:25:22 +03:00
Jouni Malinen
e7aeb6d8ac SAE-PK: STA functionality
This adds STA side functionality for SAE-PK. This version enables SAE-PK
automatically based on the configured SAE password value if the selected
AP advertises support for SAE-PK.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-02 23:25:22 +03:00
Jouni Malinen
6b9e99e571 SAE-PK: Extend SAE functionality for AP validation
This adds core SAE functionality for a new mode of using SAE with a
specially constructed password that contains a fingerprint for an AP
public key and that public key being used to validate an additional
signature in SAE confirm from the AP.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-02 23:25:22 +03:00
Jouni Malinen
8c1f61e820 OCV: Report OCI validation failures with OCV-FAILURE messages (STA)
Convert the previously used text log entries to use the more formal
OCV-FAILURE prefix and always send these as control interface events to
allow upper layers to get information about unexpected operating channel
mismatches.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-30 00:24:15 +03:00
Jouni Malinen
52579be860 OCV: Move "OCV failed" prefix to callers
Make reporting of OCV validation failure reasons more flexible by
removing the fixed prefix from ocv_verify_tx_params() output in
ocv_errorstr so that the caller can use whatever prefix or encapsulation
that is most appropriate for each case.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-25 18:34:59 +03:00
Vamsi Krishna
2d118f557a OCV: Add support to override channel info OCI element (STA)
To support the STA testbed role, the STA has to use specified channel
information in OCI element sent to the AP in EAPOL-Key msg 2/4, SA Query
Request, and SA Query Response frames. Add override parameters to use
the specified channel while populating OCI element in all these frames.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-25 18:01:44 +03:00
Jouni Malinen
c2080e8657 Clear current PMKSA cache selection on association/roam
It was possible for the RSN state machine to maintain old PMKSA cache
selection (sm->cur_pmksa) when roaming to another BSS based on
driver-based roaming indication. This could result in mismatching state
and unexpected behavior, e.g., with not generating a Suite B PMKSA cache
entry.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-25 16:25:50 +03:00
Davide Caratti
39f29f250a defconfig: Enable TDLS
Some distros (e.g., Debian and Arch) already build wpa_supplicant with
support for TDLS, and Fedora is about to enable this feature as well.
Set CONFIG_TDLS=y in wpa_supplicant default build configuration.

Signed-off-by: Davide Caratti <davide.caratti@gmail.com>
2020-05-17 16:10:03 +03:00
Jouni Malinen
4294d221d3 D-Bus: Increase introspection buffer size
It was apparently possible to hit the 20000 octet limit in some cases,
so increase the limit to avoid process termination due to insufficient
room for preparing a response to Introspect calls.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-05-16 21:46:24 +03:00
Jouni Malinen
79488da576 wolfssl: Do not hardcode include directory in wpa_supplicant build
This is not really appropriate for any kind of cross compilations and is
not really needed in general since system specific values can be set in
.config.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-05-16 21:07:45 +03:00
Jan Tojnar
0388992905 wpa_gui: Fix build with Inkscape 1.0
Inkscape 1.0 revamped their CLI flags, breaking the icon build.

https://wiki.inkscape.org/wiki/index.php?title=Using_the_Command_Line#Background

Signed-off-by: Jan Tojnar <jtojnar@gmail.com>
2020-05-16 16:13:33 +03:00
Jouni Malinen
7adea21d2f dpp-nfc: Enable hostapd beaconing for listen state
This is needed to be able to receive Public Action frames when hostapd
was initially started with start_disabled=1.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-15 14:46:41 +03:00
Jouni Malinen
134ad50b0e dpp-nfc: Clean up debug prints when handover select is received
If the local device becomes the handover selector, make the debug log
entries about client functionality not receiving the response clearer
since that is not really an error case.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-15 14:20:26 +03:00
Jouni Malinen
5d49c1bf7c dpp-nfc: Do not indicate a single channel 1 by default
Allow any channel to be used by not including a specific single channel
in the handover request without a need (for AP mode, use the current
operating channel). When sending out the handover select, pick a single
channel if no specific channel has been negotiated.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-15 14:17:40 +03:00
Jouni Malinen
d0e2d8091f dpp-nfc: Make handover request collision detection more robust
Wait up to 100 ms for own handover request transmission to succeed if
peer handover request is received, but own crn is not yet available.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-15 12:10:59 +03:00
Jouni Malinen
8791e7461c dpp-nfc: Write debug info to summary log
Convert most print() calls to use the summary() helper so that the
printed information gets written into a log file as well. In addition,
start using a mutex lock to synchronize debug prints between threads to
avoid merging of messages from different contexts.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-15 12:03:53 +03:00
Jouni Malinen
1e0bc897ab dpp-nfc: Collision detection for handover request
Address possible handover request collisions for cases where both
devices try to initiate handover simultaneously.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-15 02:26:01 +03:00
Jouni Malinen
9ad3fe9343 dpp-nfc: Start handover server regardless of init-on-touch setting
The previous version was trying to force the handover roles based on the
--init-on-touch parameter on both sides. That is fine for some test
scenarios, but not appropriate for more normal use cases. Change this
design to enable handover server in all cases and only control starting
of the handover client based on --init-on-touch.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-15 01:21:01 +03:00
Jouni Malinen
24efcdf74d dpp-nfc: Own MAC address fetching from hostapd
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-15 00:44:27 +03:00
Jouni Malinen
8f96f2c3b1 dpp-nfc: Be more graceful when wpa_supplicant is not available
Do not try to proceed with negotiated connection handover if
wpa_supplicant control interface is not available.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-15 00:31:32 +03:00
Jouni Malinen
0b04d3c578 dpp-nfc: Allow wpa_supplicant control interface directory to be set
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-14 21:52:09 +03:00
Jouni Malinen
69dfbe6a93 dpp-nfc: Use Configurator/Enrollee parameters with tag reading
This was previously done only for the negotiated connection handover
case, but the same parameters are useful for the tag reading cases (URI
record and static handover).

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-14 21:46:50 +03:00
Jouni Malinen
f85fb349fd dpp-nfc: More robust determination of the script directory
Make it more robust to import wpaspy regardless of how dpp-nfc.py is
being executed.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-14 21:29:25 +03:00
Jouni Malinen
44f7866784 Clean up GET_CAPABILITY handling of 'strict' argument
There is no need to maintain a pointer to the substring "strict"; use a
bool instead.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-12 17:33:54 +03:00
Veerendranath Jakkam
3790f3a6ee Use per-interface type driver key_mgmt capabilities when possible
Use key_mgmt_iftype instead of key_mgmt when the specific interface type
is known by the context of the operation.

Use per interface type AKM capabilities in capa.key_mgmt_iftype array
based on the wpa_supplicant context instead of using capa.key_mgmt to
determine the driver AKM capability.

Signed-off-by: Veerendranath Jakkam <vjakkam@codeaurora.org>
2020-05-12 17:33:54 +03:00
Veerendranath Jakkam
8d7502809c Allow per interface type AKM capabilities to be fetched
Add support to query per interface type AKM capabilities through the
control interface. For example, "GET_CAPABILITY key_mgmt
iftype=STATION".

Signed-off-by: Veerendranath Jakkam <vjakkam@codeaurora.org>
2020-05-12 17:33:54 +03:00
Jouni Malinen
db59827a3c DPP2: Extend TCP encapsulation case to support Configurator as Initiator
This allows DPP_AUTH_INIT to be used with tcp_addr=<dst> argument and
Configurator parameters to perform Configurator initiated DPP
provisioning over TCP. Similarly, DPP_CONTROLLER_START can now be used
to specify Configurator/Enrollee roles and extend Controller to work in
Enrollee role.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-12 14:48:49 +03:00
Jouni Malinen
0086c14528 DPP: Extend NFC bootstrapping script for more control by caller
Add more parameters to dpp-nfc.py to allow it to be used with more
detailed control by the caller. This allows Enrollee/Configurator roles
to be selected and Configurator parameters to be specified on the
command line.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-12 00:57:44 +03:00
Jouni Malinen
670e153377 DPP2: Fix DPP_CHIRP listen parameter value validation
Check the correct variable.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-11 17:28:09 +03:00
Jouni Malinen
3aaf269f67 DPP: Move TCP encapsulation into a separate source code file
This continues splitting dpp.c into smaller pieces.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-11 17:26:11 +03:00
Jouni Malinen
21c612017b DPP: Move configurator backup into a separate source code file
This continues splitting dpp.c into smaller pieces.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-11 17:26:11 +03:00
Jouni Malinen
fdbbb74064 DPP: Move authentication functionality into a separate source code file
This continues splitting dpp.c into smaller pieces.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-11 17:26:11 +03:00
Jouni Malinen
182f6ae905 DPP2: Remove reconfigured network
Do not leave behind the old network profile when reconfiguration is
completed successfully.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-11 17:26:11 +03:00
Jouni Malinen
3e48c5d4b4 DPP2: Reconfig Authentication Confirm processing
Extend Enrollee functionality to process Reconfig Authentication
Confirm message and start GAS client.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-11 17:26:11 +03:00